drivers/mmc/mmc.c

   1 /*
   2  * Copyright 2008, Freescale Semiconductor, Inc
   3  * Andy Fleming
   4  *
   5  * Based vaguely on the Linux code
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #include <config.h>
  11 #include <common.h>
  12 #include <command.h>
  13 #include <dm.h>
  14 #include <dm/device-internal.h>
  15 #include <errno.h>
  16 #include <mmc.h>
  17 #include <part.h>
  18 #include <power/regulator.h>
  19 #include <malloc.h>
  20 #include <memalign.h>
  21 #include <linux/list.h>
  22 #include <div64.h>
  23 #include "mmc_private.h"
  24
  25 static const unsigned int sd_au_size[] = {
  26         0,              SZ_16K / 512,           SZ_32K / 512,
  27         SZ_64K / 512,   SZ_128K / 512,          SZ_256K / 512,
  28         SZ_512K / 512,  SZ_1M / 512,            SZ_2M / 512,
  29         SZ_4M / 512,    SZ_8M / 512,            (SZ_8M + SZ_4M) / 512,
  30         SZ_16M / 512,   (SZ_16M + SZ_8M) / 512, SZ_32M / 512,   SZ_64M / 512,
  31 };
  32
  33 #if CONFIG_IS_ENABLED(MMC_TINY)
  34 static struct mmc mmc_static;
  35 struct mmc *find_mmc_device(int dev_num)
  36 {
  37         return &mmc_static;
  38 }
  39
  40 void mmc_do_preinit(void)
  41 {
  42         struct mmc *m = &mmc_static;
  43 #ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
  44         mmc_set_preinit(m, 1);
  45 #endif
  46         if (m->preinit)
  47                 mmc_start_init(m);
  48 }
  49
  50 struct blk_desc *mmc_get_blk_desc(struct mmc *mmc)
  51 {
  52         return &mmc->block_dev;
  53 }
  54 #endif
  55
  56 #if !CONFIG_IS_ENABLED(DM_MMC)
  57 __weak int board_mmc_getwp(struct mmc *mmc)
  58 {
  59         return -1;
  60 }
  61
  62 int mmc_getwp(struct mmc *mmc)
  63 {
  64         int wp;
  65
  66         wp = board_mmc_getwp(mmc);
  67
  68         if (wp < 0) {
  69                 if (mmc->cfg->ops->getwp)
  70                         wp = mmc->cfg->ops->getwp(mmc);
  71                 else
  72                         wp = 0;
  73         }
  74
  75         return wp;
  76 }
  77
  78 __weak int board_mmc_getcd(struct mmc *mmc)
  79 {
  80         return -1;
  81 }
  82 #endif
  83
  84 #ifdef CONFIG_MMC_TRACE
  85 void mmmc_trace_before_send(struct mmc *mmc, struct mmc_cmd *cmd)
  86 {
  87         printf("CMD_SEND:%d\n", cmd->cmdidx);
  88         printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg);
  89 }
  90
  91 void mmmc_trace_after_send(struct mmc *mmc, struct mmc_cmd *cmd, int ret)
  92 {
  93         int i;
  94         u8 *ptr;
  95
  96         if (ret) {
  97                 printf("\t\tRET\t\t\t %d\n", ret);
  98         } else {
  99                 switch (cmd->resp_type) {
 100                 case MMC_RSP_NONE:
 101                         printf("\t\tMMC_RSP_NONE\n");
 102                         break;
 103                 case MMC_RSP_R1:
 104                         printf("\t\tMMC_RSP_R1,5,6,7 \t 0x%08X \n",
 105                                 cmd->response[0]);
 106                         break;
 107                 case MMC_RSP_R1b:
 108                         printf("\t\tMMC_RSP_R1b\t\t 0x%08X \n",
 109                                 cmd->response[0]);
 110                         break;
 111                 case MMC_RSP_R2:
 112                         printf("\t\tMMC_RSP_R2\t\t 0x%08X \n",
 113                                 cmd->response[0]);
 114                         printf("\t\t          \t\t 0x%08X \n",
 115                                 cmd->response[1]);
 116                         printf("\t\t          \t\t 0x%08X \n",
 117                                 cmd->response[2]);
 118                         printf("\t\t          \t\t 0x%08X \n",
 119                                 cmd->response[3]);
 120                         printf("\n");
 121                         printf("\t\t\t\t\tDUMPING DATA\n");
 122                         for (i = 0; i < 4; i++) {
 123                                 int j;
 124                                 printf("\t\t\t\t\t%03d - ", i*4);
 125                                 ptr = (u8 *)&cmd->response[i];
 126                                 ptr += 3;
 127                                 for (j = 0; j < 4; j++)
 128                                         printf("%02X ", *ptr--);
 129                                 printf("\n");
 130                         }
 131                         break;
 132                 case MMC_RSP_R3:
 133                         printf("\t\tMMC_RSP_R3,4\t\t 0x%08X \n",
 134                                 cmd->response[0]);
 135                         break;
 136                 default:
 137                         printf("\t\tERROR MMC rsp not supported\n");
 138                         break;
 139                 }
 140         }
 141 }
 142
 143 void mmc_trace_state(struct mmc *mmc, struct mmc_cmd *cmd)
 144 {
 145         int status;
 146
 147         status = (cmd->response[0] & MMC_STATUS_CURR_STATE) >> 9;
 148         printf("CURR STATE:%d\n", status);
 149 }
 150 #endif
 151
 152 #if !CONFIG_IS_ENABLED(DM_MMC)
 153 int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 154 {
 155         int ret;
 156
 157         mmmc_trace_before_send(mmc, cmd);
 158         ret = mmc->cfg->ops->send_cmd(mmc, cmd, data);
 159         mmmc_trace_after_send(mmc, cmd, ret);
 160
 161         return ret;
 162 }
 163 #endif
 164
 165 int mmc_send_status(struct mmc *mmc, int timeout)
 166 {
 167         struct mmc_cmd cmd;
 168         int err, retries = 5;
 169
 170         cmd.cmdidx = MMC_CMD_SEND_STATUS;
 171         cmd.resp_type = MMC_RSP_R1;
 172         if (!mmc_host_is_spi(mmc))
 173                 cmd.cmdarg = mmc->rca << 16;
 174
 175         while (1) {
 176                 err = mmc_send_cmd(mmc, &cmd, NULL);
 177                 if (!err) {
 178                         if ((cmd.response[0] & MMC_STATUS_RDY_FOR_DATA) &&
 179                             (cmd.response[0] & MMC_STATUS_CURR_STATE) !=
 180                              MMC_STATE_PRG)
 181                                 break;
 182                         else if (cmd.response[0] & MMC_STATUS_MASK) {
 183 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 184                                 printf("Status Error: 0x%08X\n",
 185                                         cmd.response[0]);
 186 #endif
 187                                 return -ECOMM;
 188                         }
 189                 } else if (--retries < 0)
 190                         return err;
 191
 192                 if (timeout-- <= 0)
 193                         break;
 194
 195                 udelay(1000);
 196         }
 197
 198         mmc_trace_state(mmc, &cmd);
 199         if (timeout <= 0) {
 200 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 201                 printf("Timeout waiting card ready\n");
 202 #endif
 203                 return -ETIMEDOUT;
 204         }
 205
 206         return 0;
 207 }
 208
 209 int mmc_set_blocklen(struct mmc *mmc, int len)
 210 {
 211         struct mmc_cmd cmd;
 212
 213         if (mmc->ddr_mode)
 214                 return 0;
 215
 216         cmd.cmdidx = MMC_CMD_SET_BLOCKLEN;
 217         cmd.resp_type = MMC_RSP_R1;
 218         cmd.cmdarg = len;
 219
 220         return mmc_send_cmd(mmc, &cmd, NULL);
 221 }
 222
 223 static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
 224                            lbaint_t blkcnt)
 225 {
 226         struct mmc_cmd cmd;
 227         struct mmc_data data;
 228
 229         if (blkcnt > 1)
 230                 cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK;
 231         else
 232                 cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK;
 233
 234         if (mmc->high_capacity)
 235                 cmd.cmdarg = start;
 236         else
 237                 cmd.cmdarg = start * mmc->read_bl_len;
 238
 239         cmd.resp_type = MMC_RSP_R1;
 240
 241         data.dest = dst;
 242         data.blocks = blkcnt;
 243         data.blocksize = mmc->read_bl_len;
 244         data.flags = MMC_DATA_READ;
 245
 246         if (mmc_send_cmd(mmc, &cmd, &data))
 247                 return 0;
 248
 249         if (blkcnt > 1) {
 250                 cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION;
 251                 cmd.cmdarg = 0;
 252                 cmd.resp_type = MMC_RSP_R1b;
 253                 if (mmc_send_cmd(mmc, &cmd, NULL)) {
 254 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 255                         printf("mmc fail to send stop cmd\n");
 256 #endif
 257                         return 0;
 258                 }
 259         }
 260
 261         return blkcnt;
 262 }
 263
 264 #if CONFIG_IS_ENABLED(BLK)
 265 ulong mmc_bread(struct udevice *dev, lbaint_t start, lbaint_t blkcnt, void *dst)
 266 #else
 267 ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
 268                 void *dst)
 269 #endif
 270 {
 271 #if CONFIG_IS_ENABLED(BLK)
 272         struct blk_desc *block_dev = dev_get_uclass_platdata(dev);
 273 #endif
 274         int dev_num = block_dev->devnum;
 275         int err;
 276         lbaint_t cur, blocks_todo = blkcnt;
 277
 278         if (blkcnt == 0)
 279                 return 0;
 280
 281         struct mmc *mmc = find_mmc_device(dev_num);
 282         if (!mmc)
 283                 return 0;
 284
 285         if (CONFIG_IS_ENABLED(MMC_TINY))
 286                 err = mmc_switch_part(mmc, block_dev->hwpart);
 287         else
 288                 err = blk_dselect_hwpart(block_dev, block_dev->hwpart);
 289
 290         if (err < 0)
 291                 return 0;
 292
 293         if ((start + blkcnt) > block_dev->lba) {
 294 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 295                 printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
 296                         start + blkcnt, block_dev->lba);
 297 #endif
 298                 return 0;
 299         }
 300
 301         if (mmc_set_blocklen(mmc, mmc->read_bl_len)) {
 302                 debug("%s: Failed to set blocklen\n", __func__);
 303                 return 0;
 304         }
 305
 306         do {
 307                 cur = (blocks_todo > mmc->cfg->b_max) ?
