1 // SPDX-License-Identifier: GPL-2.0+
3 * rtl8169.c : U-Boot driver for the RealTek RTL8169
5 * Masami Komiya (mkomiya@sonare.it)
7 * Most part is taken from r8169.c of etherboot
11 /**************************************************************************
12 * r8169.c: Etherboot device driver for the RealTek RTL-8169 Gigabit
13 * Written 2003 by Timothy Legge <tlegge@rogers.com>
15 * Portions of this code based on:
16 * r8169.c: A RealTek RTL-8169 Gigabit Ethernet driver
17 * for Linux kernel 2.4.x.
19 * Written 2002 ShuChen <shuchen@realtek.com.tw>
20 * See Linux Driver for full information
22 * Linux Driver Version 1.27a, 10.02.2002
25 * Jean Chen of RealTek Semiconductor Corp. for
26 * providing the evaluation NIC used to develop
27 * this driver. RealTek's support for Etherboot
33 * v1.0 11-26-2003 timlegge Initial port of Linux driver
34 * v1.5 01-17-2004 timlegge Initial driver output cleanup
36 * Indent Options: indent -kr -i8
37 ***************************************************************************/
39 * 26 August 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
40 * Modified to use le32_to_cpu and cpu_to_le32 properly
52 #include <asm/cache.h>
57 #undef DEBUG_RTL8169_TX
58 #undef DEBUG_RTL8169_RX
60 #define drv_version "v1.5"
61 #define drv_date "01-17-2004"
63 static unsigned long ioaddr;
65 /* Condensed operations for readability. */
66 #define currticks() get_timer(0)
70 static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 };
72 /* MAC address length*/
73 #define MAC_ADDR_LEN 6
75 /* max supported gigabit ethernet frame size -- must be at least (dev->mtu+14+4).*/
76 #define MAX_ETH_FRAME_SIZE 1536
78 #define TX_FIFO_THRESH 256 /* In bytes */
80 #define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */
81 #define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
82 #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
83 #define EarlyTxThld 0x3F /* 0x3F means NO early transmit */
84 #define RxPacketMaxSize 0x0800 /* Maximum size supported is 16K-1 */
85 #define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */
87 #define NUM_TX_DESC 1 /* Number of Tx descriptor registers */
88 #ifdef CONFIG_SYS_RX_ETH_BUFFER
89 #define NUM_RX_DESC CONFIG_SYS_RX_ETH_BUFFER
91 #define NUM_RX_DESC 4 /* Number of Rx descriptor registers */
93 #define RX_BUF_SIZE 1536 /* Rx Buffer size */
94 #define RX_BUF_LEN 8192
96 #define RTL_MIN_IO_SIZE 0x80
97 #define TX_TIMEOUT (6*HZ)
99 /* write/read MMIO register. Notice: {read,write}[wl] do the necessary swapping */
100 #define RTL_W8(reg, val8) writeb((val8), ioaddr + (reg))
101 #define RTL_W16(reg, val16) writew((val16), ioaddr + (reg))
102 #define RTL_W32(reg, val32) writel((val32), ioaddr + (reg))
103 #define RTL_R8(reg) readb(ioaddr + (reg))
104 #define RTL_R16(reg) readw(ioaddr + (reg))
105 #define RTL_R32(reg) readl(ioaddr + (reg))
107 #define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)(unsigned long)dev->priv, \
108 (pci_addr_t)(unsigned long)a)
109 #define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)(unsigned long)dev->priv, \
112 enum RTL8169_registers {
113 MAC0 = 0, /* Ethernet hardware address. */
