drivers/net/ethernet/amd/amd8111e.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 /* Advanced  Micro Devices Inc. AMD8111E Linux Network Driver
   4  * Copyright (C) 2004 Advanced Micro Devices
   5  *
   6  * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ]
   7  * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c]
   8  * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ]
   9  * Derived from the lance driver written 1993,1994,1995 by Donald Becker.
  10  * Copyright 1993 United States Government as represented by the
  11  *      Director, National Security Agency.[ pcnet32.c ]
  12  * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ]
  13  * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
  14  *
  15
  16 Module Name:
  17
  18         amd8111e.c
  19
  20 Abstract:
  21
  22          AMD8111 based 10/100 Ethernet Controller Driver.
  23
  24 Environment:
  25
  26         Kernel Mode
  27
  28 Revision History:
  29         3.0.0
  30            Initial Revision.
  31         3.0.1
  32          1. Dynamic interrupt coalescing.
  33          2. Removed prev_stats.
  34          3. MII support.
  35          4. Dynamic IPG support
  36         3.0.2  05/29/2003
  37          1. Bug fix: Fixed failure to send jumbo packets larger than 4k.
  38          2. Bug fix: Fixed VLAN support failure.
  39          3. Bug fix: Fixed receive interrupt coalescing bug.
  40          4. Dynamic IPG support is disabled by default.
  41         3.0.3 06/05/2003
  42          1. Bug fix: Fixed failure to close the interface if SMP is enabled.
  43         3.0.4 12/09/2003
  44          1. Added set_mac_address routine for bonding driver support.
  45          2. Tested the driver for bonding support
  46          3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth
  47             indicated to the h/w.
  48          4. Modified amd8111e_rx() routine to receive all the received packets
  49             in the first interrupt.
  50          5. Bug fix: Corrected  rx_errors  reported in get_stats() function.
  51         3.0.5 03/22/2004
  52          1. Added NAPI support
  53
  54 */
  55
  56
  57 #include <linux/module.h>
  58 #include <linux/kernel.h>
  59 #include <linux/types.h>
  60 #include <linux/compiler.h>
  61 #include <linux/delay.h>
  62 #include <linux/interrupt.h>
  63 #include <linux/ioport.h>
  64 #include <linux/pci.h>
  65 #include <linux/netdevice.h>
  66 #include <linux/etherdevice.h>
  67 #include <linux/skbuff.h>
  68 #include <linux/ethtool.h>
  69 #include <linux/mii.h>
  70 #include <linux/if_vlan.h>
  71 #include <linux/ctype.h>
  72 #include <linux/crc32.h>
  73 #include <linux/dma-mapping.h>
  74
  75 #include <asm/io.h>
  76 #include <asm/byteorder.h>
  77 #include <linux/uaccess.h>
  78
  79 #if IS_ENABLED(CONFIG_VLAN_8021Q)
  80 #define AMD8111E_VLAN_TAG_USED 1
  81 #else
  82 #define AMD8111E_VLAN_TAG_USED 0
  83 #endif
  84
  85 #include "amd8111e.h"
  86 #define MODULE_NAME     "amd8111e"
  87 #define MODULE_VERS     "3.0.7"
  88 MODULE_AUTHOR("Advanced Micro Devices, Inc.");
  89 MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS);
  90 MODULE_LICENSE("GPL");
  91 module_param_array(speed_duplex, int, NULL, 0);
  92 MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
  93 module_param_array(coalesce, bool, NULL, 0);
  94 MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
  95 module_param_array(dynamic_ipg, bool, NULL, 0);
  96 MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
  97
  98 /* This function will read the PHY registers. */
  99 static int amd8111e_read_phy(struct amd8111e_priv *lp,
 100                              int phy_id, int reg, u32 *val)
 101 {
 102         void __iomem *mmio = lp->mmio;
 103         unsigned int reg_val;
 104         unsigned int repeat= REPEAT_CNT;
 105
 106         reg_val = readl(mmio + PHY_ACCESS);
 107         while (reg_val & PHY_CMD_ACTIVE)
 108                 reg_val = readl( mmio + PHY_ACCESS );
 109
 110         writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) |
 111                            ((reg & 0x1f) << 16),  mmio +PHY_ACCESS);
 112         do{
 113                 reg_val = readl(mmio + PHY_ACCESS);
 114                 udelay(30);  /* It takes 30 us to read/write data */
 115         } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
 116         if(reg_val & PHY_RD_ERR)
 117                 goto err_phy_read;
 118
 119         *val = reg_val & 0xffff;
 120         return 0;
 121 err_phy_read:
 122         *val = 0;
 123         return -EINVAL;
 124
 125 }
 126
 127 /* This function will write into PHY registers. */
 128 static int amd8111e_write_phy(struct amd8111e_priv *lp,
 129                               int phy_id, int reg, u32 val)
 130 {
 131         unsigned int repeat = REPEAT_CNT;
 132         void __iomem *mmio = lp->mmio;
 133         unsigned int reg_val;
 134
 135         reg_val = readl(mmio + PHY_ACCESS);
 136         while (reg_val & PHY_CMD_ACTIVE)
 137                 reg_val = readl( mmio + PHY_ACCESS );
 138
 139         writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) |
 140                            ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS);
 141
 142         do{
 143                 reg_val = readl(mmio + PHY_ACCESS);
 144                 udelay(30);  /* It takes 30 us to read/write the data */
 145         } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
 146
 147         if(reg_val & PHY_RD_ERR)
 148                 goto err_phy_write;
 149
 150         return 0;
 151
 152 err_phy_write:
 153         return -EINVAL;
 154
 155 }
 156
 157 /* This is the mii register read function provided to the mii interface. */
 158 static int amd8111e_mdio_read(struct net_device *dev, int phy_id, int reg_num)
 159 {
 160         struct amd8111e_priv *lp = netdev_priv(dev);
 161         unsigned int reg_val;
 162
 163         amd8111e_read_phy(lp,phy_id,reg_num,&reg_val);
 164         return reg_val;
 165
 166 }
 167
 168 /* This is the mii register write function provided to the mii interface. */
 169 static void amd8111e_mdio_write(struct net_device *dev,
 170                                 int phy_id, int reg_num, int val)
 171 {
 172         struct amd8111e_priv *lp = netdev_priv(dev);
 173
 174         amd8111e_write_phy(lp, phy_id, reg_num, val);
 175 }
 176
 177 /* This function will set PHY speed. During initialization sets
 178  * the original speed to 100 full
 179  */
 180 static void amd8111e_set_ext_phy(struct net_device *dev)
 181 {
 182         struct amd8111e_priv *lp = netdev_priv(dev);
 183         u32 bmcr,advert,tmp;
 184
 185         /* Determine mii register values to set the speed */
 186         advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
 187         tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 188         switch (lp->ext_phy_option){
 189
 190                 default:
 191                 case SPEED_AUTONEG: /* advertise all values */
 192                         tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL|
 193                                 ADVERTISE_100HALF|ADVERTISE_100FULL) ;
 194                         break;
 195                 case SPEED10_HALF:
 196                         tmp |= ADVERTISE_10HALF;
 197                         break;
 198                 case SPEED10_FULL:
 199                         tmp |= ADVERTISE_10FULL;
 200                         break;
 201                 case SPEED100_HALF:
 202                         tmp |= ADVERTISE_100HALF;
 203                         break;
 204                 case SPEED100_FULL:
 205                         tmp |= ADVERTISE_100FULL;
 206                         break;
 207         }
 208
 209         if(advert != tmp)
 210                 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp);
 211         /* Restart auto negotiation */
 212         bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR);
 213         bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
 214         amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr);
 215
 216 }
 217
 218 /* This function will unmap skb->data space and will free
 219  * all transmit and receive skbuffs.
 220  */
 221 static int amd8111e_free_skbs(struct net_device *dev)
 222 {
 223         struct amd8111e_priv *lp = netdev_priv(dev);
 224         struct sk_buff *rx_skbuff;
 225         int i;
 226
 227         /* Freeing transmit skbs */
 228         for(i = 0; i < NUM_TX_BUFFERS; i++){
 229                 if(lp->tx_skbuff[i]){
 230                         pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i],                                        lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE);
 231                         dev_kfree_skb (lp->tx_skbuff[i]);
 232                         lp->tx_skbuff[i] = NULL;
 233                         lp->tx_dma_addr[i] = 0;
 234                 }
 235         }
 236         /* Freeing previously allocated receive buffers */
 237         for (i = 0; i < NUM_RX_BUFFERS; i++){
 238                 rx_skbuff = lp->rx_skbuff[i];
 239                 if(rx_skbuff != NULL){
 240                         pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i],
 241                                   lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE);
 242                         dev_kfree_skb(lp->rx_skbuff[i]);
 243                         lp->rx_skbuff[i] = NULL;
 244                         lp->rx_dma_addr[i] = 0;
 245                 }
 246         }
 247
 248         return 0;
 249 }
 250
 251 /* This will set the receive buffer length corresponding
 252  * to the mtu size of networkinterface.
