2 * linux/drivers/mtd/onenand/onenand_base.c
4 * Copyright (C) 2005-2007 Samsung Electronics
5 * Kyungmin Park <kyungmin.park@samsung.com>
8 * Adrian Hunter <ext-adrian.hunter@nokia.com>:
9 * auto-placement support, read-while load support, various fixes
10 * Copyright (C) Nokia Corporation, 2007
12 * Rohit Hagargundgi <h.rohit at samsung.com>,
13 * Amul Kumar Saha <amul.saha@samsung.com>:
14 * Flex-OneNAND support
15 * Copyright (C) Samsung Electronics, 2009
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License version 2 as
19 * published by the Free Software Foundation.
24 #include <linux/compat.h>
25 #include <linux/mtd/mtd.h>
26 #include "linux/mtd/flashchip.h"
27 #include <linux/mtd/onenand.h>
30 #include <linux/errno.h>
33 /* It should access 16-bit instead of 8-bit */
34 static void *memcpy_16(void *dst, const void *src, unsigned int len)
47 * onenand_oob_128 - oob info for Flex-Onenand with 4KB page
48 * For now, we expose only 64 out of 80 ecc bytes
50 static struct nand_ecclayout onenand_oob_128 = {
53 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
54 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
55 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
56 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
57 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
58 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
62 {2, 4}, {18, 4}, {34, 4}, {50, 4},
63 {66, 4}, {82, 4}, {98, 4}, {114, 4}
68 * onenand_oob_64 - oob info for large (2KB) page
70 static struct nand_ecclayout onenand_oob_64 = {
79 {2, 3}, {14, 2}, {18, 3}, {30, 2},
80 {34, 3}, {46, 2}, {50, 3}, {62, 2}
85 * onenand_oob_32 - oob info for middle (1KB) page
87 static struct nand_ecclayout onenand_oob_32 = {
93 .oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
97 * Warning! This array is used with the memcpy_16() function, thus
98 * it must be aligned to 2 bytes. GCC can make this array unaligned
99 * as the array is made of unsigned char, which memcpy16() doesn't
100 * like and will cause unaligned access.
102 static const unsigned char __aligned(2) ffchars[] = {
103 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
104 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */
105 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
106 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */
107 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
108 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */
109 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
110 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */
111 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
112 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */
113 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
114 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */
115 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
116 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */
117 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
118 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */
122 * onenand_readw - [OneNAND Interface] Read OneNAND register
123 * @param addr address to read
125 * Read OneNAND register
127 static unsigned short onenand_readw(void __iomem * addr)
133 * onenand_writew - [OneNAND Interface] Write OneNAND register with value
134 * @param value value to write
135 * @param addr address to write
137 * Write OneNAND register with value
139 static void onenand_writew(unsigned short value, void __iomem * addr)
145 * onenand_block_address - [DEFAULT] Get block address
146 * @param device the device id
147 * @param block the block
148 * @return translated block address if DDP, otherwise same
150 * Setup Start Address 1 Register (F100h)
152 static int onenand_block_address(struct onenand_chip *this, int block)
154 /* Device Flash Core select, NAND Flash Block Address */
155 if (block & this->density_mask)
156 return ONENAND_DDP_CHIP1 | (block ^ this->density_mask);
162 * onenand_bufferram_address - [DEFAULT] Get bufferram address
163 * @param device the device id
164 * @param block the block
165 * @return set DBS value if DDP, otherwise 0
167 * Setup Start Address 2 Register (F101h) for DDP
169 static int onenand_bufferram_address(struct onenand_chip *this, int block)
171 /* Device BufferRAM Select */
172 if (block & this->density_mask)
173 return ONENAND_DDP_CHIP1;
175 return ONENAND_DDP_CHIP0;
179 * onenand_page_address - [DEFAULT] Get page address
180 * @param page the page address
181 * @param sector the sector address
182 * @return combined page and sector address
184 * Setup Start Address 8 Register (F107h)
186 static int onenand_page_address(int page, int sector)
188 /* Flash Page Address, Flash Sector Address */
191 fpa = page & ONENAND_FPA_MASK;
192 fsa = sector & ONENAND_FSA_MASK;
194 return ((fpa << ONENAND_FPA_SHIFT) | fsa);
198 * onenand_buffer_address - [DEFAULT] Get buffer address
199 * @param dataram1 DataRAM index
200 * @param sectors the sector address
201 * @param count the number of sectors
202 * @return the start buffer value
204 * Setup Start Buffer Register (F200h)
206 static int onenand_buffer_address(int dataram1, int sectors, int count)
210 /* BufferRAM Sector Address */
211 bsa = sectors & ONENAND_BSA_MASK;
214 bsa |= ONENAND_BSA_DATARAM1; /* DataRAM1 */
216 bsa |= ONENAND_BSA_DATARAM0; /* DataRAM0 */
218 /* BufferRAM Sector Count */
219 bsc = count & ONENAND_BSC_MASK;
221 return ((bsa << ONENAND_BSA_SHIFT) | bsc);
225 * flexonenand_block - Return block number for flash address
226 * @param this - OneNAND device structure
227 * @param addr - Address for which block number is needed
229 static unsigned int flexonenand_block(struct onenand_chip *this, loff_t addr)
231 unsigned int boundary, blk, die = 0;
233 if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) {
235 addr -= this->diesize[0];
238 boundary = this->boundary[die];
240 blk = addr >> (this->erase_shift - 1);
242 blk = (blk + boundary + 1) >> 1;
244 blk += die ? this->density_mask : 0;
248 unsigned int onenand_block(struct onenand_chip *this, loff_t addr)
250 if (!FLEXONENAND(this))
251 return addr >> this->erase_shift;
252 return flexonenand_block(this, addr);
256 * flexonenand_addr - Return address of the block
257 * @this: OneNAND device structure
258 * @block: Block number on Flex-OneNAND
260 * Return address of the block
262 static loff_t flexonenand_addr(struct onenand_chip *this, int block)
265 int die = 0, boundary;
267 if (ONENAND_IS_DDP(this) && block >= this->density_mask) {
268 block -= this->density_mask;
270 ofs = this->diesize[0];
273 boundary = this->boundary[die];
274 ofs += (loff_t) block << (this->erase_shift - 1);
275 if (block > (boundary + 1))
276 ofs += (loff_t) (block - boundary - 1)
277 << (this->erase_shift - 1);
281 loff_t onenand_addr(struct onenand_chip *this, int block)
283 if (!FLEXONENAND(this))
284 return (loff_t) block << this->erase_shift;
285 return flexonenand_addr(this, block);
289 * flexonenand_region - [Flex-OneNAND] Return erase region of addr
290 * @param mtd MTD device structure
291 * @param addr address whose erase region needs to be identified
293 int flexonenand_region(struct mtd_info *mtd, loff_t addr)
297 for (i = 0; i < mtd->numeraseregions; i++)
298 if (addr < mtd->eraseregions[i].offset)
304 * onenand_get_density - [DEFAULT] Get OneNAND density
305 * @param dev_id OneNAND device ID
307 * Get OneNAND density from device ID
309 static inline int onenand_get_density(int dev_id)
311 int density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
312 return (density & ONENAND_DEVICE_DENSITY_MASK);
316 * onenand_command - [DEFAULT] Send command to OneNAND device
317 * @param mtd MTD device structure
318 * @param cmd the command to be sent
319 * @param addr offset to read from or write to
320 * @param len number of bytes to read or write
322 * Send command to OneNAND device. This function is used for middle/large page
323 * devices (1KB/2KB Bytes per page)
325 static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
328 struct onenand_chip *this = mtd->priv;
332 /* Now we use page size operation */
333 int sectors = 0, count = 0;
335 /* Address translation */
337 case ONENAND_CMD_UNLOCK:
338 case ONENAND_CMD_LOCK:
339 case ONENAND_CMD_LOCK_TIGHT:
340 case ONENAND_CMD_UNLOCK_ALL:
345 case FLEXONENAND_CMD_PI_ACCESS:
346 /* addr contains die index */
347 block = addr * this->density_mask;
351 case ONENAND_CMD_ERASE:
352 case ONENAND_CMD_BUFFERRAM:
353 block = onenand_block(this, addr);
357 case FLEXONENAND_CMD_READ_PI:
358 cmd = ONENAND_CMD_READ;
359 block = addr * this->density_mask;
364 block = onenand_block(this, addr);
366 - onenand_addr(this, block)) >> this->page_shift;
367 page &= this->page_mask;
371 /* NOTE: The setting order of the registers is very important! */
372 if (cmd == ONENAND_CMD_BUFFERRAM) {
373 /* Select DataRAM for DDP */
374 value = onenand_bufferram_address(this, block);
375 this->write_word(value,
376 this->base + ONENAND_REG_START_ADDRESS2);
378 if (ONENAND_IS_4KB_PAGE(this))
379 ONENAND_SET_BUFFERRAM0(this);
381 /* Switch to the next data buffer */
382 ONENAND_SET_NEXT_BUFFERRAM(this);
388 /* Write 'DFS, FBA' of Flash */
389 value = onenand_block_address(this, block);
390 this->write_word(value,
391 this->base + ONENAND_REG_START_ADDRESS1);
393 /* Select DataRAM for DDP */
394 value = onenand_bufferram_address(this, block);
395 this->write_word(value,
396 this->base + ONENAND_REG_START_ADDRESS2);
403 case FLEXONENAND_CMD_RECOVER_LSB:
404 case ONENAND_CMD_READ:
405 case ONENAND_CMD_READOOB:
406 if (ONENAND_IS_4KB_PAGE(this))
407 dataram = ONENAND_SET_BUFFERRAM0(this);
409 dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