114 MAR0 = 8, /* Multicast filter. */
115 TxDescStartAddrLow = 0x20,
116 TxDescStartAddrHigh = 0x24,
117 TxHDescStartAddrLow = 0x28,
118 TxHDescStartAddrHigh = 0x2c,
143 RxDescStartAddrLow = 0xE4,
144 RxDescStartAddrHigh = 0xE8,
147 FuncEventMask = 0xF4,
148 FuncPresetState = 0xF8,
149 FuncForceEvent = 0xFC,
152 enum RTL8169_register_content {
153 /*InterruptStatusBits */
157 TxDescUnavail = 0x80,
180 Cfg9346_Unlock = 0xC0,
185 AcceptBroadcast = 0x08,
186 AcceptMulticast = 0x04,
188 AcceptAllPhys = 0x01,
195 TxInterFrameGapShift = 24,
196 TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
198 /*rtl8169_PHYstatus */
208 /*GIGABIT_PHY_registers */
211 PHY_AUTO_NEGO_REG = 4,
212 PHY_1000_CTRL_REG = 9,
214 /*GIGABIT_PHY_REG_BIT */
215 PHY_Restart_Auto_Nego = 0x0200,
216 PHY_Enable_Auto_Nego = 0x1000,
218 /* PHY_STAT_REG = 1; */
219 PHY_Auto_Nego_Comp = 0x0020,
221 /* PHY_AUTO_NEGO_REG = 4; */
222 PHY_Cap_10_Half = 0x0020,
223 PHY_Cap_10_Full = 0x0040,
224 PHY_Cap_100_Half = 0x0080,
225 PHY_Cap_100_Full = 0x0100,
227 /* PHY_1000_CTRL_REG = 9; */
228 PHY_Cap_1000_Full = 0x0200,
240 TBILinkOK = 0x02000000,
245 u8 version; /* depend on RTL8169 docs */
246 u32 RxConfigMask; /* should clear the bits supported by this chip */
247 } rtl_chip_info[] = {
248 {"RTL-8169", 0x00, 0xff7e1880,},
249 {"RTL-8169", 0x04, 0xff7e1880,},
250 {"RTL-8169", 0x00, 0xff7e1880,},
251 {"RTL-8169s/8110s", 0x02, 0xff7e1880,},
252 {"RTL-8169s/8110s", 0x04, 0xff7e1880,},
253 {"RTL-8169sb/8110sb", 0x10, 0xff7e1880,},
254 {"RTL-8169sc/8110sc", 0x18, 0xff7e1880,},
255 {"RTL-8168b/8111sb", 0x30, 0xff7e1880,},
256 {"RTL-8168b/8111sb", 0x38, 0xff7e1880,},
257 {"RTL-8168c/8111c", 0x3c, 0xff7e1880,},
258 {"RTL-8168d/8111d", 0x28, 0xff7e1880,},
259 {"RTL-8168evl/8111evl", 0x2e, 0xff7e1880,},
260 {"RTL-8168/8111g", 0x4c, 0xff7e1880,},
261 {"RTL-8101e", 0x34, 0xff7e1880,},
262 {"RTL-8100e", 0x32, 0xff7e1880,},
263 {"RTL-8168h/8111h", 0x54, 0xff7e1880,},
266 enum _DescStatusBit {
287 static unsigned char rxdata[RX_BUF_LEN];
289 #define RTL8169_DESC_SIZE 16
291 #if ARCH_DMA_MINALIGN > 256
292 # define RTL8169_ALIGN ARCH_DMA_MINALIGN
294 # define RTL8169_ALIGN 256
298 * Warn if the cache-line size is larger than the descriptor size. In such
299 * cases the driver will likely fail because the CPU needs to flush the cache
300 * when requeuing RX buffers, therefore descriptors written by the hardware
303 * This can be fixed by defining CONFIG_SYS_NONCACHED_MEMORY which will cause
304 * the driver to allocate descriptors from a pool of non-cached memory.
306 #if RTL8169_DESC_SIZE < ARCH_DMA_MINALIGN
307 #if !defined(CONFIG_SYS_NONCACHED_MEMORY) && \
308 !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) && !defined(CONFIG_X86)
309 #warning cache-line size is larger than descriptor size
314 * Create a static buffer of size RX_BUF_SZ for each TX Descriptor. All
315 * descriptors point to a part of this buffer.
317 DEFINE_ALIGN_BUFFER(u8, txb, NUM_TX_DESC * RX_BUF_SIZE, RTL8169_ALIGN);
320 * Create a static buffer of size RX_BUF_SZ for each RX Descriptor. All
321 * descriptors point to a part of this buffer.
