1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright 2007-2012 Freescale Semiconductor, Inc.
9 #include <asm/fsl_serdes.h>
11 DECLARE_GLOBAL_DATA_PTR;
14 * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
16 * Initialize controller and call the common driver/pci pci_hose_scan to
17 * scan for bridges and devices.
19 * Hose fields which need to be pre-initialized by board specific code:
29 #include <asm/fsl_pci.h>
31 #ifndef CONFIG_SYS_PCI_MEMORY_BUS
32 #define CONFIG_SYS_PCI_MEMORY_BUS 0
35 #ifndef CONFIG_SYS_PCI_MEMORY_PHYS
36 #define CONFIG_SYS_PCI_MEMORY_PHYS 0
39 #if defined(CONFIG_SYS_PCI_64BIT) && !defined(CONFIG_SYS_PCI64_MEMORY_BUS)
40 #define CONFIG_SYS_PCI64_MEMORY_BUS (64ull*1024*1024*1024)
43 /* Setup one inbound ATMU window.
45 * We let the caller decide what the window size should be
47 static void set_inbound_window(volatile pit_t *pi,
51 u32 sz = (__ilog2_u64(size) - 1);
52 #ifdef CONFIG_SYS_FSL_ERRATUM_A005434
55 u32 flag = PIWAR_LOCAL;
58 flag |= PIWAR_EN | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
60 out_be32(&pi->pitar, r->phys_start >> 12);
61 out_be32(&pi->piwbar, r->bus_start >> 12);
62 #ifdef CONFIG_SYS_PCI_64BIT
63 out_be32(&pi->piwbear, r->bus_start >> 44);
65 out_be32(&pi->piwbear, 0);
67 if (r->flags & PCI_REGION_PREFETCH)
69 out_be32(&pi->piwar, flag | sz);
72 int fsl_setup_hose(struct pci_controller *hose, unsigned long addr)
74 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) addr;
76 /* Reset hose to make sure its in a clean state */
77 memset(hose, 0, sizeof(struct pci_controller));
79 pci_setup_indirect(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
81 return fsl_is_pci_agent(hose);
84 static int fsl_pci_setup_inbound_windows(struct pci_controller *hose,
85 u64 out_lo, u8 pcie_cap,
88 struct pci_region *r = hose->regions + hose->region_count;
89 u64 sz = min((u64)gd->ram_size, (1ull << 32));
91 phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS;
92 pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS;
95 /* we have no space available for inbound memory mapping */
96 if (bus_start > out_lo) {
97 printf ("no space for inbound mapping of memory\n");
102 if ((bus_start + sz) > out_lo) {
103 sz = out_lo - bus_start;
104 debug ("limiting size to %llx\n", sz);
107 pci_sz = 1ull << __ilog2_u64(sz);
109 * we can overlap inbound/outbound windows on PCI-E since RX & TX
112 if ((pcie_cap == PCI_CAP_ID_EXP) && (pci_sz < sz)) {
113 debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
114 (u64)bus_start, (u64)phys_start, (u64)sz);
115 pci_set_region(r, bus_start, phys_start, sz,
116 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
117 PCI_REGION_PREFETCH);
119 /* if we aren't an exact power of two match, pci_sz is smaller
120 * round it up to the next power of two. We report the actual
121 * size to pci region tracking.
124 sz = 2ull << __ilog2_u64(sz);
126 set_inbound_window(pi--, r++, sz);
127 sz = 0; /* make sure we dont set the R2 window */
129 debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
130 (u64)bus_start, (u64)phys_start, (u64)pci_sz);
131 pci_set_region(r, bus_start, phys_start, pci_sz,
132 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
133 PCI_REGION_PREFETCH);
134 set_inbound_window(pi--, r++, pci_sz);
138 phys_start += pci_sz;
140 pci_sz = 1ull << __ilog2_u64(sz);
142 debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n",
143 (u64)bus_start, (u64)phys_start, (u64)pci_sz);
144 pci_set_region(r, bus_start, phys_start, pci_sz,
145 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
146 PCI_REGION_PREFETCH);
147 set_inbound_window(pi--, r++, pci_sz);
150 phys_start += pci_sz;
154 #if defined(CONFIG_PHYS_64BIT) && defined(CONFIG_SYS_PCI_64BIT)
156 * On 64-bit capable systems, set up a mapping for all of DRAM
157 * in high pci address space.