 253  */
 254 static inline void amd8111e_set_rx_buff_len(struct net_device *dev)
 255 {
 256         struct amd8111e_priv *lp = netdev_priv(dev);
 257         unsigned int mtu = dev->mtu;
 258
 259         if (mtu > ETH_DATA_LEN){
 260                 /* MTU + ethernet header + FCS
 261                  * + optional VLAN tag + skb reserve space 2
 262                  */
 263                 lp->rx_buff_len = mtu + ETH_HLEN + 10;
 264                 lp->options |= OPTION_JUMBO_ENABLE;
 265         } else{
 266                 lp->rx_buff_len = PKT_BUFF_SZ;
 267                 lp->options &= ~OPTION_JUMBO_ENABLE;
 268         }
 269 }
 270
 271 /* This function will free all the previously allocated buffers,
 272  * determine new receive buffer length  and will allocate new receive buffers.
 273  * This function also allocates and initializes both the transmitter
 274  * and receive hardware descriptors.
 275  */
 276 static int amd8111e_init_ring(struct net_device *dev)
 277 {
 278         struct amd8111e_priv *lp = netdev_priv(dev);
 279         int i;
 280
 281         lp->rx_idx = lp->tx_idx = 0;
 282         lp->tx_complete_idx = 0;
 283         lp->tx_ring_idx = 0;
 284
 285
 286         if(lp->opened)
 287                 /* Free previously allocated transmit and receive skbs */
 288                 amd8111e_free_skbs(dev);
 289
 290         else{
 291                  /* allocate the tx and rx descriptors */
 292                 if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
 293                         sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
 294                         &lp->tx_ring_dma_addr)) == NULL)
 295
 296                         goto err_no_mem;
 297
 298                 if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
 299                         sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
 300                         &lp->rx_ring_dma_addr)) == NULL)
 301
 302                         goto err_free_tx_ring;
 303
 304         }
 305         /* Set new receive buff size */
 306         amd8111e_set_rx_buff_len(dev);
 307
 308         /* Allocating receive  skbs */
 309         for (i = 0; i < NUM_RX_BUFFERS; i++) {
 310
 311                 lp->rx_skbuff[i] = netdev_alloc_skb(dev, lp->rx_buff_len);
 312                 if (!lp->rx_skbuff[i]) {
 313                                 /* Release previos allocated skbs */
 314                                 for(--i; i >= 0 ;i--)
 315                                         dev_kfree_skb(lp->rx_skbuff[i]);
 316                                 goto err_free_rx_ring;
 317                 }
 318                 skb_reserve(lp->rx_skbuff[i],2);
 319         }
 320         /* Initilaizing receive descriptors */
 321         for (i = 0; i < NUM_RX_BUFFERS; i++) {
 322                 lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev,
 323                         lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
 324
 325                 lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]);
 326                 lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2);
 327                 wmb();
 328                 lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT);
 329         }
 330
 331         /* Initializing transmit descriptors */
 332         for (i = 0; i < NUM_TX_RING_DR; i++) {
 333                 lp->tx_ring[i].buff_phy_addr = 0;
 334                 lp->tx_ring[i].tx_flags = 0;
 335                 lp->tx_ring[i].buff_count = 0;
 336         }
 337
 338         return 0;
 339
 340 err_free_rx_ring:
 341
 342         pci_free_consistent(lp->pci_dev,
 343                 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring,
 344                 lp->rx_ring_dma_addr);
 345
 346 err_free_tx_ring:
 347
 348         pci_free_consistent(lp->pci_dev,
 349                  sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring,
 350                  lp->tx_ring_dma_addr);
 351
 352 err_no_mem:
 353         return -ENOMEM;
 354 }
 355
 356 /* This function will set the interrupt coalescing according
 357  * to the input arguments
 358  */
 359 static int amd8111e_set_coalesce(struct net_device *dev, enum coal_mode cmod)
 360 {
 361         unsigned int timeout;
 362         unsigned int event_count;
 363
 364         struct amd8111e_priv *lp = netdev_priv(dev);
 365         void __iomem *mmio = lp->mmio;
 366         struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
 367
 368
 369         switch(cmod)
 370         {
 371                 case RX_INTR_COAL :
 372                         timeout = coal_conf->rx_timeout;
 373                         event_count = coal_conf->rx_event_count;
 374                         if( timeout > MAX_TIMEOUT ||
 375                                         event_count > MAX_EVENT_COUNT )
 376                                 return -EINVAL;
 377
 378                         timeout = timeout * DELAY_TIMER_CONV;
 379                         writel(VAL0|STINTEN, mmio+INTEN0);
 380                         writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout,
 381                                                         mmio+DLY_INT_A);
 382                         break;
 383
 384                 case TX_INTR_COAL :
 385                         timeout = coal_conf->tx_timeout;
 386                         event_count = coal_conf->tx_event_count;
 387                         if( timeout > MAX_TIMEOUT ||
 388                                         event_count > MAX_EVENT_COUNT )
 389                                 return -EINVAL;
 390
 391
 392                         timeout = timeout * DELAY_TIMER_CONV;
 393                         writel(VAL0|STINTEN,mmio+INTEN0);
 394                         writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout,
 395                                                          mmio+DLY_INT_B);
 396                         break;
 397
 398                 case DISABLE_COAL:
 399                         writel(0,mmio+STVAL);
 400                         writel(STINTEN, mmio+INTEN0);
 401                         writel(0, mmio +DLY_INT_B);
 402                         writel(0, mmio+DLY_INT_A);
 403                         break;
 404                  case ENABLE_COAL:
 405                        /* Start the timer */
 406                         writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /*  0.5 sec */
 407                         writel(VAL0|STINTEN, mmio+INTEN0);
 408                         break;
 409                 default:
 410                         break;
 411
 412    }
 413         return 0;
 414
 415 }
 416
 417 /* This function initializes the device registers  and starts the device. */
 418 static int amd8111e_restart(struct net_device *dev)
 419 {
 420         struct amd8111e_priv *lp = netdev_priv(dev);
 421         void __iomem *mmio = lp->mmio;
 422         int i,reg_val;
 423
 424         /* stop the chip */
 425         writel(RUN, mmio + CMD0);
 426
 427         if(amd8111e_init_ring(dev))
 428                 return -ENOMEM;
 429
 430         /* enable the port manager and set auto negotiation always */
 431         writel((u32) VAL1|EN_PMGR, mmio + CMD3 );
 432         writel((u32)XPHYANE|XPHYRST , mmio + CTRL2);
 433
 434         amd8111e_set_ext_phy(dev);
 435
 436         /* set control registers */
 437         reg_val = readl(mmio + CTRL1);
 438         reg_val &= ~XMTSP_MASK;
 439         writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 );
 440
 441         /* enable interrupt */
 442         writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN |
 443                 APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN |
 444                 SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0);
 445
 446         writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0);
 447
 448         /* initialize tx and rx ring base addresses */
 449         writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0);
 450         writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0);
 451
 452         writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0);
 453         writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0);
 454
 455         /* set default IPG to 96 */
 456         writew((u32)DEFAULT_IPG,mmio+IPG);
 457         writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1);
 458
 459         if(lp->options & OPTION_JUMBO_ENABLE){
 460                 writel((u32)VAL2|JUMBO, mmio + CMD3);
 461                 /* Reset REX_UFLO */
 462                 writel( REX_UFLO, mmio + CMD2);
 463                 /* Should not set REX_UFLO for jumbo frames */
 464                 writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2);
 465         }else{
