1 source "drivers/net/phy/Kconfig"
2 source "drivers/net/pfe_eth/Kconfig"
5 bool "Enable Driver Model for Ethernet drivers"
8 Enable driver model for Ethernet.
10 The eth_*() interface will be implemented by the UCLASS_ETH class
11 This is currently implemented in net/eth-uclass.c
12 Look in include/net.h for details.
15 bool "Network device support"
19 You must select Y to enable any network device support
20 Generally if you have any networking support this is a given
27 bool "Enable GbE PHY status parsing and configuration"
29 Enables support for parsing the status output and for
30 configuring GbE PHYs (affects the inner workings of some
31 commands and miiphyutil.c).
34 bool "Atheros AG7xxx Ethernet MAC support"
35 depends on DM_ETH && ARCH_ATH79
38 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
39 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
43 bool "Altera Triple-Speed Ethernet MAC support"
47 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
48 Please find details on the "Triple-Speed Ethernet MegaCore Function
49 Resource Center" of Altera.
52 bool "Broadcom SF2 (Starfighter2) Ethernet support"
55 This is an abstract framework which provides a generic interface
56 to MAC and DMA management for multiple Broadcom SoCs such as
57 Cygnus, NSP and bcm28155_ap platforms.
59 config BCM_SF2_ETH_DEFAULT_PORT
60 int "Broadcom SF2 (Starfighter2) Ethernet default port number"
61 depends on BCM_SF2_ETH
64 Default port number for the Starfighter2 ethernet driver.
66 config BCM_SF2_ETH_GMAC
67 bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
68 depends on BCM_SF2_ETH
70 This flag enables the ethernet support for Broadcom platforms with
71 GMAC such as Cygnus. This driver is based on the framework provided
72 by the BCM_SF2_ETH driver.
73 Say Y to any bcmcygnus based platforms.
76 bool "BCM6348 EMAC support"
77 depends on DM_ETH && ARCH_BMIPS
83 This driver supports the BCM6348 Ethernet MAC.
86 bool "BCM6368 EMAC support"
87 depends on DM_ETH && ARCH_BMIPS
91 This driver supports the BCM6368 Ethernet MAC.
94 bool "Synopsys DWC Ethernet QOS device support"
98 This driver supports the Synopsys Designware Ethernet QOS (Quality
99 Of Service) IP block. The IP supports many options for bus type,
100 clocking/reset structure, and feature list. This driver currently
101 supports the specific configuration used in NVIDIA's Tegra186 chip,
102 but should be extensible to other combinations quite easily.
105 bool "Intel PRO/1000 Gigabit Ethernet support"
107 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
108 adapters. For more information on how to identify your adapter, go
109 to the Adapter & Driver ID Guide at:
111 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
113 config E1000_SPI_GENERIC
114 bool "Allow access to the Intel 8257x SPI bus"
117 Allow generic access to the SPI bus on the Intel 8257x, for
118 example with the "sspi" command.
121 bool "Enable SPI bus utility code"
124 Utility code for direct access to the SPI bus on Intel 8257x.
125 This does not do anything useful unless you set at least one
126 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
129 bool "Enable the e1000 command"
132 This enables the 'e1000' management command for E1000 devices. When
133 used on devices with SPI support you can reprogram the EEPROM from
137 depends on DM_ETH && SANDBOX
139 bool "Sandbox: Mocked Ethernet driver"
141 This driver simply responds with fake ARP replies and ping
142 replies that are used to verify network stack functionality
144 This driver is particularly useful in the test/dm/eth.c tests
146 config ETH_SANDBOX_RAW
147 depends on DM_ETH && SANDBOX
149 bool "Sandbox: Bridge to Linux Raw Sockets"
151 This driver is a bridge from the bottom of the network stack
152 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
153 network traffic to be tested from within sandbox. See
154 board/sandbox/README.sandbox for more details.
156 config ETH_DESIGNWARE
157 bool "Synopsys Designware Ethernet MAC"
159 imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
161 This MAC is present in SoCs from various vendors. It supports
162 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
163 provide the PHY (physical media interface).