159 pci_sz = 1ull << __ilog2_u64(gd->ram_size);
160 /* round up to the next largest power of two */
161 if (gd->ram_size > pci_sz)
162 pci_sz = 1ull << (__ilog2_u64(gd->ram_size) + 1);
163 debug ("R64 bus_start: %llx phys_start: %llx size: %llx\n",
164 (u64)CONFIG_SYS_PCI64_MEMORY_BUS,
165 (u64)CONFIG_SYS_PCI_MEMORY_PHYS,
168 CONFIG_SYS_PCI64_MEMORY_BUS,
169 CONFIG_SYS_PCI_MEMORY_PHYS,
171 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
172 PCI_REGION_PREFETCH);
173 set_inbound_window(pi--, r++, pci_sz);
175 pci_sz = 1ull << __ilog2_u64(sz);
177 debug ("R2 bus_start: %llx phys_start: %llx size: %llx\n",
178 (u64)bus_start, (u64)phys_start, (u64)pci_sz);
179 pci_set_region(r, bus_start, phys_start, pci_sz,
180 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
181 PCI_REGION_PREFETCH);
184 phys_start += pci_sz;
185 set_inbound_window(pi--, r++, pci_sz);
189 #ifdef CONFIG_PHYS_64BIT
190 if (sz && (((u64)gd->ram_size) < (1ull << 32)))
191 printf("Was not able to map all of memory via "
192 "inbound windows -- %lld remaining\n", sz);
195 hose->region_count = r - hose->regions;
200 #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
201 static void fsl_pcie_boot_master(pit_t *pi)
203 /* configure inbound window for slave's u-boot image */
204 debug("PCIEBOOT - MASTER: Inbound window for slave's image; "
205 "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
206 (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
207 (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1,
208 CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
209 struct pci_region r_inbound;
210 u32 sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE)
212 pci_set_region(&r_inbound,
213 CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1,
214 CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
216 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
218 set_inbound_window(pi--, &r_inbound,
219 CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
221 /* configure inbound window for slave's u-boot image */
222 debug("PCIEBOOT - MASTER: Inbound window for slave's image; "
223 "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
224 (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
225 (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2,
226 CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
227 pci_set_region(&r_inbound,
228 CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2,
229 CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
231 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
233 set_inbound_window(pi--, &r_inbound,
234 CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
236 /* configure inbound window for slave's ucode and ENV */
237 debug("PCIEBOOT - MASTER: Inbound window for slave's "
239 "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
240 (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS,
241 (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS,
242 CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE);
243 sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE)
245 pci_set_region(&r_inbound,
246 CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS,
247 CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS,
249 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
251 set_inbound_window(pi--, &r_inbound,
252 CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE);
255 static void fsl_pcie_boot_master_release_slave(int port)
257 unsigned long release_addr;
259 /* now release slave's core 0 */
262 release_addr = CONFIG_SYS_PCIE1_MEM_VIRT
263 + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
265 #ifdef CONFIG_SYS_PCIE2_MEM_VIRT
267 release_addr = CONFIG_SYS_PCIE2_MEM_VIRT
268 + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
271 #ifdef CONFIG_SYS_PCIE3_MEM_VIRT
273 release_addr = CONFIG_SYS_PCIE3_MEM_VIRT
274 + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
281 if (release_addr != 0) {