414 dataram = ONENAND_CURRENT_BUFFERRAM(this);
418 /* Write 'FPA, FSA' of Flash */
419 value = onenand_page_address(page, sectors);
420 this->write_word(value,
421 this->base + ONENAND_REG_START_ADDRESS8);
423 /* Write 'BSA, BSC' of DataRAM */
424 value = onenand_buffer_address(dataram, sectors, count);
425 this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
428 /* Interrupt clear */
429 this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT);
431 this->write_word(cmd, this->base + ONENAND_REG_COMMAND);
437 * onenand_read_ecc - return ecc status
438 * @param this onenand chip structure
440 static int onenand_read_ecc(struct onenand_chip *this)
444 if (!FLEXONENAND(this))
445 return this->read_word(this->base + ONENAND_REG_ECC_STATUS);
447 for (i = 0; i < 4; i++) {
448 ecc = this->read_word(this->base
449 + ((ONENAND_REG_ECC_STATUS + i) << 1));
452 if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR)
453 return ONENAND_ECC_2BIT_ALL;
460 * onenand_wait - [DEFAULT] wait until the command is done
461 * @param mtd MTD device structure
462 * @param state state to select the max. timeout value
464 * Wait for command done. This applies to all OneNAND command
465 * Read can take up to 30us, erase up to 2ms and program up to 350us
466 * according to general OneNAND specs
468 static int onenand_wait(struct mtd_info *mtd, int state)
470 struct onenand_chip *this = mtd->priv;
471 unsigned int interrupt = 0;
474 /* Wait at most 20ms ... */
475 u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
476 u32 time_start = get_timer(0);
479 if (get_timer(time_start) > timeo)
481 interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
482 } while ((interrupt & ONENAND_INT_MASTER) == 0);
484 ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
486 if (interrupt & ONENAND_INT_READ) {
487 int ecc = onenand_read_ecc(this);
488 if (ecc & ONENAND_ECC_2BIT_ALL) {
489 printk("onenand_wait: ECC error = 0x%04x\n", ecc);
494 if (ctrl & ONENAND_CTRL_ERROR) {
495 printk("onenand_wait: controller error = 0x%04x\n", ctrl);
496 if (ctrl & ONENAND_CTRL_LOCK)
497 printk("onenand_wait: it's locked error = 0x%04x\n",
508 * onenand_bufferram_offset - [DEFAULT] BufferRAM offset
509 * @param mtd MTD data structure
510 * @param area BufferRAM area
511 * @return offset given area
513 * Return BufferRAM offset given area
515 static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
517 struct onenand_chip *this = mtd->priv;
519 if (ONENAND_CURRENT_BUFFERRAM(this)) {
520 if (area == ONENAND_DATARAM)
521 return mtd->writesize;
522 if (area == ONENAND_SPARERAM)
530 * onenand_read_bufferram - [OneNAND Interface] Read the bufferram area
531 * @param mtd MTD data structure
532 * @param area BufferRAM area
533 * @param buffer the databuffer to put/get data
534 * @param offset offset to read from or write to
535 * @param count number of bytes to read/write
537 * Read the BufferRAM area
539 static int onenand_read_bufferram(struct mtd_info *mtd, loff_t addr, int area,
540 unsigned char *buffer, int offset,
543 struct onenand_chip *this = mtd->priv;
544 void __iomem *bufferram;
546 bufferram = this->base + area;
547 bufferram += onenand_bufferram_offset(mtd, area);
549 memcpy_16(buffer, bufferram + offset, count);
555 * onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode
556 * @param mtd MTD data structure
557 * @param area BufferRAM area
558 * @param buffer the databuffer to put/get data
559 * @param offset offset to read from or write to
560 * @param count number of bytes to read/write
562 * Read the BufferRAM area with Sync. Burst Mode
564 static int onenand_sync_read_bufferram(struct mtd_info *mtd, loff_t addr, int area,
565 unsigned char *buffer, int offset,
568 struct onenand_chip *this = mtd->priv;
569 void __iomem *bufferram;
571 bufferram = this->base + area;
572 bufferram += onenand_bufferram_offset(mtd, area);
574 this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ);
576 memcpy_16(buffer, bufferram + offset, count);
578 this->mmcontrol(mtd, 0);
584 * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area
585 * @param mtd MTD data structure
586 * @param area BufferRAM area
587 * @param buffer the databuffer to put/get data
588 * @param offset offset to read from or write to
589 * @param count number of bytes to read/write
591 * Write the BufferRAM area
593 static int onenand_write_bufferram(struct mtd_info *mtd, loff_t addr, int area,
594 const unsigned char *buffer, int offset,
597 struct onenand_chip *this = mtd->priv;
598 void __iomem *bufferram;
600 bufferram = this->base + area;
601 bufferram += onenand_bufferram_offset(mtd, area);
603 memcpy_16(bufferram + offset, buffer, count);
609 * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
610 * @param mtd MTD data structure
611 * @param addr address to check
612 * @return blockpage address
614 * Get blockpage address at 2x program mode
616 static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
618 struct onenand_chip *this = mtd->priv;
619 int blockpage, block, page;
621 /* Calculate the even block number */
622 block = (int) (addr >> this->erase_shift) & ~1;
623 /* Is it the odd plane? */
624 if (addr & this->writesize)
626 page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
627 blockpage = (block << 7) | page;
633 * onenand_check_bufferram - [GENERIC] Check BufferRAM information
634 * @param mtd MTD data structure
635 * @param addr address to check
636 * @return 1 if there are valid data, otherwise 0
638 * Check bufferram if there is data we required
640 static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
642 struct onenand_chip *this = mtd->priv;
643 int blockpage, found = 0;
646 if (ONENAND_IS_2PLANE(this))
647 blockpage = onenand_get_2x_blockpage(mtd, addr);
649 blockpage = (int) (addr >> this->page_shift);
651 /* Is there valid data? */
652 i = ONENAND_CURRENT_BUFFERRAM(this);
653 if (this->bufferram[i].blockpage == blockpage)
656 /* Check another BufferRAM */
657 i = ONENAND_NEXT_BUFFERRAM(this);
658 if (this->bufferram[i].blockpage == blockpage) {
659 ONENAND_SET_NEXT_BUFFERRAM(this);
664 if (found && ONENAND_IS_DDP(this)) {
665 /* Select DataRAM for DDP */
666 int block = onenand_block(this, addr);
667 int value = onenand_bufferram_address(this, block);
668 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
675 * onenand_update_bufferram - [GENERIC] Update BufferRAM information
676 * @param mtd MTD data structure
677 * @param addr address to update
678 * @param valid valid flag
680 * Update BufferRAM information
682 static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
685 struct onenand_chip *this = mtd->priv;
689 if (ONENAND_IS_2PLANE(this))
690 blockpage = onenand_get_2x_blockpage(mtd, addr);
692 blockpage = (int)(addr >> this->page_shift);
694 /* Invalidate another BufferRAM */
695 i = ONENAND_NEXT_BUFFERRAM(this);
696 if (this->bufferram[i].blockpage == blockpage)
697 this->bufferram[i].blockpage = -1;
699 /* Update BufferRAM */
700 i = ONENAND_CURRENT_BUFFERRAM(this);
702 this->bufferram[i].blockpage = blockpage;
704 this->bufferram[i].blockpage = -1;
710 * onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
711 * @param mtd MTD data structure
712 * @param addr start address to invalidate
713 * @param len length to invalidate
715 * Invalidate BufferRAM information
717 static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,
720 struct onenand_chip *this = mtd->priv;
722 loff_t end_addr = addr + len;
724 /* Invalidate BufferRAM */
725 for (i = 0; i < MAX_BUFFERRAM; i++) {
726 loff_t buf_addr = this->bufferram[i].blockpage << this->page_shift;
728 if (buf_addr >= addr && buf_addr < end_addr)
729 this->bufferram[i].blockpage = -1;
734 * onenand_get_device - [GENERIC] Get chip for selected access
735 * @param mtd MTD device structure
736 * @param new_state the state which is requested
738 * Get the device and lock it for exclusive access
740 static void onenand_get_device(struct mtd_info *mtd, int new_state)
746 * onenand_release_device - [GENERIC] release chip
747 * @param mtd MTD device structure
749 * Deselect, release chip lock and wake up anyone waiting on the device
751 static void onenand_release_device(struct mtd_info *mtd)
757 * onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer
758 * @param mtd MTD device structure
759 * @param buf destination address
760 * @param column oob offset to read from
761 * @param thislen oob length to read
763 static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf,
764 int column, int thislen)
766 struct onenand_chip *this = mtd->priv;
767 struct nand_oobfree *free;
768 int readcol = column;
769 int readend = column + thislen;
772 uint8_t *oob_buf = this->oob_buf;
774 free = this->ecclayout->oobfree;
775 for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
777 if (readcol >= lastgap)
778 readcol += free->offset - lastgap;
779 if (readend >= lastgap)
780 readend += free->offset - lastgap;
781 lastgap = free->offset + free->length;
783 this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
784 free = this->ecclayout->oobfree;
785 for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
787 int free_end = free->offset + free->length;
788 if (free->offset < readend && free_end > readcol) {
789 int st = max_t(int,free->offset,readcol);
790 int ed = min_t(int,free_end,readend);
792 memcpy(buf, oob_buf + st, n);
794 } else if (column == 0)
801 * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data
802 * @param mtd MTD device structure
803 * @param addr address to recover
804 * @param status return value from onenand_wait
806 * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has
807 * lower page address and MSB page has higher page address in paired pages.
