drivers/nfc/pn544/i2c.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * I2C Link Layer for PN544 HCI based Driver
   4  *
   5  * Copyright (C) 2012  Intel Corporation. All rights reserved.
   6  */
   7
   8 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
   9
  10 #include <linux/crc-ccitt.h>
  11 #include <linux/module.h>
  12 #include <linux/i2c.h>
  13 #include <linux/acpi.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/delay.h>
  16 #include <linux/nfc.h>
  17 #include <linux/firmware.h>
  18 #include <linux/gpio/consumer.h>
  19
  20 #include <asm/unaligned.h>
  21
  22 #include <net/nfc/hci.h>
  23 #include <net/nfc/llc.h>
  24 #include <net/nfc/nfc.h>
  25
  26 #include "pn544.h"
  27
  28 #define PN544_I2C_FRAME_HEADROOM 1
  29 #define PN544_I2C_FRAME_TAILROOM 2
  30
  31 /* GPIO names */
  32 #define PN544_GPIO_NAME_IRQ "pn544_irq"
  33 #define PN544_GPIO_NAME_FW  "pn544_fw"
  34 #define PN544_GPIO_NAME_EN  "pn544_en"
  35
  36 /* framing in HCI mode */
  37 #define PN544_HCI_I2C_LLC_LEN           1
  38 #define PN544_HCI_I2C_LLC_CRC           2
  39 #define PN544_HCI_I2C_LLC_LEN_CRC       (PN544_HCI_I2C_LLC_LEN + \
  40                                          PN544_HCI_I2C_LLC_CRC)
  41 #define PN544_HCI_I2C_LLC_MIN_SIZE      (1 + PN544_HCI_I2C_LLC_LEN_CRC)
  42 #define PN544_HCI_I2C_LLC_MAX_PAYLOAD   29
  43 #define PN544_HCI_I2C_LLC_MAX_SIZE      (PN544_HCI_I2C_LLC_LEN_CRC + 1 + \
  44                                          PN544_HCI_I2C_LLC_MAX_PAYLOAD)
  45
  46 static const struct i2c_device_id pn544_hci_i2c_id_table[] = {
  47         {"pn544", 0},
  48         {}
  49 };
  50
  51 MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table);
  52
  53 static const struct acpi_device_id pn544_hci_i2c_acpi_match[] = {
  54         {"NXP5440", 0},
  55         {}
  56 };
  57
  58 MODULE_DEVICE_TABLE(acpi, pn544_hci_i2c_acpi_match);
  59
  60 #define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c"
  61
  62 /*
  63  * Exposed through the 4 most significant bytes
  64  * from the HCI SW_VERSION first byte, a.k.a.
  65  * SW RomLib.
  66  */
  67 #define PN544_HW_VARIANT_C2 0xa
  68 #define PN544_HW_VARIANT_C3 0xb
  69
  70 #define PN544_FW_CMD_RESET 0x01
  71 #define PN544_FW_CMD_WRITE 0x08
  72 #define PN544_FW_CMD_CHECK 0x06
  73 #define PN544_FW_CMD_SECURE_WRITE 0x0C
  74 #define PN544_FW_CMD_SECURE_CHUNK_WRITE 0x0D
  75
  76 struct pn544_i2c_fw_frame_write {
  77         u8 cmd;
  78         u16 be_length;
  79         u8 be_dest_addr[3];
  80         u16 be_datalen;
  81         u8 data[];
  82 } __packed;
  83
  84 struct pn544_i2c_fw_frame_check {
  85         u8 cmd;
  86         u16 be_length;
  87         u8 be_start_addr[3];
  88         u16 be_datalen;
  89         u16 be_crc;
  90 } __packed;
  91
  92 struct pn544_i2c_fw_frame_response {
  93         u8 status;
  94         u16 be_length;
  95 } __packed;
  96
  97 struct pn544_i2c_fw_blob {
  98         u32 be_size;
  99         u32 be_destaddr;
 100         u8 data[];
 101 };
 102
 103 struct pn544_i2c_fw_secure_frame {
 104         u8 cmd;
 105         u16 be_datalen;
 106         u8 data[];
 107 } __packed;
 108
 109 struct pn544_i2c_fw_secure_blob {
 110         u64 header;
 111         u8 data[];
 112 };
 113
 114 #define PN544_FW_CMD_RESULT_TIMEOUT 0x01
 115 #define PN544_FW_CMD_RESULT_BAD_CRC 0x02
 116 #define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08
 117 #define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B
 118 #define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11
 119 #define PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND 0x13
 120 #define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18
 121 #define PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR 0x19
 122 #define PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR 0x1D
 123 #define PN544_FW_CMD_RESULT_MEMORY_ERROR 0x20
 124 #define PN544_FW_CMD_RESULT_CHUNK_OK 0x21
 125 #define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74
 126 #define PN544_FW_CMD_RESULT_COMMAND_REJECTED 0xE0
