2 * Platform independend driver for JZ4740.
4 * Copyright (c) 2007 Ingenic Semiconductor Inc.
5 * Author: <jlwei@ingenic.cn>
7 * SPDX-License-Identifier: GPL-2.0+
13 #include <asm/jz4740.h>
15 #define JZ_NAND_DATA_ADDR ((void __iomem *)0xB8000000)
16 #define JZ_NAND_CMD_ADDR (JZ_NAND_DATA_ADDR + 0x8000)
17 #define JZ_NAND_ADDR_ADDR (JZ_NAND_DATA_ADDR + 0x10000)
19 #define BIT(x) (1 << (x))
20 #define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
21 #define JZ_NAND_ECC_CTRL_RS BIT(2)
22 #define JZ_NAND_ECC_CTRL_RESET BIT(1)
23 #define JZ_NAND_ECC_CTRL_ENABLE BIT(0)
25 #define EMC_SMCR1_OPT_NAND 0x094c4400
26 /* Optimize the timing of nand */
28 static struct jz4740_emc * emc = (struct jz4740_emc *)JZ4740_EMC_BASE;
30 static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
33 12, 13, 14, 15, 16, 17, 18, 19,
34 20, 21, 22, 23, 24, 25, 26, 27,
35 28, 29, 30, 31, 32, 33, 34, 35,
36 36, 37, 38, 39, 40, 41, 42, 43,
37 44, 45, 46, 47, 48, 49, 50, 51,
38 52, 53, 54, 55, 56, 57, 58, 59,
39 60, 61, 62, 63, 64, 65, 66, 67,
40 68, 69, 70, 71, 72, 73, 74, 75,
41 76, 77, 78, 79, 80, 81, 82, 83 },
49 static int is_reading;
51 static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
53 struct nand_chip *this = mtd->priv;
56 if (ctrl & NAND_CTRL_CHANGE) {
58 this->IO_ADDR_W = JZ_NAND_ADDR_ADDR;
59 else if (ctrl & NAND_CLE)
60 this->IO_ADDR_W = JZ_NAND_CMD_ADDR;
62 this->IO_ADDR_W = JZ_NAND_DATA_ADDR;
64 reg = readl(&emc->nfcsr);
66 reg |= EMC_NFCSR_NFCE1;
68 reg &= ~EMC_NFCSR_NFCE1;
69 writel(reg, &emc->nfcsr);
72 if (cmd != NAND_CMD_NONE)
73 writeb(cmd, this->IO_ADDR_W);
76 static int jz_nand_device_ready(struct mtd_info *mtd)
78 return (readl(GPIO_PXPIN(2)) & 0x40000000) ? 1 : 0;
81 void board_nand_select_device(struct nand_chip *nand, int chip)
84 * Don't use "chip" to address the NAND device,
85 * generate the cs from the address where it is encoded.
89 static int jz_nand_rs_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
99 status = readl(&emc->nfints);
100 } while (!(status & EMC_NFINTS_ENCF));
103 writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr);
105 for (i = 0; i < 9; i++)
106 ecc_code[i] = readb(&emc->nfpar[i]);
111 static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
115 writel(0, &emc->nfints);
116 reg = readl(&emc->nfecr);
117 reg |= JZ_NAND_ECC_CTRL_RESET;
118 reg |= JZ_NAND_ECC_CTRL_ENABLE;
119 reg |= JZ_NAND_ECC_CTRL_RS;
123 reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
127 reg |= JZ_NAND_ECC_CTRL_ENCODING;
134 writel(reg, &emc->nfecr);
137 /* Correct 1~9-bit errors in 512-bytes data */
138 static void jz_rs_correct(unsigned char *dat, int idx, int mask)
144 i = idx + (idx >> 3);
148 mask <<= (idx & 0x7);
150 dat[i] ^= mask & 0xff;
152 dat[i + 1] ^= (mask >> 8) & 0xff;
155 static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat,
156 u_char *read_ecc, u_char *calc_ecc)
159 uint32_t errcnt, index, mask, status;
162 const uint8_t all_ff_ecc[] = {
163 0xcd, 0x9d, 0x90, 0x58, 0xf4, 0x8b, 0xff, 0xb7, 0x6f };
165 if (read_ecc[0] == 0xff && read_ecc[1] == 0xff &&
166 read_ecc[2] == 0xff && read_ecc[3] == 0xff &&
167 read_ecc[4] == 0xff && read_ecc[5] == 0xff &&
168 read_ecc[6] == 0xff && read_ecc[7] == 0xff &&
169 read_ecc[8] == 0xff) {
170 for (k = 0; k < 9; k++)
171 writeb(all_ff_ecc[k], &emc->nfpar[k]);
173 for (k = 0; k < 9; k++)
174 writeb(read_ecc[k], &emc->nfpar[k]);
177 writel(readl(&emc->nfecr) | EMC_NFECR_PRDY, &emc->nfecr);
179 /* Wait for completion */
181 status = readl(&emc->nfints);
182 } while (!(status & EMC_NFINTS_DECF));
185 writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr);
188 if (!(status & EMC_NFINTS_ERR))
191 if (status & EMC_NFINTS_UNCOR) {
192 printf("uncorrectable ecc\n");
196 errcnt = (status & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT;
200 index = (readl(&emc->nferr[3]) & EMC_NFERR_INDEX_MASK) >>
202 mask = (readl(&emc->nferr[3]) & EMC_NFERR_MASK_MASK) >>
204 jz_rs_correct(dat, index, mask);
206 index = (readl(&emc->nferr[2]) & EMC_NFERR_INDEX_MASK) >>
208 mask = (readl(&emc->nferr[2]) & EMC_NFERR_MASK_MASK) >>
210 jz_rs_correct(dat, index, mask);
212 index = (readl(&emc->nferr[1]) & EMC_NFERR_INDEX_MASK) >>
214 mask = (readl(&emc->nferr[1]) & EMC_NFERR_MASK_MASK) >>
216 jz_rs_correct(dat, index, mask);
218 index = (readl(&emc->nferr[0]) & EMC_NFERR_INDEX_MASK) >>
220 mask = (readl(&emc->nferr[0]) & EMC_NFERR_MASK_MASK) >>
222 jz_rs_correct(dat, index, mask);
231 * Main initialization routine
233 int board_nand_init(struct nand_chip *nand)
237 reg = readl(&emc->nfcsr);
238 reg |= EMC_NFCSR_NFE1; /* EMC setup, Set NFE bit */
239 writel(reg, &emc->nfcsr);
241 writel(EMC_SMCR1_OPT_NAND, &emc->smcr[1]);
243 nand->IO_ADDR_R = JZ_NAND_DATA_ADDR;
244 nand->IO_ADDR_W = JZ_NAND_DATA_ADDR;
245 nand->cmd_ctrl = jz_nand_cmd_ctrl;
246 nand->dev_ready = jz_nand_device_ready;
247 nand->ecc.hwctl = jz_nand_hwctl;
248 nand->ecc.correct = jz_nand_rs_correct_data;
249 nand->ecc.calculate = jz_nand_rs_calculate_ecc;
250 nand->ecc.mode = NAND_ECC_HW_OOB_FIRST;
251 nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
252 nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
253 nand->ecc.strength = 4;
254 nand->ecc.layout = &qi_lb60_ecclayout_2gb;
255 nand->chip_delay = 50;
256 nand->bbt_options |= NAND_BBT_USE_FLASH;