 466                 writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2);
 467                 writel((u32)JUMBO, mmio + CMD3);
 468         }
 469
 470 #if AMD8111E_VLAN_TAG_USED
 471         writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3);
 472 #endif
 473         writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 );
 474
 475         /* Setting the MAC address to the device */
 476         for (i = 0; i < ETH_ALEN; i++)
 477                 writeb( dev->dev_addr[i], mmio + PADR + i );
 478
 479         /* Enable interrupt coalesce */
 480         if(lp->options & OPTION_INTR_COAL_ENABLE){
 481                 netdev_info(dev, "Interrupt Coalescing Enabled.\n");
 482                 amd8111e_set_coalesce(dev,ENABLE_COAL);
 483         }
 484
 485         /* set RUN bit to start the chip */
 486         writel(VAL2 | RDMD0, mmio + CMD0);
 487         writel(VAL0 | INTREN | RUN, mmio + CMD0);
 488
 489         /* To avoid PCI posting bug */
 490         readl(mmio+CMD0);
 491         return 0;
 492 }
 493
 494 /* This function clears necessary the device registers. */
 495 static void amd8111e_init_hw_default(struct amd8111e_priv *lp)
 496 {
 497         unsigned int reg_val;
 498         unsigned int logic_filter[2] ={0,};
 499         void __iomem *mmio = lp->mmio;
 500
 501
 502         /* stop the chip */
 503         writel(RUN, mmio + CMD0);
 504
 505         /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */
 506         writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0);
 507
 508         /* Clear RCV_RING_BASE_ADDR */
 509         writel(0, mmio + RCV_RING_BASE_ADDR0);
 510
 511         /* Clear XMT_RING_BASE_ADDR */
 512         writel(0, mmio + XMT_RING_BASE_ADDR0);
 513         writel(0, mmio + XMT_RING_BASE_ADDR1);
 514         writel(0, mmio + XMT_RING_BASE_ADDR2);
 515         writel(0, mmio + XMT_RING_BASE_ADDR3);
 516
 517         /* Clear CMD0  */
 518         writel(CMD0_CLEAR,mmio + CMD0);
 519
 520         /* Clear CMD2 */
 521         writel(CMD2_CLEAR, mmio +CMD2);
 522
 523         /* Clear CMD7 */
 524         writel(CMD7_CLEAR , mmio + CMD7);
 525
 526         /* Clear DLY_INT_A and DLY_INT_B */
 527         writel(0x0, mmio + DLY_INT_A);
 528         writel(0x0, mmio + DLY_INT_B);
 529
 530         /* Clear FLOW_CONTROL */
 531         writel(0x0, mmio + FLOW_CONTROL);
 532
 533         /* Clear INT0  write 1 to clear register */
 534         reg_val = readl(mmio + INT0);
 535         writel(reg_val, mmio + INT0);
 536
 537         /* Clear STVAL */
 538         writel(0x0, mmio + STVAL);
 539
 540         /* Clear INTEN0 */
 541         writel( INTEN0_CLEAR, mmio + INTEN0);
 542
 543         /* Clear LADRF */
 544         writel(0x0 , mmio + LADRF);
 545
 546         /* Set SRAM_SIZE & SRAM_BOUNDARY registers  */
 547         writel( 0x80010,mmio + SRAM_SIZE);
 548
 549         /* Clear RCV_RING0_LEN */
 550         writel(0x0, mmio +  RCV_RING_LEN0);
 551
 552         /* Clear XMT_RING0/1/2/3_LEN */
 553         writel(0x0, mmio +  XMT_RING_LEN0);
 554         writel(0x0, mmio +  XMT_RING_LEN1);
 555         writel(0x0, mmio +  XMT_RING_LEN2);
 556         writel(0x0, mmio +  XMT_RING_LEN3);
 557
 558         /* Clear XMT_RING_LIMIT */
 559         writel(0x0, mmio + XMT_RING_LIMIT);
 560
 561         /* Clear MIB */
 562         writew(MIB_CLEAR, mmio + MIB_ADDR);
 563
 564         /* Clear LARF */
 565         amd8111e_writeq(*(u64 *)logic_filter, mmio + LADRF);
 566
 567         /* SRAM_SIZE register */
 568         reg_val = readl(mmio + SRAM_SIZE);
 569
 570         if(lp->options & OPTION_JUMBO_ENABLE)
 571                 writel( VAL2|JUMBO, mmio + CMD3);
 572 #if AMD8111E_VLAN_TAG_USED
 573         writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 );
 574 #endif
 575         /* Set default value to CTRL1 Register */
 576         writel(CTRL1_DEFAULT, mmio + CTRL1);
 577
 578         /* To avoid PCI posting bug */
 579         readl(mmio + CMD2);
 580
 581 }
 582
 583 /* This function disables the interrupt and clears all the pending
 584  * interrupts in INT0
 585  */
 586 static void amd8111e_disable_interrupt(struct amd8111e_priv *lp)
 587 {
 588         u32 intr0;
 589
 590         /* Disable interrupt */
 591         writel(INTREN, lp->mmio + CMD0);
 592
 593         /* Clear INT0 */
 594         intr0 = readl(lp->mmio + INT0);
 595         writel(intr0, lp->mmio + INT0);
 596
 597         /* To avoid PCI posting bug */
 598         readl(lp->mmio + INT0);
 599
 600 }
 601
 602 /* This function stops the chip. */
 603 static void amd8111e_stop_chip(struct amd8111e_priv *lp)
 604 {
 605         writel(RUN, lp->mmio + CMD0);
 606
 607         /* To avoid PCI posting bug */
 608         readl(lp->mmio + CMD0);
 609 }
 610
 611 /* This function frees the  transmiter and receiver descriptor rings. */
 612 static void amd8111e_free_ring(struct amd8111e_priv *lp)
 613 {
 614         /* Free transmit and receive descriptor rings */
 615         if(lp->rx_ring){
 616                 pci_free_consistent(lp->pci_dev,
 617                         sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
 618                         lp->rx_ring, lp->rx_ring_dma_addr);
 619                 lp->rx_ring = NULL;
 620         }
 621
 622         if(lp->tx_ring){
 623                 pci_free_consistent(lp->pci_dev,
 624                         sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
 625                         lp->tx_ring, lp->tx_ring_dma_addr);
 626
 627                 lp->tx_ring = NULL;
 628         }
 629
 630 }
 631
 632 /* This function will free all the transmit skbs that are actually
 633  * transmitted by the device. It will check the ownership of the
 634  * skb before freeing the skb.
 635  */
 636 static int amd8111e_tx(struct net_device *dev)
 637 {
 638         struct amd8111e_priv *lp = netdev_priv(dev);
 639         int tx_index;
 640         int status;
 641         /* Complete all the transmit packet */
 642         while (lp->tx_complete_idx != lp->tx_idx){
 643                 tx_index =  lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
 644                 status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags);
 645
 646                 if(status & OWN_BIT)
 647                         break;  /* It still hasn't been Txed */
 648
 649                 lp->tx_ring[tx_index].buff_phy_addr = 0;
 650
 651                 /* We must free the original skb */
 652                 if (lp->tx_skbuff[tx_index]) {
 653                         pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index],
 654                                         lp->tx_skbuff[tx_index]->len,
 655                                         PCI_DMA_TODEVICE);
 656                         dev_consume_skb_irq(lp->tx_skbuff[tx_index]);
 657                         lp->tx_skbuff[tx_index] = NULL;
 658                         lp->tx_dma_addr[tx_index] = 0;
 659                 }
 660                 lp->tx_complete_idx++;
 661                 /*COAL update tx coalescing parameters */
 662                 lp->coal_conf.tx_packets++;
 663                 lp->coal_conf.tx_bytes +=
 664                         le16_to_cpu(lp->tx_ring[tx_index].buff_count);
 665
 666                 if (netif_queue_stopped(dev) &&
 667                         lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){
 668                         /* The ring is no longer full, clear tbusy. */
 669                         /* lp->tx_full = 0; */
 670                         netif_wake_queue (dev);
 671                 }
 672         }
 673         return 0;
 674 }
 675
 676 /* This function handles the driver receive operation in polling mode */
 677 static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
 678 {
 679         struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi);
 680         struct net_device *dev = lp->amd8111e_net_dev;
 681         int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
 682         void __iomem *mmio = lp->mmio;
 683         struct sk_buff *skb,*new_skb;
 684         int min_pkt_len, status;
 685         int num_rx_pkt = 0;
 686         short pkt_len;
 687 #if AMD8111E_VLAN_TAG_USED
 688         short vtag;
 689 #endif
 690
 691         while (num_rx_pkt < budget) {
 692                 status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
 693                 if (status & OWN_BIT)
 694                         break;
 695
 696                 /* There is a tricky error noted by John Murphy,
 697                  * <murf@perftech.com> to Russ Nelson: Even with
 698                  * full-sized * buffers it's possible for a
 699                  * jabber packet to use two buffers, with only
 700                  * the last correctly noting the error.