282 out_be32((void *)release_addr,
283 CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK);
284 debug("PCIEBOOT - MASTER: "
285 "Release slave successfully! Now the slave should start up!\n");
287 debug("PCIEBOOT - MASTER: "
288 "Release slave failed!\n");
293 void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
295 u32 cfg_addr = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_addr;
296 u32 cfg_data = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_data;
300 int enabled, r, inbound = 0;
308 #if defined(CONFIG_FSL_PCIE_DISABLE_ASPM)
312 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)cfg_addr;
313 struct pci_region *reg = hose->regions + hose->region_count;
314 pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
316 /* Initialize ATMU registers based on hose regions and flags */
317 volatile pot_t *po = &pci->pot[1]; /* skip 0 */
320 u64 out_hi = 0, out_lo = -1ULL;
321 u32 pcicsrbar, pcicsrbar_sz;
323 pci_setup_indirect(hose, cfg_addr, cfg_data);
326 /* Configure the PCIE controller core clock ratio */
327 pci_hose_write_config_dword(hose, dev, 0x440,
328 ((gd->bus_clk / 1000000) *
329 (16 / PEX_CCB_DIV)) / 333);
331 block_rev = in_be32(&pci->block_rev1);
332 if (PEX_IP_BLK_REV_2_2 <= block_rev) {
333 pi = &pci->pit[2]; /* 0xDC0 */
335 pi = &pci->pit[3]; /* 0xDE0 */
338 /* Handle setup of outbound windows first */
339 for (r = 0; r < hose->region_count; r++) {
340 unsigned long flags = hose->regions[r].flags;
341 u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1);
343 flags &= PCI_REGION_SYS_MEMORY|PCI_REGION_TYPE;
344 if (flags != PCI_REGION_SYS_MEMORY) {
345 u64 start = hose->regions[r].bus_start;
346 u64 end = start + hose->regions[r].size;
348 out_be32(&po->powbar, hose->regions[r].phys_start >> 12);
349 out_be32(&po->potar, start >> 12);
350 #ifdef CONFIG_SYS_PCI_64BIT
351 out_be32(&po->potear, start >> 44);
353 out_be32(&po->potear, 0);
355 if (hose->regions[r].flags & PCI_REGION_IO) {
356 out_be32(&po->powar, POWAR_EN | sz |
357 POWAR_IO_READ | POWAR_IO_WRITE);
359 out_be32(&po->powar, POWAR_EN | sz |
360 POWAR_MEM_READ | POWAR_MEM_WRITE);
361 out_lo = min(start, out_lo);
362 out_hi = max(end, out_hi);
367 debug("Outbound memory range: %llx:%llx\n", out_lo, out_hi);
369 /* setup PCSRBAR/PEXCSRBAR */
370 pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
371 pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pcicsrbar_sz);
372 pcicsrbar_sz = ~pcicsrbar_sz + 1;
374 if (out_hi < (0x100000000ull - pcicsrbar_sz) ||
375 (out_lo > 0x100000000ull))
376 pcicsrbar = 0x100000000ull - pcicsrbar_sz;
378 pcicsrbar = (out_lo - pcicsrbar_sz) & -pcicsrbar_sz;
379 pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, pcicsrbar);
381 out_lo = min(out_lo, (u64)pcicsrbar);
383 debug("PCICSRBAR @ 0x%x\n", pcicsrbar);
385 pci_set_region(reg++, pcicsrbar, CONFIG_SYS_CCSRBAR_PHYS,
386 pcicsrbar_sz, PCI_REGION_SYS_MEMORY);
387 hose->region_count++;
389 /* see if we are a PCIe or PCI controller */
390 pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
391 pci_dcr = pcie_cap_pos + 0x08;
392 pci_dsr = pcie_cap_pos + 0x0a;
393 pci_lsr = pcie_cap_pos + 0x12;
395 pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
397 #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
398 /* boot from PCIE --master */
399 char *s = env_get("bootmaster");
401 sprintf(pcie, "PCIE%d", pci_info->pci_num);
403 if (s && (strcmp(s, pcie) == 0)) {
404 debug("PCIEBOOT - MASTER: Master port [ %d ] for pcie boot.\n",
406 fsl_pcie_boot_master((pit_t *)pi);
409 inbound = fsl_pci_setup_inbound_windows(hose,
410 out_lo, pcie_cap, pi);
414 inbound = fsl_pci_setup_inbound_windows(hose, out_lo, pcie_cap, pi);
417 for (r = 0; r < hose->region_count; r++)
418 debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n", r,
419 (u64)hose->regions[r].phys_start,
420 (u64)hose->regions[r].bus_start,
421 (u64)hose->regions[r].size,
422 hose->regions[r].flags);