 308                         mmc->cfg->b_max : blocks_todo;
 309                 if (mmc_read_blocks(mmc, dst, start, cur) != cur) {
 310                         debug("%s: Failed to read blocks\n", __func__);
 311                         return 0;
 312                 }
 313                 blocks_todo -= cur;
 314                 start += cur;
 315                 dst += cur * mmc->read_bl_len;
 316         } while (blocks_todo > 0);
 317
 318         return blkcnt;
 319 }
 320
 321 static int mmc_go_idle(struct mmc *mmc)
 322 {
 323         struct mmc_cmd cmd;
 324         int err;
 325
 326         udelay(1000);
 327
 328         cmd.cmdidx = MMC_CMD_GO_IDLE_STATE;
 329         cmd.cmdarg = 0;
 330         cmd.resp_type = MMC_RSP_NONE;
 331
 332         err = mmc_send_cmd(mmc, &cmd, NULL);
 333
 334         if (err)
 335                 return err;
 336
 337         udelay(2000);
 338
 339         return 0;
 340 }
 341
 342 static int sd_send_op_cond(struct mmc *mmc)
 343 {
 344         int timeout = 1000;
 345         int err;
 346         struct mmc_cmd cmd;
 347
 348         while (1) {
 349                 cmd.cmdidx = MMC_CMD_APP_CMD;
 350                 cmd.resp_type = MMC_RSP_R1;
 351                 cmd.cmdarg = 0;
 352
 353                 err = mmc_send_cmd(mmc, &cmd, NULL);
 354
 355                 if (err)
 356                         return err;
 357
 358                 cmd.cmdidx = SD_CMD_APP_SEND_OP_COND;
 359                 cmd.resp_type = MMC_RSP_R3;
 360
 361                 /*
 362                  * Most cards do not answer if some reserved bits
 363                  * in the ocr are set. However, Some controller
 364                  * can set bit 7 (reserved for low voltages), but
 365                  * how to manage low voltages SD card is not yet
 366                  * specified.
 367                  */
 368                 cmd.cmdarg = mmc_host_is_spi(mmc) ? 0 :
 369                         (mmc->cfg->voltages & 0xff8000);
 370
 371                 if (mmc->version == SD_VERSION_2)
 372                         cmd.cmdarg |= OCR_HCS;
 373
 374                 err = mmc_send_cmd(mmc, &cmd, NULL);
 375
 376                 if (err)
 377                         return err;
 378
 379                 if (cmd.response[0] & OCR_BUSY)
 380                         break;
 381
 382                 if (timeout-- <= 0)
 383                         return -EOPNOTSUPP;
 384
 385                 udelay(1000);
 386         }
 387
 388         if (mmc->version != SD_VERSION_2)
 389                 mmc->version = SD_VERSION_1_0;
 390
 391         if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
 392                 cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
 393                 cmd.resp_type = MMC_RSP_R3;
 394                 cmd.cmdarg = 0;
 395
 396                 err = mmc_send_cmd(mmc, &cmd, NULL);
 397
 398                 if (err)
 399                         return err;
 400         }
 401
 402         mmc->ocr = cmd.response[0];
 403
 404         mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
 405         mmc->rca = 0;
 406
 407         return 0;
 408 }
 409
 410 static int mmc_send_op_cond_iter(struct mmc *mmc, int use_arg)
 411 {
 412         struct mmc_cmd cmd;
 413         int err;
 414
 415         cmd.cmdidx = MMC_CMD_SEND_OP_COND;
 416         cmd.resp_type = MMC_RSP_R3;
 417         cmd.cmdarg = 0;
 418         if (use_arg && !mmc_host_is_spi(mmc))
 419                 cmd.cmdarg = OCR_HCS |
 420                         (mmc->cfg->voltages &
 421                         (mmc->ocr & OCR_VOLTAGE_MASK)) |
 422                         (mmc->ocr & OCR_ACCESS_MODE);
 423
 424         err = mmc_send_cmd(mmc, &cmd, NULL);
 425         if (err)
 426                 return err;
 427         mmc->ocr = cmd.response[0];
 428         return 0;
 429 }
 430
 431 static int mmc_send_op_cond(struct mmc *mmc)
 432 {
 433         int err, i;
 434
 435         /* Some cards seem to need this */
 436         mmc_go_idle(mmc);
 437
 438         /* Asking to the card its capabilities */
 439         for (i = 0; i < 2; i++) {
 440                 err = mmc_send_op_cond_iter(mmc, i != 0);
 441                 if (err)
 442                         return err;
 443
 444                 /* exit if not busy (flag seems to be inverted) */
 445                 if (mmc->ocr & OCR_BUSY)
 446                         break;
 447         }
 448         mmc->op_cond_pending = 1;
 449         return 0;
 450 }
 451
 452 static int mmc_complete_op_cond(struct mmc *mmc)
 453 {
 454         struct mmc_cmd cmd;
 455         int timeout = 1000;
 456         uint start;
 457         int err;
 458
 459         mmc->op_cond_pending = 0;
 460         if (!(mmc->ocr & OCR_BUSY)) {
 461                 /* Some cards seem to need this */
 462                 mmc_go_idle(mmc);
 463
 464                 start = get_timer(0);
 465                 while (1) {
 466                         err = mmc_send_op_cond_iter(mmc, 1);
 467                         if (err)
 468                                 return err;
 469                         if (mmc->ocr & OCR_BUSY)
 470                                 break;
 471                         if (get_timer(start) > timeout)
 472                                 return -EOPNOTSUPP;
 473                         udelay(100);
 474                 }
 475         }
 476
 477         if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
 478                 cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
 479                 cmd.resp_type = MMC_RSP_R3;
 480                 cmd.cmdarg = 0;
 481
 482                 err = mmc_send_cmd(mmc, &cmd, NULL);
 483
 484                 if (err)
 485                         return err;
 486
 487                 mmc->ocr = cmd.response[0];
 488         }
 489
 490         mmc->version = MMC_VERSION_UNKNOWN;
 491
 492         mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS);
 493         mmc->rca = 1;
 494
 495         return 0;
 496 }
 497
 498
 499 static int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd)
 500 {
 501         struct mmc_cmd cmd;
 502         struct mmc_data data;
 503         int err;
 504
 505         /* Get the Card Status Register */
 506         cmd.cmdidx = MMC_CMD_SEND_EXT_CSD;
 507         cmd.resp_type = MMC_RSP_R1;
 508         cmd.cmdarg = 0;
 509
 510         data.dest = (char *)ext_csd;
 511         data.blocks = 1;
 512         data.blocksize = MMC_MAX_BLOCK_LEN;
 513         data.flags = MMC_DATA_READ;
 514
 515         err = mmc_send_cmd(mmc, &cmd, &data);
 516
 517         return err;
 518 }
 519
 520 int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
 521 {
 522         struct mmc_cmd cmd;
 523         int timeout = 1000;
 524         int retries = 3;
 525         int ret;
 526
 527         cmd.cmdidx = MMC_CMD_SWITCH;
 528         cmd.resp_type = MMC_RSP_R1b;
 529         cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
 530                                  (index << 16) |
 531                                  (value << 8);
 532
 533         while (retries > 0) {
 534                 ret = mmc_send_cmd(mmc, &cmd, NULL);
 535
 536                 /* Waiting for the ready status */
 537                 if (!ret) {
 538                         ret = mmc_send_status(mmc, timeout);
 539                         return ret;
 540                 }
 541
 542                 retries--;
 543         }
 544
 545         return ret;
 546
 547 }
 548
 549 static int mmc_change_freq(struct mmc *mmc)
 550 {
 551         ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
 552         char cardtype;
 553         int err;
 554
 555         mmc->card_caps = 0;
 556
 557         if (mmc_host_is_spi(mmc))
 558                 return 0;
 559