 701                  */
 702                 if (status & ERR_BIT) {
 703                         /* resetting flags */
 704                         lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
 705                         goto err_next_pkt;
 706                 }
 707                 /* check for STP and ENP */
 708                 if (!((status & STP_BIT) && (status & ENP_BIT))){
 709                         /* resetting flags */
 710                         lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
 711                         goto err_next_pkt;
 712                 }
 713                 pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
 714
 715 #if AMD8111E_VLAN_TAG_USED
 716                 vtag = status & TT_MASK;
 717                 /* MAC will strip vlan tag */
 718                 if (vtag != 0)
 719                         min_pkt_len = MIN_PKT_LEN - 4;
 720                         else
 721 #endif
 722                         min_pkt_len = MIN_PKT_LEN;
 723
 724                 if (pkt_len < min_pkt_len) {
 725                         lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
 726                         lp->drv_rx_errors++;
 727                         goto err_next_pkt;
 728                 }
 729                 new_skb = netdev_alloc_skb(dev, lp->rx_buff_len);
 730                 if (!new_skb) {
 731                         /* if allocation fail,
 732                          * ignore that pkt and go to next one
 733                          */
 734                         lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
 735                         lp->drv_rx_errors++;
 736                         goto err_next_pkt;
 737                 }
 738
 739                 skb_reserve(new_skb, 2);
 740                 skb = lp->rx_skbuff[rx_index];
 741                 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index],
 742                                  lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
 743                 skb_put(skb, pkt_len);
 744                 lp->rx_skbuff[rx_index] = new_skb;
 745                 lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev,
 746                                                            new_skb->data,
 747                                                            lp->rx_buff_len-2,
 748                                                            PCI_DMA_FROMDEVICE);
 749
 750                 skb->protocol = eth_type_trans(skb, dev);
 751
 752 #if AMD8111E_VLAN_TAG_USED
 753                 if (vtag == TT_VLAN_TAGGED){
 754                         u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info);
 755                         __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
 756                 }
 757 #endif
 758                 napi_gro_receive(napi, skb);
 759                 /* COAL update rx coalescing parameters */
 760                 lp->coal_conf.rx_packets++;
 761                 lp->coal_conf.rx_bytes += pkt_len;
 762                 num_rx_pkt++;
 763
 764 err_next_pkt:
 765                 lp->rx_ring[rx_index].buff_phy_addr
 766                         = cpu_to_le32(lp->rx_dma_addr[rx_index]);
 767                 lp->rx_ring[rx_index].buff_count =
 768                         cpu_to_le16(lp->rx_buff_len-2);
 769                 wmb();
 770                 lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
 771                 rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
 772         }
 773
 774         if (num_rx_pkt < budget && napi_complete_done(napi, num_rx_pkt)) {
 775                 unsigned long flags;
 776
 777                 /* Receive descriptor is empty now */
 778                 spin_lock_irqsave(&lp->lock, flags);
 779                 writel(VAL0|RINTEN0, mmio + INTEN0);
 780                 writel(VAL2 | RDMD0, mmio + CMD0);
 781                 spin_unlock_irqrestore(&lp->lock, flags);
 782         }
 783
 784         return num_rx_pkt;
 785 }
 786
 787 /* This function will indicate the link status to the kernel. */
 788 static int amd8111e_link_change(struct net_device *dev)
 789 {
 790         struct amd8111e_priv *lp = netdev_priv(dev);
 791         int status0,speed;
 792
 793         /* read the link change */
 794         status0 = readl(lp->mmio + STAT0);
 795
 796         if(status0 & LINK_STATS){
 797                 if(status0 & AUTONEG_COMPLETE)
 798                         lp->link_config.autoneg = AUTONEG_ENABLE;
 799                 else
 800                         lp->link_config.autoneg = AUTONEG_DISABLE;
 801
 802                 if(status0 & FULL_DPLX)
 803                         lp->link_config.duplex = DUPLEX_FULL;
 804                 else
 805                         lp->link_config.duplex = DUPLEX_HALF;
 806                 speed = (status0 & SPEED_MASK) >> 7;
 807                 if(speed == PHY_SPEED_10)
 808                         lp->link_config.speed = SPEED_10;
 809                 else if(speed == PHY_SPEED_100)
 810                         lp->link_config.speed = SPEED_100;
 811
 812                 netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n",
 813                             (lp->link_config.speed == SPEED_100) ?
 814                                                         "100" : "10",
 815                             (lp->link_config.duplex == DUPLEX_FULL) ?
 816                                                         "Full" : "Half");
 817
 818                 netif_carrier_on(dev);
 819         }
 820         else{
 821                 lp->link_config.speed = SPEED_INVALID;
 822                 lp->link_config.duplex = DUPLEX_INVALID;
 823                 lp->link_config.autoneg = AUTONEG_INVALID;
 824                 netdev_info(dev, "Link is Down.\n");
 825                 netif_carrier_off(dev);
 826         }
 827
 828         return 0;
 829 }
 830
 831 /* This function reads the mib counters. */
 832 static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER)
 833 {
 834         unsigned int  status;
 835         unsigned  int data;
 836         unsigned int repeat = REPEAT_CNT;
 837
 838         writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR);
 839         do {
 840                 status = readw(mmio + MIB_ADDR);
 841                 udelay(2);      /* controller takes MAX 2 us to get mib data */
 842         }
 843         while (--repeat && (status & MIB_CMD_ACTIVE));
 844
 845         data = readl(mmio + MIB_DATA);
 846         return data;
 847 }
 848
 849 /* This function reads the mib registers and returns the hardware statistics.
 850  * It updates previous internal driver statistics with new values.
 851  */
 852 static struct net_device_stats *amd8111e_get_stats(struct net_device *dev)
 853 {
 854         struct amd8111e_priv *lp = netdev_priv(dev);
 855         void __iomem *mmio = lp->mmio;
 856         unsigned long flags;
 857         struct net_device_stats *new_stats = &dev->stats;
 858
 859         if (!lp->opened)
 860                 return new_stats;
 861         spin_lock_irqsave (&lp->lock, flags);
 862
 863         /* stats.rx_packets */
 864         new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+
 865                                 amd8111e_read_mib(mmio, rcv_multicast_pkts)+
 866                                 amd8111e_read_mib(mmio, rcv_unicast_pkts);
 867
 868         /* stats.tx_packets */
 869         new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets);
 870
 871         /*stats.rx_bytes */
 872         new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets);
 873
 874         /* stats.tx_bytes */
 875         new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets);
 876
 877         /* stats.rx_errors */
 878         /* hw errors + errors driver reported */
 879         new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+
 880                                 amd8111e_read_mib(mmio, rcv_fragments)+
 881                                 amd8111e_read_mib(mmio, rcv_jabbers)+
 882                                 amd8111e_read_mib(mmio, rcv_alignment_errors)+
 883                                 amd8111e_read_mib(mmio, rcv_fcs_errors)+
 884                                 amd8111e_read_mib(mmio, rcv_miss_pkts)+
 885                                 lp->drv_rx_errors;
 886
 887         /* stats.tx_errors */
 888         new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
 889
 890         /* stats.rx_dropped*/
 891         new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts);
 892
 893         /* stats.tx_dropped*/
 894         new_stats->tx_dropped = amd8111e_read_mib(mmio,  xmt_underrun_pkts);
 895
 896         /* stats.multicast*/
 897         new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts);
 898
 899         /* stats.collisions*/
 900         new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions);
 901
 902         /* stats.rx_length_errors*/
 903         new_stats->rx_length_errors =
 904                 amd8111e_read_mib(mmio, rcv_undersize_pkts)+
 905                 amd8111e_read_mib(mmio, rcv_oversize_pkts);
 906
 907         /* stats.rx_over_errors*/
 908         new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
 909
 910         /* stats.rx_crc_errors*/
 911         new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors);
 912
 913         /* stats.rx_frame_errors*/
 914         new_stats->rx_frame_errors =
 915                 amd8111e_read_mib(mmio, rcv_alignment_errors);
 916
 917         /* stats.rx_fifo_errors */
 918         new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
 919
 920         /* stats.rx_missed_errors */
 921         new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
 922
 923         /* stats.tx_aborted_errors*/
 924         new_stats->tx_aborted_errors =
 925                 amd8111e_read_mib(mmio, xmt_excessive_collision);
 926
 927         /* stats.tx_carrier_errors*/
 928         new_stats->tx_carrier_errors =
 929                 amd8111e_read_mib(mmio, xmt_loss_carrier);
 930
 931         /* stats.tx_fifo_errors*/
 932         new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
 933
 934         /* stats.tx_window_errors*/
 935         new_stats->tx_window_errors =
 936                 amd8111e_read_mib(mmio, xmt_late_collision);
 937
 938         /* Reset the mibs for collecting new statistics */
 939         /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/
 940
 941         spin_unlock_irqrestore (&lp->lock, flags);
 942
 943         return new_stats;
 944 }
 945
 946 /* This function recalculate the interrupt coalescing  mode on every interrupt
 947  * according to the datarate and the packet rate.