165 config ETH_DESIGNWARE_SOCFPGA
168 bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
169 depends on DM_ETH && ETH_DESIGNWARE
171 The Altera SoCFPGA requires additional configuration of the
172 Altera system manager to correctly interface with the PHY.
173 This code handles those SoC specifics.
176 bool "OpenCores 10/100 Mbps Ethernet MAC"
178 This MAC is present in OpenRISC and Xtensa XTFPGA boards.
180 config FEC_MXC_SHARE_MDIO
181 bool "Share the MDIO bus for FEC controller"
184 config FEC_MXC_MDIO_BASE
185 hex "MDIO base address for the FEC controller"
186 depends on FEC_MXC_SHARE_MDIO
188 This specifies the MDIO registers base address. It is used when
189 two FEC controllers share MDIO bus.
192 bool "FEC Ethernet controller"
193 depends on MX5 || MX6 || MX7 || IMX8 || VF610
195 This driver supports the 10/100 Fast Ethernet controller for
199 bool "Freescale FMan ethernet support"
200 depends on ARM || PPC
202 This driver support the Freescale FMan Ethernet controller
205 bool "Ftmac100 Ethernet Support"
207 This MAC is present in Andestech SoCs.
210 bool "Ftgmac100 Ethernet Support"
214 This driver supports the Faraday's FTGMAC100 Gigabit SoC
215 Ethernet controller that can be found on Aspeed SoCs (which
218 It is fully compliant with IEEE 802.3 specification for
219 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
220 Mbps Ethernet and includes Reduced Media Independent
221 Interface (RMII) and Reduced Gigabit Media Independent
222 Interface (RGMII) interfaces. It adopts an AHB bus interface
223 and integrates a link list DMA engine with direct M-Bus
224 accesses for transmitting and receiving packets. It has
225 independent TX/RX fifos, supports half and full duplex (1000
226 Mbps mode only supports full duplex), flow control for full
227 duplex and backpressure for half duplex.
229 The FTGMAC100 also implements IP, TCP, UDP checksum offloads
230 and supports IEEE 802.1Q VLAN tag insertion and removal. It
231 offers high-priority transmit queue for QoS and CoS
236 bool "Marvell Orion5x/Kirkwood network interface support"
237 depends on KIRKWOOD || ORION5X
238 select PHYLIB if DM_ETH
240 This driver supports the network interface units in the
241 Marvell Orion5x and Kirkwood SoCs
244 bool "Marvell Armada XP/385/3700 network interface support"
245 depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
248 This driver supports the network interface units in the
249 Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
252 bool "Marvell Armada 375/7K/8K network interface support"
253 depends on ARMADA_375 || ARMADA_8K
256 This driver supports the network interface units in the
257 Marvell ARMADA 375, 7K and 8K SoCs.
260 bool "Cadence MACB/GEM Ethernet Interface"
264 The Cadence MACB ethernet interface is found on many Atmel
265 AT91 and SAMA5 parts. This driver also supports the Cadence
266 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
267 Say Y to include support for the MACB/GEM chip.
270 bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
273 The Cadence MACB ethernet interface was used on Zynq platform.
274 Say Y to enable support for the MACB/GEM in Zynq chip.
277 bool "MediaTek MT7628 Ethernet Interface"
278 depends on SOC_MT7628
280 The MediaTek MT7628 ethernet interface is used on MT7628 and
284 bool "Intel Platform Controller Hub EG20T GMAC driver"
285 depends on DM_ETH && DM_PCI
288 This MAC is present in Intel Platform Controller Hub EG20T. It
289 supports 10/100/1000 Mbps operation.
294 Enable the support of the Reduced Gigabit Media-Independent
300 Enable support of the Media-Independent Interface (MII)
303 bool "Realtek 8139 series Ethernet controller driver"
305 This driver supports Realtek 8139 series fast ethernet family of
306 PCI chipsets/adapters.
309 bool "Realtek 8169 series Ethernet controller driver"
311 This driver supports Realtek 8169 series gigabit ethernet family of
312 PCI/PCIe chipsets/adapters.
315 bool "SMSC LAN911x and LAN921x controller driver"
320 hex "SMC911X Base Address"
322 Define this to hold the physical address
323 of the device (I/O space)
326 prompt "SMC911X bus width"
327 default SMC911X_16_BIT
329 config SMC911X_32_BIT
330 bool "Enable 32-bit interface"
332 config SMC911X_16_BIT
333 bool "Enable 16-bit interface"
335 Define this if data bus is 16 bits. If your processor
336 automatically converts one 32 bit word to two 16 bit
337 words you may also try CONFIG_SMC911X_32_BIT.