 560         /* Only version 4 supports high-speed */
 561         if (mmc->version < MMC_VERSION_4)
 562                 return 0;
 563
 564         mmc->card_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT;
 565
 566         err = mmc_send_ext_csd(mmc, ext_csd);
 567
 568         if (err)
 569                 return err;
 570
 571         cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0xf;
 572
 573         err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1);
 574
 575         if (err)
 576                 return err;
 577
 578         /* Now check to see that it worked */
 579         err = mmc_send_ext_csd(mmc, ext_csd);
 580
 581         if (err)
 582                 return err;
 583
 584         /* No high-speed support */
 585         if (!ext_csd[EXT_CSD_HS_TIMING])
 586                 return 0;
 587
 588         /* High Speed is set, there are two types: 52MHz and 26MHz */
 589         if (cardtype & EXT_CSD_CARD_TYPE_52) {
 590                 if (cardtype & EXT_CSD_CARD_TYPE_DDR_1_8V)
 591                         mmc->card_caps |= MMC_MODE_DDR_52MHz;
 592                 mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 593         } else {
 594                 mmc->card_caps |= MMC_MODE_HS;
 595         }
 596
 597         return 0;
 598 }
 599
 600 static int mmc_set_capacity(struct mmc *mmc, int part_num)
 601 {
 602         switch (part_num) {
 603         case 0:
 604                 mmc->capacity = mmc->capacity_user;
 605                 break;
 606         case 1:
 607         case 2:
 608                 mmc->capacity = mmc->capacity_boot;
 609                 break;
 610         case 3:
 611                 mmc->capacity = mmc->capacity_rpmb;
 612                 break;
 613         case 4:
 614         case 5:
 615         case 6:
 616         case 7:
 617                 mmc->capacity = mmc->capacity_gp[part_num - 4];
 618                 break;
 619         default:
 620                 return -1;
 621         }
 622
 623         mmc_get_blk_desc(mmc)->lba = lldiv(mmc->capacity, mmc->read_bl_len);
 624
 625         return 0;
 626 }
 627
 628 int mmc_switch_part(struct mmc *mmc, unsigned int part_num)
 629 {
 630         int ret;
 631
 632         ret = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF,
 633                          (mmc->part_config & ~PART_ACCESS_MASK)
 634                          | (part_num & PART_ACCESS_MASK));
 635
 636         /*
 637          * Set the capacity if the switch succeeded or was intended
 638          * to return to representing the raw device.
 639          */
 640         if ((ret == 0) || ((ret == -ENODEV) && (part_num == 0))) {
 641                 ret = mmc_set_capacity(mmc, part_num);
 642                 mmc_get_blk_desc(mmc)->hwpart = part_num;
 643         }
 644
 645         return ret;
 646 }
 647
 648 int mmc_hwpart_config(struct mmc *mmc,
 649                       const struct mmc_hwpart_conf *conf,
 650                       enum mmc_hwpart_conf_mode mode)
 651 {
 652         u8 part_attrs = 0;
 653         u32 enh_size_mult;
 654         u32 enh_start_addr;
 655         u32 gp_size_mult[4];
 656         u32 max_enh_size_mult;
 657         u32 tot_enh_size_mult = 0;
 658         u8 wr_rel_set;
 659         int i, pidx, err;
 660         ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
 661
 662         if (mode < MMC_HWPART_CONF_CHECK || mode > MMC_HWPART_CONF_COMPLETE)
 663                 return -EINVAL;
 664
 665         if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4_41)) {
 666                 printf("eMMC >= 4.4 required for enhanced user data area\n");
 667                 return -EMEDIUMTYPE;
 668         }
 669
 670         if (!(mmc->part_support & PART_SUPPORT)) {
 671                 printf("Card does not support partitioning\n");
 672                 return -EMEDIUMTYPE;
 673         }
 674
 675         if (!mmc->hc_wp_grp_size) {
 676                 printf("Card does not define HC WP group size\n");
 677                 return -EMEDIUMTYPE;
 678         }
 679
 680         /* check partition alignment and total enhanced size */
 681         if (conf->user.enh_size) {
 682                 if (conf->user.enh_size % mmc->hc_wp_grp_size ||
 683                     conf->user.enh_start % mmc->hc_wp_grp_size) {
 684                         printf("User data enhanced area not HC WP group "
 685                                "size aligned\n");
 686                         return -EINVAL;
 687                 }
 688                 part_attrs |= EXT_CSD_ENH_USR;
 689                 enh_size_mult = conf->user.enh_size / mmc->hc_wp_grp_size;
 690                 if (mmc->high_capacity) {
 691                         enh_start_addr = conf->user.enh_start;
 692                 } else {
 693                         enh_start_addr = (conf->user.enh_start << 9);
 694                 }
 695         } else {
 696                 enh_size_mult = 0;
 697                 enh_start_addr = 0;
 698         }
 699         tot_enh_size_mult += enh_size_mult;
 700
 701         for (pidx = 0; pidx < 4; pidx++) {
 702                 if (conf->gp_part[pidx].size % mmc->hc_wp_grp_size) {
 703                         printf("GP%i partition not HC WP group size "
 704                                "aligned\n", pidx+1);
 705                         return -EINVAL;
 706                 }
 707                 gp_size_mult[pidx] = conf->gp_part[pidx].size / mmc->hc_wp_grp_size;
 708                 if (conf->gp_part[pidx].size && conf->gp_part[pidx].enhanced) {
 709                         part_attrs |= EXT_CSD_ENH_GP(pidx);
 710                         tot_enh_size_mult += gp_size_mult[pidx];
 711                 }
 712         }
 713
 714         if (part_attrs && ! (mmc->part_support & ENHNCD_SUPPORT)) {
 715                 printf("Card does not support enhanced attribute\n");
 716                 return -EMEDIUMTYPE;
 717         }
 718
 719         err = mmc_send_ext_csd(mmc, ext_csd);
 720         if (err)
 721                 return err;
 722
 723         max_enh_size_mult =
 724                 (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+2] << 16) +
 725                 (ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+1] << 8) +
 726                 ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT];
 727         if (tot_enh_size_mult > max_enh_size_mult) {
 728                 printf("Total enhanced size exceeds maximum (%u > %u)\n",
 729                        tot_enh_size_mult, max_enh_size_mult);
 730                 return -EMEDIUMTYPE;
 731         }
 732
 733         /* The default value of EXT_CSD_WR_REL_SET is device
 734          * dependent, the values can only be changed if the
 735          * EXT_CSD_HS_CTRL_REL bit is set. The values can be
 736          * changed only once and before partitioning is completed. */
 737         wr_rel_set = ext_csd[EXT_CSD_WR_REL_SET];
 738         if (conf->user.wr_rel_change) {
 739                 if (conf->user.wr_rel_set)
 740                         wr_rel_set |= EXT_CSD_WR_DATA_REL_USR;
 741                 else
 742                         wr_rel_set &= ~EXT_CSD_WR_DATA_REL_USR;
 743         }
 744         for (pidx = 0; pidx < 4; pidx++) {
 745                 if (conf->gp_part[pidx].wr_rel_change) {
 746                         if (conf->gp_part[pidx].wr_rel_set)
 747                                 wr_rel_set |= EXT_CSD_WR_DATA_REL_GP(pidx);
 748                         else
 749                                 wr_rel_set &= ~EXT_CSD_WR_DATA_REL_GP(pidx);
 750                 }
 751         }
 752
 753         if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET] &&
 754             !(ext_csd[EXT_CSD_WR_REL_PARAM] & EXT_CSD_HS_CTRL_REL)) {
 755                 puts("Card does not support host controlled partition write "