808 * If power off occurs during MSB page program, the paired LSB page data can
809 * become corrupt. LSB page recovery read is a way to read LSB page though page
810 * data are corrupted. When uncorrectable error occurs as a result of LSB page
811 * read after power up, issue LSB page recovery read.
813 static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
815 struct onenand_chip *this = mtd->priv;
818 /* Recovery is only for Flex-OneNAND */
819 if (!FLEXONENAND(this))
822 /* check if we failed due to uncorrectable error */
823 if (!mtd_is_eccerr(status) && status != ONENAND_BBT_READ_ECC_ERROR)
826 /* check if address lies in MLC region */
827 i = flexonenand_region(mtd, addr);
828 if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift))
831 printk("onenand_recover_lsb:"
832 "Attempting to recover from uncorrectable read\n");
834 /* Issue the LSB page recovery command */
835 this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize);
836 return this->wait(mtd, FL_READING);
840 * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
841 * @param mtd MTD device structure
842 * @param from offset to read from
843 * @param ops oob operation description structure
845 * OneNAND read main and/or out-of-band data
847 static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
848 struct mtd_oob_ops *ops)
850 struct onenand_chip *this = mtd->priv;
851 struct mtd_ecc_stats stats;
852 size_t len = ops->len;
853 size_t ooblen = ops->ooblen;
854 u_char *buf = ops->datbuf;
855 u_char *oobbuf = ops->oobbuf;
856 int read = 0, column, thislen;
857 int oobread = 0, oobcolumn, thisooblen, oobsize;
858 int ret = 0, boundary = 0;
859 int writesize = this->writesize;
861 pr_debug("onenand_read_ops_nolock: from = 0x%08x, len = %i\n",
862 (unsigned int) from, (int) len);
864 if (ops->mode == MTD_OPS_AUTO_OOB)
865 oobsize = this->ecclayout->oobavail;
867 oobsize = mtd->oobsize;
869 oobcolumn = from & (mtd->oobsize - 1);
871 /* Do not allow reads past end of device */
872 if ((from + len) > mtd->size) {
873 printk(KERN_ERR "onenand_read_ops_nolock: Attempt read beyond end of device\n");
879 stats = mtd->ecc_stats;
881 /* Read-while-load method */
882 /* Note: We can't use this feature in MLC */
884 /* Do first load to bufferRAM */
886 if (!onenand_check_bufferram(mtd, from)) {
887 this->main_buf = buf;
888 this->command(mtd, ONENAND_CMD_READ, from, writesize);
889 ret = this->wait(mtd, FL_READING);
891 ret = onenand_recover_lsb(mtd, from, ret);
892 onenand_update_bufferram(mtd, from, !ret);
898 thislen = min_t(int, writesize, len - read);
899 column = from & (writesize - 1);
900 if (column + thislen > writesize)
901 thislen = writesize - column;
904 /* If there is more to load then start next load */
906 if (!ONENAND_IS_4KB_PAGE(this) && read + thislen < len) {
907 this->main_buf = buf + thislen;
908 this->command(mtd, ONENAND_CMD_READ, from, writesize);
910 * Chip boundary handling in DDP
911 * Now we issued chip 1 read and pointed chip 1
912 * bufferam so we have to point chip 0 bufferam.
914 if (ONENAND_IS_DDP(this) &&
915 unlikely(from == (this->chipsize >> 1))) {
916 this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
920 ONENAND_SET_PREV_BUFFERRAM(this);
923 /* While load is going, read from last bufferRAM */
924 this->read_bufferram(mtd, from - thislen, ONENAND_DATARAM, buf, column, thislen);
926 /* Read oob area if needed */
928 thisooblen = oobsize - oobcolumn;
929 thisooblen = min_t(int, thisooblen, ooblen - oobread);
931 if (ops->mode == MTD_OPS_AUTO_OOB)
932 onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
934 this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
935 oobread += thisooblen;
936 oobbuf += thisooblen;
940 if (ONENAND_IS_4KB_PAGE(this) && (read + thislen < len)) {
941 this->command(mtd, ONENAND_CMD_READ, from, writesize);
942 ret = this->wait(mtd, FL_READING);
944 ret = onenand_recover_lsb(mtd, from, ret);
945 onenand_update_bufferram(mtd, from, !ret);
946 if (mtd_is_eccerr(ret))
950 /* See if we are done */
954 /* Set up for next read from bufferRAM */
955 if (unlikely(boundary))
956 this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
957 if (!ONENAND_IS_4KB_PAGE(this))
958 ONENAND_SET_NEXT_BUFFERRAM(this);
960 thislen = min_t(int, writesize, len - read);
963 if (!ONENAND_IS_4KB_PAGE(this)) {
964 /* Now wait for load */
965 ret = this->wait(mtd, FL_READING);
966 onenand_update_bufferram(mtd, from, !ret);
967 if (mtd_is_eccerr(ret))
973 * Return success, if no ECC failures, else -EBADMSG
974 * fs driver will take care of that, because
975 * retlen == desired len and result == -EBADMSG
978 ops->oobretlen = oobread;
983 if (mtd->ecc_stats.failed - stats.failed)
986 /* return max bitflips per ecc step; ONENANDs correct 1 bit only */
987 return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0;
991 * onenand_read_oob_nolock - [MTD Interface] OneNAND read out-of-band
992 * @param mtd MTD device structure
993 * @param from offset to read from
994 * @param ops oob operation description structure
996 * OneNAND read out-of-band data from the spare area
998 static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
999 struct mtd_oob_ops *ops)
1001 struct onenand_chip *this = mtd->priv;
1002 struct mtd_ecc_stats stats;
1003 int read = 0, thislen, column, oobsize;
1004 size_t len = ops->ooblen;
1005 unsigned int mode = ops->mode;
1006 u_char *buf = ops->oobbuf;
1007 int ret = 0, readcmd;
1009 from += ops->ooboffs;
1011 pr_debug("onenand_read_oob_nolock: from = 0x%08x, len = %i\n",
1012 (unsigned int) from, (int) len);
1014 /* Initialize return length value */
1017 if (mode == MTD_OPS_AUTO_OOB)
1018 oobsize = this->ecclayout->oobavail;
1020 oobsize = mtd->oobsize;
1022 column = from & (mtd->oobsize - 1);
1024 if (unlikely(column >= oobsize)) {
1025 printk(KERN_ERR "onenand_read_oob_nolock: Attempted to start read outside oob\n");
1029 /* Do not allow reads past end of device */
1030 if (unlikely(from >= mtd->size ||
1031 column + len > ((mtd->size >> this->page_shift) -
1032 (from >> this->page_shift)) * oobsize)) {
1033 printk(KERN_ERR "onenand_read_oob_nolock: Attempted to read beyond end of device\n");
1037 stats = mtd->ecc_stats;
1039 readcmd = ONENAND_IS_4KB_PAGE(this) ?
