Linux-libre 5.3.12-gnu
[librecmc/linux-libre.git] / drivers / net / ethernet / toshiba / ps3_gelic_net.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  PS3 gelic network driver.
4  *
5  * Copyright (C) 2007 Sony Computer Entertainment Inc.
6  * Copyright 2006, 2007 Sony Corporation
7  *
8  * This file is based on: spider_net.c
9  *
10  * (C) Copyright IBM Corp. 2005
11  *
12  * Authors : Utz Bacher <utz.bacher@de.ibm.com>
13  *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
14  */
15
16 #undef DEBUG
17
18 #include <linux/interrupt.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/slab.h>
22
23 #include <linux/etherdevice.h>
24 #include <linux/ethtool.h>
25 #include <linux/if_vlan.h>
26
27 #include <linux/in.h>
28 #include <linux/ip.h>
29 #include <linux/tcp.h>
30
31 #include <linux/dma-mapping.h>
32 #include <net/checksum.h>
33 #include <asm/firmware.h>
34 #include <asm/ps3.h>
35 #include <asm/lv1call.h>
36
37 #include "ps3_gelic_net.h"
38 #include "ps3_gelic_wireless.h"
39
40 #define DRV_NAME "Gelic Network Driver"
41 #define DRV_VERSION "2.0"
42
43 MODULE_AUTHOR("SCE Inc.");
44 MODULE_DESCRIPTION("Gelic Network driver");
45 MODULE_LICENSE("GPL");
46
47
48 /* set irq_mask */
49 int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask)
50 {
51         int status;
52
53         status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
54                                             mask, 0);
55         if (status)
56                 dev_info(ctodev(card),
57                          "%s failed %d\n", __func__, status);
58         return status;
59 }
60
61 static void gelic_card_rx_irq_on(struct gelic_card *card)
62 {
63         card->irq_mask |= GELIC_CARD_RXINT;
64         gelic_card_set_irq_mask(card, card->irq_mask);
65 }
66 static void gelic_card_rx_irq_off(struct gelic_card *card)
67 {
68         card->irq_mask &= ~GELIC_CARD_RXINT;
69         gelic_card_set_irq_mask(card, card->irq_mask);
70 }
71
72 static void gelic_card_get_ether_port_status(struct gelic_card *card,
73                                              int inform)
74 {
75         u64 v2;
76         struct net_device *ether_netdev;
77
78         lv1_net_control(bus_id(card), dev_id(card),
79                         GELIC_LV1_GET_ETH_PORT_STATUS,
80                         GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
81                         &card->ether_port_status, &v2);
82
83         if (inform) {
84                 ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0];
85                 if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP)
86                         netif_carrier_on(ether_netdev);
87                 else
88                         netif_carrier_off(ether_netdev);
89         }
90 }
91
92 /**
93  * gelic_descr_get_status -- returns the status of a descriptor
94  * @descr: descriptor to look at
95  *
96  * returns the status as in the dmac_cmd_status field of the descriptor
97  */
98 static enum gelic_descr_dma_status
99 gelic_descr_get_status(struct gelic_descr *descr)
100 {
101         return be32_to_cpu(descr->dmac_cmd_status) & GELIC_DESCR_DMA_STAT_MASK;
102 }
103
104 static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
105 {
106         int status;
107         u64 v1, v2;
108
109         status = lv1_net_control(bus_id(card), dev_id(card),
110                                  GELIC_LV1_SET_NEGOTIATION_MODE,
111                                  GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2);
112         if (status) {
113                 pr_info("%s: failed setting negotiation mode %d\n", __func__,
114                         status);
115                 return -EBUSY;
116         }
117
118         card->link_mode = mode;
119         return 0;
120 }
121
122 /**
123  * gelic_card_disable_txdmac - disables the transmit DMA controller
124  * @card: card structure
125  *
126  * gelic_card_disable_txdmac terminates processing on the DMA controller by
127  * turing off DMA and issuing a force end
128  */
129 static void gelic_card_disable_txdmac(struct gelic_card *card)
130 {
131         int status;
132
133         /* this hvc blocks until the DMA in progress really stopped */
134         status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
135         if (status)
136                 dev_err(ctodev(card),
137                         "lv1_net_stop_tx_dma failed, status=%d\n", status);
138 }
139
140 /**
141  * gelic_card_enable_rxdmac - enables the receive DMA controller
142  * @card: card structure
143  *
144  * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
145  * in the GDADMACCNTR register
146  */
147 static void gelic_card_enable_rxdmac(struct gelic_card *card)
148 {
149         int status;
150
151 #ifdef DEBUG
152         if (gelic_descr_get_status(card->rx_chain.head) !=
153             GELIC_DESCR_DMA_CARDOWNED) {
154                 printk(KERN_ERR "%s: status=%x\n", __func__,
155                        be32_to_cpu(card->rx_chain.head->dmac_cmd_status));
156                 printk(KERN_ERR "%s: nextphy=%x\n", __func__,
157                        be32_to_cpu(card->rx_chain.head->next_descr_addr));
158                 printk(KERN_ERR "%s: head=%p\n", __func__,
159                        card->rx_chain.head);
160         }
161 #endif
162         status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
163                                 card->rx_chain.head->bus_addr, 0);
164         if (status)
165                 dev_info(ctodev(card),
166                          "lv1_net_start_rx_dma failed, status=%d\n", status);
167 }
168
169 /**
170  * gelic_card_disable_rxdmac - disables the receive DMA controller
171  * @card: card structure
172  *
173  * gelic_card_disable_rxdmac terminates processing on the DMA controller by
174  * turing off DMA and issuing a force end
175  */
176 static void gelic_card_disable_rxdmac(struct gelic_card *card)
177 {
178         int status;
179
180         /* this hvc blocks until the DMA in progress really stopped */
181         status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
182         if (status)
183                 dev_err(ctodev(card),
184                         "lv1_net_stop_rx_dma failed, %d\n", status);
185 }
186
187 /**
188  * gelic_descr_set_status -- sets the status of a descriptor
189  * @descr: descriptor to change
190  * @status: status to set in the descriptor
191  *
192  * changes the status to the specified value. Doesn't change other bits
193  * in the status
194  */
195 static void gelic_descr_set_status(struct gelic_descr *descr,
196                                    enum gelic_descr_dma_status status)
197 {
198         descr->dmac_cmd_status = cpu_to_be32(status |
199                         (be32_to_cpu(descr->dmac_cmd_status) &
200                          ~GELIC_DESCR_DMA_STAT_MASK));
201         /*
202          * dma_cmd_status field is used to indicate whether the descriptor
203          * is valid or not.
204          * Usually caller of this function wants to inform that to the
205          * hardware, so we assure here the hardware sees the change.