 948  */
 949 static int amd8111e_calc_coalesce(struct net_device *dev)
 950 {
 951         struct amd8111e_priv *lp = netdev_priv(dev);
 952         struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
 953         int tx_pkt_rate;
 954         int rx_pkt_rate;
 955         int tx_data_rate;
 956         int rx_data_rate;
 957         int rx_pkt_size;
 958         int tx_pkt_size;
 959
 960         tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets;
 961         coal_conf->tx_prev_packets =  coal_conf->tx_packets;
 962
 963         tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes;
 964         coal_conf->tx_prev_bytes =  coal_conf->tx_bytes;
 965
 966         rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets;
 967         coal_conf->rx_prev_packets =  coal_conf->rx_packets;
 968
 969         rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes;
 970         coal_conf->rx_prev_bytes =  coal_conf->rx_bytes;
 971
 972         if(rx_pkt_rate < 800){
 973                 if(coal_conf->rx_coal_type != NO_COALESCE){
 974
 975                         coal_conf->rx_timeout = 0x0;
 976                         coal_conf->rx_event_count = 0;
 977                         amd8111e_set_coalesce(dev,RX_INTR_COAL);
 978                         coal_conf->rx_coal_type = NO_COALESCE;
 979                 }
 980         }
 981         else{
 982
 983                 rx_pkt_size = rx_data_rate/rx_pkt_rate;
 984                 if (rx_pkt_size < 128){
 985                         if(coal_conf->rx_coal_type != NO_COALESCE){
 986
 987                                 coal_conf->rx_timeout = 0;
 988                                 coal_conf->rx_event_count = 0;
 989                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
 990                                 coal_conf->rx_coal_type = NO_COALESCE;
 991                         }
 992
 993                 }
 994                 else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){
 995
 996                         if(coal_conf->rx_coal_type !=  LOW_COALESCE){
 997                                 coal_conf->rx_timeout = 1;
 998                                 coal_conf->rx_event_count = 4;
 999                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1000                                 coal_conf->rx_coal_type = LOW_COALESCE;
1001                         }
1002                 }
1003                 else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){
1004
1005                         if(coal_conf->rx_coal_type !=  MEDIUM_COALESCE){
1006                                 coal_conf->rx_timeout = 1;
1007                                 coal_conf->rx_event_count = 4;
1008                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1009                                 coal_conf->rx_coal_type = MEDIUM_COALESCE;
1010                         }
1011
1012                 }
1013                 else if(rx_pkt_size >= 1024){
1014                         if(coal_conf->rx_coal_type !=  HIGH_COALESCE){
1015                                 coal_conf->rx_timeout = 2;
1016                                 coal_conf->rx_event_count = 3;
1017                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1018                                 coal_conf->rx_coal_type = HIGH_COALESCE;
1019                         }
1020                 }
1021         }
1022         /* NOW FOR TX INTR COALESC */
1023         if(tx_pkt_rate < 800){
1024                 if(coal_conf->tx_coal_type != NO_COALESCE){
1025
1026                         coal_conf->tx_timeout = 0x0;
1027                         coal_conf->tx_event_count = 0;
1028                         amd8111e_set_coalesce(dev,TX_INTR_COAL);
1029                         coal_conf->tx_coal_type = NO_COALESCE;
1030                 }
1031         }
1032         else{
1033
1034                 tx_pkt_size = tx_data_rate/tx_pkt_rate;
1035                 if (tx_pkt_size < 128){
1036
1037                         if(coal_conf->tx_coal_type != NO_COALESCE){
1038
1039                                 coal_conf->tx_timeout = 0;
1040                                 coal_conf->tx_event_count = 0;
1041                                 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1042                                 coal_conf->tx_coal_type = NO_COALESCE;
1043                         }
1044
1045                 }
1046                 else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){
1047
1048                         if(coal_conf->tx_coal_type !=  LOW_COALESCE){
1049                                 coal_conf->tx_timeout = 1;
1050                                 coal_conf->tx_event_count = 2;
1051                                 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1052                                 coal_conf->tx_coal_type = LOW_COALESCE;
1053
1054                         }
1055                 }
1056                 else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){
1057
1058                         if(coal_conf->tx_coal_type !=  MEDIUM_COALESCE){
1059                                 coal_conf->tx_timeout = 2;
1060                                 coal_conf->tx_event_count = 5;
1061                                 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1062                                 coal_conf->tx_coal_type = MEDIUM_COALESCE;
1063                         }
1064                 } else if (tx_pkt_size >= 1024) {
1065                         if (coal_conf->tx_coal_type != HIGH_COALESCE) {
1066                                 coal_conf->tx_timeout = 4;
1067                                 coal_conf->tx_event_count = 8;
1068                                 amd8111e_set_coalesce(dev, TX_INTR_COAL);
1069                                 coal_conf->tx_coal_type = HIGH_COALESCE;
1070                         }
1071                 }
1072         }
1073         return 0;
1074
1075 }
1076
1077 /* This is device interrupt function. It handles transmit,
1078  * receive,link change and hardware timer interrupts.
1079  */
1080 static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
1081 {
1082
1083         struct net_device *dev = (struct net_device *)dev_id;
1084         struct amd8111e_priv *lp = netdev_priv(dev);
1085         void __iomem *mmio = lp->mmio;
1086         unsigned int intr0, intren0;
1087         unsigned int handled = 1;
1088
1089         if(unlikely(dev == NULL))
1090                 return IRQ_NONE;
1091
1092         spin_lock(&lp->lock);
1093
1094         /* disabling interrupt */
1095         writel(INTREN, mmio + CMD0);
1096
1097         /* Read interrupt status */
1098         intr0 = readl(mmio + INT0);
1099         intren0 = readl(mmio + INTEN0);
1100
1101         /* Process all the INT event until INTR bit is clear. */
1102
1103         if (!(intr0 & INTR)){
1104                 handled = 0;
1105                 goto err_no_interrupt;
1106         }
1107
1108         /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */
1109         writel(intr0, mmio + INT0);
1110
1111         /* Check if Receive Interrupt has occurred. */
1112         if (intr0 & RINT0) {
1113                 if (napi_schedule_prep(&lp->napi)) {
1114                         /* Disable receive interupts */
1115                         writel(RINTEN0, mmio + INTEN0);
1116                         /* Schedule a polling routine */
1117                         __napi_schedule(&lp->napi);
1118                 } else if (intren0 & RINTEN0) {
1119                         netdev_dbg(dev, "************Driver bug! interrupt while in poll\n");
1120                         /* Fix by disable receive interrupts */
1121                         writel(RINTEN0, mmio + INTEN0);
1122                 }
1123         }
1124
1125         /* Check if  Transmit Interrupt has occurred. */
1126         if (intr0 & TINT0)
1127                 amd8111e_tx(dev);
1128
1129         /* Check if  Link Change Interrupt has occurred. */
1130         if (intr0 & LCINT)
1131                 amd8111e_link_change(dev);
1132
1133         /* Check if Hardware Timer Interrupt has occurred. */
1134         if (intr0 & STINT)
1135                 amd8111e_calc_coalesce(dev);
1136
1137 err_no_interrupt:
1138         writel( VAL0 | INTREN,mmio + CMD0);
1139
1140         spin_unlock(&lp->lock);
1141
1142         return IRQ_RETVAL(handled);
1143 }
1144
1145 #ifdef CONFIG_NET_POLL_CONTROLLER
1146 static void amd8111e_poll(struct net_device *dev)
1147 {
1148         unsigned long flags;
1149         local_irq_save(flags);
1150         amd8111e_interrupt(0, dev);
1151         local_irq_restore(flags);
1152 }
1153 #endif
1154
1155
1156 /* This function closes the network interface and updates
1157  * the statistics so that most recent statistics will be
1158  * available after the interface is down.
1159  */
1160 static int amd8111e_close(struct net_device *dev)
1161 {
1162         struct amd8111e_priv *lp = netdev_priv(dev);
1163         netif_stop_queue(dev);
1164
1165         napi_disable(&lp->napi);
1166
1167         spin_lock_irq(&lp->lock);
1168
1169         amd8111e_disable_interrupt(lp);
1170         amd8111e_stop_chip(lp);
1171
1172         /* Free transmit and receive skbs */
1173         amd8111e_free_skbs(lp->amd8111e_net_dev);
1174
1175         netif_carrier_off(lp->amd8111e_net_dev);
1176
1177         /* Delete ipg timer */
1178         if(lp->options & OPTION_DYN_IPG_ENABLE)
1179                 del_timer_sync(&lp->ipg_data.ipg_timer);
1180
1181         spin_unlock_irq(&lp->lock);
1182         free_irq(dev->irq, dev);
1183         amd8111e_free_ring(lp);
1184
1185         /* Update the statistics before closing */
1186         amd8111e_get_stats(dev);
1187         lp->opened = 0;
1188         return 0;
1189 }
1190
1191 /* This function opens new interface.It requests irq for the device,
1192  * initializes the device,buffers and descriptors, and starts the device.
1193  */
1194 static int amd8111e_open(struct net_device *dev)
1195 {
1196         struct amd8111e_priv *lp = netdev_priv(dev);
1197
1198         if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
1199                                          dev->name, dev))
1200                 return -EAGAIN;
1201
1202         napi_enable(&lp->napi);
1203
1204         spin_lock_irq(&lp->lock);
1205
1206         amd8111e_init_hw_default(lp);
1207
1208         if(amd8111e_restart(dev)){
1209                 spin_unlock_irq(&lp->lock);
1210                 napi_disable(&lp->napi);
1211                 if (dev->irq)
1212                         free_irq(dev->irq, dev);
1213                 return -ENOMEM;
1214         }
1215         /* Start ipg timer */
1216         if(lp->options & OPTION_DYN_IPG_ENABLE){
1217                 add_timer(&lp->ipg_data.ipg_timer);
1218                 netdev_info(dev, "Dynamic IPG Enabled\n");
1219         }
1220
1221         lp->opened = 1;
1222
1223         spin_unlock_irq(&lp->lock);
1224
1225         netif_start_queue(dev);
1226
1227         return 0;
1228 }
1229
1230 /* This function checks if there is any transmit  descriptors
1231  * available to queue more packet.