 756                      "reliability settings\n");
 757                 return -EMEDIUMTYPE;
 758         }
 759
 760         if (ext_csd[EXT_CSD_PARTITION_SETTING] &
 761             EXT_CSD_PARTITION_SETTING_COMPLETED) {
 762                 printf("Card already partitioned\n");
 763                 return -EPERM;
 764         }
 765
 766         if (mode == MMC_HWPART_CONF_CHECK)
 767                 return 0;
 768
 769         /* Partitioning requires high-capacity size definitions */
 770         if (!(ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01)) {
 771                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
 772                                  EXT_CSD_ERASE_GROUP_DEF, 1);
 773
 774                 if (err)
 775                         return err;
 776
 777                 ext_csd[EXT_CSD_ERASE_GROUP_DEF] = 1;
 778
 779                 /* update erase group size to be high-capacity */
 780                 mmc->erase_grp_size =
 781                         ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024;
 782
 783         }
 784
 785         /* all OK, write the configuration */
 786         for (i = 0; i < 4; i++) {
 787                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
 788                                  EXT_CSD_ENH_START_ADDR+i,
 789                                  (enh_start_addr >> (i*8)) & 0xFF);
 790                 if (err)
 791                         return err;
 792         }
 793         for (i = 0; i < 3; i++) {
 794                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
 795                                  EXT_CSD_ENH_SIZE_MULT+i,
 796                                  (enh_size_mult >> (i*8)) & 0xFF);
 797                 if (err)
 798                         return err;
 799         }
 800         for (pidx = 0; pidx < 4; pidx++) {
 801                 for (i = 0; i < 3; i++) {
 802                         err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
 803                                          EXT_CSD_GP_SIZE_MULT+pidx*3+i,
 804                                          (gp_size_mult[pidx] >> (i*8)) & 0xFF);
 805                         if (err)
 806                                 return err;
 807                 }
 808         }
 809         err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
 810                          EXT_CSD_PARTITIONS_ATTRIBUTE, part_attrs);
 811         if (err)
 812                 return err;
 813
 814         if (mode == MMC_HWPART_CONF_SET)
 815                 return 0;
 816
 817         /* The WR_REL_SET is a write-once register but shall be
 818          * written before setting PART_SETTING_COMPLETED. As it is
 819          * write-once we can only write it when completing the
 820          * partitioning. */
 821         if (wr_rel_set != ext_csd[EXT_CSD_WR_REL_SET]) {
 822                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
 823                                  EXT_CSD_WR_REL_SET, wr_rel_set);
 824                 if (err)
 825                         return err;
 826         }
 827
 828         /* Setting PART_SETTING_COMPLETED confirms the partition
 829          * configuration but it only becomes effective after power
 830          * cycle, so we do not adjust the partition related settings
 831          * in the mmc struct. */
 832
 833         err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
 834                          EXT_CSD_PARTITION_SETTING,
 835                          EXT_CSD_PARTITION_SETTING_COMPLETED);
 836         if (err)
 837                 return err;
 838
 839         return 0;
 840 }
 841
 842 #if !CONFIG_IS_ENABLED(DM_MMC)
 843 int mmc_getcd(struct mmc *mmc)
 844 {
 845         int cd;
 846
 847         cd = board_mmc_getcd(mmc);
 848
 849         if (cd < 0) {
 850                 if (mmc->cfg->ops->getcd)
 851                         cd = mmc->cfg->ops->getcd(mmc);
 852                 else
 853                         cd = 1;
 854         }
 855
 856         return cd;
 857 }
 858 #endif
 859
 860 static int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
 861 {
 862         struct mmc_cmd cmd;
 863         struct mmc_data data;
 864
 865         /* Switch the frequency */
 866         cmd.cmdidx = SD_CMD_SWITCH_FUNC;
 867         cmd.resp_type = MMC_RSP_R1;
 868         cmd.cmdarg = (mode << 31) | 0xffffff;
 869         cmd.cmdarg &= ~(0xf << (group * 4));
 870         cmd.cmdarg |= value << (group * 4);
 871
 872         data.dest = (char *)resp;
 873         data.blocksize = 64;
 874         data.blocks = 1;
 875         data.flags = MMC_DATA_READ;
 876
 877         return mmc_send_cmd(mmc, &cmd, &data);
 878 }
 879
 880
 881 static int sd_change_freq(struct mmc *mmc)
 882 {
 883         int err;
 884         struct mmc_cmd cmd;
 885         ALLOC_CACHE_ALIGN_BUFFER(__be32, scr, 2);
 886         ALLOC_CACHE_ALIGN_BUFFER(__be32, switch_status, 16);
 887         struct mmc_data data;
 888         int timeout;
 889
 890         mmc->card_caps = 0;
 891
 892         if (mmc_host_is_spi(mmc))
 893                 return 0;
 894
 895         /* Read the SCR to find out if this card supports higher speeds */
 896         cmd.cmdidx = MMC_CMD_APP_CMD;
 897         cmd.resp_type = MMC_RSP_R1;
 898         cmd.cmdarg = mmc->rca << 16;
 899
 900         err = mmc_send_cmd(mmc, &cmd, NULL);
 901
 902         if (err)
 903                 return err;
 904
 905         cmd.cmdidx = SD_CMD_APP_SEND_SCR;
 906         cmd.resp_type = MMC_RSP_R1;
 907         cmd.cmdarg = 0;
 908
 909         timeout = 3;
 910
 911 retry_scr:
 912         data.dest = (char *)scr;
 913         data.blocksize = 8;
 914         data.blocks = 1;
 915         data.flags = MMC_DATA_READ;
 916
 917         err = mmc_send_cmd(mmc, &cmd, &data);
 918
 919         if (err) {
 920                 if (timeout--)
 921                         goto retry_scr;
 922
 923                 return err;
 924         }
 925
 926         mmc->scr[0] = __be32_to_cpu(scr[0]);
 927         mmc->scr[1] = __be32_to_cpu(scr[1]);
 928
 929         switch ((mmc->scr[0] >> 24) & 0xf) {
 930         case 0:
 931                 mmc->version = SD_VERSION_1_0;
 932                 break;
 933         case 1:
 934                 mmc->version = SD_VERSION_1_10;
 935                 break;
 936         case 2:
 937                 mmc->version = SD_VERSION_2;
 938                 if ((mmc->scr[0] >> 15) & 0x1)
 939                         mmc->version = SD_VERSION_3;
 940                 break;
 941         default:
 942                 mmc->version = SD_VERSION_1_0;
 943                 break;
 944         }
 945
 946         if (mmc->scr[0] & SD_DATA_4BIT)
 947                 mmc->card_caps |= MMC_MODE_4BIT;
 948
 949         /* Version 1.0 doesn't support switching */
 950         if (mmc->version == SD_VERSION_1_0)
 951                 return 0;
 952
 953         timeout = 4;
 954         while (timeout--) {
 955                 err = sd_switch(mmc, SD_SWITCH_CHECK, 0, 1,
 956                                 (u8 *)switch_status);
 957
 958                 if (err)
 959                         return err;
 960
 961                 /* The high-speed function is busy.  Try again */
 962                 if (!(__be32_to_cpu(switch_status[7]) & SD_HIGHSPEED_BUSY))
 963                         break;
 964         }
 965
 966         /* If high-speed isn't supported, we return */
 967         if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED))
 968                 return 0;
 969
 970         /*
 971          * If the host doesn't support SD_HIGHSPEED, do not switch card to
 972          * HIGHSPEED mode even if the card support SD_HIGHSPPED.
 973          * This can avoid furthur problem when the card runs in different
 974          * mode between the host.