206          */
207         wmb();
208 }
209
210 /**
211  * gelic_card_reset_chain - reset status of a descriptor chain
212  * @card: card structure
213  * @chain: address of chain
214  * @start_descr: address of descriptor array
215  *
216  * Reset the status of dma descriptors to ready state
217  * and re-initialize the hardware chain for later use
218  */
219 static void gelic_card_reset_chain(struct gelic_card *card,
220                                    struct gelic_descr_chain *chain,
221                                    struct gelic_descr *start_descr)
222 {
223         struct gelic_descr *descr;
224
225         for (descr = start_descr; start_descr != descr->next; descr++) {
226                 gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
227                 descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
228         }
229
230         chain->head = start_descr;
231         chain->tail = (descr - 1);
232
233         (descr - 1)->next_descr_addr = 0;
234 }
235
236 void gelic_card_up(struct gelic_card *card)
237 {
238         pr_debug("%s: called\n", __func__);
239         mutex_lock(&card->updown_lock);
240         if (atomic_inc_return(&card->users) == 1) {
241                 pr_debug("%s: real do\n", __func__);
242                 /* enable irq */
243                 gelic_card_set_irq_mask(card, card->irq_mask);
244                 /* start rx */
245                 gelic_card_enable_rxdmac(card);
246
247                 napi_enable(&card->napi);
248         }
249         mutex_unlock(&card->updown_lock);
250         pr_debug("%s: done\n", __func__);
251 }
252
253 void gelic_card_down(struct gelic_card *card)
254 {
255         u64 mask;
256         pr_debug("%s: called\n", __func__);
257         mutex_lock(&card->updown_lock);
258         if (atomic_dec_if_positive(&card->users) == 0) {
259                 pr_debug("%s: real do\n", __func__);
260                 napi_disable(&card->napi);
261                 /*
262                  * Disable irq. Wireless interrupts will
263                  * be disabled later if any
264                  */
265                 mask = card->irq_mask & (GELIC_CARD_WLAN_EVENT_RECEIVED |
266                                          GELIC_CARD_WLAN_COMMAND_COMPLETED);
267                 gelic_card_set_irq_mask(card, mask);
268                 /* stop rx */
269                 gelic_card_disable_rxdmac(card);
270                 gelic_card_reset_chain(card, &card->rx_chain,
271                                        card->descr + GELIC_NET_TX_DESCRIPTORS);
272                 /* stop tx */
273                 gelic_card_disable_txdmac(card);
274         }
275         mutex_unlock(&card->updown_lock);
276         pr_debug("%s: done\n", __func__);
277 }
278
279 /**
280  * gelic_card_free_chain - free descriptor chain
281  * @card: card structure
282  * @descr_in: address of desc
283  */
284 static void gelic_card_free_chain(struct gelic_card *card,
285                                   struct gelic_descr *descr_in)
286 {
287         struct gelic_descr *descr;
288
289         for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) {
290                 dma_unmap_single(ctodev(card), descr->bus_addr,
291                                  GELIC_DESCR_SIZE, DMA_BIDIRECTIONAL);
292                 descr->bus_addr = 0;
293         }
294 }
295
296 /**
297  * gelic_card_init_chain - links descriptor chain
298  * @card: card structure
299  * @chain: address of chain
300  * @start_descr: address of descriptor array
301  * @no: number of descriptors
302  *
303  * we manage a circular list that mirrors the hardware structure,
304  * except that the hardware uses bus addresses.
305  *
306  * returns 0 on success, <0 on failure
307  */
308 static int gelic_card_init_chain(struct gelic_card *card,
309                                  struct gelic_descr_chain *chain,
310                                  struct gelic_descr *start_descr, int no)
311 {
312         int i;
313         struct gelic_descr *descr;
314
315         descr = start_descr;
316         memset(descr, 0, sizeof(*descr) * no);
317
318         /* set up the hardware pointers in each descriptor */
319         for (i = 0; i < no; i++, descr++) {
320                 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
321                 descr->bus_addr =
322                         dma_map_single(ctodev(card), descr,
323                                        GELIC_DESCR_SIZE,
324                                        DMA_BIDIRECTIONAL);
325
326                 if (!descr->bus_addr)
327                         goto iommu_error;
328
329                 descr->next = descr + 1;
330                 descr->prev = descr - 1;
331         }
332         /* make them as ring */
333         (descr - 1)->next = start_descr;
334         start_descr->prev = (descr - 1);
335
336         /* chain bus addr of hw descriptor */
337         descr = start_descr;
338         for (i = 0; i < no; i++, descr++) {
339                 descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
340         }
341
342         chain->head = start_descr;
343         chain->tail = start_descr;
344
345         /* do not chain last hw descriptor */
346         (descr - 1)->next_descr_addr = 0;
347
348         return 0;
349
350 iommu_error:
351         for (i--, descr--; 0 <= i; i--, descr--)
352                 if (descr->bus_addr)
353                         dma_unmap_single(ctodev(card), descr->bus_addr,
354                                          GELIC_DESCR_SIZE,
355                                          DMA_BIDIRECTIONAL);
356         return -ENOMEM;
357 }
358
359 /**
360  * gelic_descr_prepare_rx - reinitializes a rx descriptor
361  * @card: card structure
362  * @descr: descriptor to re-init
363  *
364  * return 0 on success, <0 on failure
365  *
366  * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
367  * Activate the descriptor state-wise
368  */
369 static int gelic_descr_prepare_rx(struct gelic_card *card,
370                                   struct gelic_descr *descr)
371 {
372         int offset;
373         unsigned int bufsize;
374
375         if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE)
376                 dev_info(ctodev(card), "%s: ERROR status\n", __func__);
377         /* we need to round up the buffer size to a multiple of 128 */
378         bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
379
380         /* and we need to have it 128 byte aligned, therefore we allocate a
381          * bit more */
382         descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1);
383         if (!descr->skb) {
384                 descr->buf_addr = 0; /* tell DMAC don't touch memory */
385                 dev_info(ctodev(card),
386                          "%s:allocate skb failed !!\n", __func__);
387                 return -ENOMEM;
388         }
389         descr->buf_size = cpu_to_be32(bufsize);
390         descr->dmac_cmd_status = 0;
391         descr->result_size = 0;
392         descr->valid_size = 0;
393         descr->data_error = 0;
394
395         offset = ((unsigned long)descr->skb->data) &
396                 (GELIC_NET_RXBUF_ALIGN - 1);
397         if (offset)
398                 skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
399         /* io-mmu-map the skb */
400         descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
401                                                      descr->skb->data,
402                                                      GELIC_NET_MAX_MTU,
403                                                      DMA_FROM_DEVICE));
404         if (!descr->buf_addr) {
405                 dev_kfree_skb_any(descr->skb);
406                 descr->skb = NULL;
407                 dev_info(ctodev(card),
408                          "%s:Could not iommu-map rx buffer\n", __func__);
409                 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
410                 return -ENOMEM;
411         } else {
412                 gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
413                 return 0;
414         }
415 }
416
417 /**
418  * gelic_card_release_rx_chain - free all skb of rx descr
419  * @card: card structure
420  *
421  */
422 static void gelic_card_release_rx_chain(struct gelic_card *card)
423 {
424         struct gelic_descr *descr = card->rx_chain.head;
425
426         do {
427                 if (descr->skb) {
428                         dma_unmap_single(ctodev(card),
429                                          be32_to_cpu(descr->buf_addr),
430                                          descr->skb->len,
431                                          DMA_FROM_DEVICE);
432                         descr->buf_addr = 0;
433                         dev_kfree_skb_any(descr->skb);
434                         descr->skb = NULL;
435                         gelic_descr_set_status(descr,
436                                                GELIC_DESCR_DMA_NOT_IN_USE);
437                 }
438                 descr = descr->next;
439         } while (descr != card->rx_chain.head);
440 }
441
442 /**
443  * gelic_card_fill_rx_chain - fills descriptors/skbs in the rx chains
444  * @card: card structure
445  *
446  * fills all descriptors in the rx chain: allocates skbs
447  * and iommu-maps them.
