Merge git://git.denx.de/u-boot-spi
[oweals/u-boot.git] / drivers / net / sh_eth.c
1 /*
2  * sh_eth.c - Driver for Renesas ethernet controller.
3  *
4  * Copyright (C) 2008, 2011 Renesas Solutions Corp.
5  * Copyright (c) 2008, 2011, 2014 2014 Nobuhiro Iwamatsu
6  * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
7  * Copyright (C) 2013, 2014 Renesas Electronics Corporation
8  *
9  * SPDX-License-Identifier:     GPL-2.0+
10  */
11
12 #include <config.h>
13 #include <common.h>
14 #include <malloc.h>
15 #include <net.h>
16 #include <netdev.h>
17 #include <miiphy.h>
18 #include <linux/errno.h>
19 #include <asm/io.h>
20
21 #include "sh_eth.h"
22
23 #ifndef CONFIG_SH_ETHER_USE_PORT
24 # error "Please define CONFIG_SH_ETHER_USE_PORT"
25 #endif
26 #ifndef CONFIG_SH_ETHER_PHY_ADDR
27 # error "Please define CONFIG_SH_ETHER_PHY_ADDR"
28 #endif
29
30 #if defined(CONFIG_SH_ETHER_CACHE_WRITEBACK) && !defined(CONFIG_SYS_DCACHE_OFF)
31 #define flush_cache_wback(addr, len)    \
32                 flush_dcache_range((u32)addr, \
33                 (u32)(addr + ALIGN(len, CONFIG_SH_ETHER_ALIGNE_SIZE)))
34 #else
35 #define flush_cache_wback(...)
36 #endif
37
38 #if defined(CONFIG_SH_ETHER_CACHE_INVALIDATE) && defined(CONFIG_ARM)
39 #define invalidate_cache(addr, len)             \
40         {       \
41                 u32 line_size = CONFIG_SH_ETHER_ALIGNE_SIZE;    \
42                 u32 start, end; \
43                 \
44                 start = (u32)addr;      \
45                 end = start + len;      \
46                 start &= ~(line_size - 1);      \
47                 end = ((end + line_size - 1) & ~(line_size - 1));       \
48                 \
49                 invalidate_dcache_range(start, end);    \
50         }
51 #else
52 #define invalidate_cache(...)
53 #endif
54
55 #define TIMEOUT_CNT 1000
56
57 int sh_eth_send(struct eth_device *dev, void *packet, int len)
58 {
59         struct sh_eth_dev *eth = dev->priv;
60         int port = eth->port, ret = 0, timeout;
61         struct sh_eth_info *port_info = &eth->port_info[port];
62
63         if (!packet || len > 0xffff) {
64                 printf(SHETHER_NAME ": %s: Invalid argument\n", __func__);
65                 ret = -EINVAL;
66                 goto err;
67         }
68
69         /* packet must be a 4 byte boundary */
70         if ((int)packet & 3) {
71                 printf(SHETHER_NAME ": %s: packet not 4 byte aligned\n"
72                                 , __func__);
73                 ret = -EFAULT;
74                 goto err;
75         }
76
77         /* Update tx descriptor */
78         flush_cache_wback(packet, len);
79         port_info->tx_desc_cur->td2 = ADDR_TO_PHY(packet);
80         port_info->tx_desc_cur->td1 = len << 16;
81         /* Must preserve the end of descriptor list indication */
82         if (port_info->tx_desc_cur->td0 & TD_TDLE)
83                 port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP | TD_TDLE;
84         else
85                 port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP;
86
87         flush_cache_wback(port_info->tx_desc_cur, sizeof(struct tx_desc_s));
88
89         /* Restart the transmitter if disabled */
90         if (!(sh_eth_read(port_info, EDTRR) & EDTRR_TRNS))
91                 sh_eth_write(port_info, EDTRR_TRNS, EDTRR);
92
93         /* Wait until packet is transmitted */
94         timeout = TIMEOUT_CNT;
95         do {
96                 invalidate_cache(port_info->tx_desc_cur,
97                                  sizeof(struct tx_desc_s));
98                 udelay(100);
99         } while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--);
100
101         if (timeout < 0) {
102                 printf(SHETHER_NAME ": transmit timeout\n");