 127 #define PN544_FW_CMD_RESULT_CHUNK_ERROR 0xE6
 128
 129 #define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
 130
 131 #define PN544_FW_WRITE_BUFFER_MAX_LEN 0x9f7
 132 #define PN544_FW_I2C_MAX_PAYLOAD PN544_HCI_I2C_LLC_MAX_SIZE
 133 #define PN544_FW_I2C_WRITE_FRAME_HEADER_LEN 8
 134 #define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\
 135                                          PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\
 136                                          PN544_FW_WRITE_BUFFER_MAX_LEN)
 137 #define PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN 3
 138 #define PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN (PN544_FW_I2C_MAX_PAYLOAD -\
 139                         PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN)
 140 #define PN544_FW_SECURE_FRAME_HEADER_LEN 3
 141 #define PN544_FW_SECURE_BLOB_HEADER_LEN 8
 142
 143 #define FW_WORK_STATE_IDLE 1
 144 #define FW_WORK_STATE_START 2
 145 #define FW_WORK_STATE_WAIT_WRITE_ANSWER 3
 146 #define FW_WORK_STATE_WAIT_CHECK_ANSWER 4
 147 #define FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER 5
 148
 149 struct pn544_i2c_phy {
 150         struct i2c_client *i2c_dev;
 151         struct nfc_hci_dev *hdev;
 152
 153         struct gpio_desc *gpiod_en;
 154         struct gpio_desc *gpiod_fw;
 155
 156         unsigned int en_polarity;
 157
 158         u8 hw_variant;
 159
 160         struct work_struct fw_work;
 161         int fw_work_state;
 162         char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
 163         const struct firmware *fw;
 164         u32 fw_blob_dest_addr;
 165         size_t fw_blob_size;
 166         const u8 *fw_blob_data;
 167         size_t fw_written;
 168         size_t fw_size;
 169
 170         int fw_cmd_result;
 171
 172         int powered;
 173         int run_mode;
 174
 175         int hard_fault;         /*
 176                                  * < 0 if hardware error occured (e.g. i2c err)
 177                                  * and prevents normal operation.
 178                                  */
 179 };
 180
 181 #define I2C_DUMP_SKB(info, skb)                                 \
 182 do {                                                            \
 183         pr_debug("%s:\n", info);                                \
 184         print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \
 185                        16, 1, (skb)->data, (skb)->len, 0);      \
 186 } while (0)
 187
 188 static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy)
 189 {
 190         int polarity, retry, ret;
 191         char rset_cmd[] = { 0x05, 0xF9, 0x04, 0x00, 0xC3, 0xE5 };
 192         int count = sizeof(rset_cmd);
 193
 194         nfc_info(&phy->i2c_dev->dev, "Detecting nfc_en polarity\n");
 195
 196         /* Disable fw download */
 197         gpiod_set_value_cansleep(phy->gpiod_fw, 0);
 198
 199         for (polarity = 0; polarity < 2; polarity++) {
 200                 phy->en_polarity = polarity;
 201                 retry = 3;
 202                 while (retry--) {
 203                         /* power off */
 204                         gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
 205                         usleep_range(10000, 15000);
 206
 207                         /* power on */
 208                         gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
 209                         usleep_range(10000, 15000);
 210
 211                         /* send reset */
 212                         dev_dbg(&phy->i2c_dev->dev, "Sending reset cmd\n");
 213                         ret = i2c_master_send(phy->i2c_dev, rset_cmd, count);
 214                         if (ret == count) {
 215                                 nfc_info(&phy->i2c_dev->dev,
 216                                          "nfc_en polarity : active %s\n",
 217                                          (polarity == 0 ? "low" : "high"));
 218                                 goto out;
 219                         }
 220                 }
 221         }
 222
 223         nfc_err(&phy->i2c_dev->dev,