424 pci_register_hose(hose);
425 pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */
426 hose->current_busno = hose->first_busno;
428 out_be32(&pci->pedr, 0xffffffff); /* Clear any errors */
429 out_be32(&pci->peer, ~0x20140); /* Enable All Error Interrupts except
430 * - Master abort (pci)
431 * - Master PERR (pci)
434 pci_hose_read_config_dword(hose, dev, pci_dcr, &temp32);
435 temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */
436 pci_hose_write_config_dword(hose, dev, pci_dcr, temp32);
438 #if defined(CONFIG_FSL_PCIE_DISABLE_ASPM)
439 pci_lcr = pcie_cap_pos + 0x10;
441 pci_hose_read_config_dword(hose, dev, pci_lcr, &temp32);
442 temp32 &= ~0x03; /* Disable ASPM */
443 pci_hose_write_config_dword(hose, dev, pci_lcr, temp32);
446 if (pcie_cap == PCI_CAP_ID_EXP) {
447 if (block_rev >= PEX_IP_BLK_REV_3_0) {
448 #define PEX_CSR0_LTSSM_MASK 0xFC
449 #define PEX_CSR0_LTSSM_SHIFT 2
450 ltssm = (in_be32(&pci->pex_csr0)
451 & PEX_CSR0_LTSSM_MASK) >> PEX_CSR0_LTSSM_SHIFT;
452 enabled = (ltssm == 0x11) ? 1 : 0;
453 #ifdef CONFIG_FSL_PCIE_RESET
455 /* assert PCIe reset */
456 setbits_be32(&pci->pdb_stat, 0x08000000);
457 (void) in_be32(&pci->pdb_stat);
459 /* clear PCIe reset */
460 clrbits_be32(&pci->pdb_stat, 0x08000000);
462 for (i = 0; i < 100 && ltssm < PCI_LTSSM_L0; i++) {
463 pci_hose_read_config_word(hose, dev, PCI_LTSSM,
469 /* pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); */
470 /* enabled = ltssm >= PCI_LTSSM_L0; */
471 pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm);
472 enabled = ltssm >= PCI_LTSSM_L0;
474 #ifdef CONFIG_FSL_PCIE_RESET
477 debug("....PCIe link error. " "LTSSM=0x%02x.", ltssm);
478 /* assert PCIe reset */
479 setbits_be32(&pci->pdb_stat, 0x08000000);
480 (void) in_be32(&pci->pdb_stat);
482 debug(" Asserting PCIe reset @%p = %x\n",
483 &pci->pdb_stat, in_be32(&pci->pdb_stat));
484 /* clear PCIe reset */
485 clrbits_be32(&pci->pdb_stat, 0x08000000);
487 for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) {
488 pci_hose_read_config_word(hose, dev, PCI_LTSSM,
491 debug("....PCIe link error. "
492 "LTSSM=0x%02x.\n", ltssm);
494 enabled = ltssm >= PCI_LTSSM_L0;
496 /* we need to re-write the bar0 since a reset will
499 pci_hose_write_config_dword(hose, dev,
500 PCI_BASE_ADDRESS_0, pcicsrbar);
505 #ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
507 serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
508 temp32 = in_be32(&srds_regs->srdspccr0);
510 if ((temp32 >> 28) == 3) {
513 out_be32(&srds_regs->srdspccr0, 2 << 28);
514 setbits_be32(&pci->pdb_stat, 0x08000000);
515 in_be32(&pci->pdb_stat);
517 clrbits_be32(&pci->pdb_stat, 0x08000000);
519 for (i=0; i < 100 && ltssm < PCI_LTSSM_L0; i++) {
520 pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm);
523 enabled = ltssm >= PCI_LTSSM_L0;
528 /* Let the user know there's no PCIe link for root
529 * complex. for endpoint, the link may not setup, so
530 * print undetermined.
532 if (fsl_is_pci_agent(hose))
533 printf("undetermined, regs @ 0x%lx\n", pci_info->regs);
535 printf("no link, regs @ 0x%lx\n", pci_info->regs);
536 hose->last_busno = hose->first_busno;
540 out_be32(&pci->pme_msg_det, 0xffffffff);
541 out_be32(&pci->pme_msg_int_en, 0xffffffff);
543 /* Print the negotiated PCIe link width */
544 pci_hose_read_config_word(hose, dev, pci_lsr, &temp16);
545 printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4,
546 (temp16 & 0xf), pci_info->regs);
548 hose->current_busno++; /* Start scan with secondary */
549 pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
552 #ifdef CONFIG_SYS_FSL_ERRATUM_A007815
553 /* The Read-Only Write Enable bit defaults to 1 instead of 0.
554 * Set to 0 to protect the read-only registers.
556 clrbits_be32(&pci->dbi_ro_wr_en, 0x01);
559 /* Use generic setup_device to initialize standard pci regs,
560 * but do not allocate any windows since any BAR found (such
561 * as PCSRBAR) is not in this cpu's memory space.