1040 ONENAND_CMD_READ : ONENAND_CMD_READOOB;
1042 while (read < len) {
1043 thislen = oobsize - column;
1044 thislen = min_t(int, thislen, len);
1046 this->spare_buf = buf;
1047 this->command(mtd, readcmd, from, mtd->oobsize);
1049 onenand_update_bufferram(mtd, from, 0);
1051 ret = this->wait(mtd, FL_READING);
1053 ret = onenand_recover_lsb(mtd, from, ret);
1055 if (ret && ret != -EBADMSG) {
1056 printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret);
1060 if (mode == MTD_OPS_AUTO_OOB)
1061 onenand_transfer_auto_oob(mtd, buf, column, thislen);
1063 this->read_bufferram(mtd, 0, ONENAND_SPARERAM, buf, column, thislen);
1075 from += mtd->writesize;
1080 ops->oobretlen = read;
1085 if (mtd->ecc_stats.failed - stats.failed)
1092 * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc
1093 * @param mtd MTD device structure
1094 * @param from offset to read from
1095 * @param len number of bytes to read
1096 * @param retlen pointer to variable to store the number of read bytes
1097 * @param buf the databuffer to put data
1099 * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL
1101 int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
1102 size_t * retlen, u_char * buf)
1104 struct mtd_oob_ops ops = {
1112 onenand_get_device(mtd, FL_READING);
1113 ret = onenand_read_ops_nolock(mtd, from, &ops);
1114 onenand_release_device(mtd);
1116 *retlen = ops.retlen;
1121 * onenand_read_oob - [MTD Interface] OneNAND read out-of-band
1122 * @param mtd MTD device structure
1123 * @param from offset to read from
1124 * @param ops oob operations description structure
1126 * OneNAND main and/or out-of-band
1128 int onenand_read_oob(struct mtd_info *mtd, loff_t from,
1129 struct mtd_oob_ops *ops)
1133 switch (ops->mode) {
1134 case MTD_OPS_PLACE_OOB:
1135 case MTD_OPS_AUTO_OOB:
1138 /* Not implemented yet */
1143 onenand_get_device(mtd, FL_READING);
1145 ret = onenand_read_ops_nolock(mtd, from, ops);
1147 ret = onenand_read_oob_nolock(mtd, from, ops);
1148 onenand_release_device(mtd);
1154 * onenand_bbt_wait - [DEFAULT] wait until the command is done
1155 * @param mtd MTD device structure
1156 * @param state state to select the max. timeout value
1158 * Wait for command done.
1160 static int onenand_bbt_wait(struct mtd_info *mtd, int state)
1162 struct onenand_chip *this = mtd->priv;
1163 unsigned int interrupt;
1166 /* Wait at most 20ms ... */
1167 u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
1168 u32 time_start = get_timer(0);
1171 if (get_timer(time_start) > timeo)
1172 return ONENAND_BBT_READ_FATAL_ERROR;
1173 interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
1174 } while ((interrupt & ONENAND_INT_MASTER) == 0);
1176 /* To get correct interrupt status in timeout case */
1177 interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
1178 ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
1180 if (interrupt & ONENAND_INT_READ) {
1181 int ecc = onenand_read_ecc(this);
1182 if (ecc & ONENAND_ECC_2BIT_ALL) {
1183 printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
1184 ", controller = 0x%04x\n", ecc, ctrl);
1185 return ONENAND_BBT_READ_ERROR;
1188 printk(KERN_ERR "onenand_bbt_wait: read timeout!"
1189 "ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
1190 return ONENAND_BBT_READ_FATAL_ERROR;
1193 /* Initial bad block case: 0x2400 or 0x0400 */
1194 if (ctrl & ONENAND_CTRL_ERROR) {
1195 printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl);
1196 return ONENAND_BBT_READ_ERROR;
1203 * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
1204 * @param mtd MTD device structure
1205 * @param from offset to read from
1206 * @param ops oob operation description structure
1208 * OneNAND read out-of-band data from the spare area for bbt scan
1210 int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
1211 struct mtd_oob_ops *ops)
1213 struct onenand_chip *this = mtd->priv;
1214 int read = 0, thislen, column;
1215 int ret = 0, readcmd;
1216 size_t len = ops->ooblen;
1217 u_char *buf = ops->oobbuf;
1219 pr_debug("onenand_bbt_read_oob: from = 0x%08x, len = %zi\n",
1220 (unsigned int) from, len);
1222 readcmd = ONENAND_IS_4KB_PAGE(this) ?
1223 ONENAND_CMD_READ : ONENAND_CMD_READOOB;
1225 /* Initialize return value */
1228 /* Do not allow reads past end of device */
1229 if (unlikely((from + len) > mtd->size)) {
1230 printk(KERN_ERR "onenand_bbt_read_oob: Attempt read beyond end of device\n");
1231 return ONENAND_BBT_READ_FATAL_ERROR;
1234 /* Grab the lock and see if the device is available */
1235 onenand_get_device(mtd, FL_READING);
1237 column = from & (mtd->oobsize - 1);
1239 while (read < len) {
1241 thislen = mtd->oobsize - column;
1242 thislen = min_t(int, thislen, len);
1244 this->spare_buf = buf;
1245 this->command(mtd, readcmd, from, mtd->oobsize);
1247 onenand_update_bufferram(mtd, from, 0);
1249 ret = this->bbt_wait(mtd, FL_READING);
1251 ret = onenand_recover_lsb(mtd, from, ret);
1256 this->read_bufferram(mtd, 0, ONENAND_SPARERAM, buf, column, thislen);
1265 /* Update Page size */
1266 from += this->writesize;
1271 /* Deselect and wake up anyone waiting on the device */
1272 onenand_release_device(mtd);
1274 ops->oobretlen = read;
1279 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
1281 * onenand_verify_oob - [GENERIC] verify the oob contents after a write
1282 * @param mtd MTD device structure
1283 * @param buf the databuffer to verify
1284 * @param to offset to read from
1286 static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
1288 struct onenand_chip *this = mtd->priv;
1289 u_char *oob_buf = this->oob_buf;
1290 int status, i, readcmd;
1292 readcmd = ONENAND_IS_4KB_PAGE(this) ?
1293 ONENAND_CMD_READ : ONENAND_CMD_READOOB;
1295 this->command(mtd, readcmd, to, mtd->oobsize);
1296 onenand_update_bufferram(mtd, to, 0);
1297 status = this->wait(mtd, FL_READING);
1301 this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
1302 for (i = 0; i < mtd->oobsize; i++)
1303 if (buf[i] != 0xFF && buf[i] != oob_buf[i])
1310 * onenand_verify - [GENERIC] verify the chip contents after a write
1311 * @param mtd MTD device structure
1312 * @param buf the databuffer to verify
1313 * @param addr offset to read from
1314 * @param len number of bytes to read and compare
1316 static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len)
1318 struct onenand_chip *this = mtd->priv;
1319 void __iomem *dataram;
1321 int thislen, column;
1324 thislen = min_t(int, this->writesize, len);
1325 column = addr & (this->writesize - 1);
1326 if (column + thislen > this->writesize)
1327 thislen = this->writesize - column;
1329 this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
1331 onenand_update_bufferram(mtd, addr, 0);
1333 ret = this->wait(mtd, FL_READING);
1337 onenand_update_bufferram(mtd, addr, 1);
1339 dataram = this->base + ONENAND_DATARAM;
1340 dataram += onenand_bufferram_offset(mtd, ONENAND_DATARAM);
1342 if (memcmp(buf, dataram + column, thislen))
1353 #define onenand_verify(...) (0)
1354 #define onenand_verify_oob(...) (0)
1357 #define NOTALIGNED(x) ((x & (this->subpagesize - 1)) != 0)
1360 * onenand_fill_auto_oob - [INTERN] oob auto-placement transfer
1361 * @param mtd MTD device structure
1362 * @param oob_buf oob buffer
1363 * @param buf source address
1364 * @param column oob offset to write to
1365 * @param thislen oob length to write
1367 static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
1368 const u_char *buf, int column, int thislen)
1370 struct onenand_chip *this = mtd->priv;
1371 struct nand_oobfree *free;
1372 int writecol = column;
1373 int writeend = column + thislen;
1377 free = this->ecclayout->oobfree;
1378 for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
1380 if (writecol >= lastgap)
1381 writecol += free->offset - lastgap;
1382 if (writeend >= lastgap)
1383 writeend += free->offset - lastgap;
1384 lastgap = free->offset + free->length;
1386 free = this->ecclayout->oobfree;
1387 for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
1389 int free_end = free->offset + free->length;
1390 if (free->offset < writeend && free_end > writecol) {
1391 int st = max_t(int,free->offset,writecol);
1392 int ed = min_t(int,free_end,writeend);
1394 memcpy(oob_buf + st, buf, n);
1396 } else if (column == 0)
1403 * onenand_write_ops_nolock - [OneNAND Interface] write main and/or out-of-band
1404 * @param mtd MTD device structure
1405 * @param to offset to write to
1406 * @param ops oob operation description structure