103                 ret = -ETIMEDOUT;
104                 goto err;
105         }
106
107         port_info->tx_desc_cur++;
108         if (port_info->tx_desc_cur >= port_info->tx_desc_base + NUM_TX_DESC)
109                 port_info->tx_desc_cur = port_info->tx_desc_base;
110
111 err:
112         return ret;
113 }
114
115 int sh_eth_recv(struct eth_device *dev)
116 {
117         struct sh_eth_dev *eth = dev->priv;
118         int port = eth->port, len = 0;
119         struct sh_eth_info *port_info = &eth->port_info[port];
120         uchar *packet;
121
122         /* Check if the rx descriptor is ready */
123         invalidate_cache(port_info->rx_desc_cur, sizeof(struct rx_desc_s));
124         if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) {
125                 /* Check for errors */
126                 if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) {
127                         len = port_info->rx_desc_cur->rd1 & 0xffff;
128                         packet = (uchar *)
129                                 ADDR_TO_P2(port_info->rx_desc_cur->rd2);
130                         invalidate_cache(packet, len);
131                         net_process_received_packet(packet, len);
132                 }
133
134                 /* Make current descriptor available again */
135                 if (port_info->rx_desc_cur->rd0 & RD_RDLE)
136                         port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE;
137                 else
138                         port_info->rx_desc_cur->rd0 = RD_RACT;
139
140                 flush_cache_wback(port_info->rx_desc_cur,
141                                   sizeof(struct rx_desc_s));
142
143                 /* Point to the next descriptor */
144                 port_info->rx_desc_cur++;
145                 if (port_info->rx_desc_cur >=
146                     port_info->rx_desc_base + NUM_RX_DESC)
147                         port_info->rx_desc_cur = port_info->rx_desc_base;
148         }
149
150         /* Restart the receiver if disabled */
151         if (!(sh_eth_read(port_info, EDRRR) & EDRRR_R))
152                 sh_eth_write(port_info, EDRRR_R, EDRRR);
153
154         return len;
155 }
156
157 static int sh_eth_reset(struct sh_eth_dev *eth)
158 {
159         struct sh_eth_info *port_info = &eth->port_info[eth->port];
160 #if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
161         int ret = 0, i;
162
163         /* Start e-dmac transmitter and receiver */
164         sh_eth_write(port_info, EDSR_ENALL, EDSR);
165
166         /* Perform a software reset and wait for it to complete */
167         sh_eth_write(port_info, EDMR_SRST, EDMR);
168         for (i = 0; i < TIMEOUT_CNT; i++) {
169                 if (!(sh_eth_read(port_info, EDMR) & EDMR_SRST))
170                         break;
171                 udelay(1000);
172         }
173
174         if (i == TIMEOUT_CNT) {
175                 printf(SHETHER_NAME  ": Software reset timeout\n");
176                 ret = -EIO;
177         }
178
179         return ret;
180 #else
181         sh_eth_write(port_info, sh_eth_read(port_info, EDMR) | EDMR_SRST, EDMR);
182         udelay(3000);
183         sh_eth_write(port_info,
184                      sh_eth_read(port_info, EDMR) & ~EDMR_SRST, EDMR);
185
186         return 0;
187 #endif
188 }
189
190 static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
191 {
192         int port = eth->port, i, ret = 0;
193         u32 alloc_desc_size = NUM_TX_DESC * sizeof(struct tx_desc_s);
194         struct sh_eth_info *port_info = &eth->port_info[port];
195         struct tx_desc_s *cur_tx_desc;
196
197         /*
198          * Allocate rx descriptors. They must be aligned to size of struct
199          * tx_desc_s.