323 DEFINE_ALIGN_BUFFER(u8, rxb, NUM_RX_DESC * RX_BUF_SIZE, RTL8169_ALIGN);
325 struct rtl8169_private {
327 void *mmio_addr; /* memory map physical address */
329 unsigned long cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */
330 unsigned long cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */
331 unsigned long dirty_tx;
332 struct TxDesc *TxDescArray; /* Index of 256-alignment Tx Descriptor buffer */
333 struct RxDesc *RxDescArray; /* Index of 256-alignment Rx Descriptor buffer */
334 unsigned char *RxBufferRings; /* Index of Rx Buffer */
335 unsigned char *RxBufferRing[NUM_RX_DESC]; /* Index of Rx Buffer array */
336 unsigned char *Tx_skbuff[NUM_TX_DESC];
339 static struct rtl8169_private *tpc;
341 static const unsigned int rtl8169_rx_config =
342 (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
344 static struct pci_device_id supported[] = {
345 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167) },
346 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168) },
347 { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169) },
351 void mdio_write(int RegAddr, int value)
355 RTL_W32(PHYAR, 0x80000000 | (RegAddr & 0xFF) << 16 | value);
358 for (i = 2000; i > 0; i--) {
359 /* Check if the RTL8169 has completed writing to the specified MII register */
360 if (!(RTL_R32(PHYAR) & 0x80000000)) {
368 int mdio_read(int RegAddr)
372 RTL_W32(PHYAR, 0x0 | (RegAddr & 0xFF) << 16);
375 for (i = 2000; i > 0; i--) {
376 /* Check if the RTL8169 has completed retrieving data from the specified MII register */
377 if (RTL_R32(PHYAR) & 0x80000000) {
378 value = (int) (RTL_R32(PHYAR) & 0xFFFF);
387 static int rtl8169_init_board(unsigned long dev_iobase, const char *name)
393 printf ("%s\n", __FUNCTION__);
397 /* Soft reset the chip. */
398 RTL_W8(ChipCmd, CmdReset);
400 /* Check that the chip has finished the reset. */
401 for (i = 1000; i > 0; i--)
402 if ((RTL_R8(ChipCmd) & CmdReset) == 0)
407 /* identify chip attached to board */
408 tmp = RTL_R32(TxConfig);
409 tmp = ((tmp & 0x7c000000) + ((tmp & 0x00800000) << 2)) >> 24;
411 for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--){
412 if (tmp == rtl_chip_info[i].version) {
418 /* if unknown chip, assume array element #0, original RTL-8169 in this case */
419 printf("PCI device %s: unknown chip version, assuming RTL-8169\n",
421 printf("PCI device: TxConfig = 0x%lX\n", (unsigned long) RTL_R32(TxConfig));
429 * TX and RX descriptors are 16 bytes. This causes problems with the cache
430 * maintenance on CPUs where the cache-line size exceeds the size of these
431 * descriptors. What will happen is that when the driver receives a packet
432 * it will be immediately requeued for the hardware to reuse. The CPU will
433 * therefore need to flush the cache-line containing the descriptor, which
434 * will cause all other descriptors in the same cache-line to be flushed
435 * along with it. If one of those descriptors had been written to by the
436 * device those changes (and the associated packet) will be lost.
438 * To work around this, we make use of non-cached memory if available. If
439 * descriptors are mapped uncached there's no need to manually flush them
440 * or invalidate them.
442 * Note that this only applies to descriptors. The packet data buffers do
443 * not have the same constraints since they are 1536 bytes large, so they
444 * are unlikely to share cache-lines.
446 static void *rtl_alloc_descs(unsigned int num)
448 size_t size = num * RTL8169_DESC_SIZE;
450 #ifdef CONFIG_SYS_NONCACHED_MEMORY
451 return (void *)noncached_alloc(size, RTL8169_ALIGN);
453 return memalign(RTL8169_ALIGN, size);
458 * Cache maintenance functions. These are simple wrappers around the more
459 * general purpose flush_cache() and invalidate_dcache_range() functions.