1232  */
1233 static int amd8111e_tx_queue_avail(struct amd8111e_priv *lp)
1234 {
1235         int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK;
1236         if (lp->tx_skbuff[tx_index])
1237                 return -1;
1238         else
1239                 return 0;
1240
1241 }
1242
1243 /* This function will queue the transmit packets to the
1244  * descriptors and will trigger the send operation. It also
1245  * initializes the transmit descriptors with buffer physical address,
1246  * byte count, ownership to hardware etc.
1247  */
1248 static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb,
1249                                        struct net_device *dev)
1250 {
1251         struct amd8111e_priv *lp = netdev_priv(dev);
1252         int tx_index;
1253         unsigned long flags;
1254
1255         spin_lock_irqsave(&lp->lock, flags);
1256
1257         tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK;
1258
1259         lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len);
1260
1261         lp->tx_skbuff[tx_index] = skb;
1262         lp->tx_ring[tx_index].tx_flags = 0;
1263
1264 #if AMD8111E_VLAN_TAG_USED
1265         if (skb_vlan_tag_present(skb)) {
1266                 lp->tx_ring[tx_index].tag_ctrl_cmd |=
1267                                 cpu_to_le16(TCC_VLAN_INSERT);
1268                 lp->tx_ring[tx_index].tag_ctrl_info =
1269                                 cpu_to_le16(skb_vlan_tag_get(skb));
1270
1271         }
1272 #endif
1273         lp->tx_dma_addr[tx_index] =
1274             pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
1275         lp->tx_ring[tx_index].buff_phy_addr =
1276             cpu_to_le32(lp->tx_dma_addr[tx_index]);
1277
1278         /*  Set FCS and LTINT bits */
1279         wmb();
1280         lp->tx_ring[tx_index].tx_flags |=
1281             cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT);
1282
1283         lp->tx_idx++;
1284
1285         /* Trigger an immediate send poll. */
1286         writel( VAL1 | TDMD0, lp->mmio + CMD0);
1287         writel( VAL2 | RDMD0,lp->mmio + CMD0);
1288
1289         if(amd8111e_tx_queue_avail(lp) < 0){
1290                 netif_stop_queue(dev);
1291         }
1292         spin_unlock_irqrestore(&lp->lock, flags);
1293         return NETDEV_TX_OK;
1294 }
1295 /* This function returns all the memory mapped registers of the device. */
1296 static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
1297 {
1298         void __iomem *mmio = lp->mmio;
1299         /* Read only necessary registers */
1300         buf[0] = readl(mmio + XMT_RING_BASE_ADDR0);
1301         buf[1] = readl(mmio + XMT_RING_LEN0);
1302         buf[2] = readl(mmio + RCV_RING_BASE_ADDR0);
1303         buf[3] = readl(mmio + RCV_RING_LEN0);
1304         buf[4] = readl(mmio + CMD0);
1305         buf[5] = readl(mmio + CMD2);
1306         buf[6] = readl(mmio + CMD3);
1307         buf[7] = readl(mmio + CMD7);
1308         buf[8] = readl(mmio + INT0);
1309         buf[9] = readl(mmio + INTEN0);
1310         buf[10] = readl(mmio + LADRF);
1311         buf[11] = readl(mmio + LADRF+4);
1312         buf[12] = readl(mmio + STAT0);
1313 }
1314
1315
1316 /* This function sets promiscuos mode, all-multi mode or the multicast address
1317  * list to the device.
1318  */
1319 static void amd8111e_set_multicast_list(struct net_device *dev)
1320 {
1321         struct netdev_hw_addr *ha;
1322         struct amd8111e_priv *lp = netdev_priv(dev);
1323         u32 mc_filter[2] ;
1324         int bit_num;
1325
1326         if(dev->flags & IFF_PROMISC){
1327                 writel( VAL2 | PROM, lp->mmio + CMD2);
1328                 return;
1329         }
1330         else
1331                 writel( PROM, lp->mmio + CMD2);
1332         if (dev->flags & IFF_ALLMULTI ||
1333             netdev_mc_count(dev) > MAX_FILTER_SIZE) {
1334                 /* get all multicast packet */
1335                 mc_filter[1] = mc_filter[0] = 0xffffffff;
1336                 lp->options |= OPTION_MULTICAST_ENABLE;
1337                 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1338                 return;
1339         }
1340         if (netdev_mc_empty(dev)) {
1341                 /* get only own packets */
1342                 mc_filter[1] = mc_filter[0] = 0;
1343                 lp->options &= ~OPTION_MULTICAST_ENABLE;
1344                 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1345                 /* disable promiscuous mode */
1346                 writel(PROM, lp->mmio + CMD2);
1347                 return;
1348         }
1349         /* load all the multicast addresses in the logic filter */
1350         lp->options |= OPTION_MULTICAST_ENABLE;
1351         mc_filter[1] = mc_filter[0] = 0;
1352         netdev_for_each_mc_addr(ha, dev) {
1353                 bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f;
1354                 mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
1355         }
1356         amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
1357
1358         /* To eliminate PCI posting bug */
1359         readl(lp->mmio + CMD2);
1360
1361 }
1362
1363 static void amd8111e_get_drvinfo(struct net_device *dev,
1364                                  struct ethtool_drvinfo *info)
1365 {
1366         struct amd8111e_priv *lp = netdev_priv(dev);
1367         struct pci_dev *pci_dev = lp->pci_dev;
1368         strlcpy(info->driver, MODULE_NAME, sizeof(info->driver));
1369         strlcpy(info->version, MODULE_VERS, sizeof(info->version));
1370         snprintf(info->fw_version, sizeof(info->fw_version),
1371                 "%u", chip_version);
1372         strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info));
1373 }
1374
1375 static int amd8111e_get_regs_len(struct net_device *dev)
1376 {
1377         return AMD8111E_REG_DUMP_LEN;
1378 }
1379
1380 static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
1381 {
1382         struct amd8111e_priv *lp = netdev_priv(dev);
1383         regs->version = 0;
1384         amd8111e_read_regs(lp, buf);
1385 }
1386
1387 static int amd8111e_get_link_ksettings(struct net_device *dev,
1388                                        struct ethtool_link_ksettings *cmd)
1389 {
1390         struct amd8111e_priv *lp = netdev_priv(dev);
1391         spin_lock_irq(&lp->lock);
1392         mii_ethtool_get_link_ksettings(&lp->mii_if, cmd);
1393         spin_unlock_irq(&lp->lock);
1394         return 0;
1395 }
1396
1397 static int amd8111e_set_link_ksettings(struct net_device *dev,
1398                                        const struct ethtool_link_ksettings *cmd)
1399 {
1400         struct amd8111e_priv *lp = netdev_priv(dev);
1401         int res;
1402         spin_lock_irq(&lp->lock);
1403         res = mii_ethtool_set_link_ksettings(&lp->mii_if, cmd);
1404         spin_unlock_irq(&lp->lock);
1405         return res;
1406 }
1407
1408 static int amd8111e_nway_reset(struct net_device *dev)
1409 {
1410         struct amd8111e_priv *lp = netdev_priv(dev);
1411         return mii_nway_restart(&lp->mii_if);
1412 }
1413
1414 static u32 amd8111e_get_link(struct net_device *dev)
1415 {
1416         struct amd8111e_priv *lp = netdev_priv(dev);
1417         return mii_link_ok(&lp->mii_if);
1418 }
1419
1420 static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1421 {
1422         struct amd8111e_priv *lp = netdev_priv(dev);
1423         wol_info->supported = WAKE_MAGIC|WAKE_PHY;
1424         if (lp->options & OPTION_WOL_ENABLE)
1425                 wol_info->wolopts = WAKE_MAGIC;
1426 }
1427
1428 static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1429 {
1430         struct amd8111e_priv *lp = netdev_priv(dev);
1431         if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY))
1432                 return -EINVAL;
1433         spin_lock_irq(&lp->lock);
1434         if (wol_info->wolopts & WAKE_MAGIC)
1435                 lp->options |=
1436                         (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE);
1437         else if(wol_info->wolopts & WAKE_PHY)
1438                 lp->options |=
1439                         (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE);
1440         else
1441                 lp->options &= ~OPTION_WOL_ENABLE;
1442         spin_unlock_irq(&lp->lock);
1443         return 0;
1444 }
1445
1446 static const struct ethtool_ops ops = {
1447         .get_drvinfo = amd8111e_get_drvinfo,
1448         .get_regs_len = amd8111e_get_regs_len,
1449         .get_regs = amd8111e_get_regs,
1450         .nway_reset = amd8111e_nway_reset,
1451         .get_link = amd8111e_get_link,
1452         .get_wol = amd8111e_get_wol,
1453         .set_wol = amd8111e_set_wol,
1454         .get_link_ksettings = amd8111e_get_link_ksettings,
1455         .set_link_ksettings = amd8111e_set_link_ksettings,
1456 };
1457
1458 /* This function handles all the  ethtool ioctls. It gives driver info,
1459  * gets/sets driver speed, gets memory mapped register values, forces
1460  * auto negotiation, sets/gets WOL options for ethtool application.