200          */
201         port_info->tx_desc_alloc =
202                 memalign(sizeof(struct tx_desc_s), alloc_desc_size);
203         if (!port_info->tx_desc_alloc) {
204                 printf(SHETHER_NAME ": memalign failed\n");
205                 ret = -ENOMEM;
206                 goto err;
207         }
208
209         flush_cache_wback(port_info->tx_desc_alloc, alloc_desc_size);
210
211         /* Make sure we use a P2 address (non-cacheable) */
212         port_info->tx_desc_base =
213                 (struct tx_desc_s *)ADDR_TO_P2((u32)port_info->tx_desc_alloc);
214         port_info->tx_desc_cur = port_info->tx_desc_base;
215
216         /* Initialize all descriptors */
217         for (cur_tx_desc = port_info->tx_desc_base, i = 0; i < NUM_TX_DESC;
218              cur_tx_desc++, i++) {
219                 cur_tx_desc->td0 = 0x00;
220                 cur_tx_desc->td1 = 0x00;
221                 cur_tx_desc->td2 = 0x00;
222         }
223
224         /* Mark the end of the descriptors */
225         cur_tx_desc--;
226         cur_tx_desc->td0 |= TD_TDLE;
227
228         /*
229          * Point the controller to the tx descriptor list. Must use physical
230          * addresses
231          */
232         sh_eth_write(port_info, ADDR_TO_PHY(port_info->tx_desc_base), TDLAR);
233 #if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
234         sh_eth_write(port_info, ADDR_TO_PHY(port_info->tx_desc_base), TDFAR);
235         sh_eth_write(port_info, ADDR_TO_PHY(cur_tx_desc), TDFXR);
236         sh_eth_write(port_info, 0x01, TDFFR);/* Last discriptor bit */
237 #endif
238
239 err:
240         return ret;
241 }
242
243 static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
244 {
245         int port = eth->port, i, ret = 0;
246         u32 alloc_desc_size = NUM_RX_DESC * sizeof(struct rx_desc_s);
247         struct sh_eth_info *port_info = &eth->port_info[port];
248         struct rx_desc_s *cur_rx_desc;
249         u8 *rx_buf;
250
251         /*
252          * Allocate rx descriptors. They must be aligned to size of struct
253          * rx_desc_s.
254          */
255         port_info->rx_desc_alloc =
256                 memalign(sizeof(struct rx_desc_s), alloc_desc_size);
257         if (!port_info->rx_desc_alloc) {
258                 printf(SHETHER_NAME ": memalign failed\n");
259                 ret = -ENOMEM;
260                 goto err;
261         }
262
263         flush_cache_wback(port_info->rx_desc_alloc, alloc_desc_size);
264
265         /* Make sure we use a P2 address (non-cacheable) */
266         port_info->rx_desc_base =
267                 (struct rx_desc_s *)ADDR_TO_P2((u32)port_info->rx_desc_alloc);
268
269         port_info->rx_desc_cur = port_info->rx_desc_base;
270
271         /*
272          * Allocate rx data buffers. They must be RX_BUF_ALIGNE_SIZE bytes
273          * aligned and in P2 area.
274          */
275         port_info->rx_buf_alloc =
276                 memalign(RX_BUF_ALIGNE_SIZE, NUM_RX_DESC * MAX_BUF_SIZE);
277         if (!port_info->rx_buf_alloc) {
278                 printf(SHETHER_NAME ": alloc failed\n");
279                 ret = -ENOMEM;
280                 goto err_buf_alloc;
281         }
282
283         port_info->rx_buf_base = (u8 *)ADDR_TO_P2((u32)port_info->rx_buf_alloc);
284
285         /* Initialize all descriptors */
286         for (cur_rx_desc = port_info->rx_desc_base,
287              rx_buf = port_info->rx_buf_base, i = 0;
288              i < NUM_RX_DESC; cur_rx_desc++, rx_buf += MAX_BUF_SIZE, i++) {
289                 cur_rx_desc->rd0 = RD_RACT;
290                 cur_rx_desc->rd1 = MAX_BUF_SIZE << 16;
291                 cur_rx_desc->rd2 = (u32)ADDR_TO_PHY(rx_buf);
292         }
293
294         /* Mark the end of the descriptors */
295         cur_rx_desc--;
296         cur_rx_desc->rd0 |= RD_RDLE;
297
298         /* Point the controller to the rx descriptor list */
299         sh_eth_write(port_info, ADDR_TO_PHY(port_info->rx_desc_base), RDLAR);
300 #if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
301         sh_eth_write(port_info, ADDR_TO_PHY(port_info->rx_desc_base), RDFAR);
302         sh_eth_write(port_info, ADDR_TO_PHY(cur_rx_desc), RDFXR);
303         sh_eth_write(port_info, RDFFR_RDLF, RDFFR);