563 pciauto_setup_device(hose, dev, 0, hose->pci_mem,
564 hose->pci_prefetch, hose->pci_io);
567 pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16);
568 pci_hose_write_config_word(hose, dev, PCI_COMMAND,
569 temp16 | PCI_COMMAND_MEMORY);
572 #ifndef CONFIG_PCI_NOSCAN
573 if (!fsl_is_pci_agent(hose)) {
574 debug(" Scanning PCI bus %02x\n",
575 hose->current_busno);
576 hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno);
578 debug(" Not scanning PCI bus %02x. PI=%x\n",
579 hose->current_busno, temp8);
580 hose->last_busno = hose->current_busno;
583 /* if we are PCIe - update limit regs and subordinate busno
584 * for the virtual P2P bridge
586 if (pcie_cap == PCI_CAP_ID_EXP) {
587 pciauto_postscan_setup_bridge(hose, dev, hose->last_busno);
590 hose->last_busno = hose->current_busno;
593 /* Clear all error indications */
594 if (pcie_cap == PCI_CAP_ID_EXP)
595 out_be32(&pci->pme_msg_det, 0xffffffff);
596 out_be32(&pci->pedr, 0xffffffff);
598 pci_hose_read_config_word(hose, dev, pci_dsr, &temp16);
600 pci_hose_write_config_word(hose, dev, pci_dsr, 0xffff);
603 pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16);
605 pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
609 int fsl_is_pci_agent(struct pci_controller *hose)
613 pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
615 pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
616 pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
617 if (pcie_cap == PCI_CAP_ID_EXP) {
620 pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE,
622 return (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL;
626 pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if);
627 /* Programming Interface (PCI_CLASS_PROG)
628 * 0 == pci host or pcie root-complex,
629 * 1 == pci agent or pcie end-point
631 return (prog_if == FSL_PROG_IF_AGENT);
635 int fsl_pci_init_port(struct fsl_pci_info *pci_info,
636 struct pci_controller *hose, int busno)
638 volatile ccsr_fsl_pci_t *pci;
639 struct pci_region *r;
640 pci_dev_t dev = PCI_BDF(busno,0,0);
644 pci = (ccsr_fsl_pci_t *) pci_info->regs;
646 /* on non-PCIe controllers we don't have pme_msg_det so this code
647 * should do nothing since the read will return 0
649 if (in_be32(&pci->pme_msg_det)) {
650 out_be32(&pci->pme_msg_det, 0xffffffff);
651 debug (" with errors. Clearing. Now 0x%08x",
655 r = hose->regions + hose->region_count;
657 /* outbound memory */
671 hose->region_count = r - hose->regions;
672 hose->first_busno = busno;
674 fsl_pci_init(hose, pci_info);
676 if (fsl_is_pci_agent(hose)) {
677 fsl_pci_config_unlock(hose);
678 hose->last_busno = hose->first_busno;
679 #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
681 /* boot from PCIE --master releases slave's core 0 */
682 char *s = env_get("bootmaster");
684 sprintf(pcie, "PCIE%d", pci_info->pci_num);
686 if (s && (strcmp(s, pcie) == 0))
687 fsl_pcie_boot_master_release_slave(pci_info->pci_num);
691 pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
692 pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
693 printf("PCI%s%x: Bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ?
694 "e" : "", pci_info->pci_num,
695 hose->first_busno, hose->last_busno);
696 return(hose->last_busno + 1);
699 /* Enable inbound PCI config cycles for agent/endpoint interface */
700 void fsl_pci_config_unlock(struct pci_controller *hose)
702 pci_dev_t dev = PCI_BDF(hose->first_busno,0,0);
707 if (!fsl_is_pci_agent(hose))
710 pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
711 pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
712 if (pcie_cap != 0x0) {
713 ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)hose->cfg_addr;
714 u32 block_rev = in_be32(&pci->block_rev1);
715 /* PCIe - set CFG_READY bit of Configuration Ready Register */
716 if (block_rev >= PEX_IP_BLK_REV_3_0)
717 setbits_be32(&pci->config, FSL_PCIE_V3_CFG_RDY);
719 pci_hose_write_config_byte(hose, dev,
720 FSL_PCIE_CFG_RDY, 0x1);
722 /* PCI - clear ACL bit of PBFR */
723 pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr);
725 pci_hose_write_config_word(hose, dev, FSL_PCI_PBFR, pbfr);
729 #if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || \
730 defined(CONFIG_PCIE3) || defined(CONFIG_PCIE4)
731 int fsl_configure_pcie(struct fsl_pci_info *info,
732 struct pci_controller *hose,
733 const char *connected, int busno)
737 set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law);