1461  */
1462 static int amd8111e_ioctl(struct net_device *dev , struct ifreq *ifr, int cmd)
1463 {
1464         struct mii_ioctl_data *data = if_mii(ifr);
1465         struct amd8111e_priv *lp = netdev_priv(dev);
1466         int err;
1467         u32 mii_regval;
1468
1469         switch(cmd) {
1470         case SIOCGMIIPHY:
1471                 data->phy_id = lp->ext_phy_addr;
1472
1473         /* fallthru */
1474         case SIOCGMIIREG:
1475
1476                 spin_lock_irq(&lp->lock);
1477                 err = amd8111e_read_phy(lp, data->phy_id,
1478                         data->reg_num & PHY_REG_ADDR_MASK, &mii_regval);
1479                 spin_unlock_irq(&lp->lock);
1480
1481                 data->val_out = mii_regval;
1482                 return err;
1483
1484         case SIOCSMIIREG:
1485
1486                 spin_lock_irq(&lp->lock);
1487                 err = amd8111e_write_phy(lp, data->phy_id,
1488                         data->reg_num & PHY_REG_ADDR_MASK, data->val_in);
1489                 spin_unlock_irq(&lp->lock);
1490
1491                 return err;
1492
1493         default:
1494                 /* do nothing */
1495                 break;
1496         }
1497         return -EOPNOTSUPP;
1498 }
1499 static int amd8111e_set_mac_address(struct net_device *dev, void *p)
1500 {
1501         struct amd8111e_priv *lp = netdev_priv(dev);
1502         int i;
1503         struct sockaddr *addr = p;
1504
1505         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1506         spin_lock_irq(&lp->lock);
1507         /* Setting the MAC address to the device */
1508         for (i = 0; i < ETH_ALEN; i++)
1509                 writeb( dev->dev_addr[i], lp->mmio + PADR + i );
1510
1511         spin_unlock_irq(&lp->lock);
1512
1513         return 0;
1514 }
1515
1516 /* This function changes the mtu of the device. It restarts the device  to
1517  * initialize the descriptor with new receive buffers.
1518  */
1519 static int amd8111e_change_mtu(struct net_device *dev, int new_mtu)
1520 {
1521         struct amd8111e_priv *lp = netdev_priv(dev);
1522         int err;
1523
1524         if (!netif_running(dev)) {
1525                 /* new_mtu will be used
1526                  * when device starts netxt time
1527                  */
1528                 dev->mtu = new_mtu;
1529                 return 0;
1530         }
1531
1532         spin_lock_irq(&lp->lock);
1533
1534         /* stop the chip */
1535         writel(RUN, lp->mmio + CMD0);
1536
1537         dev->mtu = new_mtu;
1538
1539         err = amd8111e_restart(dev);
1540         spin_unlock_irq(&lp->lock);
1541         if(!err)
1542                 netif_start_queue(dev);
1543         return err;
1544 }
1545
1546 static int amd8111e_enable_magicpkt(struct amd8111e_priv *lp)
1547 {
1548         writel( VAL1|MPPLBA, lp->mmio + CMD3);
1549         writel( VAL0|MPEN_SW, lp->mmio + CMD7);
1550
1551         /* To eliminate PCI posting bug */
1552         readl(lp->mmio + CMD7);
1553         return 0;
1554 }
1555
1556 static int amd8111e_enable_link_change(struct amd8111e_priv *lp)
1557 {
1558
1559         /* Adapter is already stoped/suspended/interrupt-disabled */
1560         writel(VAL0|LCMODE_SW,lp->mmio + CMD7);
1561
1562         /* To eliminate PCI posting bug */
1563         readl(lp->mmio + CMD7);
1564         return 0;
1565 }
1566
1567 /* This function is called when a packet transmission fails to complete
1568  * within a reasonable period, on the assumption that an interrupt have
1569  * failed or the interface is locked up. This function will reinitialize
1570  * the hardware.
1571  */
1572 static void amd8111e_tx_timeout(struct net_device *dev)
1573 {
1574         struct amd8111e_priv *lp = netdev_priv(dev);
1575         int err;
1576
1577         netdev_err(dev, "transmit timed out, resetting\n");
1578
1579         spin_lock_irq(&lp->lock);
1580         err = amd8111e_restart(dev);
1581         spin_unlock_irq(&lp->lock);
1582         if(!err)
1583                 netif_wake_queue(dev);
1584 }
1585 static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
1586 {
1587         struct net_device *dev = pci_get_drvdata(pci_dev);
1588         struct amd8111e_priv *lp = netdev_priv(dev);
1589
1590         if (!netif_running(dev))
1591                 return 0;
1592
1593         /* disable the interrupt */
1594         spin_lock_irq(&lp->lock);
1595         amd8111e_disable_interrupt(lp);
1596         spin_unlock_irq(&lp->lock);
1597
1598         netif_device_detach(dev);
1599
1600         /* stop chip */
1601         spin_lock_irq(&lp->lock);
1602         if(lp->options & OPTION_DYN_IPG_ENABLE)
1603                 del_timer_sync(&lp->ipg_data.ipg_timer);
1604         amd8111e_stop_chip(lp);
1605         spin_unlock_irq(&lp->lock);
1606
1607         if(lp->options & OPTION_WOL_ENABLE){
1608                  /* enable wol */
1609                 if(lp->options & OPTION_WAKE_MAGIC_ENABLE)
1610                         amd8111e_enable_magicpkt(lp);
1611                 if(lp->options & OPTION_WAKE_PHY_ENABLE)
1612                         amd8111e_enable_link_change(lp);
1613
1614                 pci_enable_wake(pci_dev, PCI_D3hot, 1);
1615                 pci_enable_wake(pci_dev, PCI_D3cold, 1);
1616
1617         }
1618         else{
1619                 pci_enable_wake(pci_dev, PCI_D3hot, 0);
1620                 pci_enable_wake(pci_dev, PCI_D3cold, 0);
1621         }
1622
1623         pci_save_state(pci_dev);
1624         pci_set_power_state(pci_dev, PCI_D3hot);
1625
1626         return 0;
1627 }
1628 static int amd8111e_resume(struct pci_dev *pci_dev)
1629 {
1630         struct net_device *dev = pci_get_drvdata(pci_dev);
1631         struct amd8111e_priv *lp = netdev_priv(dev);
1632
1633         if (!netif_running(dev))
1634                 return 0;
1635
1636         pci_set_power_state(pci_dev, PCI_D0);
1637         pci_restore_state(pci_dev);
1638
1639         pci_enable_wake(pci_dev, PCI_D3hot, 0);
1640         pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */
1641
1642         netif_device_attach(dev);
1643
1644         spin_lock_irq(&lp->lock);
1645         amd8111e_restart(dev);
1646         /* Restart ipg timer */
1647         if(lp->options & OPTION_DYN_IPG_ENABLE)
1648                 mod_timer(&lp->ipg_data.ipg_timer,
1649                                 jiffies + IPG_CONVERGE_JIFFIES);
1650         spin_unlock_irq(&lp->lock);
1651
1652         return 0;
1653 }
1654
1655 static void amd8111e_config_ipg(struct timer_list *t)
1656 {
1657         struct amd8111e_priv *lp = from_timer(lp, t, ipg_data.ipg_timer);
1658         struct ipg_info *ipg_data = &lp->ipg_data;
1659         void __iomem *mmio = lp->mmio;
1660         unsigned int prev_col_cnt = ipg_data->col_cnt;
1661         unsigned int total_col_cnt;
1662         unsigned int tmp_ipg;
1663
1664         if(lp->link_config.duplex == DUPLEX_FULL){
1665                 ipg_data->ipg = DEFAULT_IPG;
1666                 return;
1667         }
1668
1669         if(ipg_data->ipg_state == SSTATE){
1670
1671                 if(ipg_data->timer_tick == IPG_STABLE_TIME){
1672
1673                         ipg_data->timer_tick = 0;
1674                         ipg_data->ipg = MIN_IPG - IPG_STEP;
1675                         ipg_data->current_ipg = MIN_IPG;
1676                         ipg_data->diff_col_cnt = 0xFFFFFFFF;
1677                         ipg_data->ipg_state = CSTATE;
1678                 }
1679                 else
1680                         ipg_data->timer_tick++;
1681         }
1682
1683         if(ipg_data->ipg_state == CSTATE){
1684
1685                 /* Get the current collision count */
1686
1687                 total_col_cnt = ipg_data->col_cnt =
1688                                 amd8111e_read_mib(mmio, xmt_collisions);
1689
1690                 if ((total_col_cnt - prev_col_cnt) <
1691                                 (ipg_data->diff_col_cnt)){
1692
1693                         ipg_data->diff_col_cnt =
1694                                 total_col_cnt - prev_col_cnt ;
1695
1696                         ipg_data->ipg = ipg_data->current_ipg;
1697                 }
1698
1699                 ipg_data->current_ipg += IPG_STEP;
1700
1701                 if (ipg_data->current_ipg <= MAX_IPG)
1702                         tmp_ipg = ipg_data->current_ipg;
1703                 else{