1408 * Write main and/or oob with ECC
1410 static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
1411 struct mtd_oob_ops *ops)
1413 struct onenand_chip *this = mtd->priv;
1414 int written = 0, column, thislen, subpage;
1415 int oobwritten = 0, oobcolumn, thisooblen, oobsize;
1416 size_t len = ops->len;
1417 size_t ooblen = ops->ooblen;
1418 const u_char *buf = ops->datbuf;
1419 const u_char *oob = ops->oobbuf;
1423 pr_debug("onenand_write_ops_nolock: to = 0x%08x, len = %i\n",
1424 (unsigned int) to, (int) len);
1426 /* Initialize retlen, in case of early exit */
1430 /* Reject writes, which are not page aligned */
1431 if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
1432 printk(KERN_ERR "onenand_write_ops_nolock: Attempt to write not page aligned data\n");
1436 if (ops->mode == MTD_OPS_AUTO_OOB)
1437 oobsize = this->ecclayout->oobavail;
1439 oobsize = mtd->oobsize;
1441 oobcolumn = to & (mtd->oobsize - 1);
1443 column = to & (mtd->writesize - 1);
1445 /* Loop until all data write */
1446 while (written < len) {
1447 u_char *wbuf = (u_char *) buf;
1449 thislen = min_t(int, mtd->writesize - column, len - written);
1450 thisooblen = min_t(int, oobsize - oobcolumn, ooblen - oobwritten);
1452 this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
1454 /* Partial page write */
1455 subpage = thislen < mtd->writesize;
1457 memset(this->page_buf, 0xff, mtd->writesize);
1458 memcpy(this->page_buf + column, buf, thislen);
1459 wbuf = this->page_buf;
1462 this->write_bufferram(mtd, to, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
1465 oobbuf = this->oob_buf;
1467 /* We send data to spare ram with oobsize
1468 * * to prevent byte access */
1469 memset(oobbuf, 0xff, mtd->oobsize);
1470 if (ops->mode == MTD_OPS_AUTO_OOB)
1471 onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
1473 memcpy(oobbuf + oobcolumn, oob, thisooblen);
1475 oobwritten += thisooblen;
1479 oobbuf = (u_char *) ffchars;
1481 this->write_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
1483 this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
1485 ret = this->wait(mtd, FL_WRITING);
1487 /* In partial page write we don't update bufferram */
1488 onenand_update_bufferram(mtd, to, !ret && !subpage);
1489 if (ONENAND_IS_2PLANE(this)) {
1490 ONENAND_SET_BUFFERRAM1(this);
1491 onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
1495 printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
1499 /* Only check verify write turn on */
1500 ret = onenand_verify(mtd, buf, to, thislen);
1502 printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret);
1516 ops->retlen = written;
1522 * onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band
1523 * @param mtd MTD device structure
1524 * @param to offset to write to
1525 * @param len number of bytes to write
1526 * @param retlen pointer to variable to store the number of written bytes
1527 * @param buf the data to write
1528 * @param mode operation mode
1530 * OneNAND write out-of-band
1532 static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
1533 struct mtd_oob_ops *ops)
1535 struct onenand_chip *this = mtd->priv;
1536 int column, ret = 0, oobsize;
1537 int written = 0, oobcmd;
1539 size_t len = ops->ooblen;
1540 const u_char *buf = ops->oobbuf;
1541 unsigned int mode = ops->mode;
1545 pr_debug("onenand_write_oob_nolock: to = 0x%08x, len = %i\n",
1546 (unsigned int) to, (int) len);
1548 /* Initialize retlen, in case of early exit */
1551 if (mode == MTD_OPS_AUTO_OOB)
1552 oobsize = this->ecclayout->oobavail;
1554 oobsize = mtd->oobsize;
1556 column = to & (mtd->oobsize - 1);
1558 if (unlikely(column >= oobsize)) {
1559 printk(KERN_ERR "onenand_write_oob_nolock: Attempted to start write outside oob\n");
1563 /* For compatibility with NAND: Do not allow write past end of page */
1564 if (unlikely(column + len > oobsize)) {
1565 printk(KERN_ERR "onenand_write_oob_nolock: "
1566 "Attempt to write past end of page\n");
1570 /* Do not allow reads past end of device */
1571 if (unlikely(to >= mtd->size ||
1572 column + len > ((mtd->size >> this->page_shift) -
1573 (to >> this->page_shift)) * oobsize)) {
1574 printk(KERN_ERR "onenand_write_oob_nolock: Attempted to write past end of device\n");
1578 oobbuf = this->oob_buf;
1580 oobcmd = ONENAND_IS_4KB_PAGE(this) ?
1581 ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB;
1583 /* Loop until all data write */
1584 while (written < len) {
1585 int thislen = min_t(int, oobsize, len - written);
1587 this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
1589 /* We send data to spare ram with oobsize
1590 * to prevent byte access */
1591 memset(oobbuf, 0xff, mtd->oobsize);
1592 if (mode == MTD_OPS_AUTO_OOB)
1593 onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
1595 memcpy(oobbuf + column, buf, thislen);
1596 this->write_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
1598 if (ONENAND_IS_4KB_PAGE(this)) {
1599 /* Set main area of DataRAM to 0xff*/
1600 memset(this->page_buf, 0xff, mtd->writesize);
1601 this->write_bufferram(mtd, 0, ONENAND_DATARAM,
1602 this->page_buf, 0, mtd->writesize);
1605 this->command(mtd, oobcmd, to, mtd->oobsize);
1607 onenand_update_bufferram(mtd, to, 0);
1608 if (ONENAND_IS_2PLANE(this)) {
1609 ONENAND_SET_BUFFERRAM1(this);
1610 onenand_update_bufferram(mtd, to + this->writesize, 0);
1613 ret = this->wait(mtd, FL_WRITING);
1615 printk(KERN_ERR "onenand_write_oob_nolock: write failed %d\n", ret);
1619 ret = onenand_verify_oob(mtd, oobbuf, to);
1621 printk(KERN_ERR "onenand_write_oob_nolock: verify failed %d\n", ret);
1629 to += mtd->writesize;
1634 ops->oobretlen = written;
1640 * onenand_write - [MTD Interface] compability function for onenand_write_ecc
1641 * @param mtd MTD device structure
1642 * @param to offset to write to
1643 * @param len number of bytes to write
1644 * @param retlen pointer to variable to store the number of written bytes
1645 * @param buf the data to write
1649 int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
1650 size_t * retlen, const u_char * buf)
1652 struct mtd_oob_ops ops = {
1655 .datbuf = (u_char *) buf,
1660 onenand_get_device(mtd, FL_WRITING);
1661 ret = onenand_write_ops_nolock(mtd, to, &ops);
1662 onenand_release_device(mtd);
1664 *retlen = ops.retlen;
1669 * onenand_write_oob - [MTD Interface] OneNAND write out-of-band
1670 * @param mtd MTD device structure
1671 * @param to offset to write to
1672 * @param ops oob operation description structure
1674 * OneNAND write main and/or out-of-band
1676 int onenand_write_oob(struct mtd_info *mtd, loff_t to,
1677 struct mtd_oob_ops *ops)
1681 switch (ops->mode) {
1682 case MTD_OPS_PLACE_OOB:
1683 case MTD_OPS_AUTO_OOB:
1686 /* Not implemented yet */
1691 onenand_get_device(mtd, FL_WRITING);
1693 ret = onenand_write_ops_nolock(mtd, to, ops);
1695 ret = onenand_write_oob_nolock(mtd, to, ops);
1696 onenand_release_device(mtd);
1703 * onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad
1704 * @param mtd MTD device structure
1705 * @param ofs offset from device start
1706 * @param allowbbt 1, if its allowed to access the bbt area
1708 * Check, if the block is bad, Either by reading the bad block table or
1709 * calling of the scan function.
1711 static int onenand_block_isbad_nolock(struct mtd_info *mtd, loff_t ofs, int allowbbt)
1713 struct onenand_chip *this = mtd->priv;
1714 struct bbm_info *bbm = this->bbm;
1716 /* Return info from the table */
1717 return bbm->isbad_bbt(mtd, ofs, allowbbt);
1722 * onenand_erase - [MTD Interface] erase block(s)
1723 * @param mtd MTD device structure
1724 * @param instr erase instruction
1726 * Erase one ore more blocks
1728 int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
1730 struct onenand_chip *this = mtd->priv;
1731 unsigned int block_size;
1732 loff_t addr = instr->addr;
1733 unsigned int len = instr->len;
1735 struct mtd_erase_region_info *region = NULL;
1736 unsigned int region_end = 0;
1738 pr_debug("onenand_erase: start = 0x%08x, len = %i\n",
1739 (unsigned int) addr, len);
1741 if (FLEXONENAND(this)) {
1742 /* Find the eraseregion of this address */
1743 i = flexonenand_region(mtd, addr);
1744 region = &mtd->eraseregions[i];
1746 block_size = region->erasesize;
1747 region_end = region->offset
1748 + region->erasesize * region->numblocks;
1750 /* Start address within region must align on block boundary.
1751 * Erase region's start offset is always block start address.