738 set_next_law(info->io_phys, law_size_bits(info->io_size), info->law);
740 is_endpoint = fsl_setup_hose(hose, info->regs);
741 printf("PCIe%u: %s", info->pci_num,
742 is_endpoint ? "Endpoint" : "Root Complex");
744 printf(" of %s", connected);
747 return fsl_pci_init_port(info, hose, busno);
750 #if defined(CONFIG_FSL_CORENET)
751 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
752 #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1
753 #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2
754 #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3
755 #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4
757 #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1
758 #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2
759 #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3
760 #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4
762 #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
763 #elif defined(CONFIG_MPC85xx)
764 #define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE
765 #define _DEVDISR_PCIE2 MPC85xx_DEVDISR_PCIE2
766 #define _DEVDISR_PCIE3 MPC85xx_DEVDISR_PCIE3
767 #define _DEVDISR_PCIE4 0
768 #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
769 #elif defined(CONFIG_MPC86xx)
770 #define _DEVDISR_PCIE1 MPC86xx_DEVDISR_PCIE1
771 #define _DEVDISR_PCIE2 MPC86xx_DEVDISR_PCIE2
772 #define _DEVDISR_PCIE3 0
773 #define _DEVDISR_PCIE4 0
774 #define CONFIG_SYS_MPC8xxx_GUTS_ADDR \
775 (&((immap_t *)CONFIG_SYS_IMMR)->im_gur)
777 #error "No defines for DEVDISR_PCIE"
780 /* Implement a dummy function for those platforms w/o SERDES */
781 static const char *__board_serdes_name(enum srds_prtcl device)
784 #ifdef CONFIG_SYS_PCIE1_NAME
786 return CONFIG_SYS_PCIE1_NAME;
788 #ifdef CONFIG_SYS_PCIE2_NAME
790 return CONFIG_SYS_PCIE2_NAME;
792 #ifdef CONFIG_SYS_PCIE3_NAME
794 return CONFIG_SYS_PCIE3_NAME;
796 #ifdef CONFIG_SYS_PCIE4_NAME
798 return CONFIG_SYS_PCIE4_NAME;
807 __attribute__((weak, alias("__board_serdes_name"))) const char *
808 board_serdes_name(enum srds_prtcl device);
810 static u32 devdisr_mask[] = {
817 int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev,
818 struct fsl_pci_info *pci_info)
820 struct pci_controller *hose;
821 int num = dev - PCIE1;
823 hose = calloc(1, sizeof(struct pci_controller));
827 if (is_serdes_configured(dev) && !(devdisr & devdisr_mask[num])) {
828 busno = fsl_configure_pcie(pci_info, hose,
829 board_serdes_name(dev), busno);
831 printf("PCIe%d: disabled\n", num + 1);
837 int fsl_pcie_init_board(int busno)
839 struct fsl_pci_info pci_info;
840 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
844 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
845 addr = &gur->devdisr3;
847 addr = &gur->devdisr;
849 devdisr = in_be32(addr);
852 SET_STD_PCIE_INFO(pci_info, 1);
853 busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info);
855 setbits_be32(addr, _DEVDISR_PCIE1); /* disable */
859 SET_STD_PCIE_INFO(pci_info, 2);
860 busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info);
862 setbits_be32(addr, _DEVDISR_PCIE2); /* disable */
866 SET_STD_PCIE_INFO(pci_info, 3);
867 busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info);
869 setbits_be32(addr, _DEVDISR_PCIE3); /* disable */
873 SET_STD_PCIE_INFO(pci_info, 4);
874 busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info);
876 setbits_be32(addr, _DEVDISR_PCIE4); /* disable */
882 int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev,
883 struct fsl_pci_info *pci_info)
888 int fsl_pcie_init_board(int busno)
894 #ifdef CONFIG_OF_BOARD_SETUP
895 #include <linux/libfdt.h>
896 #include <fdt_support.h>
898 void ft_fsl_pci_setup(void *blob, const char *pci_compat,
899 unsigned long ctrl_addr)
903 phys_addr_t p_ctrl_addr = (phys_addr_t)ctrl_addr;
904 struct pci_controller *hose;
906 hose = find_hose_by_cfg_addr((void *)(ctrl_addr));
908 /* convert ctrl_addr to true physical address */
909 p_ctrl_addr = (phys_addr_t)ctrl_addr - CONFIG_SYS_CCSRBAR;
910 p_ctrl_addr += CONFIG_SYS_CCSRBAR_PHYS;
912 off = fdt_node_offset_by_compat_reg(blob, pci_compat, p_ctrl_addr);
917 /* We assume a cfg_addr not being set means we didn't setup the controller */
918 if ((hose == NULL) || (hose->cfg_addr == NULL)) {
919 fdt_del_node(blob, off);
922 bus_range[1] = hose->last_busno - hose->first_busno;
923 fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4);
924 fdt_pci_dma_ranges(blob, off, hose);