 975          */
 976         if (!((mmc->cfg->host_caps & MMC_MODE_HS_52MHz) &&
 977                 (mmc->cfg->host_caps & MMC_MODE_HS)))
 978                 return 0;
 979
 980         err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)switch_status);
 981
 982         if (err)
 983                 return err;
 984
 985         if ((__be32_to_cpu(switch_status[4]) & 0x0f000000) == 0x01000000)
 986                 mmc->card_caps |= MMC_MODE_HS;
 987
 988         return 0;
 989 }
 990
 991 static int sd_read_ssr(struct mmc *mmc)
 992 {
 993         int err, i;
 994         struct mmc_cmd cmd;
 995         ALLOC_CACHE_ALIGN_BUFFER(uint, ssr, 16);
 996         struct mmc_data data;
 997         int timeout = 3;
 998         unsigned int au, eo, et, es;
 999
1000         cmd.cmdidx = MMC_CMD_APP_CMD;
1001         cmd.resp_type = MMC_RSP_R1;
1002         cmd.cmdarg = mmc->rca << 16;
1003
1004         err = mmc_send_cmd(mmc, &cmd, NULL);
1005         if (err)
1006                 return err;
1007
1008         cmd.cmdidx = SD_CMD_APP_SD_STATUS;
1009         cmd.resp_type = MMC_RSP_R1;
1010         cmd.cmdarg = 0;
1011
1012 retry_ssr:
1013         data.dest = (char *)ssr;
1014         data.blocksize = 64;
1015         data.blocks = 1;
1016         data.flags = MMC_DATA_READ;
1017
1018         err = mmc_send_cmd(mmc, &cmd, &data);
1019         if (err) {
1020                 if (timeout--)
1021                         goto retry_ssr;
1022
1023                 return err;
1024         }
1025
1026         for (i = 0; i < 16; i++)
1027                 ssr[i] = be32_to_cpu(ssr[i]);
1028
1029         au = (ssr[2] >> 12) & 0xF;
1030         if ((au <= 9) || (mmc->version == SD_VERSION_3)) {
1031                 mmc->ssr.au = sd_au_size[au];
1032                 es = (ssr[3] >> 24) & 0xFF;
1033                 es |= (ssr[2] & 0xFF) << 8;
1034                 et = (ssr[3] >> 18) & 0x3F;
1035                 if (es && et) {
1036                         eo = (ssr[3] >> 16) & 0x3;
1037                         mmc->ssr.erase_timeout = (et * 1000) / es;
1038                         mmc->ssr.erase_offset = eo * 1000;
1039                 }
1040         } else {
1041                 debug("Invalid Allocation Unit Size.\n");
1042         }
1043
1044         return 0;
1045 }
1046
1047 /* frequency bases */
1048 /* divided by 10 to be nice to platforms without floating point */
1049 static const int fbase[] = {
1050         10000,
1051         100000,
1052         1000000,
1053         10000000,
1054 };
1055
1056 /* Multiplier values for TRAN_SPEED.  Multiplied by 10 to be nice
1057  * to platforms without floating point.
1058  */
1059 static const u8 multipliers[] = {
1060         0,      /* reserved */
1061         10,
1062         12,
1063         13,
1064         15,
1065         20,
1066         25,
1067         30,
1068         35,
1069         40,
1070         45,
1071         50,
1072         55,
1073         60,
1074         70,
1075         80,
1076 };
1077
1078 #if !CONFIG_IS_ENABLED(DM_MMC)
1079 static void mmc_set_ios(struct mmc *mmc)
1080 {
1081         if (mmc->cfg->ops->set_ios)
1082                 mmc->cfg->ops->set_ios(mmc);
1083 }
1084 #endif
1085
1086 void mmc_set_clock(struct mmc *mmc, uint clock)
1087 {
1088         if (clock > mmc->cfg->f_max)
1089                 clock = mmc->cfg->f_max;
1090
1091         if (clock < mmc->cfg->f_min)
1092                 clock = mmc->cfg->f_min;
1093
1094         mmc->clock = clock;
1095
1096         mmc_set_ios(mmc);
1097 }
1098
1099 static void mmc_set_bus_width(struct mmc *mmc, uint width)
1100 {
1101         mmc->bus_width = width;
1102
1103         mmc_set_ios(mmc);
1104 }
1105
1106 static int sd_select_bus_freq_width(struct mmc *mmc)
1107 {
1108         int err;
1109         struct mmc_cmd cmd;
1110
1111         err = sd_change_freq(mmc);
1112         if (err)
1113                 return err;
1114
1115         /* Restrict card's capabilities by what the host can do */
1116         mmc->card_caps &= mmc->cfg->host_caps;
1117
1118         if (mmc->card_caps & MMC_MODE_4BIT) {
1119                 cmd.cmdidx = MMC_CMD_APP_CMD;
1120                 cmd.resp_type = MMC_RSP_R1;
1121                 cmd.cmdarg = mmc->rca << 16;
1122
1123                 err = mmc_send_cmd(mmc, &cmd, NULL);
1124                 if (err)
1125                         return err;
1126
1127                 cmd.cmdidx = SD_CMD_APP_SET_BUS_WIDTH;
1128                 cmd.resp_type = MMC_RSP_R1;
1129                 cmd.cmdarg = 2;
1130                 err = mmc_send_cmd(mmc, &cmd, NULL);
1131                 if (err)
1132                         return err;
1133
1134                 mmc_set_bus_width(mmc, 4);
1135         }
1136
1137         err = sd_read_ssr(mmc);
1138         if (err)
1139                 return err;
1140
1141         if (mmc->card_caps & MMC_MODE_HS)
1142                 mmc->tran_speed = 50000000;
1143         else
1144                 mmc->tran_speed = 25000000;
1145
1146         return 0;
1147 }
1148
1149 static int mmc_select_bus_freq_width(struct mmc *mmc, const u8 *ext_csd)
1150 {
1151         ALLOC_CACHE_ALIGN_BUFFER(u8, test_csd, MMC_MAX_BLOCK_LEN);
1152         /* An array of possible bus widths in order of preference */
1153         static const unsigned int ext_csd_bits[] = {
1154                 EXT_CSD_DDR_BUS_WIDTH_8,
1155                 EXT_CSD_DDR_BUS_WIDTH_4,
1156                 EXT_CSD_BUS_WIDTH_8,
1157                 EXT_CSD_BUS_WIDTH_4,
1158                 EXT_CSD_BUS_WIDTH_1,
1159         };
1160         /* An array to map CSD bus widths to host cap bits */
1161         static const unsigned int ext_to_hostcaps[] = {
1162                 [EXT_CSD_DDR_BUS_WIDTH_4] =
1163                         MMC_MODE_DDR_52MHz | MMC_MODE_4BIT,
1164                 [EXT_CSD_DDR_BUS_WIDTH_8] =
1165                         MMC_MODE_DDR_52MHz | MMC_MODE_8BIT,
1166                 [EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT,
1167                 [EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT,
1168         };
1169         /* An array to map chosen bus width to an integer */
1170         static const unsigned int widths[] = {
1171                 8, 4, 8, 4, 1,
1172         };
1173         int err;
1174         int idx;
1175
1176         err = mmc_change_freq(mmc);
1177         if (err)
1178                 return err;
1179
1180         /* Restrict card's capabilities by what the host can do */
1181         mmc->card_caps &= mmc->cfg->host_caps;
1182
1183         /* Only version 4 of MMC supports wider bus widths */
1184         if (mmc->version < MMC_VERSION_4)
1185                 return 0;
1186
1187         for (idx = 0; idx < ARRAY_SIZE(ext_csd_bits); idx++) {
1188                 unsigned int extw = ext_csd_bits[idx];
1189                 unsigned int caps = ext_to_hostcaps[extw];
1190                 /*
1191                  * If the bus width is still not changed,
1192                  * don't try to set the default again.
1193                  * Otherwise, recover from switch attempts
1194                  * by switching to 1-bit bus width.