1753 if (unlikely((addr - region->offset) & (block_size - 1))) {
1754 pr_debug("onenand_erase:" " Unaligned address\n");
1758 block_size = 1 << this->erase_shift;
1760 /* Start address must align on block boundary */
1761 if (unlikely(addr & (block_size - 1))) {
1762 pr_debug("onenand_erase:" "Unaligned address\n");
1767 /* Length must align on block boundary */
1768 if (unlikely(len & (block_size - 1))) {
1769 pr_debug("onenand_erase: Length not block aligned\n");
1773 /* Grab the lock and see if the device is available */
1774 onenand_get_device(mtd, FL_ERASING);
1776 /* Loop throught the pages */
1777 instr->state = MTD_ERASING;
1781 /* Check if we have a bad block, we do not erase bad blocks */
1782 if (instr->priv == 0 && onenand_block_isbad_nolock(mtd, addr, 0)) {
1783 printk(KERN_WARNING "onenand_erase: attempt to erase"
1784 " a bad block at addr 0x%08x\n",
1785 (unsigned int) addr);
1786 instr->state = MTD_ERASE_FAILED;
1790 this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
1792 onenand_invalidate_bufferram(mtd, addr, block_size);
1794 ret = this->wait(mtd, FL_ERASING);
1795 /* Check, if it is write protected */
1798 pr_debug("onenand_erase: "
1799 "Device is write protected!!!\n");
1801 pr_debug("onenand_erase: "
1802 "Failed erase, block %d\n",
1803 onenand_block(this, addr));
1804 instr->state = MTD_ERASE_FAILED;
1805 instr->fail_addr = addr;
1813 if (addr == region_end) {
1818 block_size = region->erasesize;
1819 region_end = region->offset
1820 + region->erasesize * region->numblocks;
1822 if (len & (block_size - 1)) {
1823 /* This has been checked at MTD
1824 * partitioning level. */
1825 printk("onenand_erase: Unaligned address\n");
1831 instr->state = MTD_ERASE_DONE;
1835 ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
1836 /* Do call back function */
1838 mtd_erase_callback(instr);
1840 /* Deselect and wake up anyone waiting on the device */
1841 onenand_release_device(mtd);
1847 * onenand_sync - [MTD Interface] sync
1848 * @param mtd MTD device structure
1850 * Sync is actually a wait for chip ready function
1852 void onenand_sync(struct mtd_info *mtd)
1854 pr_debug("onenand_sync: called\n");
1856 /* Grab the lock and see if the device is available */
1857 onenand_get_device(mtd, FL_SYNCING);
1859 /* Release it and go back */
1860 onenand_release_device(mtd);
1864 * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
1865 * @param mtd MTD device structure
1866 * @param ofs offset relative to mtd start
1868 * Check whether the block is bad
1870 int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
1874 /* Check for invalid offset */
1875 if (ofs > mtd->size)
1878 onenand_get_device(mtd, FL_READING);
1879 ret = onenand_block_isbad_nolock(mtd,ofs, 0);
1880 onenand_release_device(mtd);
1885 * onenand_default_block_markbad - [DEFAULT] mark a block bad
1886 * @param mtd MTD device structure
1887 * @param ofs offset from device start
1889 * This is the default implementation, which can be overridden by
1890 * a hardware specific driver.
1892 static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
1894 struct onenand_chip *this = mtd->priv;
1895 struct bbm_info *bbm = this->bbm;
1896 u_char buf[2] = {0, 0};
1897 struct mtd_oob_ops ops = {
1898 .mode = MTD_OPS_PLACE_OOB,
1905 /* Get block number */
1906 block = onenand_block(this, ofs);
1908 bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
1910 /* We write two bytes, so we dont have to mess with 16 bit access */
1911 ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
1912 return onenand_write_oob_nolock(mtd, ofs, &ops);
1916 * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
1917 * @param mtd MTD device structure
1918 * @param ofs offset relative to mtd start
1920 * Mark the block as bad
1922 int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
1924 struct onenand_chip *this = mtd->priv;
1927 ret = onenand_block_isbad(mtd, ofs);
1929 /* If it was bad already, return success and do nothing */
1935 onenand_get_device(mtd, FL_WRITING);
1936 ret = this->block_markbad(mtd, ofs);
1937 onenand_release_device(mtd);
1943 * onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s)
1944 * @param mtd MTD device structure
1945 * @param ofs offset relative to mtd start
1946 * @param len number of bytes to lock or unlock
1947 * @param cmd lock or unlock command
1949 * Lock or unlock one or more blocks
1951 static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int cmd)
1953 struct onenand_chip *this = mtd->priv;
1954 int start, end, block, value, status;
1956 start = onenand_block(this, ofs);
1957 end = onenand_block(this, ofs + len);
1959 /* Continuous lock scheme */
1960 if (this->options & ONENAND_HAS_CONT_LOCK) {
1961 /* Set start block address */
1962 this->write_word(start,
1963 this->base + ONENAND_REG_START_BLOCK_ADDRESS);
1964 /* Set end block address */
1965 this->write_word(end - 1,
1966 this->base + ONENAND_REG_END_BLOCK_ADDRESS);
1967 /* Write unlock command */
1968 this->command(mtd, cmd, 0, 0);
1970 /* There's no return value */
1971 this->wait(mtd, FL_UNLOCKING);
1974 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
1975 & ONENAND_CTRL_ONGO)
1978 /* Check lock status */
1979 status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
1980 if (!(status & ONENAND_WP_US))
1981 printk(KERN_ERR "wp status = 0x%x\n", status);
1986 /* Block lock scheme */
1987 for (block = start; block < end; block++) {
1988 /* Set block address */
1989 value = onenand_block_address(this, block);
1990 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
1991 /* Select DataRAM for DDP */
1992 value = onenand_bufferram_address(this, block);
1993 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
1995 /* Set start block address */
1996 this->write_word(block,
1997 this->base + ONENAND_REG_START_BLOCK_ADDRESS);
1998 /* Write unlock command */
1999 this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0);
2001 /* There's no return value */
2002 this->wait(mtd, FL_UNLOCKING);
2005 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
2006 & ONENAND_CTRL_ONGO)
2009 /* Check lock status */
2010 status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
2011 if (!(status & ONENAND_WP_US))
2012 printk(KERN_ERR "block = %d, wp status = 0x%x\n",
2019 #ifdef ONENAND_LINUX
2021 * onenand_lock - [MTD Interface] Lock block(s)
2022 * @param mtd MTD device structure
2023 * @param ofs offset relative to mtd start
2024 * @param len number of bytes to unlock
2026 * Lock one or more blocks
2028 static int onenand_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
2032 onenand_get_device(mtd, FL_LOCKING);
2033 ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_LOCK);
2034 onenand_release_device(mtd);
2039 * onenand_unlock - [MTD Interface] Unlock block(s)
2040 * @param mtd MTD device structure
2041 * @param ofs offset relative to mtd start
2042 * @param len number of bytes to unlock
2044 * Unlock one or more blocks
2046 static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
2050 onenand_get_device(mtd, FL_LOCKING);
2051 ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
2052 onenand_release_device(mtd);
2058 * onenand_check_lock_status - [OneNAND Interface] Check lock status
2059 * @param this onenand chip data structure
2063 static int onenand_check_lock_status(struct onenand_chip *this)
2065 unsigned int value, block, status;
2068 end = this->chipsize >> this->erase_shift;
2069 for (block = 0; block < end; block++) {
2070 /* Set block address */
2071 value = onenand_block_address(this, block);
2072 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
2073 /* Select DataRAM for DDP */
2074 value = onenand_bufferram_address(this, block);
2075 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
2076 /* Set start block address */
2077 this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
2079 /* Check lock status */
2080 status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
2081 if (!(status & ONENAND_WP_US)) {
2082 printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status);
2091 * onenand_unlock_all - [OneNAND Interface] unlock all blocks
2092 * @param mtd MTD device structure
2096 static void onenand_unlock_all(struct mtd_info *mtd)
2098 struct onenand_chip *this = mtd->priv;