462 static void rtl_inval_rx_desc(struct RxDesc *desc)
464 #ifndef CONFIG_SYS_NONCACHED_MEMORY
465 unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1);
466 unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN);
468 invalidate_dcache_range(start, end);
472 static void rtl_flush_rx_desc(struct RxDesc *desc)
474 #ifndef CONFIG_SYS_NONCACHED_MEMORY
475 flush_cache((unsigned long)desc, sizeof(*desc));
479 static void rtl_inval_tx_desc(struct TxDesc *desc)
481 #ifndef CONFIG_SYS_NONCACHED_MEMORY
482 unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1);
483 unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN);
485 invalidate_dcache_range(start, end);
489 static void rtl_flush_tx_desc(struct TxDesc *desc)
491 #ifndef CONFIG_SYS_NONCACHED_MEMORY
492 flush_cache((unsigned long)desc, sizeof(*desc));
496 static void rtl_inval_buffer(void *buf, size_t size)
498 unsigned long start = (unsigned long)buf & ~(ARCH_DMA_MINALIGN - 1);
499 unsigned long end = ALIGN(start + size, ARCH_DMA_MINALIGN);
501 invalidate_dcache_range(start, end);
504 static void rtl_flush_buffer(void *buf, size_t size)
506 flush_cache((unsigned long)buf, size);
509 /**************************************************************************
510 RECV - Receive a frame
511 ***************************************************************************/
513 static int rtl_recv_common(struct udevice *dev, unsigned long dev_iobase,
516 static int rtl_recv_common(pci_dev_t dev, unsigned long dev_iobase,
520 /* return true if there's an ethernet packet ready to read */
521 /* nic->packet should contain data on return */
522 /* nic->packetlen should contain length of data */
526 #ifdef DEBUG_RTL8169_RX
527 printf ("%s\n", __FUNCTION__);
531 cur_rx = tpc->cur_rx;
533 rtl_inval_rx_desc(&tpc->RxDescArray[cur_rx]);
535 if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) {
536 if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) {
537 length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx].
538 status) & 0x00001FFF) - 4;
540 rtl_inval_buffer(tpc->RxBufferRing[cur_rx], length);
541 memcpy(rxdata, tpc->RxBufferRing[cur_rx], length);
543 if (cur_rx == NUM_RX_DESC - 1)
544 tpc->RxDescArray[cur_rx].status =
545 cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
547 tpc->RxDescArray[cur_rx].status =
548 cpu_to_le32(OWNbit + RX_BUF_SIZE);
550 tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(
551 dm_pci_mem_to_phys(dev,
552 (pci_addr_t)(unsigned long)
553 tpc->RxBufferRing[cur_rx]));
555 tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(
556 pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)
557 tpc->RxBufferRing[cur_rx]));
559 rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]);
563 net_process_received_packet(rxdata, length);
569 cur_rx = (cur_rx + 1) % NUM_RX_DESC;
570 tpc->cur_rx = cur_rx;
574 ushort sts = RTL_R8(IntrStatus);
575 RTL_W8(IntrStatus, sts & ~(TxErr | RxErr | SYSErr));
576 udelay(100); /* wait */
578 tpc->cur_rx = cur_rx;
579 return (0); /* initially as this is called to flush the input */
583 int rtl8169_eth_recv(struct udevice *dev, int flags, uchar **packetp)
585 struct rtl8169_private *priv = dev_get_priv(dev);
587 return rtl_recv_common(dev, priv->iobase, packetp);
590 static int rtl_recv(struct eth_device *dev)
592 return rtl_recv_common((pci_dev_t)(unsigned long)dev->priv,
