Linux-libre 5.3.12-gnu
[librecmc/linux-libre.git] / drivers / net / phy / qsemi.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * drivers/net/phy/qsemi.c
4  *
5  * Driver for Quality Semiconductor PHYs
6  *
7  * Author: Andy Fleming
8  *
9  * Copyright (c) 2004 Freescale Semiconductor, Inc.
10  */
11 #include <linux/kernel.h>
12 #include <linux/string.h>
13 #include <linux/errno.h>
14 #include <linux/unistd.h>
15 #include <linux/interrupt.h>
16 #include <linux/init.h>
17 #include <linux/delay.h>
18 #include <linux/netdevice.h>
19 #include <linux/etherdevice.h>
20 #include <linux/skbuff.h>
21 #include <linux/spinlock.h>
22 #include <linux/mm.h>
23 #include <linux/module.h>
24 #include <linux/mii.h>
25 #include <linux/ethtool.h>
26 #include <linux/phy.h>
27
28 #include <asm/io.h>
29 #include <asm/irq.h>
30 #include <linux/uaccess.h>
31
32 /* ------------------------------------------------------------------------- */
33 /* The Quality Semiconductor QS6612 is used on the RPX CLLF                  */
34
35 /* register definitions */
36
37 #define MII_QS6612_MCR          17  /* Mode Control Register      */
38 #define MII_QS6612_FTR          27  /* Factory Test Register      */
39 #define MII_QS6612_MCO          28  /* Misc. Control Register     */
40 #define MII_QS6612_ISR          29  /* Interrupt Source Register  */
41 #define MII_QS6612_IMR          30  /* Interrupt Mask Register    */
42 #define MII_QS6612_IMR_INIT     0x003a
43 #define MII_QS6612_PCR          31  /* 100BaseTx PHY Control Reg. */
44
45 #define QS6612_PCR_AN_COMPLETE  0x1000
46 #define QS6612_PCR_RLBEN        0x0200
47 #define QS6612_PCR_DCREN        0x0100
48 #define QS6612_PCR_4B5BEN       0x0040
49 #define QS6612_PCR_TX_ISOLATE   0x0020
50 #define QS6612_PCR_MLT3_DIS     0x0002
51 #define QS6612_PCR_SCRM_DESCRM  0x0001
52
53 MODULE_DESCRIPTION("Quality Semiconductor PHY driver");
54 MODULE_AUTHOR("Andy Fleming");
55 MODULE_LICENSE("GPL");
56
57 /* Returns 0, unless there's a write error */
58 static int qs6612_config_init(struct phy_device *phydev)
59 {
60         /* The PHY powers up isolated on the RPX,
61          * so send a command to allow operation.
62          * XXX - My docs indicate this should be 0x0940
63          * ...or something.  The current value sets three
64          * reserved bits, bit 11, which specifies it should be
65          * set to one, bit 10, which specifies it should be set
66          * to 0, and bit 7, which doesn't specify.  However, my
67          * docs are preliminary, and I will leave it like this
68          * until someone more knowledgable corrects me or it.
69          * -- Andy Fleming
70          */
71         return phy_write(phydev, MII_QS6612_PCR, 0x0dc0);
72 }
73
74 static int qs6612_ack_interrupt(struct phy_device *phydev)
75 {
76         int err;
77
78         err = phy_read(phydev, MII_QS6612_ISR);
79
80         if (err < 0)
81                 return err;
82
83         err = phy_read(phydev, MII_BMSR);
84
85         if (err < 0)
86                 return err;
87
88         err = phy_read(phydev, MII_EXPANSION);
89
90         if (err < 0)
91                 return err;
92
93         return 0;
94 }
95
96 static int qs6612_config_intr(struct phy_device *phydev)
97 {
98         int err;
99         if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
100                 err = phy_write(phydev, MII_QS6612_IMR,
101                                 MII_QS6612_IMR_INIT);
102         else
103                 err = phy_write(phydev, MII_QS6612_IMR, 0);
104
105         return err;
106
107 }
108
109 static struct phy_driver qs6612_driver[] = { {
110         .phy_id         = 0x00181440,
111         .name           = "QS6612",
112         .phy_id_mask    = 0xfffffff0,
113         /* PHY_BASIC_FEATURES */
114         .config_init    = qs6612_config_init,
115         .ack_interrupt  = qs6612_ack_interrupt,
116         .config_intr    = qs6612_config_intr,
117 } };
118
119 module_phy_driver(qs6612_driver);
120
121 static struct mdio_device_id __maybe_unused qs6612_tbl[] = {
122         { 0x00181440, 0xfffffff0 },
123         { }
124 };
125
126 MODULE_DEVICE_TABLE(mdio, qs6612_tbl);