2100 size_t len = mtd->size;
2102 if (this->options & ONENAND_HAS_UNLOCK_ALL) {
2103 /* Set start block address */
2104 this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
2105 /* Write unlock command */
2106 this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
2108 /* There's no return value */
2109 this->wait(mtd, FL_LOCKING);
2112 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
2113 & ONENAND_CTRL_ONGO)
2116 /* Check lock status */
2117 if (onenand_check_lock_status(this))
2120 /* Workaround for all block unlock in DDP */
2121 if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) {
2122 /* All blocks on another chip */
2123 ofs = this->chipsize >> 1;
2124 len = this->chipsize >> 1;
2128 onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
2133 * onenand_check_features - Check and set OneNAND features
2134 * @param mtd MTD data structure
2136 * Check and set OneNAND features
2140 static void onenand_check_features(struct mtd_info *mtd)
2142 struct onenand_chip *this = mtd->priv;
2143 unsigned int density, process;
2145 /* Lock scheme depends on density and process */
2146 density = onenand_get_density(this->device_id);
2147 process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
2151 case ONENAND_DEVICE_DENSITY_4Gb:
2152 if (ONENAND_IS_DDP(this))
2153 this->options |= ONENAND_HAS_2PLANE;
2155 this->options |= ONENAND_HAS_4KB_PAGE;
2157 case ONENAND_DEVICE_DENSITY_2Gb:
2158 /* 2Gb DDP don't have 2 plane */
2159 if (!ONENAND_IS_DDP(this))
2160 this->options |= ONENAND_HAS_2PLANE;
2161 this->options |= ONENAND_HAS_UNLOCK_ALL;
2163 case ONENAND_DEVICE_DENSITY_1Gb:
2164 /* A-Die has all block unlock */
2166 this->options |= ONENAND_HAS_UNLOCK_ALL;
2170 /* Some OneNAND has continuous lock scheme */
2172 this->options |= ONENAND_HAS_CONT_LOCK;
2176 if (ONENAND_IS_MLC(this))
2177 this->options |= ONENAND_HAS_4KB_PAGE;
2179 if (ONENAND_IS_4KB_PAGE(this))
2180 this->options &= ~ONENAND_HAS_2PLANE;
2182 if (FLEXONENAND(this)) {
2183 this->options &= ~ONENAND_HAS_CONT_LOCK;
2184 this->options |= ONENAND_HAS_UNLOCK_ALL;
2187 if (this->options & ONENAND_HAS_CONT_LOCK)
2188 printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
2189 if (this->options & ONENAND_HAS_UNLOCK_ALL)
2190 printk(KERN_DEBUG "Chip support all block unlock\n");
2191 if (this->options & ONENAND_HAS_2PLANE)
2192 printk(KERN_DEBUG "Chip has 2 plane\n");
2193 if (this->options & ONENAND_HAS_4KB_PAGE)
2194 printk(KERN_DEBUG "Chip has 4KiB pagesize\n");
2199 * onenand_print_device_info - Print device ID
2200 * @param device device ID
2204 char *onenand_print_device_info(int device, int version)
2206 int vcc, demuxed, ddp, density, flexonenand;
2207 char *dev_info = malloc(80);
2210 vcc = device & ONENAND_DEVICE_VCC_MASK;
2211 demuxed = device & ONENAND_DEVICE_IS_DEMUX;
2212 ddp = device & ONENAND_DEVICE_IS_DDP;
2213 density = onenand_get_density(device);
2214 flexonenand = device & DEVICE_IS_FLEXONENAND;
2215 p += sprintf(dev_info, "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)",
2216 demuxed ? "" : "Muxed ",
2217 flexonenand ? "Flex-" : "",
2219 (16 << density), vcc ? "2.65/3.3" : "1.8", device);
2221 sprintf(p, "\nOneNAND version = 0x%04x", version);
2222 printk("%s\n", dev_info);
2227 static const struct onenand_manufacturers onenand_manuf_ids[] = {
2228 {ONENAND_MFR_NUMONYX, "Numonyx"},
2229 {ONENAND_MFR_SAMSUNG, "Samsung"},
2233 * onenand_check_maf - Check manufacturer ID
2234 * @param manuf manufacturer ID
2236 * Check manufacturer ID
2238 static int onenand_check_maf(int manuf)
2240 int size = ARRAY_SIZE(onenand_manuf_ids);
2242 #ifdef ONENAND_DEBUG
2246 for (i = 0; i < size; i++)
2247 if (manuf == onenand_manuf_ids[i].id)
2250 #ifdef ONENAND_DEBUG
2252 name = onenand_manuf_ids[i].name;
2256 printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf);
2263 * flexonenand_get_boundary - Reads the SLC boundary
2264 * @param onenand_info - onenand info structure
2266 * Fill up boundary[] field in onenand_chip
2268 static int flexonenand_get_boundary(struct mtd_info *mtd)
2270 struct onenand_chip *this = mtd->priv;
2271 unsigned int die, bdry;
2275 syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
2276 this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1);
2278 for (die = 0; die < this->dies; die++) {
2279 this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
2280 this->wait(mtd, FL_SYNCING);
2282 this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
2283 this->wait(mtd, FL_READING);
2285 bdry = this->read_word(this->base + ONENAND_DATARAM);
2286 if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
2290 this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
2292 this->command(mtd, ONENAND_CMD_RESET, 0, 0);
2293 this->wait(mtd, FL_RESETING);
2295 printk(KERN_INFO "Die %d boundary: %d%s\n", die,
2296 this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
2300 this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
2305 * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info
2306 * boundary[], diesize[], mtd->size, mtd->erasesize,
2308 * @param mtd - MTD device structure
2310 static void flexonenand_get_size(struct mtd_info *mtd)
2312 struct onenand_chip *this = mtd->priv;
2313 int die, i, eraseshift, density;
2314 int blksperdie, maxbdry;
2317 density = onenand_get_density(this->device_id);
2318 blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift);
2319 blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
2320 maxbdry = blksperdie - 1;
2321 eraseshift = this->erase_shift - 1;
2323 mtd->numeraseregions = this->dies << 1;
2325 /* This fills up the device boundary */
2326 flexonenand_get_boundary(mtd);
2330 for (; die < this->dies; die++) {
2331 if (!die || this->boundary[die-1] != maxbdry) {
2333 mtd->eraseregions[i].offset = ofs;
2334 mtd->eraseregions[i].erasesize = 1 << eraseshift;
2335 mtd->eraseregions[i].numblocks =
2336 this->boundary[die] + 1;
2337 ofs += mtd->eraseregions[i].numblocks << eraseshift;
2340 mtd->numeraseregions -= 1;
2341 mtd->eraseregions[i].numblocks +=
2342 this->boundary[die] + 1;
2343 ofs += (this->boundary[die] + 1) << (eraseshift - 1);
2345 if (this->boundary[die] != maxbdry) {
2347 mtd->eraseregions[i].offset = ofs;
2348 mtd->eraseregions[i].erasesize = 1 << eraseshift;
2349 mtd->eraseregions[i].numblocks = maxbdry ^
2350 this->boundary[die];
2351 ofs += mtd->eraseregions[i].numblocks << eraseshift;
2354 mtd->numeraseregions -= 1;
2357 /* Expose MLC erase size except when all blocks are SLC */
2358 mtd->erasesize = 1 << this->erase_shift;
2359 if (mtd->numeraseregions == 1)
2360 mtd->erasesize >>= 1;
2362 printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions);
2363 for (i = 0; i < mtd->numeraseregions; i++)
2364 printk(KERN_INFO "[offset: 0x%08llx, erasesize: 0x%05x,"
2365 " numblocks: %04u]\n", mtd->eraseregions[i].offset,
2366 mtd->eraseregions[i].erasesize,
2367 mtd->eraseregions[i].numblocks);
2369 for (die = 0, mtd->size = 0; die < this->dies; die++) {
2370 this->diesize[die] = (loff_t) (blksperdie << this->erase_shift);
2371 this->diesize[die] -= (loff_t) (this->boundary[die] + 1)
2372 << (this->erase_shift - 1);
2373 mtd->size += this->diesize[die];
2378 * flexonenand_check_blocks_erased - Check if blocks are erased
2379 * @param mtd_info - mtd info structure
2380 * @param start - first erase block to check
2381 * @param end - last erase block to check
2383 * Converting an unerased block from MLC to SLC
2384 * causes byte values to change. Since both data and its ECC
2385 * have changed, reads on the block give uncorrectable error.
2386 * This might lead to the block being detected as bad.
2388 * Avoid this by ensuring that the block to be converted is
2391 static int flexonenand_check_blocks_erased(struct mtd_info *mtd,
2394 struct onenand_chip *this = mtd->priv;
2397 struct mtd_oob_ops ops = {
2398 .mode = MTD_OPS_PLACE_OOB,
2400 .ooblen = mtd->oobsize,
2402 .oobbuf = this->oob_buf,
2406 printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end);
2408 for (block = start; block <= end; block++) {
2409 addr = flexonenand_addr(this, block);
2410 if (onenand_block_isbad_nolock(mtd, addr, 0))
2414 * Since main area write results in ECC write to spare,
2415 * it is sufficient to check only ECC bytes for change.