595 #endif /* nCONFIG_DM_ETH */
598 /**************************************************************************
599 SEND - Transmit a frame
600 ***************************************************************************/
602 static int rtl_send_common(struct udevice *dev, unsigned long dev_iobase,
603 void *packet, int length)
605 static int rtl_send_common(pci_dev_t dev, unsigned long dev_iobase,
606 void *packet, int length)
609 /* send the packet to destination */
613 int entry = tpc->cur_tx % NUM_TX_DESC;
617 #ifdef DEBUG_RTL8169_TX
618 int stime = currticks();
619 printf ("%s\n", __FUNCTION__);
620 printf("sending %d bytes\n", len);
625 /* point to the current txb incase multiple tx_rings are used */
626 ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE];
627 memcpy(ptxb, (char *)packet, (int)length);
629 while (len < ETH_ZLEN)
632 rtl_flush_buffer(ptxb, ALIGN(len, RTL8169_ALIGN));
634 tpc->TxDescArray[entry].buf_Haddr = 0;
636 tpc->TxDescArray[entry].buf_addr = cpu_to_le32(
637 dm_pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb));
639 tpc->TxDescArray[entry].buf_addr = cpu_to_le32(
640 pci_mem_to_phys(dev, (pci_addr_t)(unsigned long)ptxb));
642 if (entry != (NUM_TX_DESC - 1)) {
643 tpc->TxDescArray[entry].status =
644 cpu_to_le32((OWNbit | FSbit | LSbit) |
645 ((len > ETH_ZLEN) ? len : ETH_ZLEN));
647 tpc->TxDescArray[entry].status =
648 cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) |
649 ((len > ETH_ZLEN) ? len : ETH_ZLEN));
651 rtl_flush_tx_desc(&tpc->TxDescArray[entry]);
652 RTL_W8(TxPoll, 0x40); /* set polling bit */
655 to = currticks() + TX_TIMEOUT;
657 rtl_inval_tx_desc(&tpc->TxDescArray[entry]);
658 } while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit)
659 && (currticks() < to)); /* wait */
661 if (currticks() >= to) {
662 #ifdef DEBUG_RTL8169_TX
663 puts("tx timeout/error\n");
664 printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
668 #ifdef DEBUG_RTL8169_TX
673 /* Delay to make net console (nc) work properly */
679 int rtl8169_eth_send(struct udevice *dev, void *packet, int length)
681 struct rtl8169_private *priv = dev_get_priv(dev);
683 return rtl_send_common(dev, priv->iobase, packet, length);
687 static int rtl_send(struct eth_device *dev, void *packet, int length)
689 return rtl_send_common((pci_dev_t)(unsigned long)dev->priv,
690 dev->iobase, packet, length);
694 static void rtl8169_set_rx_mode(void)
696 u32 mc_filter[2]; /* Multicast hash filter */
701 printf ("%s\n", __FUNCTION__);
705 /* Too many to filter perfectly -- accept all multicasts. */
706 rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
707 mc_filter[1] = mc_filter[0] = 0xffffffff;
709 tmp = rtl8169_rx_config | rx_mode | (RTL_R32(RxConfig) &
710 rtl_chip_info[tpc->chipset].RxConfigMask);
712 RTL_W32(RxConfig, tmp);
713 RTL_W32(MAR0 + 0, mc_filter[0]);
714 RTL_W32(MAR0 + 4, mc_filter[1]);
718 static void rtl8169_hw_start(struct udevice *dev)
720 static void rtl8169_hw_start(pci_dev_t dev)
726 int stime = currticks();
727 printf ("%s\n", __FUNCTION__);
731 /* Soft reset the chip. */
732 RTL_W8(ChipCmd, CmdReset);
734 /* Check that the chip has finished the reset. */
735 for (i = 1000; i > 0; i--) {
736 if ((RTL_R8(ChipCmd) & CmdReset) == 0)
743 RTL_W8(Cfg9346, Cfg9346_Unlock);
745 /* RTL-8169sb/8110sb or previous version */
746 if (tpc->chipset <= 5)