 224                 "Could not detect nfc_en polarity, fallback to active high\n");
 225
 226 out:
 227         gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
 228 }
 229
 230 static void pn544_hci_i2c_enable_mode(struct pn544_i2c_phy *phy, int run_mode)
 231 {
 232         gpiod_set_value_cansleep(phy->gpiod_fw, run_mode == PN544_FW_MODE ? 1 : 0);
 233         gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
 234         usleep_range(10000, 15000);
 235
 236         phy->run_mode = run_mode;
 237 }
 238
 239 static int pn544_hci_i2c_enable(void *phy_id)
 240 {
 241         struct pn544_i2c_phy *phy = phy_id;
 242
 243         pr_info("%s\n", __func__);
 244
 245         pn544_hci_i2c_enable_mode(phy, PN544_HCI_MODE);
 246
 247         phy->powered = 1;
 248
 249         return 0;
 250 }
 251
 252 static void pn544_hci_i2c_disable(void *phy_id)
 253 {
 254         struct pn544_i2c_phy *phy = phy_id;
 255
 256         gpiod_set_value_cansleep(phy->gpiod_fw, 0);
 257         gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
 258         usleep_range(10000, 15000);
 259
 260         gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
 261         usleep_range(10000, 15000);
 262
 263         gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
 264         usleep_range(10000, 15000);
 265
 266         phy->powered = 0;
 267 }
 268
 269 static void pn544_hci_i2c_add_len_crc(struct sk_buff *skb)
 270 {
 271         u16 crc;
 272         int len;
 273
 274         len = skb->len + 2;
 275         *(u8 *)skb_push(skb, 1) = len;
 276
 277         crc = crc_ccitt(0xffff, skb->data, skb->len);
 278         crc = ~crc;
 279         skb_put_u8(skb, crc & 0xff);
 280         skb_put_u8(skb, crc >> 8);
 281 }
 282
 283 static void pn544_hci_i2c_remove_len_crc(struct sk_buff *skb)
 284 {
 285         skb_pull(skb, PN544_I2C_FRAME_HEADROOM);
 286         skb_trim(skb, PN544_I2C_FRAME_TAILROOM);
 287 }
 288
 289 /*
 290  * Writing a frame must not return the number of written bytes.
 291  * It must return either zero for success, or <0 for error.
 292  * In addition, it must not alter the skb
 293  */
 294 static int pn544_hci_i2c_write(void *phy_id, struct sk_buff *skb)
 295 {
 296         int r;
 297         struct pn544_i2c_phy *phy = phy_id;
 298         struct i2c_client *client = phy->i2c_dev;
 299
 300         if (phy->hard_fault != 0)
 301                 return phy->hard_fault;
 302
 303         usleep_range(3000, 6000);
 304
 305         pn544_hci_i2c_add_len_crc(skb);
 306
 307         I2C_DUMP_SKB("i2c frame written", skb);
 308
 309         r = i2c_master_send(client, skb->data, skb->len);
 310
 311         if (r == -EREMOTEIO) {  /* Retry, chip was in standby */
 312                 usleep_range(6000, 10000);
 313                 r = i2c_master_send(client, skb->data, skb->len);
 314         }
 315
 316         if (r >= 0) {
 317                 if (r != skb->len)
 318                         r = -EREMOTEIO;
 319                 else
 320                         r = 0;
 321         }
 322
 323         pn544_hci_i2c_remove_len_crc(skb);
 324
 325         return r;
 326 }
 327
 328 static int check_crc(u8 *buf, int buflen)
 329 {
 330         int len;
 331         u16 crc;
 332
 333         len = buf[0] + 1;
 334         crc = crc_ccitt(0xffff, buf, len - 2);
 335         crc = ~crc;
 336
 337         if (buf[len - 2] != (crc & 0xff) || buf[len - 1] != (crc >> 8)) {
 338                 pr_err("CRC error 0x%x != 0x%x 0x%x\n",
 339                        crc, buf[len - 1], buf[len - 2]);
 340                 pr_info("%s: BAD CRC\n", __func__);
 341                 print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE,
 342                                16, 2, buf, buflen, false);
 343                 return -EPERM;
 344         }
 345         return 0;
 346 }
 347
 348 /*
 349  * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees
 350  * that i2c bus will be flushed and that next read will start on a new frame.
 351  * returned skb contains only LLC header and payload.