2417 ret = onenand_read_oob_nolock(mtd, addr, &ops);
2421 for (i = 0; i < mtd->oobsize; i++)
2422 if (this->oob_buf[i] != 0xff)
2425 if (i != mtd->oobsize) {
2426 printk(KERN_WARNING "Block %d not erased.\n", block);
2435 * flexonenand_set_boundary - Writes the SLC boundary
2436 * @param mtd - mtd info structure
2438 int flexonenand_set_boundary(struct mtd_info *mtd, int die,
2439 int boundary, int lock)
2441 struct onenand_chip *this = mtd->priv;
2442 int ret, density, blksperdie, old, new, thisboundary;
2445 if (die >= this->dies)
2448 if (boundary == this->boundary[die])
2451 density = onenand_get_density(this->device_id);
2452 blksperdie = ((16 << density) << 20) >> this->erase_shift;
2453 blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
2455 if (boundary >= blksperdie) {
2456 printk("flexonenand_set_boundary:"
2457 "Invalid boundary value. "
2458 "Boundary not changed.\n");
2462 /* Check if converting blocks are erased */
2463 old = this->boundary[die] + (die * this->density_mask);
2464 new = boundary + (die * this->density_mask);
2465 ret = flexonenand_check_blocks_erased(mtd, min(old, new)
2466 + 1, max(old, new));
2468 printk(KERN_ERR "flexonenand_set_boundary: Please erase blocks before boundary change\n");
2472 this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
2473 this->wait(mtd, FL_SYNCING);
2475 /* Check is boundary is locked */
2476 this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
2477 ret = this->wait(mtd, FL_READING);
2479 thisboundary = this->read_word(this->base + ONENAND_DATARAM);
2480 if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
2481 printk(KERN_ERR "flexonenand_set_boundary: boundary locked\n");
2485 printk(KERN_INFO "flexonenand_set_boundary: Changing die %d boundary: %d%s\n",
2486 die, boundary, lock ? "(Locked)" : "(Unlocked)");
2488 boundary &= FLEXONENAND_PI_MASK;
2489 boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT);
2491 addr = die ? this->diesize[0] : 0;
2492 this->command(mtd, ONENAND_CMD_ERASE, addr, 0);
2493 ret = this->wait(mtd, FL_ERASING);
2495 printk("flexonenand_set_boundary:"
2496 "Failed PI erase for Die %d\n", die);
2500 this->write_word(boundary, this->base + ONENAND_DATARAM);
2501 this->command(mtd, ONENAND_CMD_PROG, addr, 0);
2502 ret = this->wait(mtd, FL_WRITING);
2504 printk("flexonenand_set_boundary:"
2505 "Failed PI write for Die %d\n", die);
2509 this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0);
2510 ret = this->wait(mtd, FL_WRITING);
2512 this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND);
2513 this->wait(mtd, FL_RESETING);
2515 /* Recalculate device size on boundary change*/
2516 flexonenand_get_size(mtd);
2522 * onenand_chip_probe - [OneNAND Interface] Probe the OneNAND chip
2523 * @param mtd MTD device structure
2525 * OneNAND detection method:
2526 * Compare the the values from command with ones from register
2528 static int onenand_chip_probe(struct mtd_info *mtd)
2530 struct onenand_chip *this = mtd->priv;
2531 int bram_maf_id, bram_dev_id, maf_id, dev_id;
2534 /* Save system configuration 1 */
2535 syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
2537 /* Clear Sync. Burst Read mode to read BootRAM */
2538 this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ),
2539 this->base + ONENAND_REG_SYS_CFG1);
2541 /* Send the command for reading device ID from BootRAM */
2542 this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM);
2544 /* Read manufacturer and device IDs from BootRAM */
2545 bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0);
2546 bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2);
2548 /* Reset OneNAND to read default register values */
2549 this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM);
2552 if (this->wait(mtd, FL_RESETING))
2555 /* Restore system configuration 1 */
2556 this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
2558 /* Check manufacturer ID */
2559 if (onenand_check_maf(bram_maf_id))
2562 /* Read manufacturer and device IDs from Register */
2563 maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
2564 dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
2566 /* Check OneNAND device */
2567 if (maf_id != bram_maf_id || dev_id != bram_dev_id)
2574 * onenand_probe - [OneNAND Interface] Probe the OneNAND device
2575 * @param mtd MTD device structure
2577 * OneNAND detection method:
2578 * Compare the the values from command with ones from register
2580 int onenand_probe(struct mtd_info *mtd)
2582 struct onenand_chip *this = mtd->priv;
2587 ret = this->chip_probe(mtd);
2591 /* Read device IDs from Register */
2592 dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
2593 ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
2594 this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
2596 /* Flash device information */
2597 mtd->name = onenand_print_device_info(dev_id, ver_id);
2598 this->device_id = dev_id;
2599 this->version_id = ver_id;
2601 /* Check OneNAND features */
2602 onenand_check_features(mtd);
2604 density = onenand_get_density(dev_id);
2605 if (FLEXONENAND(this)) {
2606 this->dies = ONENAND_IS_DDP(this) ? 2 : 1;
2607 /* Maximum possible erase regions */
2608 mtd->numeraseregions = this->dies << 1;
2609 mtd->eraseregions = malloc(sizeof(struct mtd_erase_region_info)
2610 * (this->dies << 1));
2611 if (!mtd->eraseregions)
2616 * For Flex-OneNAND, chipsize represents maximum possible device size.
2617 * mtd->size represents the actual device size.
2619 this->chipsize = (16 << density) << 20;
2621 /* OneNAND page size & block size */
2622 /* The data buffer size is equal to page size */
2624 this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
2625 /* We use the full BufferRAM */
2626 if (ONENAND_IS_4KB_PAGE(this))
2627 mtd->writesize <<= 1;
2629 mtd->oobsize = mtd->writesize >> 5;
2630 /* Pagers per block is always 64 in OneNAND */
2631 mtd->erasesize = mtd->writesize << 6;
2633 * Flex-OneNAND SLC area has 64 pages per block.
2634 * Flex-OneNAND MLC area has 128 pages per block.
2635 * Expose MLC erase size to find erase_shift and page_mask.
2637 if (FLEXONENAND(this))
2638 mtd->erasesize <<= 1;
2640 this->erase_shift = ffs(mtd->erasesize) - 1;
2641 this->page_shift = ffs(mtd->writesize) - 1;
2642 this->ppb_shift = (this->erase_shift - this->page_shift);
2643 this->page_mask = (mtd->erasesize / mtd->writesize) - 1;
2644 /* Set density mask. it is used for DDP */
2645 if (ONENAND_IS_DDP(this))
2646 this->density_mask = this->chipsize >> (this->erase_shift + 1);
2647 /* It's real page size */
2648 this->writesize = mtd->writesize;
2650 /* REVIST: Multichip handling */
2652 if (FLEXONENAND(this))
2653 flexonenand_get_size(mtd);
2655 mtd->size = this->chipsize;
2657 mtd->flags = MTD_CAP_NANDFLASH;
2658 mtd->_erase = onenand_erase;
2659 mtd->_read_oob = onenand_read_oob;
2660 mtd->_write_oob = onenand_write_oob;
2661 mtd->_sync = onenand_sync;
2662 mtd->_block_isbad = onenand_block_isbad;
2663 mtd->_block_markbad = onenand_block_markbad;
2664 mtd->writebufsize = mtd->writesize;
2670 * onenand_scan - [OneNAND Interface] Scan for the OneNAND device
2671 * @param mtd MTD device structure
2672 * @param maxchips Number of chips to scan for
2674 * This fills out all the not initialized function pointers
2675 * with the defaults.
2676 * The flash ID is read and the mtd/chip structures are
2677 * filled with the appropriate values.
2679 int onenand_scan(struct mtd_info *mtd, int maxchips)
2682 struct onenand_chip *this = mtd->priv;
2684 if (!this->read_word)
2685 this->read_word = onenand_readw;
2686 if (!this->write_word)
2687 this->write_word = onenand_writew;
2690 this->command = onenand_command;
2692 this->wait = onenand_wait;
2693 if (!this->bbt_wait)
2694 this->bbt_wait = onenand_bbt_wait;
2696 if (!this->read_bufferram)
2697 this->read_bufferram = onenand_read_bufferram;
2698 if (!this->write_bufferram)
2699 this->write_bufferram = onenand_write_bufferram;
2701 if (!this->chip_probe)
2702 this->chip_probe = onenand_chip_probe;
2704 if (!this->block_markbad)
2705 this->block_markbad = onenand_default_block_markbad;
2706 if (!this->scan_bbt)
2707 this->scan_bbt = onenand_default_bbt;
2709 if (onenand_probe(mtd))
2712 /* Set Sync. Burst Read after probing */
2713 if (this->mmcontrol) {
2714 printk(KERN_INFO "OneNAND Sync. Burst Read support\n");
2715 this->read_bufferram = onenand_sync_read_bufferram;
2718 /* Allocate buffers, if necessary */
2719 if (!this->page_buf) {
2720 this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL);
2721 if (!this->page_buf) {
2722 printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n");
2725 this->options |= ONENAND_PAGEBUF_ALLOC;
2727 if (!this->oob_buf) {
2728 this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
2729 if (!this->oob_buf) {
2730 printk(KERN_ERR "onenand_scan: Can't allocate oob_buf\n");
2731 if (this->options & ONENAND_PAGEBUF_ALLOC) {
2732 this->options &= ~ONENAND_PAGEBUF_ALLOC;
2733 kfree(this->page_buf);
2737 this->options |= ONENAND_OOBBUF_ALLOC;
2740 this->state = FL_READY;
2743 * Allow subpage writes up to oobsize.
2745 switch (mtd->oobsize) {
2747 this->ecclayout = &onenand_oob_128;
2748 mtd->subpage_sft = 0;
2752 this->ecclayout = &onenand_oob_64;
2753 mtd->subpage_sft = 2;
2757 this->ecclayout = &onenand_oob_32;
2758 mtd->subpage_sft = 1;
2762 printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n",
2764 mtd->subpage_sft = 0;
2765 /* To prevent kernel oops */
2766 this->ecclayout = &onenand_oob_32;
2770 this->subpagesize = mtd->writesize >> mtd->subpage_sft;
2773 * The number of bytes available for a client to place data into
2774 * the out of band area
2776 this->ecclayout->oobavail = 0;
2778 for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE &&
2779 this->ecclayout->oobfree[i].length; i++)
2780 this->ecclayout->oobavail +=
2781 this->ecclayout->oobfree[i].length;
2782 mtd->oobavail = this->ecclayout->oobavail;
2784 mtd->ecclayout = this->ecclayout;
2786 /* Unlock whole block */
2787 onenand_unlock_all(mtd);
2789 return this->scan_bbt(mtd);
2793 * onenand_release - [OneNAND Interface] Free resources held by the OneNAND device
2794 * @param mtd MTD device structure
2796 void onenand_release(struct mtd_info *mtd)