304 #endif
305
306         return ret;
307
308 err_buf_alloc:
309         free(port_info->rx_desc_alloc);
310         port_info->rx_desc_alloc = NULL;
311
312 err:
313         return ret;
314 }
315
316 static void sh_eth_tx_desc_free(struct sh_eth_dev *eth)
317 {
318         int port = eth->port;
319         struct sh_eth_info *port_info = &eth->port_info[port];
320
321         if (port_info->tx_desc_alloc) {
322                 free(port_info->tx_desc_alloc);
323                 port_info->tx_desc_alloc = NULL;
324         }
325 }
326
327 static void sh_eth_rx_desc_free(struct sh_eth_dev *eth)
328 {
329         int port = eth->port;
330         struct sh_eth_info *port_info = &eth->port_info[port];
331
332         if (port_info->rx_desc_alloc) {
333                 free(port_info->rx_desc_alloc);
334                 port_info->rx_desc_alloc = NULL;
335         }
336
337         if (port_info->rx_buf_alloc) {
338                 free(port_info->rx_buf_alloc);
339                 port_info->rx_buf_alloc = NULL;
340         }
341 }
342
343 static int sh_eth_desc_init(struct sh_eth_dev *eth)
344 {
345         int ret = 0;
346
347         ret = sh_eth_tx_desc_init(eth);
348         if (ret)
349                 goto err_tx_init;
350
351         ret = sh_eth_rx_desc_init(eth);
352         if (ret)
353                 goto err_rx_init;
354
355         return ret;
356 err_rx_init:
357         sh_eth_tx_desc_free(eth);
358
359 err_tx_init:
360         return ret;
361 }
362
363 static int sh_eth_phy_config(struct sh_eth_dev *eth)
364 {
365         int port = eth->port, ret = 0;
366         struct sh_eth_info *port_info = &eth->port_info[port];
367         struct eth_device *dev = port_info->dev;
368         struct phy_device *phydev;
369
370         phydev = phy_connect(
371                         miiphy_get_dev_by_name(dev->name),
372                         port_info->phy_addr, dev, CONFIG_SH_ETHER_PHY_MODE);
373         port_info->phydev = phydev;
374         phy_config(phydev);
375
376         return ret;
377 }
378
379 static int sh_eth_config(struct sh_eth_dev *eth)
380 {
381         int port = eth->port, ret = 0;
382         u32 val;
383         struct sh_eth_info *port_info = &eth->port_info[port];
384         struct eth_device *dev = port_info->dev;
385         struct phy_device *phy;
386
387         /* Configure e-dmac registers */
388         sh_eth_write(port_info, (sh_eth_read(port_info, EDMR) & ~EMDR_DESC_R) |
389                         (EMDR_DESC | EDMR_EL), EDMR);
390
391         sh_eth_write(port_info, 0, EESIPR);
392         sh_eth_write(port_info, 0, TRSCER);
393         sh_eth_write(port_info, 0, TFTR);
394         sh_eth_write(port_info, (FIFO_SIZE_T | FIFO_SIZE_R), FDR);
395         sh_eth_write(port_info, RMCR_RST, RMCR);
396 #if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
397         sh_eth_write(port_info, 0, RPADIR);
398 #endif
399         sh_eth_write(port_info, (FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR);
400
401         /* Configure e-mac registers */
402         sh_eth_write(port_info, 0, ECSIPR);
403
404         /* Set Mac address */
405         val = dev->enetaddr[0] << 24 | dev->enetaddr[1] << 16 |
406             dev->enetaddr[2] << 8 | dev->enetaddr[3];
407         sh_eth_write(port_info, val, MAHR);
408
409         val = dev->enetaddr[4] << 8 | dev->enetaddr[5];
410         sh_eth_write(port_info, val, MALR);
411
412         sh_eth_write(port_info, RFLR_RFL_MIN, RFLR);
413 #if defined(SH_ETH_TYPE_GETHER)
414         sh_eth_write(port_info, 0, PIPR);
415 #endif
416 #if defined(SH_ETH_TYPE_GETHER) || defined(SH_ETH_TYPE_RZ)
417         sh_eth_write(port_info, APR_AP, APR);
418         sh_eth_write(port_info, MPR_MP, MPR);
419         sh_eth_write(port_info, TPAUSER_TPAUSE, TPAUSER);
420 #endif
421
422 #if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740)
423         sh_eth_write(port_info, CONFIG_SH_ETHER_SH7734_MII, RMII_MII);
424 #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
425         defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794)
426         sh_eth_write(port_info, sh_eth_read(port_info, RMIIMR) | 0x1, RMIIMR);
427 #endif
428         /* Configure phy */
429         ret = sh_eth_phy_config(eth);