 352  * returns:
 353  * -EREMOTEIO : i2c read error (fatal)
 354  * -EBADMSG : frame was incorrect and discarded
 355  * -ENOMEM : cannot allocate skb, frame dropped
 356  */
 357 static int pn544_hci_i2c_read(struct pn544_i2c_phy *phy, struct sk_buff **skb)
 358 {
 359         int r;
 360         u8 len;
 361         u8 tmp[PN544_HCI_I2C_LLC_MAX_SIZE - 1];
 362         struct i2c_client *client = phy->i2c_dev;
 363
 364         r = i2c_master_recv(client, &len, 1);
 365         if (r != 1) {
 366                 nfc_err(&client->dev, "cannot read len byte\n");
 367                 return -EREMOTEIO;
 368         }
 369
 370         if ((len < (PN544_HCI_I2C_LLC_MIN_SIZE - 1)) ||
 371             (len > (PN544_HCI_I2C_LLC_MAX_SIZE - 1))) {
 372                 nfc_err(&client->dev, "invalid len byte\n");
 373                 r = -EBADMSG;
 374                 goto flush;
 375         }
 376
 377         *skb = alloc_skb(1 + len, GFP_KERNEL);
 378         if (*skb == NULL) {
 379                 r = -ENOMEM;
 380                 goto flush;
 381         }
 382
 383         skb_put_u8(*skb, len);
 384
 385         r = i2c_master_recv(client, skb_put(*skb, len), len);
 386         if (r != len) {
 387                 kfree_skb(*skb);
 388                 return -EREMOTEIO;
 389         }
 390
 391         I2C_DUMP_SKB("i2c frame read", *skb);
 392
 393         r = check_crc((*skb)->data, (*skb)->len);
 394         if (r != 0) {
 395                 kfree_skb(*skb);
 396                 r = -EBADMSG;
 397                 goto flush;
 398         }
 399
 400         skb_pull(*skb, 1);
 401         skb_trim(*skb, (*skb)->len - 2);
 402
 403         usleep_range(3000, 6000);
 404
 405         return 0;
 406
 407 flush:
 408         if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
 409                 r = -EREMOTEIO;
 410
 411         usleep_range(3000, 6000);
 412
 413         return r;
 414 }
 415
 416 static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy)
 417 {
 418         int r;
 419         struct pn544_i2c_fw_frame_response response;
 420         struct i2c_client *client = phy->i2c_dev;
 421
 422         r = i2c_master_recv(client, (char *) &response, sizeof(response));
 423         if (r != sizeof(response)) {
 424                 nfc_err(&client->dev, "cannot read fw status\n");
 425                 return -EIO;
 426         }
 427
 428         usleep_range(3000, 6000);
 429
 430         switch (response.status) {
 431         case 0:
 432                 return 0;
 433         case PN544_FW_CMD_RESULT_CHUNK_OK:
 434                 return response.status;
 435         case PN544_FW_CMD_RESULT_TIMEOUT:
 436                 return -ETIMEDOUT;
 437         case PN544_FW_CMD_RESULT_BAD_CRC:
 438                 return -ENODATA;
 439         case PN544_FW_CMD_RESULT_ACCESS_DENIED:
 440                 return -EACCES;
 441         case PN544_FW_CMD_RESULT_PROTOCOL_ERROR:
 442                 return -EPROTO;
 443         case PN544_FW_CMD_RESULT_INVALID_PARAMETER:
 444                 return -EINVAL;
 445         case PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND:
 446                 return -ENOTSUPP;
 447         case PN544_FW_CMD_RESULT_INVALID_LENGTH:
 448                 return -EBADMSG;
 449         case PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR:
 450                 return -ENOKEY;
 451         case PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR:
 452                 return -EINVAL;
 453         case PN544_FW_CMD_RESULT_MEMORY_ERROR:
 454                 return -ENOMEM;
 455         case PN544_FW_CMD_RESULT_COMMAND_REJECTED:
 456                 return -EACCES;
 457         case PN544_FW_CMD_RESULT_WRITE_FAILED:
 458         case PN544_FW_CMD_RESULT_CHUNK_ERROR:
 459                 return -EIO;
 460         default:
 461                 return -EIO;
 462         }
 463 }
 464
 465 /*
 466  * Reads an shdlc frame from the chip. This is not as straightforward as it
 467  * seems. There are cases where we could loose the frame start synchronization.
 468  * The frame format is len-data-crc, and corruption can occur anywhere while
 469  * transiting on i2c bus, such that we could read an invalid len.
 470  * In order to recover synchronization with the next frame, we must be sure
 471  * to read the real amount of data without using the len byte. We do this by
 472  * assuming the following:
 473  * - the chip will always present only one single complete frame on the bus
 474  *   before triggering the interrupt
 475  * - the chip will not present a new frame until we have completely read
 476  *   the previous one (or until we have handled the interrupt).
 477  * The tricky case is when we read a corrupted len that is less than the real
 478  * len. We must detect this here in order to determine that we need to flush
 479  * the bus. This is the reason why we check the crc here.
