usb: kbd: don't use int xfers when polling via ctrl xfers
[oweals/u-boot.git] / drivers / net / fm / init.c
1 /*
2  * Copyright 2011-2015 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6 #include <errno.h>
7 #include <common.h>
8 #include <asm/io.h>
9 #include <fsl_mdio.h>
10 #ifdef CONFIG_FSL_LAYERSCAPE
11 #include <asm/arch/fsl_serdes.h>
12 #else
13 #include <asm/fsl_serdes.h>
14 #endif
15
16 #include "fm.h"
17
18 struct fm_eth_info fm_info[] = {
19 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 1)
20         FM_DTSEC_INFO_INITIALIZER(1, 1),
21 #endif
22 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 2)
23         FM_DTSEC_INFO_INITIALIZER(1, 2),
24 #endif
25 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 3)
26         FM_DTSEC_INFO_INITIALIZER(1, 3),
27 #endif
28 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 4)
29         FM_DTSEC_INFO_INITIALIZER(1, 4),
30 #endif
31 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 5)
32         FM_DTSEC_INFO_INITIALIZER(1, 5),
33 #endif
34 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 6)
35         FM_DTSEC_INFO_INITIALIZER(1, 6),
36 #endif
37 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 7)
38         FM_DTSEC_INFO_INITIALIZER(1, 9),
39 #endif
40 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 8)
41         FM_DTSEC_INFO_INITIALIZER(1, 10),
42 #endif
43 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 1)
44         FM_DTSEC_INFO_INITIALIZER(2, 1),
45 #endif
46 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 2)
47         FM_DTSEC_INFO_INITIALIZER(2, 2),
48 #endif
49 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 3)
50         FM_DTSEC_INFO_INITIALIZER(2, 3),
51 #endif
52 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 4)
53         FM_DTSEC_INFO_INITIALIZER(2, 4),
54 #endif
55 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 5)
56         FM_DTSEC_INFO_INITIALIZER(2, 5),
57 #endif
58 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 6)
59         FM_DTSEC_INFO_INITIALIZER(2, 6),
60 #endif
61 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 7)
62         FM_DTSEC_INFO_INITIALIZER(2, 9),
63 #endif
64 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 8)
65         FM_DTSEC_INFO_INITIALIZER(2, 10),
66 #endif
67 #if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
68         FM_TGEC_INFO_INITIALIZER(1, 1),
69 #endif
70 #if (CONFIG_SYS_NUM_FM1_10GEC >= 2)
71         FM_TGEC_INFO_INITIALIZER(1, 2),
72 #endif
73 #if (CONFIG_SYS_NUM_FM1_10GEC >= 3)
74         FM_TGEC_INFO_INITIALIZER2(1, 3),
75 #endif
76 #if (CONFIG_SYS_NUM_FM1_10GEC >= 4)
77         FM_TGEC_INFO_INITIALIZER2(1, 4),
78 #endif
79 #if (CONFIG_SYS_NUM_FM2_10GEC >= 1)
80         FM_TGEC_INFO_INITIALIZER(2, 1),
81 #endif
82 #if (CONFIG_SYS_NUM_FM2_10GEC >= 2)
83         FM_TGEC_INFO_INITIALIZER(2, 2),
84 #endif
85 };
86
87 int fm_standard_init(bd_t *bis)
88 {
89         int i;
90         struct ccsr_fman *reg;
91
92         reg = (void *)CONFIG_SYS_FSL_FM1_ADDR;
93         if (fm_init_common(0, reg))
94                 return 0;
95
96         for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
97                 if ((fm_info[i].enabled) && (fm_info[i].index == 1))
98                         fm_eth_initialize(reg, &fm_info[i]);
99         }
100
101 #if (CONFIG_SYS_NUM_FMAN == 2)
102         reg = (void *)CONFIG_SYS_FSL_FM2_ADDR;
103         if (fm_init_common(1, reg))
104                 return 0;
105
106         for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
107                 if ((fm_info[i].enabled) && (fm_info[i].index == 2))
108                         fm_eth_initialize(reg, &fm_info[i]);
109         }
110 #endif
111
112         return 1;
113 }
114
115 /* simple linear search to map from port to array index */
116 static int fm_port_to_index(enum fm_port port)
117 {
118         int i;
119
120         for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
121                 if (fm_info[i].port == port)
122                         return i;
123         }
124
125         return -1;
126 }
127
128 /*
129  * Determine if an interface is actually active based on HW config