448  * returns 0 on success, < 0 on failure
449  */
450 static int gelic_card_fill_rx_chain(struct gelic_card *card)
451 {
452         struct gelic_descr *descr = card->rx_chain.head;
453         int ret;
454
455         do {
456                 if (!descr->skb) {
457                         ret = gelic_descr_prepare_rx(card, descr);
458                         if (ret)
459                                 goto rewind;
460                 }
461                 descr = descr->next;
462         } while (descr != card->rx_chain.head);
463
464         return 0;
465 rewind:
466         gelic_card_release_rx_chain(card);
467         return ret;
468 }
469
470 /**
471  * gelic_card_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
472  * @card: card structure
473  *
474  * returns 0 on success, < 0 on failure
475  */
476 static int gelic_card_alloc_rx_skbs(struct gelic_card *card)
477 {
478         struct gelic_descr_chain *chain;
479         int ret;
480         chain = &card->rx_chain;
481         ret = gelic_card_fill_rx_chain(card);
482         chain->tail = card->rx_top->prev; /* point to the last */
483         return ret;
484 }
485
486 /**
487  * gelic_descr_release_tx - processes a used tx descriptor
488  * @card: card structure
489  * @descr: descriptor to release
490  *
491  * releases a used tx descriptor (unmapping, freeing of skb)
492  */
493 static void gelic_descr_release_tx(struct gelic_card *card,
494                                        struct gelic_descr *descr)
495 {
496         struct sk_buff *skb = descr->skb;
497
498         BUG_ON(!(be32_to_cpu(descr->data_status) & GELIC_DESCR_TX_TAIL));
499
500         dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), skb->len,
501                          DMA_TO_DEVICE);
502         dev_kfree_skb_any(skb);
503
504         descr->buf_addr = 0;
505         descr->buf_size = 0;
506         descr->next_descr_addr = 0;
507         descr->result_size = 0;
508         descr->valid_size = 0;
509         descr->data_status = 0;
510         descr->data_error = 0;
511         descr->skb = NULL;
512
513         /* set descr status */
514         gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
515 }
516
517 static void gelic_card_stop_queues(struct gelic_card *card)
518 {
519         netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
520
521         if (card->netdev[GELIC_PORT_WIRELESS])
522                 netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]);
523 }
524 static void gelic_card_wake_queues(struct gelic_card *card)
525 {
526         netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
527
528         if (card->netdev[GELIC_PORT_WIRELESS])
529                 netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]);
530 }
531 /**
532  * gelic_card_release_tx_chain - processes sent tx descriptors
533  * @card: adapter structure
534  * @stop: net_stop sequence
535  *
536  * releases the tx descriptors that gelic has finished with
537  */
538 static void gelic_card_release_tx_chain(struct gelic_card *card, int stop)
539 {
540         struct gelic_descr_chain *tx_chain;
541         enum gelic_descr_dma_status status;
542         struct net_device *netdev;
543         int release = 0;
544
545         for (tx_chain = &card->tx_chain;
546              tx_chain->head != tx_chain->tail && tx_chain->tail;
547              tx_chain->tail = tx_chain->tail->next) {
548                 status = gelic_descr_get_status(tx_chain->tail);
549                 netdev = tx_chain->tail->skb->dev;
550                 switch (status) {
551                 case GELIC_DESCR_DMA_RESPONSE_ERROR:
552                 case GELIC_DESCR_DMA_PROTECTION_ERROR:
553                 case GELIC_DESCR_DMA_FORCE_END:
554                         if (printk_ratelimit())
555                                 dev_info(ctodev(card),
556                                          "%s: forcing end of tx descriptor " \
557                                          "with status %x\n",
558                                          __func__, status);
559                         netdev->stats.tx_dropped++;
560                         break;
561
562                 case GELIC_DESCR_DMA_COMPLETE:
563                         if (tx_chain->tail->skb) {
564                                 netdev->stats.tx_packets++;
565                                 netdev->stats.tx_bytes +=
566                                         tx_chain->tail->skb->len;
567                         }
568                         break;
569
570                 case GELIC_DESCR_DMA_CARDOWNED:
571                         /* pending tx request */
572                 default:
573                         /* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */
574                         if (!stop)
575                                 goto out;
576                 }
577                 gelic_descr_release_tx(card, tx_chain->tail);
578                 release ++;
579         }
580 out:
581         if (!stop && release)
582                 gelic_card_wake_queues(card);
583 }
584
585 /**
586  * gelic_net_set_multi - sets multicast addresses and promisc flags
587  * @netdev: interface device structure
588  *
589  * gelic_net_set_multi configures multicast addresses as needed for the
590  * netdev interface. It also sets up multicast, allmulti and promisc
591  * flags appropriately
592  */
593 void gelic_net_set_multi(struct net_device *netdev)
594 {
595         struct gelic_card *card = netdev_card(netdev);
596         struct netdev_hw_addr *ha;
597         unsigned int i;
598         uint8_t *p;
599         u64 addr;
600         int status;
601
602         /* clear all multicast address */
603         status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
604                                                   0, 1);
605         if (status)
606                 dev_err(ctodev(card),
607                         "lv1_net_remove_multicast_address failed %d\n",
608                         status);
609         /* set broadcast address */
610         status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
611                                                GELIC_NET_BROADCAST_ADDR, 0);
612         if (status)
613                 dev_err(ctodev(card),
614                         "lv1_net_add_multicast_address failed, %d\n",
615                         status);
616
617         if ((netdev->flags & IFF_ALLMULTI) ||
618             (netdev_mc_count(netdev) > GELIC_NET_MC_COUNT_MAX)) {
619                 status = lv1_net_add_multicast_address(bus_id(card),
620                                                        dev_id(card),
621                                                        0, 1);
622                 if (status)
623                         dev_err(ctodev(card),
624                                 "lv1_net_add_multicast_address failed, %d\n",
625                                 status);
626                 return;
627         }
628
629         /* set multicast addresses */
630         netdev_for_each_mc_addr(ha, netdev) {
631                 addr = 0;
632                 p = ha->addr;
633                 for (i = 0; i < ETH_ALEN; i++) {
634                         addr <<= 8;
635                         addr |= *p++;
636                 }
637                 status = lv1_net_add_multicast_address(bus_id(card),
638                                                        dev_id(card),
639                                                        addr, 0);
640                 if (status)
641                         dev_err(ctodev(card),
642                                 "lv1_net_add_multicast_address failed, %d\n",
643                                 status);
644         }
645 }
646
647 /**
648  * gelic_net_stop - called upon ifconfig down
649  * @netdev: interface device structure
650  *
651  * always returns 0
652  */
653 int gelic_net_stop(struct net_device *netdev)
654 {
655         struct gelic_card *card;
656
657         pr_debug("%s: start\n", __func__);
658
659         netif_stop_queue(netdev);
660         netif_carrier_off(netdev);
661
662         card = netdev_card(netdev);
663         gelic_card_down(card);
664
665         pr_debug("%s: done\n", __func__);
666         return 0;
667 }
668
669 /**
670  * gelic_card_get_next_tx_descr - returns the next available tx descriptor
671  * @card: device structure to get descriptor from
672  *
673  * returns the address of the next descriptor, or NULL if not available.
674  */
675 static struct gelic_descr *
676 gelic_card_get_next_tx_descr(struct gelic_card *card)
677 {
678         if (!card->tx_chain.head)
679                 return NULL;
680         /*  see if the next descriptor is free */
681         if (card->tx_chain.tail != card->tx_chain.head->next &&
682             gelic_descr_get_status(card->tx_chain.head) ==
683             GELIC_DESCR_DMA_NOT_IN_USE)
684                 return card->tx_chain.head;
685         else
686                 return NULL;
687
688 }
689
690 /**
691  * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field
692  * @descr: descriptor structure to fill out
693  * @skb: packet to consider
694  *
695  * fills out the command and status field of the descriptor structure,
696  * depending on hardware checksum settings. This function assumes a wmb()
697  * has executed before.
698  */
699 static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr,
700                                        struct sk_buff *skb)
701 {
702         if (skb->ip_summed != CHECKSUM_PARTIAL)
703                 descr->dmac_cmd_status =
704                         cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
705                                     GELIC_DESCR_TX_DMA_FRAME_TAIL);
706         else {
707                 /* is packet ip?
708                  * if yes: tcp? udp? */
709                 if (skb->protocol == htons(ETH_P_IP)) {
710                         if (ip_hdr(skb)->protocol == IPPROTO_TCP)
711                                 descr->dmac_cmd_status =
712                                 cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM |
713                                             GELIC_DESCR_TX_DMA_FRAME_TAIL);
714
715                         else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
716                                 descr->dmac_cmd_status =
717                                 cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM |
718                                             GELIC_DESCR_TX_DMA_FRAME_TAIL);
719                         else    /*
720                                  * the stack should checksum non-tcp and non-udp
721                                  * packets on his own: NETIF_F_IP_CSUM
722                                  */
723                                 descr->dmac_cmd_status =
724                                 cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
725                                             GELIC_DESCR_TX_DMA_FRAME_TAIL);
726                 }
727         }
728 }
729
730 static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
731                                                  unsigned short tag)
732 {
733         struct vlan_ethhdr *veth;
734         static unsigned int c;
735
736         if (skb_headroom(skb) < VLAN_HLEN) {
737                 struct sk_buff *sk_tmp = skb;
738                 pr_debug("%s: hd=%d c=%ud\n", __func__, skb_headroom(skb), c);
739                 skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN);
740                 if (!skb)
741                         return NULL;
742                 dev_kfree_skb_any(sk_tmp);
743         }
744         veth = skb_push(skb, VLAN_HLEN);
745
746         /* Move the mac addresses to the top of buffer */
747         memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN);
748
749         veth->h_vlan_proto = cpu_to_be16(ETH_P_8021Q);
750         veth->h_vlan_TCI = htons(tag);
751
752         return skb;
753 }
754
755 /**
756  * gelic_descr_prepare_tx - setup a descriptor for sending packets
757  * @card: card structure
758  * @descr: descriptor structure
759  * @skb: packet to use
760  *
761  * returns 0 on success, <0 on failure.