 480  */
 481 static irqreturn_t pn544_hci_i2c_irq_thread_fn(int irq, void *phy_id)
 482 {
 483         struct pn544_i2c_phy *phy = phy_id;
 484         struct i2c_client *client;
 485         struct sk_buff *skb = NULL;
 486         int r;
 487
 488         if (!phy || irq != phy->i2c_dev->irq) {
 489                 WARN_ON_ONCE(1);
 490                 return IRQ_NONE;
 491         }
 492
 493         client = phy->i2c_dev;
 494         dev_dbg(&client->dev, "IRQ\n");
 495
 496         if (phy->hard_fault != 0)
 497                 return IRQ_HANDLED;
 498
 499         if (phy->run_mode == PN544_FW_MODE) {
 500                 phy->fw_cmd_result = pn544_hci_i2c_fw_read_status(phy);
 501                 schedule_work(&phy->fw_work);
 502         } else {
 503                 r = pn544_hci_i2c_read(phy, &skb);
 504                 if (r == -EREMOTEIO) {
 505                         phy->hard_fault = r;
 506
 507                         nfc_hci_recv_frame(phy->hdev, NULL);
 508
 509                         return IRQ_HANDLED;
 510                 } else if ((r == -ENOMEM) || (r == -EBADMSG)) {
 511                         return IRQ_HANDLED;
 512                 }
 513
 514                 nfc_hci_recv_frame(phy->hdev, skb);
 515         }
 516         return IRQ_HANDLED;
 517 }
 518
 519 static struct nfc_phy_ops i2c_phy_ops = {
 520         .write = pn544_hci_i2c_write,
 521         .enable = pn544_hci_i2c_enable,
 522         .disable = pn544_hci_i2c_disable,
 523 };
 524
 525 static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name,
 526                                         u8 hw_variant)
 527 {
 528         struct pn544_i2c_phy *phy = phy_id;
 529
 530         pr_info("Starting Firmware Download (%s)\n", firmware_name);
 531
 532         strcpy(phy->firmware_name, firmware_name);
 533
 534         phy->hw_variant = hw_variant;
 535         phy->fw_work_state = FW_WORK_STATE_START;
 536
 537         schedule_work(&phy->fw_work);
 538
 539         return 0;
 540 }
 541
 542 static void pn544_hci_i2c_fw_work_complete(struct pn544_i2c_phy *phy,
 543                                            int result)
 544 {
 545         pr_info("Firmware Download Complete, result=%d\n", result);
 546
 547         pn544_hci_i2c_disable(phy);
 548
 549         phy->fw_work_state = FW_WORK_STATE_IDLE;
 550
 551         if (phy->fw) {
 552                 release_firmware(phy->fw);
 553                 phy->fw = NULL;
 554         }
 555
 556         nfc_fw_download_done(phy->hdev->ndev, phy->firmware_name, (u32) -result);
 557 }
 558
 559 static int pn544_hci_i2c_fw_write_cmd(struct i2c_client *client, u32 dest_addr,
 560                                       const u8 *data, u16 datalen)
 561 {
 562         u8 frame[PN544_FW_I2C_MAX_PAYLOAD];
 563         struct pn544_i2c_fw_frame_write *framep;
 564         u16 params_len;
 565         int framelen;
 566         int r;
 567
 568         if (datalen > PN544_FW_I2C_WRITE_DATA_MAX_LEN)
 569                 datalen = PN544_FW_I2C_WRITE_DATA_MAX_LEN;
 570
 571         framep = (struct pn544_i2c_fw_frame_write *) frame;
 572
 573         params_len = sizeof(framep->be_dest_addr) +
 574                      sizeof(framep->be_datalen) + datalen;
 575         framelen = params_len + sizeof(framep->cmd) +
 576                              sizeof(framep->be_length);
 577
 578         framep->cmd = PN544_FW_CMD_WRITE;
 579
 580         put_unaligned_be16(params_len, &framep->be_length);
 581
 582         framep->be_dest_addr[0] = (dest_addr & 0xff0000) >> 16;
 583         framep->be_dest_addr[1] = (dest_addr & 0xff00) >> 8;
 584         framep->be_dest_addr[2] = dest_addr & 0xff;
 585
 586         put_unaligned_be16(datalen, &framep->be_datalen);
 587
 588         memcpy(framep->data, data, datalen);
 589
 590         r = i2c_master_send(client, frame, framelen);
 591
 592         if (r == framelen)
 593                 return datalen;
 594         else if (r < 0)
 595                 return r;
 596         else
 597                 return -EIO;
 598 }
 599
 600 static int pn544_hci_i2c_fw_check_cmd(struct i2c_client *client, u32 start_addr,
 601                                       const u8 *data, u16 datalen)
 602 {
 603         struct pn544_i2c_fw_frame_check frame;
 604         int r;
 605         u16 crc;
 606
 607         /* calculate local crc for the data we want to check */
 608         crc = crc_ccitt(0xffff, data, datalen);
 609
 610         frame.cmd = PN544_FW_CMD_CHECK;
 611
 612         put_unaligned_be16(sizeof(frame.be_start_addr) +
 613                            sizeof(frame.be_datalen) + sizeof(frame.be_crc),
 614                            &frame.be_length);
 615
 616         /* tell the chip the memory region to which our crc applies */
 617         frame.be_start_addr[0] = (start_addr & 0xff0000) >> 16;
 618         frame.be_start_addr[1] = (start_addr & 0xff00) >> 8;
 619         frame.be_start_addr[2] = start_addr & 0xff;
 620
 621         put_unaligned_be16(datalen, &frame.be_datalen);
 622
 623         /*
 624          * and give our local crc. Chip will calculate its own crc for the
 625          * region and compare with ours.