130  * we expect fman_port_enet_if() to report PHY_INTERFACE_MODE_NONE if
131  * the interface is not active based on HW cfg of the SoC
132  */
133 void fman_enet_init(void)
134 {
135         int i;
136
137         for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
138                 phy_interface_t enet_if;
139
140                 enet_if = fman_port_enet_if(fm_info[i].port);
141                 if (enet_if != PHY_INTERFACE_MODE_NONE) {
142                         fm_info[i].enabled = 1;
143                         fm_info[i].enet_if = enet_if;
144                 } else {
145                         fm_info[i].enabled = 0;
146                 }
147         }
148
149         return ;
150 }
151
152 void fm_disable_port(enum fm_port port)
153 {
154         int i = fm_port_to_index(port);
155
156         if (i == -1)
157                 return;
158
159         fm_info[i].enabled = 0;
160 #ifndef CONFIG_SYS_FMAN_V3
161         fman_disable_port(port);
162 #endif
163 }
164
165 void fm_enable_port(enum fm_port port)
166 {
167         int i = fm_port_to_index(port);
168
169         if (i == -1)
170                 return;
171
172         fm_info[i].enabled = 1;
173         fman_enable_port(port);
174 }
175
176 void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus)
177 {
178         int i = fm_port_to_index(port);
179
180         if (i == -1)
181                 return;
182
183         fm_info[i].bus = bus;
184 }
185
186 void fm_info_set_phy_address(enum fm_port port, int address)
187 {
188         int i = fm_port_to_index(port);
189
190         if (i == -1)
191                 return;
192
193         fm_info[i].phy_addr = address;
194 }
195
196 /*
197  * Returns the PHY address for a given Fman port
198  *
199  * The port must be set via a prior call to fm_info_set_phy_address().
200  * A negative error code is returned if the port is invalid.
201  */
202 int fm_info_get_phy_address(enum fm_port port)
203 {
204         int i = fm_port_to_index(port);
205
206         if (i == -1)
207                 return -1;
208
209         return fm_info[i].phy_addr;
210 }
211
212 /*
213  * Returns the type of the data interface between the given MAC and its PHY.
214  * This is typically determined by the RCW.
215  */
216 phy_interface_t fm_info_get_enet_if(enum fm_port port)
217 {
218         int i = fm_port_to_index(port);
219
220         if (i == -1)
221                 return PHY_INTERFACE_MODE_NONE;
222
223         if (fm_info[i].enabled)
224                 return fm_info[i].enet_if;
225
226         return PHY_INTERFACE_MODE_NONE;
227 }
228
229 static void
230 __def_board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
231                                 enum fm_port port, int offset)
232 {
233         return ;
234 }
235
236 void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
237                                 enum fm_port port, int offset)
238          __attribute__((weak, alias("__def_board_ft_fman_fixup_port")));
239
240 int ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
241 {
242         int off;
243         uint32_t ph;
244         phys_addr_t paddr = CONFIG_SYS_CCSRBAR_PHYS + info->compat_offset;
245         u64 dtsec1_addr = (u64)CONFIG_SYS_CCSRBAR_PHYS +
246                                 CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET;
247
248         off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
249         if (off == -FDT_ERR_NOTFOUND)
250                 return -EINVAL;
251
252         if (info->enabled) {
253                 fdt_fixup_phy_connection(blob, off, info->enet_if);
254                 board_ft_fman_fixup_port(blob, prop, paddr, info->port, off);
255                 return 0;
256         }
257
258 #ifdef CONFIG_SYS_FMAN_V3
259 #ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
260         /*
261          * On T2/T4 SoCs, physically FM1_DTSEC9 and FM1_10GEC1 use the same
262          * dual-role MAC, when FM1_10GEC1 is enabled and  FM1_DTSEC9
263          * is disabled, ensure that the dual-role MAC is not disabled,
264          * ditto for other dual-role MACs.