762  *
763  */
764 static int gelic_descr_prepare_tx(struct gelic_card *card,
765                                   struct gelic_descr *descr,
766                                   struct sk_buff *skb)
767 {
768         dma_addr_t buf;
769
770         if (card->vlan_required) {
771                 struct sk_buff *skb_tmp;
772                 enum gelic_port_type type;
773
774                 type = netdev_port(skb->dev)->type;
775                 skb_tmp = gelic_put_vlan_tag(skb,
776                                              card->vlan[type].tx);
777                 if (!skb_tmp)
778                         return -ENOMEM;
779                 skb = skb_tmp;
780         }
781
782         buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE);
783
784         if (!buf) {
785                 dev_err(ctodev(card),
786                         "dma map 2 failed (%p, %i). Dropping packet\n",
787                         skb->data, skb->len);
788                 return -ENOMEM;
789         }
790
791         descr->buf_addr = cpu_to_be32(buf);
792         descr->buf_size = cpu_to_be32(skb->len);
793         descr->skb = skb;
794         descr->data_status = 0;
795         descr->next_descr_addr = 0; /* terminate hw descr */
796         gelic_descr_set_tx_cmdstat(descr, skb);
797
798         /* bump free descriptor pointer */
799         card->tx_chain.head = descr->next;
800         return 0;
801 }
802
803 /**
804  * gelic_card_kick_txdma - enables TX DMA processing
805  * @card: card structure
806  * @descr: descriptor address to enable TX processing at
807  *
808  */
809 static int gelic_card_kick_txdma(struct gelic_card *card,
810                                  struct gelic_descr *descr)
811 {
812         int status = 0;
813
814         if (card->tx_dma_progress)
815                 return 0;
816
817         if (gelic_descr_get_status(descr) == GELIC_DESCR_DMA_CARDOWNED) {
818                 card->tx_dma_progress = 1;
819                 status = lv1_net_start_tx_dma(bus_id(card), dev_id(card),
820                                               descr->bus_addr, 0);
821                 if (status) {
822                         card->tx_dma_progress = 0;
823                         dev_info(ctodev(card), "lv1_net_start_txdma failed," \
824                                  "status=%d\n", status);
825                 }
826         }
827         return status;
828 }
829
830 /**
831  * gelic_net_xmit - transmits a frame over the device
832  * @skb: packet to send out
833  * @netdev: interface device structure
834  *
835  * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
836  */
837 netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
838 {
839         struct gelic_card *card = netdev_card(netdev);
840         struct gelic_descr *descr;
841         int result;
842         unsigned long flags;
843
844         spin_lock_irqsave(&card->tx_lock, flags);
845
846         gelic_card_release_tx_chain(card, 0);
847
848         descr = gelic_card_get_next_tx_descr(card);
849         if (!descr) {
850                 /*
851                  * no more descriptors free
852                  */
853                 gelic_card_stop_queues(card);
854                 spin_unlock_irqrestore(&card->tx_lock, flags);
855                 return NETDEV_TX_BUSY;
856         }
857
858         result = gelic_descr_prepare_tx(card, descr, skb);
859         if (result) {
860                 /*
861                  * DMA map failed.  As chances are that failure
862                  * would continue, just release skb and return
863                  */
864                 netdev->stats.tx_dropped++;
865                 dev_kfree_skb_any(skb);
866                 spin_unlock_irqrestore(&card->tx_lock, flags);
867                 return NETDEV_TX_OK;
868         }
869         /*
870          * link this prepared descriptor to previous one
871          * to achieve high performance
872          */
873         descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
874         /*
875          * as hardware descriptor is modified in the above lines,
876          * ensure that the hardware sees it
877          */
878         wmb();
879         if (gelic_card_kick_txdma(card, descr)) {
880                 /*
881                  * kick failed.
882                  * release descriptor which was just prepared
883                  */
884                 netdev->stats.tx_dropped++;
885                 /* don't trigger BUG_ON() in gelic_descr_release_tx */
886                 descr->data_status = cpu_to_be32(GELIC_DESCR_TX_TAIL);
887                 gelic_descr_release_tx(card, descr);
888                 /* reset head */
889                 card->tx_chain.head = descr;
890                 /* reset hw termination */
891                 descr->prev->next_descr_addr = 0;
892                 dev_info(ctodev(card), "%s: kick failure\n", __func__);
893         }
894
895         spin_unlock_irqrestore(&card->tx_lock, flags);
896         return NETDEV_TX_OK;
897 }
898
899 /**
900  * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
901  * @descr: descriptor to process
902  * @card: card structure
903  * @netdev: net_device structure to be passed packet
904  *
905  * iommu-unmaps the skb, fills out skb structure and passes the data to the
906  * stack. The descriptor state is not changed.
907  */
908 static void gelic_net_pass_skb_up(struct gelic_descr *descr,
909                                   struct gelic_card *card,
910                                   struct net_device *netdev)
911
912 {
913         struct sk_buff *skb = descr->skb;
914         u32 data_status, data_error;
915
916         data_status = be32_to_cpu(descr->data_status);
917         data_error = be32_to_cpu(descr->data_error);
918         /* unmap skb buffer */
919         dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr),
920                          GELIC_NET_MAX_MTU,
921                          DMA_FROM_DEVICE);
922
923         skb_put(skb, be32_to_cpu(descr->valid_size)?
924                 be32_to_cpu(descr->valid_size) :
925                 be32_to_cpu(descr->result_size));
926         if (!descr->valid_size)
927                 dev_info(ctodev(card), "buffer full %x %x %x\n",
928                          be32_to_cpu(descr->result_size),
929                          be32_to_cpu(descr->buf_size),
930                          be32_to_cpu(descr->dmac_cmd_status));
931
932         descr->skb = NULL;
933         /*
934          * the card put 2 bytes vlan tag in front
935          * of the ethernet frame
936          */
937         skb_pull(skb, 2);
938         skb->protocol = eth_type_trans(skb, netdev);
939
940         /* checksum offload */
941         if (netdev->features & NETIF_F_RXCSUM) {
942                 if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) &&
943                     (!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK)))
944                         skb->ip_summed = CHECKSUM_UNNECESSARY;
945                 else
946                         skb_checksum_none_assert(skb);
947         } else
948                 skb_checksum_none_assert(skb);
949
950         /* update netdevice statistics */
951         netdev->stats.rx_packets++;
952         netdev->stats.rx_bytes += skb->len;
953
954         /* pass skb up to stack */
955         netif_receive_skb(skb);
956 }
957
958 /**
959  * gelic_card_decode_one_descr - processes an rx descriptor
960  * @card: card structure
961  *
962  * returns 1 if a packet has been sent to the stack, otherwise 0
963  *
964  * processes an rx descriptor by iommu-unmapping the data buffer and passing
965  * the packet up to the stack
966  */
967 static int gelic_card_decode_one_descr(struct gelic_card *card)
968 {
969         enum gelic_descr_dma_status status;
970         struct gelic_descr_chain *chain = &card->rx_chain;
971         struct gelic_descr *descr = chain->head;
972         struct net_device *netdev = NULL;
973         int dmac_chain_ended;
974
975         status = gelic_descr_get_status(descr);
976
977         if (status == GELIC_DESCR_DMA_CARDOWNED)
978                 return 0;
979
980         if (status == GELIC_DESCR_DMA_NOT_IN_USE) {
981                 dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
982                 return 0;
983         }
984
985         /* netdevice select */
986         if (card->vlan_required) {
987                 unsigned int i;
988                 u16 vid;
989                 vid = *(u16 *)(descr->skb->data) & VLAN_VID_MASK;
990                 for (i = 0; i < GELIC_PORT_MAX; i++) {
991                         if (card->vlan[i].rx == vid) {
992                                 netdev = card->netdev[i];
993                                 break;
994                         }
995                 }
996                 if (GELIC_PORT_MAX <= i) {
997                         pr_info("%s: unknown packet vid=%x\n", __func__, vid);
998                         goto refill;
999                 }
1000         } else
1001                 netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1002
1003         if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) ||
1004             (status == GELIC_DESCR_DMA_PROTECTION_ERROR) ||
1005             (status == GELIC_DESCR_DMA_FORCE_END)) {
1006                 dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
1007                          status);
1008                 netdev->stats.rx_dropped++;
1009                 goto refill;
1010         }
1011
1012         if (status == GELIC_DESCR_DMA_BUFFER_FULL) {
1013                 /*
1014                  * Buffer full would occur if and only if
1015                  * the frame length was longer than the size of this
1016                  * descriptor's buffer.  If the frame length was equal
1017                  * to or shorter than buffer'size, FRAME_END condition
1018                  * would occur.