1195                  */
1196                 if (extw == EXT_CSD_BUS_WIDTH_1 &&
1197                     mmc->bus_width == 1) {
1198                         err = 0;
1199                         break;
1200                 }
1201
1202                 /*
1203                  * Check to make sure the card and controller support
1204                  * these capabilities
1205                  */
1206                 if ((mmc->card_caps & caps) != caps)
1207                         continue;
1208
1209                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1210                                  EXT_CSD_BUS_WIDTH, extw);
1211
1212                 if (err)
1213                         continue;
1214
1215                 mmc->ddr_mode = (caps & MMC_MODE_DDR_52MHz) ? 1 : 0;
1216                 mmc_set_bus_width(mmc, widths[idx]);
1217
1218                 err = mmc_send_ext_csd(mmc, test_csd);
1219
1220                 if (err)
1221                         continue;
1222
1223                 /* Only compare read only fields */
1224                 if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT]
1225                         == test_csd[EXT_CSD_PARTITIONING_SUPPORT] &&
1226                     ext_csd[EXT_CSD_HC_WP_GRP_SIZE]
1227                         == test_csd[EXT_CSD_HC_WP_GRP_SIZE] &&
1228                     ext_csd[EXT_CSD_REV]
1229                         == test_csd[EXT_CSD_REV] &&
1230                     ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
1231                         == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE] &&
1232                     memcmp(&ext_csd[EXT_CSD_SEC_CNT],
1233                            &test_csd[EXT_CSD_SEC_CNT], 4) == 0)
1234                         break;
1235
1236                 err = -EBADMSG;
1237         }
1238
1239         if (err)
1240                 return err;
1241
1242         if (mmc->card_caps & MMC_MODE_HS) {
1243                 if (mmc->card_caps & MMC_MODE_HS_52MHz)
1244                         mmc->tran_speed = 52000000;
1245                 else
1246                         mmc->tran_speed = 26000000;
1247         }
1248
1249         return err;
1250 }
1251
1252 static int mmc_startup_v4(struct mmc *mmc, u8 *ext_csd)
1253 {
1254         int err, i;
1255         u64 capacity;
1256         bool has_parts = false;
1257         bool part_completed;
1258
1259         if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4))
1260                 return 0;
1261
1262         /* check  ext_csd version and capacity */
1263         err = mmc_send_ext_csd(mmc, ext_csd);
1264         if (err)
1265                 return err;
1266         if (ext_csd[EXT_CSD_REV] >= 2) {
1267                 /*
1268                  * According to the JEDEC Standard, the value of
1269                  * ext_csd's capacity is valid if the value is more
1270                  * than 2GB
1271                  */
1272                 capacity = ext_csd[EXT_CSD_SEC_CNT] << 0
1273                                 | ext_csd[EXT_CSD_SEC_CNT + 1] << 8
1274                                 | ext_csd[EXT_CSD_SEC_CNT + 2] << 16
1275                                 | ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
1276                 capacity *= MMC_MAX_BLOCK_LEN;
1277                 if ((capacity >> 20) > 2 * 1024)
1278                         mmc->capacity_user = capacity;
1279         }
1280
1281         switch (ext_csd[EXT_CSD_REV]) {
1282         case 1:
1283                 mmc->version = MMC_VERSION_4_1;
1284                 break;
1285         case 2:
1286                 mmc->version = MMC_VERSION_4_2;
1287                 break;
1288         case 3:
1289                 mmc->version = MMC_VERSION_4_3;
1290                 break;
1291         case 5:
1292                 mmc->version = MMC_VERSION_4_41;
1293                 break;
1294         case 6:
1295                 mmc->version = MMC_VERSION_4_5;
1296                 break;
1297         case 7:
1298                 mmc->version = MMC_VERSION_5_0;
1299                 break;
1300         case 8:
1301                 mmc->version = MMC_VERSION_5_1;
1302                 break;
1303         }
1304
1305         /* The partition data may be non-zero but it is only
1306          * effective if PARTITION_SETTING_COMPLETED is set in
1307          * EXT_CSD, so ignore any data if this bit is not set,
1308          * except for enabling the high-capacity group size
1309          * definition (see below).
1310          */
1311         part_completed = !!(ext_csd[EXT_CSD_PARTITION_SETTING] &
1312                             EXT_CSD_PARTITION_SETTING_COMPLETED);
1313
1314         /* store the partition info of emmc */
1315         mmc->part_support = ext_csd[EXT_CSD_PARTITIONING_SUPPORT];
1316         if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
1317             ext_csd[EXT_CSD_BOOT_MULT])
1318                 mmc->part_config = ext_csd[EXT_CSD_PART_CONF];
1319         if (part_completed &&
1320             (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & ENHNCD_SUPPORT))
1321                 mmc->part_attr = ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE];
1322
1323         mmc->capacity_boot = ext_csd[EXT_CSD_BOOT_MULT] << 17;
1324
1325         mmc->capacity_rpmb = ext_csd[EXT_CSD_RPMB_MULT] << 17;
1326
1327         for (i = 0; i < 4; i++) {
1328                 int idx = EXT_CSD_GP_SIZE_MULT + i * 3;
1329                 uint mult = (ext_csd[idx + 2] << 16) +
1330                         (ext_csd[idx + 1] << 8) + ext_csd[idx];
1331                 if (mult)
1332                         has_parts = true;
1333                 if (!part_completed)
1334                         continue;
1335                 mmc->capacity_gp[i] = mult;
1336                 mmc->capacity_gp[i] *=
1337                         ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
1338                 mmc->capacity_gp[i] *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
1339                 mmc->capacity_gp[i] <<= 19;
1340         }
1341
1342         if (part_completed) {
1343                 mmc->enh_user_size =
1344                         (ext_csd[EXT_CSD_ENH_SIZE_MULT + 2] << 16) +
1345                         (ext_csd[EXT_CSD_ENH_SIZE_MULT + 1] << 8) +
1346                         ext_csd[EXT_CSD_ENH_SIZE_MULT];
1347                 mmc->enh_user_size *= ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
1348                 mmc->enh_user_size *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
1349                 mmc->enh_user_size <<= 19;
1350                 mmc->enh_user_start =
1351                         (ext_csd[EXT_CSD_ENH_START_ADDR + 3] << 24) +
1352                         (ext_csd[EXT_CSD_ENH_START_ADDR + 2] << 16) +
1353                         (ext_csd[EXT_CSD_ENH_START_ADDR + 1] << 8) +
1354                         ext_csd[EXT_CSD_ENH_START_ADDR];
1355                 if (mmc->high_capacity)
1356                         mmc->enh_user_start <<= 9;
1357         }
1358
1359         /*
1360          * Host needs to enable ERASE_GRP_DEF bit if device is
1361          * partitioned. This bit will be lost every time after a reset
1362          * or power off. This will affect erase size.
1363          */
1364         if (part_completed)
1365                 has_parts = true;
1366         if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) &&
1367             (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & PART_ENH_ATTRIB))
1368                 has_parts = true;
1369         if (has_parts) {
1370                 err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
1371                                  EXT_CSD_ERASE_GROUP_DEF, 1);
1372
1373                 if (err)
1374                         return err;
1375
1376                 ext_csd[EXT_CSD_ERASE_GROUP_DEF] = 1;
1377         }
1378
1379         if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) {
1380                 /* Read out group size from ext_csd */
1381                 mmc->erase_grp_size =
1382                         ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024;
1383                 /*
1384                  * if high capacity and partition setting completed
1385                  * SEC_COUNT is valid even if it is smaller than 2 GiB
1386                  * JEDEC Standard JESD84-B45, 6.2.4
1387                  */
1388                 if (mmc->high_capacity && part_completed) {
1389                         capacity = (ext_csd[EXT_CSD_SEC_CNT]) |
1390                                 (ext_csd[EXT_CSD_SEC_CNT + 1] << 8) |
1391                                 (ext_csd[EXT_CSD_SEC_CNT + 2] << 16) |
1392                                 (ext_csd[EXT_CSD_SEC_CNT + 3] << 24);
1393                         capacity *= MMC_MAX_BLOCK_LEN;
1394                         mmc->capacity_user = capacity;
1395                 }
1396         } else {
1397                 /* Calculate the group size from the csd value. */
1398                 int erase_gsz, erase_gmul;
1399
1400                 erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
1401                 erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5;
1402                 mmc->erase_grp_size = (erase_gsz + 1)
1403                         * (erase_gmul + 1);
1404         }
1405
1406         mmc->hc_wp_grp_size = 1024
1407                 * ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
1408                 * ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
1409
1410         mmc->wr_rel_set = ext_csd[EXT_CSD_WR_REL_SET];
1411
1412         return 0;
1413 }
1414
1415 static int mmc_startup(struct mmc *mmc)
1416 {
1417         int err, i;
1418         uint mult, freq;
1419         u64 cmult, csize;
1420         struct mmc_cmd cmd;
1421         ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
1422         struct blk_desc *bdesc;
1423
1424 #ifdef CONFIG_MMC_SPI_CRC_ON
1425         if (mmc_host_is_spi(mmc)) { /* enable CRC check for spi */
1426                 cmd.cmdidx = MMC_CMD_SPI_CRC_ON_OFF;
1427                 cmd.resp_type = MMC_RSP_R1;
1428                 cmd.cmdarg = 1;
1429                 err = mmc_send_cmd(mmc, &cmd, NULL);
1430
1431                 if (err)
1432                         return err;
1433         }
1434 #endif
1435
1436         /* Put the Card in Identify Mode */
1437         cmd.cmdidx = mmc_host_is_spi(mmc) ? MMC_CMD_SEND_CID :
1438                 MMC_CMD_ALL_SEND_CID; /* cmd not supported in spi */
1439         cmd.resp_type = MMC_RSP_R2;
1440         cmd.cmdarg = 0;
1441
1442         err = mmc_send_cmd(mmc, &cmd, NULL);
1443
1444         if (err)
1445                 return err;
1446
1447         memcpy(mmc->cid, cmd.response, 16);
1448
1449         /*
1450          * For MMC cards, set the Relative Address.