343 bool "Enable Allwinner GMAC Ethernet support"
345 Enable the support for Sun7i GMAC Ethernet controller
347 config SUN7I_GMAC_FORCE_TXERR
348 bool "Force PA17 as gmac function"
349 depends on SUN7I_GMAC
351 Some ethernet phys needs TXERR control. Since the GMAC
352 doesn't have such signal, setting PA17 as GMAC function
353 makes the pin output low, which enables data transmission.
356 bool "Allwinner Sun4i Ethernet MAC support"
360 This driver supports the Allwinner based SUN4I Ethernet MAC.
363 bool "Allwinner Sun8i Ethernet MAC support"
368 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
369 It can be found in H3/A64/A83T based SoCs and compatible with both
370 External and Internal PHYs.
373 bool "Renesas SH Ethernet MAC"
376 This driver supports the Ethernet for Renesas SH and ARM SoCs.
378 source "drivers/net/ti/Kconfig"
380 config XILINX_AXIEMAC
381 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
384 bool "Xilinx AXI Ethernet"
386 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
388 config XILINX_EMACLITE
389 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS)
392 bool "Xilinx Ethernetlite"
394 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
397 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
399 bool "Xilinx Ethernet GEM"
401 This MAC is present in Xilinx Zynq and ZynqMP SoCs.
404 bool "Microchip PIC32 Ethernet Support"
405 depends on DM_ETH && MACH_PIC32
408 This driver implements 10/100 Mbps Ethernet and MAC layer for
409 Microchip PIC32 microcontrollers.
412 bool "Rockchip Synopsys Designware Ethernet MAC"
413 depends on DM_ETH && ETH_DESIGNWARE
415 This driver provides Rockchip SoCs network support based on the
416 Synopsys Designware driver.
419 bool "Renesas Ethernet AVB MAC"
420 depends on DM_ETH && RCAR_GEN3
423 This driver implements support for the Ethernet AVB block in
424 Renesas M3 and H3 SoCs.
427 bool "Fast Ethernet Controller on MPC8XX"
431 This driver implements support for the Fast Ethernet Controller
435 bool "Socionext AVE Ethernet support"
436 depends on DM_ETH && ARCH_UNIPHIER
441 This driver implements support for the Socionext AVE Ethernet
442 controller, as found on the Socionext UniPhier family.
444 source "drivers/net/mscc_eswitch/Kconfig"
448 depends on MPC8XX_FEC
453 depends on ETHER_ON_FEC1
456 Define to the hardcoded PHY address which corresponds
457 to the given FEC; i. e.
458 #define CONFIG_FEC1_PHY 4
459 means that the PHY with address 4 is connected to FEC1
461 When set to -1, means to probe for first available.
465 depends on ETHER_ON_FEC1
468 The PHY does not have a RXERR line (RMII only).
469 (so program the FEC to ignore it).
473 depends on MPC8XX_FEC && MPC885
478 depends on ETHER_ON_FEC2
481 Define to the hardcoded PHY address which corresponds
482 to the given FEC; i. e.
483 #define CONFIG_FEC1_PHY 4
484 means that the PHY with address 4 is connected to FEC1
486 When set to -1, means to probe for first available.
488 config FEC2_PHY_NORXERR
490 depends on ETHER_ON_FEC2
493 The PHY does not have a RXERR line (RMII only).
494 (so program the FEC to ignore it).
496 config SYS_DPAA_QBMAN
497 bool "Device tree fixup for QBMan on freescale SOCs"
498 depends on (ARM || PPC) && !SPL_BUILD
499 default y if ARCH_B4860 || \
518 QBman fixups to allow deep sleep in DPAA 1 SOCs
522 bool "Enable Three-Speed Ethernet Controller"
524 This driver implements support for the (Enhanced) Three-Speed
525 Ethernet Controller found on Freescale SoCs.
528 bool "MediaTek Ethernet GMAC Driver"
534 This Driver support MediaTek Ethernet GMAC
535 Say Y to enable support for the MediaTek Ethernet GMAC.
537 config HIGMACV300_ETH
538 bool "HiSilicon Gigabit Ethernet Controller"
543 This driver supports HIGMACV300 Ethernet controller found on