1019                  * Anyway this frame was longer than the MTU,
1020                  * just drop it.
1021                  */
1022                 dev_info(ctodev(card), "overlength frame\n");
1023                 goto refill;
1024         }
1025         /*
1026          * descriptors any other than FRAME_END here should
1027          * be treated as error.
1028          */
1029         if (status != GELIC_DESCR_DMA_FRAME_END) {
1030                 dev_dbg(ctodev(card), "RX descriptor with state %x\n",
1031                         status);
1032                 goto refill;
1033         }
1034
1035         /* ok, we've got a packet in descr */
1036         gelic_net_pass_skb_up(descr, card, netdev);
1037 refill:
1038
1039         /* is the current descriptor terminated with next_descr == NULL? */
1040         dmac_chain_ended =
1041                 be32_to_cpu(descr->dmac_cmd_status) &
1042                 GELIC_DESCR_RX_DMA_CHAIN_END;
1043         /*
1044          * So that always DMAC can see the end
1045          * of the descriptor chain to avoid
1046          * from unwanted DMAC overrun.
1047          */
1048         descr->next_descr_addr = 0;
1049
1050         /* change the descriptor state: */
1051         gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
1052
1053         /*
1054          * this call can fail, but for now, just leave this
1055          * descriptor without skb
1056          */
1057         gelic_descr_prepare_rx(card, descr);
1058
1059         chain->tail = descr;
1060         chain->head = descr->next;
1061
1062         /*
1063          * Set this descriptor the end of the chain.
1064          */
1065         descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
1066
1067         /*
1068          * If dmac chain was met, DMAC stopped.
1069          * thus re-enable it
1070          */
1071
1072         if (dmac_chain_ended)
1073                 gelic_card_enable_rxdmac(card);
1074
1075         return 1;
1076 }
1077
1078 /**
1079  * gelic_net_poll - NAPI poll function called by the stack to return packets
1080  * @napi: napi structure
1081  * @budget: number of packets we can pass to the stack at most
1082  *
1083  * returns the number of the processed packets
1084  *
1085  */
1086 static int gelic_net_poll(struct napi_struct *napi, int budget)
1087 {
1088         struct gelic_card *card = container_of(napi, struct gelic_card, napi);
1089         int packets_done = 0;
1090
1091         while (packets_done < budget) {
1092                 if (!gelic_card_decode_one_descr(card))
1093                         break;
1094
1095                 packets_done++;
1096         }
1097
1098         if (packets_done < budget) {
1099                 napi_complete_done(napi, packets_done);
1100                 gelic_card_rx_irq_on(card);
1101         }
1102         return packets_done;
1103 }
1104
1105 /**
1106  * gelic_card_interrupt - event handler for gelic_net
1107  */
1108 static irqreturn_t gelic_card_interrupt(int irq, void *ptr)
1109 {
1110         unsigned long flags;
1111         struct gelic_card *card = ptr;
1112         u64 status;
1113
1114         status = card->irq_status;
1115
1116         if (!status)
1117                 return IRQ_NONE;
1118
1119         status &= card->irq_mask;
1120
1121         if (status & GELIC_CARD_RXINT) {
1122                 gelic_card_rx_irq_off(card);
1123                 napi_schedule(&card->napi);
1124         }
1125
1126         if (status & GELIC_CARD_TXINT) {
1127                 spin_lock_irqsave(&card->tx_lock, flags);
1128                 card->tx_dma_progress = 0;
1129                 gelic_card_release_tx_chain(card, 0);
1130                 /* kick outstanding tx descriptor if any */
1131                 gelic_card_kick_txdma(card, card->tx_chain.tail);
1132                 spin_unlock_irqrestore(&card->tx_lock, flags);
1133         }
1134
1135         /* ether port status changed */
1136         if (status & GELIC_CARD_PORT_STATUS_CHANGED)
1137                 gelic_card_get_ether_port_status(card, 1);
1138
1139 #ifdef CONFIG_GELIC_WIRELESS
1140         if (status & (GELIC_CARD_WLAN_EVENT_RECEIVED |
1141                       GELIC_CARD_WLAN_COMMAND_COMPLETED))
1142                 gelic_wl_interrupt(card->netdev[GELIC_PORT_WIRELESS], status);
1143 #endif
1144
1145         return IRQ_HANDLED;
1146 }
1147
1148 #ifdef CONFIG_NET_POLL_CONTROLLER
1149 /**
1150  * gelic_net_poll_controller - artificial interrupt for netconsole etc.
1151  * @netdev: interface device structure
1152  *
1153  * see Documentation/networking/netconsole.txt
1154  */
1155 void gelic_net_poll_controller(struct net_device *netdev)
1156 {
1157         struct gelic_card *card = netdev_card(netdev);
1158
1159         gelic_card_set_irq_mask(card, 0);
1160         gelic_card_interrupt(netdev->irq, netdev);
1161         gelic_card_set_irq_mask(card, card->irq_mask);
1162 }
1163 #endif /* CONFIG_NET_POLL_CONTROLLER */
1164
1165 /**
1166  * gelic_net_open - called upon ifconfig up
1167  * @netdev: interface device structure
1168  *
1169  * returns 0 on success, <0 on failure
1170  *
1171  * gelic_net_open allocates all the descriptors and memory needed for
1172  * operation, sets up multicast list and enables interrupts
1173  */
1174 int gelic_net_open(struct net_device *netdev)
1175 {
1176         struct gelic_card *card = netdev_card(netdev);
1177
1178         dev_dbg(ctodev(card), " -> %s %p\n", __func__, netdev);
1179
1180         gelic_card_up(card);
1181
1182         netif_start_queue(netdev);
1183         gelic_card_get_ether_port_status(card, 1);
1184
1185         dev_dbg(ctodev(card), " <- %s\n", __func__);
1186         return 0;
1187 }
1188
1189 void gelic_net_get_drvinfo(struct net_device *netdev,
1190                            struct ethtool_drvinfo *info)
1191 {
1192         strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1193         strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1194 }
1195
1196 static int gelic_ether_get_link_ksettings(struct net_device *netdev,
1197                                           struct ethtool_link_ksettings *cmd)
1198 {
1199         struct gelic_card *card = netdev_card(netdev);
1200         u32 supported, advertising;
1201
1202         gelic_card_get_ether_port_status(card, 0);
1203
1204         if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX)
1205                 cmd->base.duplex = DUPLEX_FULL;
1206         else
1207                 cmd->base.duplex = DUPLEX_HALF;
1208
1209         switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
1210         case GELIC_LV1_ETHER_SPEED_10:
1211                 cmd->base.speed = SPEED_10;
1212                 break;
1213         case GELIC_LV1_ETHER_SPEED_100:
1214                 cmd->base.speed = SPEED_100;
1215                 break;
1216         case GELIC_LV1_ETHER_SPEED_1000:
1217                 cmd->base.speed = SPEED_1000;
1218                 break;
1219         default:
1220                 pr_info("%s: speed unknown\n", __func__);
1221                 cmd->base.speed = SPEED_10;
1222                 break;
1223         }
1224
1225         supported = SUPPORTED_TP | SUPPORTED_Autoneg |
1226                         SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
1227                         SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
1228                         SUPPORTED_1000baseT_Full;
1229         advertising = supported;
1230         if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) {
1231                 cmd->base.autoneg = AUTONEG_ENABLE;
1232         } else {
1233                 cmd->base.autoneg = AUTONEG_DISABLE;
1234                 advertising &= ~ADVERTISED_Autoneg;
1235         }
1236         cmd->base.port = PORT_TP;
1237
1238         ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
1239                                                 supported);
1240         ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
1241                                                 advertising);
1242
1243         return 0;
1244 }
1245
1246 static int
1247 gelic_ether_set_link_ksettings(struct net_device *netdev,
1248                                const struct ethtool_link_ksettings *cmd)
1249 {
1250         struct gelic_card *card = netdev_card(netdev);
1251         u64 mode;