1451          * For SD cards, get the Relatvie Address.
1452          * This also puts the cards into Standby State
1453          */
1454         if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
1455                 cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR;
1456                 cmd.cmdarg = mmc->rca << 16;
1457                 cmd.resp_type = MMC_RSP_R6;
1458
1459                 err = mmc_send_cmd(mmc, &cmd, NULL);
1460
1461                 if (err)
1462                         return err;
1463
1464                 if (IS_SD(mmc))
1465                         mmc->rca = (cmd.response[0] >> 16) & 0xffff;
1466         }
1467
1468         /* Get the Card-Specific Data */
1469         cmd.cmdidx = MMC_CMD_SEND_CSD;
1470         cmd.resp_type = MMC_RSP_R2;
1471         cmd.cmdarg = mmc->rca << 16;
1472
1473         err = mmc_send_cmd(mmc, &cmd, NULL);
1474
1475         if (err)
1476                 return err;
1477
1478         mmc->csd[0] = cmd.response[0];
1479         mmc->csd[1] = cmd.response[1];
1480         mmc->csd[2] = cmd.response[2];
1481         mmc->csd[3] = cmd.response[3];
1482
1483         if (mmc->version == MMC_VERSION_UNKNOWN) {
1484                 int version = (cmd.response[0] >> 26) & 0xf;
1485
1486                 switch (version) {
1487                 case 0:
1488                         mmc->version = MMC_VERSION_1_2;
1489                         break;
1490                 case 1:
1491                         mmc->version = MMC_VERSION_1_4;
1492                         break;
1493                 case 2:
1494                         mmc->version = MMC_VERSION_2_2;
1495                         break;
1496                 case 3:
1497                         mmc->version = MMC_VERSION_3;
1498                         break;
1499                 case 4:
1500                         mmc->version = MMC_VERSION_4;
1501                         break;
1502                 default:
1503                         mmc->version = MMC_VERSION_1_2;
1504                         break;
1505                 }
1506         }
1507
1508         /* divide frequency by 10, since the mults are 10x bigger */
1509         freq = fbase[(cmd.response[0] & 0x7)];
1510         mult = multipliers[((cmd.response[0] >> 3) & 0xf)];
1511
1512         mmc->tran_speed = freq * mult;
1513
1514         mmc->dsr_imp = ((cmd.response[1] >> 12) & 0x1);
1515         mmc->read_bl_len = 1 << ((cmd.response[1] >> 16) & 0xf);
1516
1517         if (IS_SD(mmc))
1518                 mmc->write_bl_len = mmc->read_bl_len;
1519         else
1520                 mmc->write_bl_len = 1 << ((cmd.response[3] >> 22) & 0xf);
1521
1522         if (mmc->high_capacity) {
1523                 csize = (mmc->csd[1] & 0x3f) << 16
1524                         | (mmc->csd[2] & 0xffff0000) >> 16;
1525                 cmult = 8;
1526         } else {
1527                 csize = (mmc->csd[1] & 0x3ff) << 2
1528                         | (mmc->csd[2] & 0xc0000000) >> 30;
1529                 cmult = (mmc->csd[2] & 0x00038000) >> 15;
1530         }
1531
1532         mmc->capacity_user = (csize + 1) << (cmult + 2);
1533         mmc->capacity_user *= mmc->read_bl_len;
1534         mmc->capacity_boot = 0;
1535         mmc->capacity_rpmb = 0;
1536         for (i = 0; i < 4; i++)
1537                 mmc->capacity_gp[i] = 0;
1538
1539         if (mmc->read_bl_len > MMC_MAX_BLOCK_LEN)
1540                 mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
1541
1542         if (mmc->write_bl_len > MMC_MAX_BLOCK_LEN)
1543                 mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
1544
1545         if ((mmc->dsr_imp) && (0xffffffff != mmc->dsr)) {
1546                 cmd.cmdidx = MMC_CMD_SET_DSR;
1547                 cmd.cmdarg = (mmc->dsr & 0xffff) << 16;
1548                 cmd.resp_type = MMC_RSP_NONE;
1549                 if (mmc_send_cmd(mmc, &cmd, NULL))
1550                         printf("MMC: SET_DSR failed\n");
1551         }
1552
1553         /* Select the card, and put it into Transfer Mode */
1554         if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */
1555                 cmd.cmdidx = MMC_CMD_SELECT_CARD;
1556                 cmd.resp_type = MMC_RSP_R1;
1557                 cmd.cmdarg = mmc->rca << 16;
1558                 err = mmc_send_cmd(mmc, &cmd, NULL);
1559
1560                 if (err)
1561                         return err;
1562         }
1563
1564         /*
1565          * For SD, its erase group is always one sector
1566          */
1567         mmc->erase_grp_size = 1;
1568         mmc->part_config = MMCPART_NOAVAILABLE;
1569
1570         err = mmc_startup_v4(mmc, ext_csd);
1571         if (err)
1572                 return err;
1573
1574         err = mmc_set_capacity(mmc, mmc_get_blk_desc(mmc)->hwpart);
1575         if (err)
1576                 return err;
1577
1578         if (IS_SD(mmc))
1579                 err = sd_select_bus_freq_width(mmc);
1580         else
1581                 err = mmc_select_bus_freq_width(mmc, ext_csd);
1582
1583         if (err)
1584                 return err;
1585
1586         mmc_set_clock(mmc, mmc->tran_speed);
1587
1588         /* Fix the block length for DDR mode */
1589         if (mmc->ddr_mode) {
1590                 mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
1591                 mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
1592         }
1593
1594         /* fill in device description */
1595         bdesc = mmc_get_blk_desc(mmc);
1596         bdesc->lun = 0;
1597         bdesc->hwpart = 0;
1598         bdesc->type = 0;
1599         bdesc->blksz = mmc->read_bl_len;
1600         bdesc->log2blksz = LOG2(bdesc->blksz);
1601         bdesc->lba = lldiv(mmc->capacity, mmc->read_bl_len);
1602 #if !defined(CONFIG_SPL_BUILD) || \
1603                 (defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && \
1604                 !defined(CONFIG_USE_TINY_PRINTF))
1605         sprintf(bdesc->vendor, "Man %06x Snr %04x%04x",
1606                 mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff),
1607                 (mmc->cid[3] >> 16) & 0xffff);
1608         sprintf(bdesc->product, "%c%c%c%c%c%c", mmc->cid[0] & 0xff,
1609                 (mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff,
1610                 (mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff,
1611                 (mmc->cid[2] >> 24) & 0xff);
1612         sprintf(bdesc->revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf,
1613                 (mmc->cid[2] >> 16) & 0xf);
1614 #else
1615         bdesc->vendor[0] = 0;
1616         bdesc->product[0] = 0;
1617         bdesc->revision[0] = 0;
1618 #endif
1619 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)
1620         part_init(bdesc);
1621 #endif
1622
1623         return 0;
1624 }
1625
1626 static int mmc_send_if_cond(struct mmc *mmc)
1627 {
1628         struct mmc_cmd cmd;
1629         int err;
1630
1631         cmd.cmdidx = SD_CMD_SEND_IF_COND;
1632         /* We set the bit if the host supports voltages between 2.7 and 3.6 V */
1633         cmd.cmdarg = ((mmc->cfg->voltages & 0xff8000) != 0) << 8 | 0xaa;
1634         cmd.resp_type = MMC_RSP_R7;
1635
1636         err = mmc_send_cmd(mmc, &cmd, NULL);
1637
1638         if (err)
1639                 return err;
1640
1641         if ((cmd.response[0] & 0xff) != 0xaa)
1642                 return -EOPNOTSUPP;
1643         else
1644                 mmc->version = SD_VERSION_2;
1645
1646         return 0;
1647 }
1648
1649 #if !CONFIG_IS_ENABLED(DM_MMC)
1650 /* board-specific MMC power initializations. */
1651 __weak void board_mmc_power_init(void)
1652 {
1653 }
1654 #endif
1655
1656 static int mmc_power_init(struct mmc *mmc)
1657 {
1658 #if CONFIG_IS_ENABLED(DM_MMC)
1659 #if CONFIG_IS_ENABLED(DM_REGULATOR)
1660         int ret;
1661
1662         ret = device_get_supply_regulator(mmc->dev, "vmmc-supply",
1663                                           &mmc->vmmc_supply);
1664         if (ret)
1665                 debug("%s: No vmmc supply\n", mmc->dev->name);
1666
1667         ret = device_get_supply_regulator(mmc->dev, "vqmmc-supply",
1668                                           &mmc->vqmmc_supply);
1669         if (ret)
1670                 debug("%s: No vqmmc supply\n", mmc->dev->name);
1671
1672         if (mmc->vmmc_supply) {
1673                 ret = regulator_set_enable(mmc->vmmc_supply, true);
1674                 if (ret) {
1675                         puts("Error enabling VMMC supply\n");
1676                         return ret;
1677                 }
1678         }
1679 #endif
1680 #else /* !CONFIG_DM_MMC */
1681         /*
1682          * Driver model should use a regulator, as above, rather than calling
1683          * out to board code.