430         if (ret) {
431                 printf(SHETHER_NAME ": phy config timeout\n");
432                 goto err_phy_cfg;
433         }
434         phy = port_info->phydev;
435         ret = phy_startup(phy);
436         if (ret) {
437                 printf(SHETHER_NAME ": phy startup failure\n");
438                 return ret;
439         }
440
441         val = 0;
442
443         /* Set the transfer speed */
444         if (phy->speed == 100) {
445                 printf(SHETHER_NAME ": 100Base/");
446 #if defined(SH_ETH_TYPE_GETHER)
447                 sh_eth_write(port_info, GECMR_100B, GECMR);
448 #elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
449                 sh_eth_write(port_info, 1, RTRATE);
450 #elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \
451                 defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \
452                 defined(CONFIG_R8A7794)
453                 val = ECMR_RTM;
454 #endif
455         } else if (phy->speed == 10) {
456                 printf(SHETHER_NAME ": 10Base/");
457 #if defined(SH_ETH_TYPE_GETHER)
458                 sh_eth_write(port_info, GECMR_10B, GECMR);
459 #elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
460                 sh_eth_write(port_info, 0, RTRATE);
461 #endif
462         }
463 #if defined(SH_ETH_TYPE_GETHER)
464         else if (phy->speed == 1000) {
465                 printf(SHETHER_NAME ": 1000Base/");
466                 sh_eth_write(port_info, GECMR_1000B, GECMR);
467         }
468 #endif
469
470         /* Check if full duplex mode is supported by the phy */
471         if (phy->duplex) {
472                 printf("Full\n");
473                 sh_eth_write(port_info,
474                              val | (ECMR_CHG_DM | ECMR_RE | ECMR_TE | ECMR_DM),
475                              ECMR);
476         } else {
477                 printf("Half\n");
478                 sh_eth_write(port_info,
479                              val | (ECMR_CHG_DM | ECMR_RE | ECMR_TE),
480                              ECMR);
481         }
482
483         return ret;
484
485 err_phy_cfg:
486         return ret;
487 }
488
489 static void sh_eth_start(struct sh_eth_dev *eth)
490 {
491         struct sh_eth_info *port_info = &eth->port_info[eth->port];
492
493         /*
494          * Enable the e-dmac receiver only. The transmitter will be enabled when
495          * we have something to transmit
496          */
497         sh_eth_write(port_info, EDRRR_R, EDRRR);
498 }
499
500 static void sh_eth_stop(struct sh_eth_dev *eth)
501 {
502         struct sh_eth_info *port_info = &eth->port_info[eth->port];
503
504         sh_eth_write(port_info, ~EDRRR_R, EDRRR);
505 }
506
507 int sh_eth_init(struct eth_device *dev, bd_t *bd)
508 {
509         int ret = 0;
510         struct sh_eth_dev *eth = dev->priv;
511
512         ret = sh_eth_reset(eth);
513         if (ret)
514                 goto err;
515
516         ret = sh_eth_desc_init(eth);
517         if (ret)
518                 goto err;
519
520         ret = sh_eth_config(eth);
521         if (ret)
522                 goto err_config;
523
524         sh_eth_start(eth);
525
526         return ret;
527
528 err_config:
529         sh_eth_tx_desc_free(eth);
530         sh_eth_rx_desc_free(eth);
531
532 err:
533         return ret;
534 }
535
536 void sh_eth_halt(struct eth_device *dev)
537 {
538         struct sh_eth_dev *eth = dev->priv;
539
540         sh_eth_stop(eth);
541 }
542
543 int sh_eth_initialize(bd_t *bd)
544 {
545         int ret = 0;
546         struct sh_eth_dev *eth = NULL;
547         struct eth_device *dev = NULL;
548         struct mii_dev *mdiodev;
549
550         eth = (struct sh_eth_dev *)malloc(sizeof(struct sh_eth_dev));
551         if (!eth) {
552                 printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
553                 ret = -ENOMEM;
554                 goto err;
555         }
556
557         dev = (struct eth_device *)malloc(sizeof(struct eth_device));
558         if (!dev) {
559                 printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
560                 ret = -ENOMEM;
561                 goto err;
562         }
563         memset(dev, 0, sizeof(struct eth_device));
564         memset(eth, 0, sizeof(struct sh_eth_dev));