1252         int ret;
1253
1254         if (cmd->base.autoneg == AUTONEG_ENABLE) {
1255                 mode = GELIC_LV1_ETHER_AUTO_NEG;
1256         } else {
1257                 switch (cmd->base.speed) {
1258                 case SPEED_10:
1259                         mode = GELIC_LV1_ETHER_SPEED_10;
1260                         break;
1261                 case SPEED_100:
1262                         mode = GELIC_LV1_ETHER_SPEED_100;
1263                         break;
1264                 case SPEED_1000:
1265                         mode = GELIC_LV1_ETHER_SPEED_1000;
1266                         break;
1267                 default:
1268                         return -EINVAL;
1269                 }
1270                 if (cmd->base.duplex == DUPLEX_FULL) {
1271                         mode |= GELIC_LV1_ETHER_FULL_DUPLEX;
1272                 } else if (cmd->base.speed == SPEED_1000) {
1273                         pr_info("1000 half duplex is not supported.\n");
1274                         return -EINVAL;
1275                 }
1276         }
1277
1278         ret = gelic_card_set_link_mode(card, mode);
1279
1280         if (ret)
1281                 return ret;
1282
1283         return 0;
1284 }
1285
1286 static void gelic_net_get_wol(struct net_device *netdev,
1287                               struct ethtool_wolinfo *wol)
1288 {
1289         if (0 <= ps3_compare_firmware_version(2, 2, 0))
1290                 wol->supported = WAKE_MAGIC;
1291         else
1292                 wol->supported = 0;
1293
1294         wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
1295         memset(&wol->sopass, 0, sizeof(wol->sopass));
1296 }
1297 static int gelic_net_set_wol(struct net_device *netdev,
1298                              struct ethtool_wolinfo *wol)
1299 {
1300         int status;
1301         struct gelic_card *card;
1302         u64 v1, v2;
1303
1304         if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
1305             !capable(CAP_NET_ADMIN))
1306                 return -EPERM;
1307
1308         if (wol->wolopts & ~WAKE_MAGIC)
1309                 return -EINVAL;
1310
1311         card = netdev_card(netdev);
1312         if (wol->wolopts & WAKE_MAGIC) {
1313                 status = lv1_net_control(bus_id(card), dev_id(card),
1314                                          GELIC_LV1_SET_WOL,
1315                                          GELIC_LV1_WOL_MAGIC_PACKET,
1316                                          0, GELIC_LV1_WOL_MP_ENABLE,
1317                                          &v1, &v2);
1318                 if (status) {
1319                         pr_info("%s: enabling WOL failed %d\n", __func__,
1320                                 status);
1321                         status = -EIO;
1322                         goto done;
1323                 }
1324                 status = lv1_net_control(bus_id(card), dev_id(card),
1325                                          GELIC_LV1_SET_WOL,
1326                                          GELIC_LV1_WOL_ADD_MATCH_ADDR,
1327                                          0, GELIC_LV1_WOL_MATCH_ALL,
1328                                          &v1, &v2);
1329                 if (!status)
1330                         ps3_sys_manager_set_wol(1);
1331                 else {
1332                         pr_info("%s: enabling WOL filter failed %d\n",
1333                                 __func__, status);
1334                         status = -EIO;
1335                 }
1336         } else {
1337                 status = lv1_net_control(bus_id(card), dev_id(card),
1338                                          GELIC_LV1_SET_WOL,
1339                                          GELIC_LV1_WOL_MAGIC_PACKET,
1340                                          0, GELIC_LV1_WOL_MP_DISABLE,
1341                                          &v1, &v2);
1342                 if (status) {
1343                         pr_info("%s: disabling WOL failed %d\n", __func__,
1344                                 status);
1345                         status = -EIO;
1346                         goto done;
1347                 }
1348                 status = lv1_net_control(bus_id(card), dev_id(card),
1349                                          GELIC_LV1_SET_WOL,
1350                                          GELIC_LV1_WOL_DELETE_MATCH_ADDR,
1351                                          0, GELIC_LV1_WOL_MATCH_ALL,
1352                                          &v1, &v2);
1353                 if (!status)
1354                         ps3_sys_manager_set_wol(0);
1355                 else {
1356                         pr_info("%s: removing WOL filter failed %d\n",
1357                                 __func__, status);
1358                         status = -EIO;
1359                 }
1360         }
1361 done:
1362         return status;
1363 }
1364
1365 static const struct ethtool_ops gelic_ether_ethtool_ops = {
1366         .get_drvinfo    = gelic_net_get_drvinfo,
1367         .get_link       = ethtool_op_get_link,
1368         .get_wol        = gelic_net_get_wol,
1369         .set_wol        = gelic_net_set_wol,
1370         .get_link_ksettings = gelic_ether_get_link_ksettings,
1371         .set_link_ksettings = gelic_ether_set_link_ksettings,
1372 };
1373
1374 /**
1375  * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
1376  * function (to be called not under interrupt status)
1377  * @work: work is context of tx timout task
1378  *
1379  * called as task when tx hangs, resets interface (if interface is up)
1380  */
1381 static void gelic_net_tx_timeout_task(struct work_struct *work)
1382 {
1383         struct gelic_card *card =
1384                 container_of(work, struct gelic_card, tx_timeout_task);
1385         struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1386
1387         dev_info(ctodev(card), "%s:Timed out. Restarting...\n", __func__);
1388
1389         if (!(netdev->flags & IFF_UP))
1390                 goto out;
1391
1392         netif_device_detach(netdev);
1393         gelic_net_stop(netdev);
1394
1395         gelic_net_open(netdev);
1396         netif_device_attach(netdev);
1397
1398 out:
1399         atomic_dec(&card->tx_timeout_task_counter);
1400 }
1401
1402 /**
1403  * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
1404  * @netdev: interface device structure
1405  *
1406  * called, if tx hangs. Schedules a task that resets the interface
1407  */
1408 void gelic_net_tx_timeout(struct net_device *netdev)
1409 {
1410         struct gelic_card *card;
1411
1412         card = netdev_card(netdev);
1413         atomic_inc(&card->tx_timeout_task_counter);
1414         if (netdev->flags & IFF_UP)
1415                 schedule_work(&card->tx_timeout_task);
1416         else
1417                 atomic_dec(&card->tx_timeout_task_counter);
1418 }
1419
1420 static const struct net_device_ops gelic_netdevice_ops = {
1421         .ndo_open = gelic_net_open,
1422         .ndo_stop = gelic_net_stop,
1423         .ndo_start_xmit = gelic_net_xmit,
1424         .ndo_set_rx_mode = gelic_net_set_multi,
1425         .ndo_tx_timeout = gelic_net_tx_timeout,
1426         .ndo_set_mac_address = eth_mac_addr,
1427         .ndo_validate_addr = eth_validate_addr,
1428 #ifdef CONFIG_NET_POLL_CONTROLLER
1429         .ndo_poll_controller = gelic_net_poll_controller,
1430 #endif
1431 };
1432
1433 /**
1434  * gelic_ether_setup_netdev_ops - initialization of net_device operations
1435  * @netdev: net_device structure
1436  *
1437  * fills out function pointers in the net_device structure
1438  */
1439 static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
1440                                          struct napi_struct *napi)
1441 {
1442         netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
1443         /* NAPI */
1444         netif_napi_add(netdev, napi, gelic_net_poll, NAPI_POLL_WEIGHT);
1445         netdev->ethtool_ops = &gelic_ether_ethtool_ops;
1446         netdev->netdev_ops = &gelic_netdevice_ops;
1447 }
1448
1449 /**
1450  * gelic_ether_setup_netdev - initialization of net_device
1451  * @netdev: net_device structure
1452  * @card: card structure
1453  *
1454  * Returns 0 on success or <0 on failure
1455  *
1456  * gelic_ether_setup_netdev initializes the net_device structure
1457  * and register it.