747 RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
749 RTL_W8(EarlyTxThres, EarlyTxThld);
751 /* For gigabit rtl8169 */
752 RTL_W16(RxMaxSize, RxPacketMaxSize);
754 /* Set Rx Config register */
755 i = rtl8169_rx_config | (RTL_R32(RxConfig) &
756 rtl_chip_info[tpc->chipset].RxConfigMask);
757 RTL_W32(RxConfig, i);
759 /* Set DMA burst size and Interframe Gap Time */
760 RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) |
761 (InterFrameGap << TxInterFrameGapShift));
767 RTL_W32(TxDescStartAddrLow, dm_pci_mem_to_phys(dev,
768 (pci_addr_t)(unsigned long)tpc->TxDescArray));
770 RTL_W32(TxDescStartAddrLow, pci_mem_to_phys(dev,
771 (pci_addr_t)(unsigned long)tpc->TxDescArray));
773 RTL_W32(TxDescStartAddrHigh, (unsigned long)0);
775 RTL_W32(RxDescStartAddrLow, dm_pci_mem_to_phys(
776 dev, (pci_addr_t)(unsigned long)tpc->RxDescArray));
778 RTL_W32(RxDescStartAddrLow, pci_mem_to_phys(
779 dev, (pci_addr_t)(unsigned long)tpc->RxDescArray));
781 RTL_W32(RxDescStartAddrHigh, (unsigned long)0);
783 /* RTL-8169sc/8110sc or later version */
784 if (tpc->chipset > 5)
785 RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
787 RTL_W8(Cfg9346, Cfg9346_Lock);
790 RTL_W32(RxMissed, 0);
792 rtl8169_set_rx_mode();
794 /* no early-rx interrupts */
795 RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
798 printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
803 static void rtl8169_init_ring(struct udevice *dev)
805 static void rtl8169_init_ring(pci_dev_t dev)
811 int stime = currticks();
812 printf ("%s\n", __FUNCTION__);
818 memset(tpc->TxDescArray, 0x0, NUM_TX_DESC * sizeof(struct TxDesc));
819 memset(tpc->RxDescArray, 0x0, NUM_RX_DESC * sizeof(struct RxDesc));
821 for (i = 0; i < NUM_TX_DESC; i++) {
822 tpc->Tx_skbuff[i] = &txb[i];
825 for (i = 0; i < NUM_RX_DESC; i++) {
826 if (i == (NUM_RX_DESC - 1))
827 tpc->RxDescArray[i].status =
828 cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
830 tpc->RxDescArray[i].status =
831 cpu_to_le32(OWNbit + RX_BUF_SIZE);
833 tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
835 tpc->RxDescArray[i].buf_addr = cpu_to_le32(dm_pci_mem_to_phys(
836 dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i]));
838 tpc->RxDescArray[i].buf_addr = cpu_to_le32(pci_mem_to_phys(
839 dev, (pci_addr_t)(unsigned long)tpc->RxBufferRing[i]));
841 rtl_flush_rx_desc(&tpc->RxDescArray[i]);
845 printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
850 static void rtl8169_common_start(struct udevice *dev, unsigned char *enetaddr,
851 unsigned long dev_iobase)
853 static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr,
854 unsigned long dev_iobase)
860 int stime = currticks();
861 printf ("%s\n", __FUNCTION__);
866 rtl8169_init_ring(dev);
867 rtl8169_hw_start(dev);
868 /* Construct a perfect filter frame with the mac address as first match
869 * and broadcast for all others */
870 for (i = 0; i < 192; i++)
873 txb[0] = enetaddr[0];
874 txb[1] = enetaddr[1];
875 txb[2] = enetaddr[2];
876 txb[3] = enetaddr[3];
877 txb[4] = enetaddr[4];
878 txb[5] = enetaddr[5];
881 printf("%s elapsed time : %lu\n", __func__, currticks()-stime);
886 static int rtl8169_eth_start(struct udevice *dev)
888 struct eth_pdata *plat = dev_get_platdata(dev);
889 struct rtl8169_private *priv = dev_get_priv(dev);
891 rtl8169_common_start(dev, plat->enetaddr, priv->iobase);