565
566         eth->port = CONFIG_SH_ETHER_USE_PORT;
567         eth->port_info[eth->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
568         eth->port_info[eth->port].iobase =
569                 (void __iomem *)(BASE_IO_ADDR + 0x800 * eth->port);
570
571         dev->priv = (void *)eth;
572         dev->iobase = 0;
573         dev->init = sh_eth_init;
574         dev->halt = sh_eth_halt;
575         dev->send = sh_eth_send;
576         dev->recv = sh_eth_recv;
577         eth->port_info[eth->port].dev = dev;
578
579         strcpy(dev->name, SHETHER_NAME);
580
581         /* Register Device to EtherNet subsystem  */
582         eth_register(dev);
583
584         bb_miiphy_buses[0].priv = eth;
585         mdiodev = mdio_alloc();
586         if (!mdiodev)
587                 return -ENOMEM;
588         strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
589         mdiodev->read = bb_miiphy_read;
590         mdiodev->write = bb_miiphy_write;
591
592         ret = mdio_register(mdiodev);
593         if (ret < 0)
594                 return ret;
595
596         if (!eth_env_get_enetaddr("ethaddr", dev->enetaddr))
597                 puts("Please set MAC address\n");
598
599         return ret;
600
601 err:
602         if (dev)
603                 free(dev);
604
605         if (eth)
606                 free(eth);
607
608         printf(SHETHER_NAME ": Failed\n");
609         return ret;
610 }
611
612 /******* for bb_miiphy *******/
613 static int sh_eth_bb_init(struct bb_miiphy_bus *bus)
614 {
615         return 0;
616 }
617
618 static int sh_eth_bb_mdio_active(struct bb_miiphy_bus *bus)
619 {
620         struct sh_eth_dev *eth = bus->priv;
621         struct sh_eth_info *port_info = &eth->port_info[eth->port];
622
623         sh_eth_write(port_info, sh_eth_read(port_info, PIR) | PIR_MMD, PIR);
624
625         return 0;
626 }
627
628 static int sh_eth_bb_mdio_tristate(struct bb_miiphy_bus *bus)
629 {
630         struct sh_eth_dev *eth = bus->priv;
631         struct sh_eth_info *port_info = &eth->port_info[eth->port];
632
633         sh_eth_write(port_info, sh_eth_read(port_info, PIR) & ~PIR_MMD, PIR);
634
635         return 0;
636 }
637
638 static int sh_eth_bb_set_mdio(struct bb_miiphy_bus *bus, int v)
639 {
640         struct sh_eth_dev *eth = bus->priv;
641         struct sh_eth_info *port_info = &eth->port_info[eth->port];
642
643         if (v)
644                 sh_eth_write(port_info,
645                              sh_eth_read(port_info, PIR) | PIR_MDO, PIR);
646         else
647                 sh_eth_write(port_info,
648                              sh_eth_read(port_info, PIR) & ~PIR_MDO, PIR);
649
650         return 0;
651 }
652
653 static int sh_eth_bb_get_mdio(struct bb_miiphy_bus *bus, int *v)
654 {
655         struct sh_eth_dev *eth = bus->priv;
656         struct sh_eth_info *port_info = &eth->port_info[eth->port];
657
658         *v = (sh_eth_read(port_info, PIR) & PIR_MDI) >> 3;
659
660         return 0;
661 }
662
663 static int sh_eth_bb_set_mdc(struct bb_miiphy_bus *bus, int v)
664 {
665         struct sh_eth_dev *eth = bus->priv;
666         struct sh_eth_info *port_info = &eth->port_info[eth->port];
667
668         if (v)
669                 sh_eth_write(port_info,
670                              sh_eth_read(port_info, PIR) | PIR_MDC, PIR);
671         else
672                 sh_eth_write(port_info,
673                              sh_eth_read(port_info, PIR) & ~PIR_MDC, PIR);
674
675         return 0;
676 }
677
678 static int sh_eth_bb_delay(struct bb_miiphy_bus *bus)
679 {
680         udelay(10);
681
682         return 0;
683 }
684
685 struct bb_miiphy_bus bb_miiphy_buses[] = {
686         {
687                 .name           = "sh_eth",
688                 .init           = sh_eth_bb_init,
689                 .mdio_active    = sh_eth_bb_mdio_active,
690                 .mdio_tristate  = sh_eth_bb_mdio_tristate,
691                 .set_mdio       = sh_eth_bb_set_mdio,
692                 .get_mdio       = sh_eth_bb_get_mdio,
693                 .set_mdc        = sh_eth_bb_set_mdc,
694                 .delay          = sh_eth_bb_delay,
695         }
696 };
697
698 int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);