1458  **/
1459 int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
1460 {
1461         int status;
1462         u64 v1, v2;
1463
1464         netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
1465
1466         netdev->features = NETIF_F_IP_CSUM;
1467         if (GELIC_CARD_RX_CSUM_DEFAULT)
1468                 netdev->features |= NETIF_F_RXCSUM;
1469
1470         status = lv1_net_control(bus_id(card), dev_id(card),
1471                                  GELIC_LV1_GET_MAC_ADDRESS,
1472                                  0, 0, 0, &v1, &v2);
1473         v1 <<= 16;
1474         if (status || !is_valid_ether_addr((u8 *)&v1)) {
1475                 dev_info(ctodev(card),
1476                          "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
1477                          __func__, status);
1478                 return -EINVAL;
1479         }
1480         memcpy(netdev->dev_addr, &v1, ETH_ALEN);
1481
1482         if (card->vlan_required) {
1483                 netdev->hard_header_len += VLAN_HLEN;
1484                 /*
1485                  * As vlan is internally used,
1486                  * we can not receive vlan packets
1487                  */
1488                 netdev->features |= NETIF_F_VLAN_CHALLENGED;
1489         }
1490
1491         /* MTU range: 64 - 1518 */
1492         netdev->min_mtu = GELIC_NET_MIN_MTU;
1493         netdev->max_mtu = GELIC_NET_MAX_MTU;
1494
1495         status = register_netdev(netdev);
1496         if (status) {
1497                 dev_err(ctodev(card), "%s:Couldn't register %s %d\n",
1498                         __func__, netdev->name, status);
1499                 return status;
1500         }
1501         dev_info(ctodev(card), "%s: MAC addr %pM\n",
1502                  netdev->name, netdev->dev_addr);
1503
1504         return 0;
1505 }
1506
1507 /**
1508  * gelic_alloc_card_net - allocates net_device and card structure
1509  *
1510  * returns the card structure or NULL in case of errors
1511  *
1512  * the card and net_device structures are linked to each other
1513  */
1514 #define GELIC_ALIGN (32)
1515 static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
1516 {
1517         struct gelic_card *card;
1518         struct gelic_port *port;
1519         void *p;
1520         size_t alloc_size;
1521         /*
1522          * gelic requires dma descriptor is 32 bytes aligned and
1523          * the hypervisor requires irq_status is 8 bytes aligned.
1524          */
1525         BUILD_BUG_ON(offsetof(struct gelic_card, irq_status) % 8);
1526         BUILD_BUG_ON(offsetof(struct gelic_card, descr) % 32);
1527         alloc_size =
1528                 sizeof(struct gelic_card) +
1529                 sizeof(struct gelic_descr) * GELIC_NET_RX_DESCRIPTORS +
1530                 sizeof(struct gelic_descr) * GELIC_NET_TX_DESCRIPTORS +
1531                 GELIC_ALIGN - 1;
1532
1533         p  = kzalloc(alloc_size, GFP_KERNEL);
1534         if (!p)
1535                 return NULL;
1536         card = PTR_ALIGN(p, GELIC_ALIGN);
1537         card->unalign = p;
1538
1539         /*
1540          * alloc netdev
1541          */
1542         *netdev = alloc_etherdev(sizeof(struct gelic_port));
1543         if (!*netdev) {
1544                 kfree(card->unalign);
1545                 return NULL;
1546         }
1547         port = netdev_priv(*netdev);
1548
1549         /* gelic_port */
1550         port->netdev = *netdev;
1551         port->card = card;
1552         port->type = GELIC_PORT_ETHERNET_0;
1553
1554         /* gelic_card */
1555         card->netdev[GELIC_PORT_ETHERNET_0] = *netdev;
1556
1557         INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
1558         init_waitqueue_head(&card->waitq);
1559         atomic_set(&card->tx_timeout_task_counter, 0);
1560         mutex_init(&card->updown_lock);
1561         atomic_set(&card->users, 0);
1562
1563         return card;
1564 }
1565
1566 static void gelic_card_get_vlan_info(struct gelic_card *card)
1567 {
1568         u64 v1, v2;
1569         int status;
1570         unsigned int i;
1571         struct {
1572                 int tx;
1573                 int rx;
1574         } vlan_id_ix[2] = {
1575                 [GELIC_PORT_ETHERNET_0] = {
1576                         .tx = GELIC_LV1_VLAN_TX_ETHERNET_0,
1577                         .rx = GELIC_LV1_VLAN_RX_ETHERNET_0
1578                 },
1579                 [GELIC_PORT_WIRELESS] = {
1580                         .tx = GELIC_LV1_VLAN_TX_WIRELESS,
1581                         .rx = GELIC_LV1_VLAN_RX_WIRELESS
1582                 }
1583         };
1584
1585         for (i = 0; i < ARRAY_SIZE(vlan_id_ix); i++) {
1586                 /* tx tag */
1587                 status = lv1_net_control(bus_id(card), dev_id(card),
1588                                          GELIC_LV1_GET_VLAN_ID,
1589                                          vlan_id_ix[i].tx,
1590                                          0, 0, &v1, &v2);
1591                 if (status || !v1) {
1592                         if (status != LV1_NO_ENTRY)
1593                                 dev_dbg(ctodev(card),
1594                                         "get vlan id for tx(%d) failed(%d)\n",
1595                                         vlan_id_ix[i].tx, status);
1596                         card->vlan[i].tx = 0;
1597                         card->vlan[i].rx = 0;
1598                         continue;
1599                 }
1600                 card->vlan[i].tx = (u16)v1;
1601
1602                 /* rx tag */
1603                 status = lv1_net_control(bus_id(card), dev_id(card),
1604                                          GELIC_LV1_GET_VLAN_ID,
1605                                          vlan_id_ix[i].rx,
1606                                          0, 0, &v1, &v2);
1607                 if (status || !v1) {
1608                         if (status != LV1_NO_ENTRY)
1609                                 dev_info(ctodev(card),
1610                                          "get vlan id for rx(%d) failed(%d)\n",
1611                                          vlan_id_ix[i].rx, status);
1612                         card->vlan[i].tx = 0;
1613                         card->vlan[i].rx = 0;
1614                         continue;
1615                 }
1616                 card->vlan[i].rx = (u16)v1;
1617
1618                 dev_dbg(ctodev(card), "vlan_id[%d] tx=%02x rx=%02x\n",
1619                         i, card->vlan[i].tx, card->vlan[i].rx);
1620         }
1621
1622         if (card->vlan[GELIC_PORT_ETHERNET_0].tx) {
1623                 BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx);
1624                 card->vlan_required = 1;
1625         } else
1626                 card->vlan_required = 0;
1627
1628         /* check wirelss capable firmware */
1629         if (ps3_compare_firmware_version(1, 6, 0) < 0) {
1630                 card->vlan[GELIC_PORT_WIRELESS].tx = 0;
1631                 card->vlan[GELIC_PORT_WIRELESS].rx = 0;
1632         }
1633
1634         dev_info(ctodev(card), "internal vlan %s\n",
1635                  card->vlan_required? "enabled" : "disabled");
1636 }
1637 /**
1638  * ps3_gelic_driver_probe - add a device to the control of this driver
1639  */
1640 static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
1641 {
1642         struct gelic_card *card;
1643         struct net_device *netdev;
1644         int result;
1645
1646         pr_debug("%s: called\n", __func__);
1647
1648         udbg_shutdown_ps3gelic();
1649
1650         result = ps3_open_hv_device(dev);
1651
1652         if (result) {
1653                 dev_dbg(&dev->core, "%s:ps3_open_hv_device failed\n",
1654                         __func__);
1655                 goto fail_open;
1656         }
1657
1658         result = ps3_dma_region_create(dev->d_region);
1659
1660         if (result) {
1661                 dev_dbg(&dev->core, "%s:ps3_dma_region_create failed(%d)\n",