 626          */
 627         put_unaligned_be16(crc, &frame.be_crc);
 628
 629         r = i2c_master_send(client, (const char *) &frame, sizeof(frame));
 630
 631         if (r == sizeof(frame))
 632                 return 0;
 633         else if (r < 0)
 634                 return r;
 635         else
 636                 return -EIO;
 637 }
 638
 639 static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy)
 640 {
 641         int r;
 642
 643         r = pn544_hci_i2c_fw_write_cmd(phy->i2c_dev,
 644                                        phy->fw_blob_dest_addr + phy->fw_written,
 645                                        phy->fw_blob_data + phy->fw_written,
 646                                        phy->fw_blob_size - phy->fw_written);
 647         if (r < 0)
 648                 return r;
 649
 650         phy->fw_written += r;
 651         phy->fw_work_state = FW_WORK_STATE_WAIT_WRITE_ANSWER;
 652
 653         return 0;
 654 }
 655
 656 static int pn544_hci_i2c_fw_secure_write_frame_cmd(struct pn544_i2c_phy *phy,
 657                                         const u8 *data, u16 datalen)
 658 {
 659         u8 buf[PN544_FW_I2C_MAX_PAYLOAD];
 660         struct pn544_i2c_fw_secure_frame *chunk;
 661         int chunklen;
 662         int r;
 663
 664         if (datalen > PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN)
 665                 datalen = PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN;
 666
 667         chunk = (struct pn544_i2c_fw_secure_frame *) buf;
 668
 669         chunk->cmd = PN544_FW_CMD_SECURE_CHUNK_WRITE;
 670
 671         put_unaligned_be16(datalen, &chunk->be_datalen);
 672
 673         memcpy(chunk->data, data, datalen);
 674
 675         chunklen = sizeof(chunk->cmd) + sizeof(chunk->be_datalen) + datalen;
 676
 677         r = i2c_master_send(phy->i2c_dev, buf, chunklen);
 678
 679         if (r == chunklen)
 680                 return datalen;
 681         else if (r < 0)
 682                 return r;
 683         else
 684                 return -EIO;
 685
 686 }
 687
 688 static int pn544_hci_i2c_fw_secure_write_frame(struct pn544_i2c_phy *phy)
 689 {
 690         struct pn544_i2c_fw_secure_frame *framep;
 691         int r;
 692
 693         framep = (struct pn544_i2c_fw_secure_frame *) phy->fw_blob_data;
 694         if (phy->fw_written == 0)
 695                 phy->fw_blob_size = get_unaligned_be16(&framep->be_datalen)
 696                                 + PN544_FW_SECURE_FRAME_HEADER_LEN;
 697
 698         /* Only secure write command can be chunked*/
 699         if (phy->fw_blob_size > PN544_FW_I2C_MAX_PAYLOAD &&
 700                         framep->cmd != PN544_FW_CMD_SECURE_WRITE)
 701                 return -EINVAL;
 702
 703         /* The firmware also have other commands, we just send them directly */
 704         if (phy->fw_blob_size < PN544_FW_I2C_MAX_PAYLOAD) {
 705                 r = i2c_master_send(phy->i2c_dev,
 706                         (const char *) phy->fw_blob_data, phy->fw_blob_size);
 707
 708                 if (r == phy->fw_blob_size)
 709                         goto exit;
 710                 else if (r < 0)
 711                         return r;
 712                 else
 713                         return -EIO;
 714         }
 715
 716         r = pn544_hci_i2c_fw_secure_write_frame_cmd(phy,
 717                                        phy->fw_blob_data + phy->fw_written,
 718                                        phy->fw_blob_size - phy->fw_written);
 719         if (r < 0)
 720                 return r;
 721
 722 exit:
 723         phy->fw_written += r;
 724         phy->fw_work_state = FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER;
 725
 726         /* SW reset command will not trig any response from PN544 */
 727         if (framep->cmd == PN544_FW_CMD_RESET) {
 728                 pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
 729                 phy->fw_cmd_result = 0;
 730                 schedule_work(&phy->fw_work);
 731         }
 732
 733         return 0;
 734 }
 735
 736 static void pn544_hci_i2c_fw_work(struct work_struct *work)
 737 {
 738         struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy,
 739                                                 fw_work);
 740         int r;
 741         struct pn544_i2c_fw_blob *blob;
 742         struct pn544_i2c_fw_secure_blob *secure_blob;
 743
 744         switch (phy->fw_work_state) {
 745         case FW_WORK_STATE_START:
 746                 pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
 747
 748                 r = reject_firmware(&phy->fw, phy->firmware_name,
 749                                      &phy->i2c_dev->dev);