896 /**************************************************************************
897 RESET - Finish setting up the ethernet interface
898 ***************************************************************************/
899 static int rtl_reset(struct eth_device *dev, bd_t *bis)
901 rtl8169_common_start((pci_dev_t)(unsigned long)dev->priv,
902 dev->enetaddr, dev->iobase);
906 #endif /* nCONFIG_DM_ETH */
908 static void rtl_halt_common(unsigned long dev_iobase)
913 printf ("%s\n", __FUNCTION__);
918 /* Stop the chip's Tx and Rx DMA processes. */
919 RTL_W8(ChipCmd, 0x00);
921 /* Disable interrupts by clearing the interrupt mask. */
922 RTL_W16(IntrMask, 0x0000);
924 RTL_W32(RxMissed, 0);
926 for (i = 0; i < NUM_RX_DESC; i++) {
927 tpc->RxBufferRing[i] = NULL;
932 void rtl8169_eth_stop(struct udevice *dev)
934 struct rtl8169_private *priv = dev_get_priv(dev);
936 rtl_halt_common(priv->iobase);
939 /**************************************************************************
940 HALT - Turn off ethernet interface
941 ***************************************************************************/
942 static void rtl_halt(struct eth_device *dev)
944 rtl_halt_common(dev->iobase);
949 static int rtl8169_write_hwaddr(struct udevice *dev)
951 struct eth_pdata *plat = dev_get_platdata(dev);
954 RTL_W8(Cfg9346, Cfg9346_Unlock);
956 for (i = 0; i < MAC_ADDR_LEN; i++)
957 RTL_W8(MAC0 + i, plat->enetaddr[i]);
959 RTL_W8(Cfg9346, Cfg9346_Lock);
965 /**************************************************************************
966 INIT - Look for an adapter, this routine's visible to the outside
967 ***************************************************************************/
969 #define board_found 1
971 static int rtl_init(unsigned long dev_ioaddr, const char *name,
972 unsigned char *enetaddr)
974 static int board_idx = -1;
976 int option = -1, Cap10_100 = 0, Cap1000 = 0;
979 printf ("%s\n", __FUNCTION__);
985 /* point to private storage */
988 rc = rtl8169_init_board(ioaddr, name);
992 /* Get MAC address. FIXME: read EEPROM */
993 for (i = 0; i < MAC_ADDR_LEN; i++)
994 enetaddr[i] = RTL_R8(MAC0 + i);
997 printf("chipset = %d\n", tpc->chipset);
998 printf("MAC Address");
999 for (i = 0; i < MAC_ADDR_LEN; i++)
1000 printf(":%02x", enetaddr[i]);
1004 #ifdef DEBUG_RTL8169
1005 /* Print out some hardware info */
1006 printf("%s: at ioaddr 0x%lx\n", name, ioaddr);
1009 /* if TBI is not endbled */
1010 if (!(RTL_R8(PHYstatus) & TBI_Enable)) {
1011 int val = mdio_read(PHY_AUTO_NEGO_REG);
1013 option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
1014 /* Force RTL8169 in 10/100/1000 Full/Half mode. */
1016 #ifdef DEBUG_RTL8169
1017 printf("%s: Force-mode Enabled.\n", name);
1019 Cap10_100 = 0, Cap1000 = 0;
1022 Cap10_100 = PHY_Cap_10_Half;
1023 Cap1000 = PHY_Cap_Null;
1026 Cap10_100 = PHY_Cap_10_Full;
1027 Cap1000 = PHY_Cap_Null;
1030 Cap10_100 = PHY_Cap_100_Half;
1031 Cap1000 = PHY_Cap_Null;
1034 Cap10_100 = PHY_Cap_100_Full;
1035 Cap1000 = PHY_Cap_Null;
1038 Cap10_100 = PHY_Cap_Null;
1039 Cap1000 = PHY_Cap_1000_Full;
1044 mdio_write(PHY_AUTO_NEGO_REG, Cap10_100 | (val & 0x1F)); /* leave PHY_AUTO_NEGO_REG bit4:0 unchanged */
1045 mdio_write(PHY_1000_CTRL_REG, Cap1000);
1047 #ifdef DEBUG_RTL8169
1048 printf("%s: Auto-negotiation Enabled.\n",
1051 /* enable 10/100 Full/Half Mode, leave PHY_AUTO_NEGO_REG bit4:0 unchanged */
1052 mdio_write(PHY_AUTO_NEGO_REG,