265          */
266         if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
267             ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
268             ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
269             ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
270             ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))  ||
271             ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
272             ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
273             ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2)))
274 #if (CONFIG_SYS_NUM_FMAN == 2)
275                                                                                 ||
276             ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1)))       ||
277             ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2)))      ||
278             ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9)))       ||
279             ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
280 #endif
281 #else
282         /* FM1_DTSECx and FM1_10GECx use the same dual-role MAC */
283         if (((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
284             ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC2)))  ||
285             ((info->port == FM1_DTSEC3) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
286             ((info->port == FM1_DTSEC4) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
287             ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
288             ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC2)))  ||
289             ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC3)))  ||
290             ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC4)))
291 #endif
292         )
293                 return 0;
294 #endif
295         /* board code might have caused offset to change */
296         off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
297
298         /* Don't disable FM1-DTSEC1 MAC as its used for MDIO */
299         if (paddr != dtsec1_addr)
300                 fdt_status_disabled(blob, off); /* disable the MAC node */
301
302         /* disable the fsl,dpa-ethernet node that points to the MAC */
303         ph = fdt_get_phandle(blob, off);
304         do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
305                 "status", "disabled", strlen("disabled") + 1, 1);
306
307         return 0;
308 }
309
310 void fdt_fixup_fman_ethernet(void *blob)
311 {
312         int i;
313
314 #ifdef CONFIG_SYS_FMAN_V3
315         for (i = 0; i < ARRAY_SIZE(fm_info); i++)
316                 ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
317 #else
318         for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
319                 /* Try the new compatible first.
320                  * If the node is missing, try the old.
321                  */
322                 if (fm_info[i].type == FM_ETH_1G_E) {
323                         if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-dtsec"))
324                                 ft_fixup_port(blob, &fm_info[i],
325                                               "fsl,fman-1g-mac");
326                 } else {
327                         if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-tgec"))
328                                 ft_fixup_port(blob, &fm_info[i],
329                                               "fsl,fman-10g-mac");
330                 }
331         }
332 #endif
333 }
334
335 /*QSGMII Riser Card can work in SGMII mode, but the PHY address is different.
336  *This function scans which Riser Card being used(QSGMII or SGMII Riser Card),
337  *then set the correct PHY address
338  */
339 void set_sgmii_phy(struct mii_dev *bus, enum fm_port base_port,
340                 unsigned int port_num, int phy_base_addr)
341 {
342         unsigned int regnum = 0;
343         int qsgmii;
344         int i;
345         int phy_real_addr;
346
347         qsgmii = is_qsgmii_riser_card(bus, phy_base_addr, port_num, regnum);
348
349         if (!qsgmii)
350                 return;
351
352         for (i = base_port; i < base_port + port_num; i++) {
353                 if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_SGMII) {
354                         phy_real_addr = phy_base_addr + i - base_port;
355                         fm_info_set_phy_address(i, phy_real_addr);
356                 }
357         }
358 }
359
360 /*to check whether qsgmii riser card is used*/
361 int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,
362                 unsigned int port_num, unsigned regnum)
363 {
364         int i;
365         int val;
366
367         if (!bus)
368                 return 0;
369
370         for (i = phy_base_addr; i < phy_base_addr + port_num; i++) {
371                 val = bus->read(bus, i, MDIO_DEVAD_NONE, regnum);
372                 if (val != MIIM_TIMEOUT)
373                         return 1;
374         }
375
376         return 0;
377 }