1704                         tmp_ipg = ipg_data->ipg;
1705                         ipg_data->ipg_state = SSTATE;
1706                 }
1707                 writew((u32)tmp_ipg, mmio + IPG);
1708                 writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1);
1709         }
1710         mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES);
1711         return;
1712
1713 }
1714
1715 static void amd8111e_probe_ext_phy(struct net_device *dev)
1716 {
1717         struct amd8111e_priv *lp = netdev_priv(dev);
1718         int i;
1719
1720         for (i = 0x1e; i >= 0; i--) {
1721                 u32 id1, id2;
1722
1723                 if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1))
1724                         continue;
1725                 if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2))
1726                         continue;
1727                 lp->ext_phy_id = (id1 << 16) | id2;
1728                 lp->ext_phy_addr = i;
1729                 return;
1730         }
1731         lp->ext_phy_id = 0;
1732         lp->ext_phy_addr = 1;
1733 }
1734
1735 static const struct net_device_ops amd8111e_netdev_ops = {
1736         .ndo_open               = amd8111e_open,
1737         .ndo_stop               = amd8111e_close,
1738         .ndo_start_xmit         = amd8111e_start_xmit,
1739         .ndo_tx_timeout         = amd8111e_tx_timeout,
1740         .ndo_get_stats          = amd8111e_get_stats,
1741         .ndo_set_rx_mode        = amd8111e_set_multicast_list,
1742         .ndo_validate_addr      = eth_validate_addr,
1743         .ndo_set_mac_address    = amd8111e_set_mac_address,
1744         .ndo_do_ioctl           = amd8111e_ioctl,
1745         .ndo_change_mtu         = amd8111e_change_mtu,
1746 #ifdef CONFIG_NET_POLL_CONTROLLER
1747         .ndo_poll_controller     = amd8111e_poll,
1748 #endif
1749 };
1750
1751 static int amd8111e_probe_one(struct pci_dev *pdev,
1752                                   const struct pci_device_id *ent)
1753 {
1754         int err, i;
1755         unsigned long reg_addr,reg_len;
1756         struct amd8111e_priv *lp;
1757         struct net_device *dev;
1758
1759         err = pci_enable_device(pdev);
1760         if(err){
1761                 dev_err(&pdev->dev, "Cannot enable new PCI device\n");
1762                 return err;
1763         }
1764
1765         if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
1766                 dev_err(&pdev->dev, "Cannot find PCI base address\n");
1767                 err = -ENODEV;
1768                 goto err_disable_pdev;
1769         }
1770
1771         err = pci_request_regions(pdev, MODULE_NAME);
1772         if(err){
1773                 dev_err(&pdev->dev, "Cannot obtain PCI resources\n");
1774                 goto err_disable_pdev;
1775         }
1776
1777         pci_set_master(pdev);
1778
1779         /* Find power-management capability. */
1780         if (!pdev->pm_cap) {
1781                 dev_err(&pdev->dev, "No Power Management capability\n");
1782                 err = -ENODEV;
1783                 goto err_free_reg;
1784         }
1785
1786         /* Initialize DMA */
1787         if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) {
1788                 dev_err(&pdev->dev, "DMA not supported\n");
1789                 err = -ENODEV;
1790                 goto err_free_reg;
1791         }
1792
1793         reg_addr = pci_resource_start(pdev, 0);
1794         reg_len = pci_resource_len(pdev, 0);
1795
1796         dev = alloc_etherdev(sizeof(struct amd8111e_priv));
1797         if (!dev) {
1798                 err = -ENOMEM;
1799                 goto err_free_reg;
1800         }
1801
1802         SET_NETDEV_DEV(dev, &pdev->dev);
1803
1804 #if AMD8111E_VLAN_TAG_USED
1805         dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX ;
1806 #endif
1807
1808         lp = netdev_priv(dev);
1809         lp->pci_dev = pdev;
1810         lp->amd8111e_net_dev = dev;
1811         lp->pm_cap = pdev->pm_cap;
1812
1813         spin_lock_init(&lp->lock);
1814
1815         lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len);
1816         if (!lp->mmio) {
1817                 dev_err(&pdev->dev, "Cannot map device registers\n");
1818                 err = -ENOMEM;
1819                 goto err_free_dev;
1820         }
1821
1822         /* Initializing MAC address */
1823         for (i = 0; i < ETH_ALEN; i++)
1824                 dev->dev_addr[i] = readb(lp->mmio + PADR + i);
1825
1826         /* Setting user defined parametrs */
1827         lp->ext_phy_option = speed_duplex[card_idx];
1828         if(coalesce[card_idx])
1829                 lp->options |= OPTION_INTR_COAL_ENABLE;
1830         if(dynamic_ipg[card_idx++])
1831                 lp->options |= OPTION_DYN_IPG_ENABLE;
1832
1833
1834         /* Initialize driver entry points */
1835         dev->netdev_ops = &amd8111e_netdev_ops;
1836         dev->ethtool_ops = &ops;
1837         dev->irq =pdev->irq;
1838         dev->watchdog_timeo = AMD8111E_TX_TIMEOUT;
1839         dev->min_mtu = AMD8111E_MIN_MTU;
1840         dev->max_mtu = AMD8111E_MAX_MTU;
1841         netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32);
1842
1843 #if AMD8111E_VLAN_TAG_USED
1844         dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
1845 #endif
1846         /* Probe the external PHY */
1847         amd8111e_probe_ext_phy(dev);
1848
1849         /* setting mii default values */
1850         lp->mii_if.dev = dev;
1851         lp->mii_if.mdio_read = amd8111e_mdio_read;
1852         lp->mii_if.mdio_write = amd8111e_mdio_write;
1853         lp->mii_if.phy_id = lp->ext_phy_addr;
1854
1855         /* Set receive buffer length and set jumbo option*/
1856         amd8111e_set_rx_buff_len(dev);
1857
1858
1859         err = register_netdev(dev);
1860         if (err) {
1861                 dev_err(&pdev->dev, "Cannot register net device\n");
1862                 goto err_free_dev;
1863         }
1864
1865         pci_set_drvdata(pdev, dev);
1866
1867         /* Initialize software ipg timer */
1868         if(lp->options & OPTION_DYN_IPG_ENABLE){
1869                 timer_setup(&lp->ipg_data.ipg_timer, amd8111e_config_ipg, 0);
1870                 lp->ipg_data.ipg_timer.expires = jiffies +
1871                                                  IPG_CONVERGE_JIFFIES;
1872                 lp->ipg_data.ipg = DEFAULT_IPG;
1873                 lp->ipg_data.ipg_state = CSTATE;
1874         }
1875
1876         /*  display driver and device information */
1877         chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
1878         dev_info(&pdev->dev, "AMD-8111e Driver Version: %s\n", MODULE_VERS);
1879         dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
1880                  chip_version, dev->dev_addr);
1881         if (lp->ext_phy_id)
1882                 dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n",
1883                          lp->ext_phy_id, lp->ext_phy_addr);
1884         else
1885                 dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n");
1886
1887         return 0;
1888
1889 err_free_dev:
1890         free_netdev(dev);
1891
1892 err_free_reg:
1893         pci_release_regions(pdev);
1894
1895 err_disable_pdev:
1896         pci_disable_device(pdev);
1897         return err;
1898
1899 }
1900
1901 static void amd8111e_remove_one(struct pci_dev *pdev)
1902 {
1903         struct net_device *dev = pci_get_drvdata(pdev);
1904
1905         if (dev) {
1906                 unregister_netdev(dev);
1907                 free_netdev(dev);
1908                 pci_release_regions(pdev);
1909                 pci_disable_device(pdev);
1910         }
1911 }
1912
1913 static const struct pci_device_id amd8111e_pci_tbl[] = {
1914         {
1915          .vendor = PCI_VENDOR_ID_AMD,
1916          .device = PCI_DEVICE_ID_AMD8111E_7462,
1917         },
1918         {
1919          .vendor = 0,
1920         }
1921 };
1922 MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
1923
1924 static struct pci_driver amd8111e_driver = {
1925         .name           = MODULE_NAME,
1926         .id_table       = amd8111e_pci_tbl,
1927         .probe          = amd8111e_probe_one,
1928         .remove         = amd8111e_remove_one,
1929         .suspend        = amd8111e_suspend,
1930         .resume         = amd8111e_resume
1931 };
1932
1933 module_pci_driver(amd8111e_driver);