 750                 if (r < 0)
 751                         goto exit_state_start;
 752
 753                 phy->fw_written = 0;
 754
 755                 switch (phy->hw_variant) {
 756                 case PN544_HW_VARIANT_C2:
 757                         blob = (struct pn544_i2c_fw_blob *) phy->fw->data;
 758                         phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
 759                         phy->fw_blob_dest_addr = get_unaligned_be32(
 760                                                         &blob->be_destaddr);
 761                         phy->fw_blob_data = blob->data;
 762
 763                         r = pn544_hci_i2c_fw_write_chunk(phy);
 764                         break;
 765                 case PN544_HW_VARIANT_C3:
 766                         secure_blob = (struct pn544_i2c_fw_secure_blob *)
 767                                                                 phy->fw->data;
 768                         phy->fw_blob_data = secure_blob->data;
 769                         phy->fw_size = phy->fw->size;
 770                         r = pn544_hci_i2c_fw_secure_write_frame(phy);
 771                         break;
 772                 default:
 773                         r = -ENOTSUPP;
 774                         break;
 775                 }
 776
 777 exit_state_start:
 778                 if (r < 0)
 779                         pn544_hci_i2c_fw_work_complete(phy, r);
 780                 break;
 781
 782         case FW_WORK_STATE_WAIT_WRITE_ANSWER:
 783                 r = phy->fw_cmd_result;
 784                 if (r < 0)
 785                         goto exit_state_wait_write_answer;
 786
 787                 if (phy->fw_written == phy->fw_blob_size) {
 788                         r = pn544_hci_i2c_fw_check_cmd(phy->i2c_dev,
 789                                                        phy->fw_blob_dest_addr,
 790                                                        phy->fw_blob_data,
 791                                                        phy->fw_blob_size);
 792                         if (r < 0)
 793                                 goto exit_state_wait_write_answer;
 794                         phy->fw_work_state = FW_WORK_STATE_WAIT_CHECK_ANSWER;
 795                         break;
 796                 }
 797
 798                 r = pn544_hci_i2c_fw_write_chunk(phy);
 799
 800 exit_state_wait_write_answer:
 801                 if (r < 0)
 802                         pn544_hci_i2c_fw_work_complete(phy, r);
 803                 break;
 804
 805         case FW_WORK_STATE_WAIT_CHECK_ANSWER:
 806                 r = phy->fw_cmd_result;
 807                 if (r < 0)
 808                         goto exit_state_wait_check_answer;
 809
 810                 blob = (struct pn544_i2c_fw_blob *) (phy->fw_blob_data +
 811                        phy->fw_blob_size);
 812                 phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
 813                 if (phy->fw_blob_size != 0) {
 814                         phy->fw_blob_dest_addr =
 815                                         get_unaligned_be32(&blob->be_destaddr);
 816                         phy->fw_blob_data = blob->data;
 817
 818                         phy->fw_written = 0;
 819                         r = pn544_hci_i2c_fw_write_chunk(phy);
 820                 }
 821
 822 exit_state_wait_check_answer:
 823                 if (r < 0 || phy->fw_blob_size == 0)
 824                         pn544_hci_i2c_fw_work_complete(phy, r);
 825                 break;
 826
 827         case FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER:
 828                 r = phy->fw_cmd_result;
 829                 if (r < 0)
 830                         goto exit_state_wait_secure_write_answer;
 831
 832                 if (r == PN544_FW_CMD_RESULT_CHUNK_OK) {
 833                         r = pn544_hci_i2c_fw_secure_write_frame(phy);
 834                         goto exit_state_wait_secure_write_answer;
 835                 }
 836
 837                 if (phy->fw_written == phy->fw_blob_size) {
 838                         secure_blob = (struct pn544_i2c_fw_secure_blob *)
 839                                 (phy->fw_blob_data + phy->fw_blob_size);
 840                         phy->fw_size -= phy->fw_blob_size +
 841                                 PN544_FW_SECURE_BLOB_HEADER_LEN;
 842                         if (phy->fw_size >= PN544_FW_SECURE_BLOB_HEADER_LEN
 843                                         + PN544_FW_SECURE_FRAME_HEADER_LEN) {
 844                                 phy->fw_blob_data = secure_blob->data;
 845
 846                                 phy->fw_written = 0;