1053 PHY_Cap_10_Half | PHY_Cap_10_Full |
1054 PHY_Cap_100_Half | PHY_Cap_100_Full |
1057 /* enable 1000 Full Mode */
1058 mdio_write(PHY_1000_CTRL_REG, PHY_Cap_1000_Full);
1062 /* Enable auto-negotiation and restart auto-nigotiation */
1063 mdio_write(PHY_CTRL_REG,
1064 PHY_Enable_Auto_Nego | PHY_Restart_Auto_Nego);
1067 /* wait for auto-negotiation process */
1068 for (i = 10000; i > 0; i--) {
1069 /* check if auto-negotiation complete */
1070 if (mdio_read(PHY_STAT_REG) & PHY_Auto_Nego_Comp) {
1072 option = RTL_R8(PHYstatus);
1073 if (option & _1000bpsF) {
1074 #ifdef DEBUG_RTL8169
1075 printf("%s: 1000Mbps Full-duplex operation.\n",
1079 #ifdef DEBUG_RTL8169
1080 printf("%s: %sMbps %s-duplex operation.\n",
1082 (option & _100bps) ? "100" :
1084 (option & FullDup) ? "Full" :
1092 } /* end for-loop to wait for auto-negotiation process */
1096 #ifdef DEBUG_RTL8169
1098 ("%s: 1000Mbps Full-duplex operation, TBI Link %s!\n",
1100 (RTL_R32(TBICSR) & TBILinkOK) ? "OK" : "Failed");
1105 tpc->RxDescArray = rtl_alloc_descs(NUM_RX_DESC);
1106 if (!tpc->RxDescArray)
1109 tpc->TxDescArray = rtl_alloc_descs(NUM_TX_DESC);
1110 if (!tpc->TxDescArray)
1116 #ifndef CONFIG_DM_ETH
1117 int rtl8169_initialize(bd_t *bis)
1120 int card_number = 0;
1121 struct eth_device *dev;
1126 unsigned int region;
1131 if ((devno = pci_find_devices(supported, idx++)) < 0)
1134 pci_read_config_word(devno, PCI_DEVICE_ID, &device);
1145 pci_read_config_dword(devno, PCI_BASE_ADDRESS_0 + (region * 4), &iobase);
1148 debug ("rtl8169: REALTEK RTL8169 @0x%x\n", iobase);
1150 dev = (struct eth_device *)malloc(sizeof *dev);
1152 printf("Can not allocate memory of rtl8169\n");
1156 memset(dev, 0, sizeof(*dev));
1157 sprintf (dev->name, "RTL8169#%d", card_number);
1159 dev->priv = (void *)(unsigned long)devno;
1160 dev->iobase = (int)pci_mem_to_phys(devno, iobase);
1162 dev->init = rtl_reset;
1163 dev->halt = rtl_halt;
1164 dev->send = rtl_send;
1165 dev->recv = rtl_recv;
1167 err = rtl_init(dev->iobase, dev->name, dev->enetaddr);
1169 printf(pr_fmt("failed to initialize card: %d\n"), err);
1182 #ifdef CONFIG_DM_ETH
1183 static int rtl8169_eth_probe(struct udevice *dev)
1185 struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
1186 struct rtl8169_private *priv = dev_get_priv(dev);
1187 struct eth_pdata *plat = dev_get_platdata(dev);
1192 debug("rtl8169: REALTEK RTL8169 @0x%x\n", iobase);
1193 switch (pplat->device) {
1201 dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0 + region * 4, &iobase);
1203 priv->iobase = (int)dm_pci_mem_to_phys(dev, iobase);
1205 ret = rtl_init(priv->iobase, dev->name, plat->enetaddr);
1207 printf(pr_fmt("failed to initialize card: %d\n"), ret);
1214 static const struct eth_ops rtl8169_eth_ops = {
1215 .start = rtl8169_eth_start,
1216 .send = rtl8169_eth_send,
1217 .recv = rtl8169_eth_recv,
1218 .stop = rtl8169_eth_stop,
1219 .write_hwaddr = rtl8169_write_hwaddr,
1222 static const struct udevice_id rtl8169_eth_ids[] = {
1223 { .compatible = "realtek,rtl8169" },
1227 U_BOOT_DRIVER(eth_rtl8169) = {
1228 .name = "eth_rtl8169",
1230 .of_match = rtl8169_eth_ids,
1231 .probe = rtl8169_eth_probe,
1232 .ops = &rtl8169_eth_ops,
1233 .priv_auto_alloc_size = sizeof(struct rtl8169_private),
1234 .platdata_auto_alloc_size = sizeof(struct eth_pdata),
1237 U_BOOT_PCI_DEVICE(eth_rtl8169, supported);