2 * This file contains an ECC algorithm from Toshiba that detects and
3 * corrects 1 bit errors in a 256 byte block of data.
5 * drivers/mtd/nand/nand_ecc.c
7 * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
8 * Toshiba America Electronics Components, Inc.
10 * $Id: nand_ecc.c,v 1.14 2004/06/16 15:34:37 gleixner Exp $
12 * This file is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 or (at your option) any
17 * This file is distributed in the hope that it will be useful, but WITHOUT
18 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
19 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
22 * You should have received a copy of the GNU General Public License along
23 * with this file; if not, write to the Free Software Foundation, Inc.,
24 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
26 * As a special exception, if other files instantiate templates or use
27 * macros or inline functions from these files, or you compile these
28 * files and link them with other works to produce a work based on these
29 * files, these files do not by themselves cause the resulting work to be
30 * covered by the GNU General Public License. However the source code for
31 * these files must still be made available in accordance with section (3)
32 * of the GNU General Public License.
34 * This exception does not invalidate any other reasons why a work based on
35 * this file might be covered by the GNU General Public License.
40 #ifdef CONFIG_NEW_NAND_CODE
41 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
43 #include<linux/mtd/mtd.h>
45 * Pre-calculated 256-way 1 byte column parity
47 static const u_char nand_ecc_precalc_table[] = {
48 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
49 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
50 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
51 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
52 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
53 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
54 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
55 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
56 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
57 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
58 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
59 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
60 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
61 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
62 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
63 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
68 * nand_trans_result - [GENERIC] create non-inverted ECC
69 * @reg2: line parity reg 2
70 * @reg3: line parity reg 3
73 * Creates non-inverted ECC code from line parity
75 static void nand_trans_result(u_char reg2, u_char reg3,
78 u_char a, b, i, tmp1, tmp2;
80 /* Initialize variables */
84 /* Calculate first ECC byte */
85 for (i = 0; i < 4; i++) {
86 if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */
89 if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */
95 /* Calculate second ECC byte */
97 for (i = 0; i < 4; i++) {
98 if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */
101 if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */
107 /* Store two of the ECC bytes */
113 * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block
114 * @mtd: MTD block structure
116 * @ecc_code: buffer for ECC
118 int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
120 u_char idx, reg1, reg2, reg3;
123 /* Initialize variables */
124 reg1 = reg2 = reg3 = 0;
125 ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
127 /* Build up column parity */
128 for(j = 0; j < 256; j++) {
130 /* Get CP0 - CP5 from table */
131 idx = nand_ecc_precalc_table[dat[j]];
132 reg1 ^= (idx & 0x3f);
134 /* All bit XOR = 1 ? */
137 reg2 ^= ~((u_char) j);
141 /* Create non-inverted ECC code from line parity */
142 nand_trans_result(reg2, reg3, ecc_code);
144 /* Calculate final ECC code */
145 ecc_code[0] = ~ecc_code[0];
146 ecc_code[1] = ~ecc_code[1];
147 ecc_code[2] = ((~reg1) << 2) | 0x03;
152 * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
153 * @mtd: MTD block structure
154 * @dat: raw data read from the chip
155 * @read_ecc: ECC from the chip
156 * @calc_ecc: the ECC calculated from raw data
158 * Detect and correct a 1 bit error for 256 byte block
160 int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
162 u_char a, b, c, d1, d2, d3, add, bit, i;
164 /* Do error detection */
165 d1 = calc_ecc[0] ^ read_ecc[0];
166 d2 = calc_ecc[1] ^ read_ecc[1];
167 d3 = calc_ecc[2] ^ read_ecc[2];
169 if ((d1 | d2 | d3) == 0) {
174 a = (d1 ^ (d1 >> 1)) & 0x55;
175 b = (d2 ^ (d2 >> 1)) & 0x55;
176 c = (d3 ^ (d3 >> 1)) & 0x54;
178 /* Found and will correct single bit error in the data */
179 if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
183 for (i=0; i<4; i++) {
190 for (i=0; i<4; i++) {
199 for (i=0; i<3; i++) {
228 /* ECC Code Error Correction */
229 read_ecc[0] = calc_ecc[0];
230 read_ecc[1] = calc_ecc[1];
231 read_ecc[2] = calc_ecc[2];
235 /* Uncorrectable Error */
241 /* Should never happen */
245 #endif /* CONFIG_COMMANDS & CFG_CMD_NAND */
246 #endif /* CONFIG_NEW_NAND_CODE */