 847                                 r = pn544_hci_i2c_fw_secure_write_frame(phy);
 848                         }
 849                 }
 850
 851 exit_state_wait_secure_write_answer:
 852                 if (r < 0 || phy->fw_size == 0)
 853                         pn544_hci_i2c_fw_work_complete(phy, r);
 854                 break;
 855
 856         default:
 857                 break;
 858         }
 859 }
 860
 861 static const struct acpi_gpio_params enable_gpios = { 1, 0, false };
 862 static const struct acpi_gpio_params firmware_gpios = { 2, 0, false };
 863
 864 static const struct acpi_gpio_mapping acpi_pn544_gpios[] = {
 865         { "enable-gpios", &enable_gpios, 1 },
 866         { "firmware-gpios", &firmware_gpios, 1 },
 867         { },
 868 };
 869
 870 static int pn544_hci_i2c_probe(struct i2c_client *client,
 871                                const struct i2c_device_id *id)
 872 {
 873         struct device *dev = &client->dev;
 874         struct pn544_i2c_phy *phy;
 875         int r = 0;
 876
 877         dev_dbg(&client->dev, "%s\n", __func__);
 878         dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
 879
 880         if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 881                 nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
 882                 return -ENODEV;
 883         }
 884
 885         phy = devm_kzalloc(&client->dev, sizeof(struct pn544_i2c_phy),
 886                            GFP_KERNEL);
 887         if (!phy)
 888                 return -ENOMEM;
 889
 890         INIT_WORK(&phy->fw_work, pn544_hci_i2c_fw_work);
 891         phy->fw_work_state = FW_WORK_STATE_IDLE;
 892
 893         phy->i2c_dev = client;
 894         i2c_set_clientdata(client, phy);
 895
 896         r = devm_acpi_dev_add_driver_gpios(dev, acpi_pn544_gpios);
 897         if (r)
 898                 dev_dbg(dev, "Unable to add GPIO mapping table\n");
 899
 900         /* Get EN GPIO */
 901         phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
 902         if (IS_ERR(phy->gpiod_en)) {
 903                 nfc_err(dev, "Unable to get EN GPIO\n");
 904                 return PTR_ERR(phy->gpiod_en);
 905         }
 906
 907         /* Get FW GPIO */
 908         phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW);
 909         if (IS_ERR(phy->gpiod_fw)) {
 910                 nfc_err(dev, "Unable to get FW GPIO\n");
 911                 return PTR_ERR(phy->gpiod_fw);
 912         }
 913
 914         pn544_hci_i2c_platform_init(phy);
 915
 916         r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
 917                                       pn544_hci_i2c_irq_thread_fn,
 918                                       IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 919                                       PN544_HCI_I2C_DRIVER_NAME, phy);
 920         if (r < 0) {
 921                 nfc_err(&client->dev, "Unable to register IRQ handler\n");
 922                 return r;
 923         }
 924
 925         r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
 926                             PN544_I2C_FRAME_HEADROOM, PN544_I2C_FRAME_TAILROOM,
 927                             PN544_HCI_I2C_LLC_MAX_PAYLOAD,
 928                             pn544_hci_i2c_fw_download, &phy->hdev);
 929         if (r < 0)
 930                 return r;
 931
 932         return 0;
 933 }
 934
 935 static int pn544_hci_i2c_remove(struct i2c_client *client)
 936 {
 937         struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
 938
 939         dev_dbg(&client->dev, "%s\n", __func__);
 940
 941         cancel_work_sync(&phy->fw_work);
 942         if (phy->fw_work_state != FW_WORK_STATE_IDLE)
 943                 pn544_hci_i2c_fw_work_complete(phy, -ENODEV);
 944
 945         pn544_hci_remove(phy->hdev);
 946
 947         if (phy->powered)
 948                 pn544_hci_i2c_disable(phy);
 949
 950         return 0;
 951 }
 952
 953 static const struct of_device_id of_pn544_i2c_match[] = {
 954         { .compatible = "nxp,pn544-i2c", },
 955         {},
 956 };
 957 MODULE_DEVICE_TABLE(of, of_pn544_i2c_match);
 958
 959 static struct i2c_driver pn544_hci_i2c_driver = {
 960         .driver = {
 961                    .name = PN544_HCI_I2C_DRIVER_NAME,
 962                    .of_match_table = of_match_ptr(of_pn544_i2c_match),
 963                    .acpi_match_table = ACPI_PTR(pn544_hci_i2c_acpi_match),
 964                   },
 965         .probe = pn544_hci_i2c_probe,
 966         .id_table = pn544_hci_i2c_id_table,
 967         .remove = pn544_hci_i2c_remove,
 968 };
 969
 970 module_i2c_driver(pn544_hci_i2c_driver);
 971
 972 MODULE_LICENSE("GPL");
 973 MODULE_DESCRIPTION(DRIVER_DESC);