1684          */
1685         board_mmc_power_init();
1686 #endif
1687         return 0;
1688 }
1689
1690 int mmc_start_init(struct mmc *mmc)
1691 {
1692         bool no_card;
1693         int err;
1694
1695         /* we pretend there's no card when init is NULL */
1696         no_card = mmc_getcd(mmc) == 0;
1697 #if !CONFIG_IS_ENABLED(DM_MMC)
1698         no_card = no_card || (mmc->cfg->ops->init == NULL);
1699 #endif
1700         if (no_card) {
1701                 mmc->has_init = 0;
1702 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
1703                 printf("MMC: no card present\n");
1704 #endif
1705                 return -ENOMEDIUM;
1706         }
1707
1708         if (mmc->has_init)
1709                 return 0;
1710
1711 #ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
1712         mmc_adapter_card_type_ident();
1713 #endif
1714         err = mmc_power_init(mmc);
1715         if (err)
1716                 return err;
1717
1718 #if CONFIG_IS_ENABLED(DM_MMC)
1719         /* The device has already been probed ready for use */
1720 #else
1721         /* made sure it's not NULL earlier */
1722         err = mmc->cfg->ops->init(mmc);
1723         if (err)
1724                 return err;
1725 #endif
1726         mmc->ddr_mode = 0;
1727         mmc_set_bus_width(mmc, 1);
1728         mmc_set_clock(mmc, 1);
1729
1730         /* Reset the Card */
1731         err = mmc_go_idle(mmc);
1732
1733         if (err)
1734                 return err;
1735
1736         /* The internal partition reset to user partition(0) at every CMD0*/
1737         mmc_get_blk_desc(mmc)->hwpart = 0;
1738
1739         /* Test for SD version 2 */
1740         err = mmc_send_if_cond(mmc);
1741
1742         /* Now try to get the SD card's operating condition */
1743         err = sd_send_op_cond(mmc);
1744
1745         /* If the command timed out, we check for an MMC card */
1746         if (err == -ETIMEDOUT) {
1747                 err = mmc_send_op_cond(mmc);
1748
1749                 if (err) {
1750 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
1751                         printf("Card did not respond to voltage select!\n");
1752 #endif
1753                         return -EOPNOTSUPP;
1754                 }
1755         }
1756
1757         if (!err)
1758                 mmc->init_in_progress = 1;
1759
1760         return err;
1761 }
1762
1763 static int mmc_complete_init(struct mmc *mmc)
1764 {
1765         int err = 0;
1766
1767         mmc->init_in_progress = 0;
1768         if (mmc->op_cond_pending)
1769                 err = mmc_complete_op_cond(mmc);
1770
1771         if (!err)
1772                 err = mmc_startup(mmc);
1773         if (err)
1774                 mmc->has_init = 0;
1775         else
1776                 mmc->has_init = 1;
1777         return err;
1778 }
1779
1780 int mmc_init(struct mmc *mmc)
1781 {
1782         int err = 0;
1783         __maybe_unused unsigned start;
1784 #if CONFIG_IS_ENABLED(DM_MMC)
1785         struct mmc_uclass_priv *upriv = dev_get_uclass_priv(mmc->dev);
1786
1787         upriv->mmc = mmc;
1788 #endif
1789         if (mmc->has_init)
1790                 return 0;
1791
1792         start = get_timer(0);
1793
1794         if (!mmc->init_in_progress)
1795                 err = mmc_start_init(mmc);
1796
1797         if (!err)
1798                 err = mmc_complete_init(mmc);
1799         if (err)
1800                 printf("%s: %d, time %lu\n", __func__, err, get_timer(start));
1801
1802         return err;
1803 }
1804
1805 int mmc_set_dsr(struct mmc *mmc, u16 val)
1806 {
1807         mmc->dsr = val;
1808         return 0;
1809 }
1810
1811 /* CPU-specific MMC initializations */
1812 __weak int cpu_mmc_init(bd_t *bis)
1813 {
1814         return -1;
1815 }
1816
1817 /* board-specific MMC initializations. */
1818 __weak int board_mmc_init(bd_t *bis)
1819 {
1820         return -1;
1821 }
1822
1823 void mmc_set_preinit(struct mmc *mmc, int preinit)
1824 {
1825         mmc->preinit = preinit;
1826 }
1827
1828 #if CONFIG_IS_ENABLED(DM_MMC) && defined(CONFIG_SPL_BUILD)
1829 static int mmc_probe(bd_t *bis)
1830 {
1831         return 0;
1832 }
1833 #elif CONFIG_IS_ENABLED(DM_MMC)
1834 static int mmc_probe(bd_t *bis)
1835 {
1836         int ret, i;
1837         struct uclass *uc;
1838         struct udevice *dev;
1839
1840         ret = uclass_get(UCLASS_MMC, &uc);
1841         if (ret)
1842                 return ret;
1843
1844         /*
1845          * Try to add them in sequence order. Really with driver model we
1846          * should allow holes, but the current MMC list does not allow that.
1847          * So if we request 0, 1, 3 we will get 0, 1, 2.
1848          */
1849         for (i = 0; ; i++) {
1850                 ret = uclass_get_device_by_seq(UCLASS_MMC, i, &dev);
1851                 if (ret == -ENODEV)
1852                         break;
1853         }
1854         uclass_foreach_dev(dev, uc) {
1855                 ret = device_probe(dev);
1856                 if (ret)
1857                         printf("%s - probe failed: %d\n", dev->name, ret);
1858         }
1859
1860         return 0;
1861 }
1862 #else
1863 static int mmc_probe(bd_t *bis)
1864 {
1865         if (board_mmc_init(bis) < 0)
1866                 cpu_mmc_init(bis);
1867
1868         return 0;
1869 }
1870 #endif
1871
1872 int mmc_initialize(bd_t *bis)
1873 {
1874         static int initialized = 0;
1875         int ret;
1876         if (initialized)        /* Avoid initializing mmc multiple times */
1877                 return 0;
1878         initialized = 1;
1879
1880 #if !CONFIG_IS_ENABLED(BLK)
1881 #if !CONFIG_IS_ENABLED(MMC_TINY)
1882         mmc_list_init();
1883 #endif
1884 #endif
1885         ret = mmc_probe(bis);
1886         if (ret)
1887                 return ret;
1888
1889 #ifndef CONFIG_SPL_BUILD
1890         print_mmc_devices(',');
1891 #endif
1892
1893         mmc_do_preinit();
1894         return 0;
1895 }
1896
1897 #ifdef CONFIG_CMD_BKOPS_ENABLE
1898 int mmc_set_bkops_enable(struct mmc *mmc)
1899 {
1900         int err;
1901         ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
1902
1903         err = mmc_send_ext_csd(mmc, ext_csd);
1904         if (err) {
1905                 puts("Could not get ext_csd register values\n");
1906                 return err;
1907         }
1908
1909         if (!(ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1)) {
1910                 puts("Background operations not supported on device\n");
1911                 return -EMEDIUMTYPE;
1912         }
1913
1914         if (ext_csd[EXT_CSD_BKOPS_EN] & 0x1) {
1915                 puts("Background operations already enabled\n");
1916                 return 0;
1917         }
1918
1919         err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BKOPS_EN, 1);
1920         if (err) {
1921                 puts("Failed to enable manual background operations\n");
1922                 return err;
1923         }
1924
1925         puts("Enabled manual background operations\n");
1926
1927         return 0;
1928 }
1929 #endif