1662                         __func__, result);
1663                 BUG_ON("check region type");
1664                 goto fail_dma_region;
1665         }
1666
1667         /* alloc card/netdevice */
1668         card = gelic_alloc_card_net(&netdev);
1669         if (!card) {
1670                 dev_info(&dev->core, "%s:gelic_net_alloc_card failed\n",
1671                          __func__);
1672                 result = -ENOMEM;
1673                 goto fail_alloc_card;
1674         }
1675         ps3_system_bus_set_drvdata(dev, card);
1676         card->dev = dev;
1677
1678         /* get internal vlan info */
1679         gelic_card_get_vlan_info(card);
1680
1681         card->link_mode = GELIC_LV1_ETHER_AUTO_NEG;
1682
1683         /* setup interrupt */
1684         result = lv1_net_set_interrupt_status_indicator(bus_id(card),
1685                                                         dev_id(card),
1686                 ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
1687                 0);
1688
1689         if (result) {
1690                 dev_dbg(&dev->core,
1691                         "%s:set_interrupt_status_indicator failed: %s\n",
1692                         __func__, ps3_result(result));
1693                 result = -EIO;
1694                 goto fail_status_indicator;
1695         }
1696
1697         result = ps3_sb_event_receive_port_setup(dev, PS3_BINDING_CPU_ANY,
1698                 &card->irq);
1699
1700         if (result) {
1701                 dev_info(ctodev(card),
1702                          "%s:gelic_net_open_device failed (%d)\n",
1703                          __func__, result);
1704                 result = -EPERM;
1705                 goto fail_alloc_irq;
1706         }
1707         result = request_irq(card->irq, gelic_card_interrupt,
1708                              0, netdev->name, card);
1709
1710         if (result) {
1711                 dev_info(ctodev(card), "%s:request_irq failed (%d)\n",
1712                         __func__, result);
1713                 goto fail_request_irq;
1714         }
1715
1716         /* setup card structure */
1717         card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
1718                 GELIC_CARD_PORT_STATUS_CHANGED;
1719
1720
1721         result = gelic_card_init_chain(card, &card->tx_chain,
1722                                        card->descr, GELIC_NET_TX_DESCRIPTORS);
1723         if (result)
1724                 goto fail_alloc_tx;
1725         result = gelic_card_init_chain(card, &card->rx_chain,
1726                                        card->descr + GELIC_NET_TX_DESCRIPTORS,
1727                                        GELIC_NET_RX_DESCRIPTORS);
1728         if (result)
1729                 goto fail_alloc_rx;
1730
1731         /* head of chain */
1732         card->tx_top = card->tx_chain.head;
1733         card->rx_top = card->rx_chain.head;
1734         dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
1735                 card->rx_top, card->tx_top, sizeof(struct gelic_descr),
1736                 GELIC_NET_RX_DESCRIPTORS);
1737         /* allocate rx skbs */
1738         result = gelic_card_alloc_rx_skbs(card);
1739         if (result)
1740                 goto fail_alloc_skbs;
1741
1742         spin_lock_init(&card->tx_lock);
1743         card->tx_dma_progress = 0;
1744
1745         /* setup net_device structure */
1746         netdev->irq = card->irq;
1747         SET_NETDEV_DEV(netdev, &card->dev->core);
1748         gelic_ether_setup_netdev_ops(netdev, &card->napi);
1749         result = gelic_net_setup_netdev(netdev, card);
1750         if (result) {
1751                 dev_dbg(&dev->core, "%s: setup_netdev failed %d\n",
1752                         __func__, result);
1753                 goto fail_setup_netdev;
1754         }
1755
1756 #ifdef CONFIG_GELIC_WIRELESS
1757         result = gelic_wl_driver_probe(card);
1758         if (result) {
1759                 dev_dbg(&dev->core, "%s: WL init failed\n", __func__);
1760                 goto fail_setup_netdev;
1761         }
1762 #endif
1763         pr_debug("%s: done\n", __func__);
1764         return 0;
1765
1766 fail_setup_netdev:
1767 fail_alloc_skbs:
1768         gelic_card_free_chain(card, card->rx_chain.head);
1769 fail_alloc_rx:
1770         gelic_card_free_chain(card, card->tx_chain.head);
1771 fail_alloc_tx:
1772         free_irq(card->irq, card);
1773         netdev->irq = 0;
1774 fail_request_irq:
1775         ps3_sb_event_receive_port_destroy(dev, card->irq);
1776 fail_alloc_irq:
1777         lv1_net_set_interrupt_status_indicator(bus_id(card),
1778                                                bus_id(card),
1779                                                0, 0);
1780 fail_status_indicator:
1781         ps3_system_bus_set_drvdata(dev, NULL);
1782         kfree(netdev_card(netdev)->unalign);
1783         free_netdev(netdev);
1784 fail_alloc_card:
1785         ps3_dma_region_free(dev->d_region);
1786 fail_dma_region:
1787         ps3_close_hv_device(dev);
1788 fail_open:
1789         return result;
1790 }
1791
1792 /**
1793  * ps3_gelic_driver_remove - remove a device from the control of this driver
1794  */
1795
1796 static int ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
1797 {
1798         struct gelic_card *card = ps3_system_bus_get_drvdata(dev);
1799         struct net_device *netdev0;
1800         pr_debug("%s: called\n", __func__);
1801
1802         /* set auto-negotiation */
1803         gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG);
1804
1805 #ifdef CONFIG_GELIC_WIRELESS
1806         gelic_wl_driver_remove(card);
1807 #endif
1808         /* stop interrupt */
1809         gelic_card_set_irq_mask(card, 0);
1810
1811         /* turn off DMA, force end */
1812         gelic_card_disable_rxdmac(card);
1813         gelic_card_disable_txdmac(card);
1814
1815         /* release chains */
1816         gelic_card_release_tx_chain(card, 1);
1817         gelic_card_release_rx_chain(card);
1818
1819         gelic_card_free_chain(card, card->tx_top);
1820         gelic_card_free_chain(card, card->rx_top);
1821
1822         netdev0 = card->netdev[GELIC_PORT_ETHERNET_0];
1823         /* disconnect event port */
1824         free_irq(card->irq, card);
1825         netdev0->irq = 0;
1826         ps3_sb_event_receive_port_destroy(card->dev, card->irq);
1827
1828         wait_event(card->waitq,
1829                    atomic_read(&card->tx_timeout_task_counter) == 0);
1830
1831         lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
1832                                                0 , 0);
1833
1834         unregister_netdev(netdev0);
1835         kfree(netdev_card(netdev0)->unalign);
1836         free_netdev(netdev0);
1837
1838         ps3_system_bus_set_drvdata(dev, NULL);
1839
1840         ps3_dma_region_free(dev->d_region);
1841
1842         ps3_close_hv_device(dev);
1843
1844         pr_debug("%s: done\n", __func__);
1845         return 0;
1846 }
1847
1848 static struct ps3_system_bus_driver ps3_gelic_driver = {
1849         .match_id = PS3_MATCH_ID_GELIC,
1850         .probe = ps3_gelic_driver_probe,
1851         .remove = ps3_gelic_driver_remove,
1852         .shutdown = ps3_gelic_driver_remove,
1853         .core.name = "ps3_gelic_driver",
1854         .core.owner = THIS_MODULE,
1855 };
1856
1857 static int __init ps3_gelic_driver_init (void)
1858 {
1859         return firmware_has_feature(FW_FEATURE_PS3_LV1)
1860                 ? ps3_system_bus_driver_register(&ps3_gelic_driver)
1861                 : -ENODEV;
1862 }
1863
1864 static void __exit ps3_gelic_driver_exit (void)
1865 {
1866         ps3_system_bus_driver_unregister(&ps3_gelic_driver);
1867 }
1868
1869 module_init(ps3_gelic_driver_init);
1870 module_exit(ps3_gelic_driver_exit);
1871
1872 MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
1873