x86: Update SPL for coreboot
[oweals/u-boot.git] / drivers / misc / cros_ec.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Chromium OS cros_ec driver
4  *
5  * Copyright (c) 2012 The Chromium OS Authors.
6  */
7
8 /*
9  * This is the interface to the Chrome OS EC. It provides keyboard functions,
10  * power control and battery management. Quite a few other functions are
11  * provided to enable the EC software to be updated, talk to the EC's I2C bus
12  * and store a small amount of data in a memory which persists while the EC
13  * is not reset.
14  */
15
16 #define LOG_CATEGORY UCLASS_CROS_EC
17
18 #include <common.h>
19 #include <command.h>
20 #include <dm.h>
21 #include <i2c.h>
22 #include <cros_ec.h>
23 #include <fdtdec.h>
24 #include <malloc.h>
25 #include <spi.h>
26 #include <linux/errno.h>
27 #include <asm/io.h>
28 #include <asm-generic/gpio.h>
29 #include <dm/device-internal.h>
30 #include <dm/of_extra.h>
31 #include <dm/uclass-internal.h>
32
33 #ifdef DEBUG_TRACE
34 #define debug_trace(fmt, b...)  debug(fmt, #b)
35 #else
36 #define debug_trace(fmt, b...)
37 #endif
38
39 enum {
40         /* Timeout waiting for a flash erase command to complete */
41         CROS_EC_CMD_TIMEOUT_MS  = 5000,
42         /* Timeout waiting for a synchronous hash to be recomputed */
43         CROS_EC_CMD_HASH_TIMEOUT_MS = 2000,
44 };
45
46 #define INVALID_HCMD 0xFF
47
48 /*
49  * Map UHEPI masks to non UHEPI commands in order to support old EC FW
50  * which does not support UHEPI command.
51  */
52 static const struct {
53         u8 set_cmd;
54         u8 clear_cmd;
55         u8 get_cmd;
56 } event_map[] = {
57         [EC_HOST_EVENT_MAIN] = {
58                 INVALID_HCMD, EC_CMD_HOST_EVENT_CLEAR,
59                 INVALID_HCMD,
60         },
61         [EC_HOST_EVENT_B] = {
62                 INVALID_HCMD, EC_CMD_HOST_EVENT_CLEAR_B,
63                 EC_CMD_HOST_EVENT_GET_B,
64         },
65         [EC_HOST_EVENT_SCI_MASK] = {
66                 EC_CMD_HOST_EVENT_SET_SCI_MASK, INVALID_HCMD,
67                 EC_CMD_HOST_EVENT_GET_SCI_MASK,
68         },
69         [EC_HOST_EVENT_SMI_MASK] = {
70                 EC_CMD_HOST_EVENT_SET_SMI_MASK, INVALID_HCMD,
71                 EC_CMD_HOST_EVENT_GET_SMI_MASK,
72         },
73         [EC_HOST_EVENT_ALWAYS_REPORT_MASK] = {
74                 INVALID_HCMD, INVALID_HCMD, INVALID_HCMD,
75         },
76         [EC_HOST_EVENT_ACTIVE_WAKE_MASK] = {
77                 EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
78                 EC_CMD_HOST_EVENT_GET_WAKE_MASK,
79         },
80         [EC_HOST_EVENT_LAZY_WAKE_MASK_S0IX] = {
81                 EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
82                 EC_CMD_HOST_EVENT_GET_WAKE_MASK,
83         },
84         [EC_HOST_EVENT_LAZY_WAKE_MASK_S3] = {
85                 EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
86                 EC_CMD_HOST_EVENT_GET_WAKE_MASK,
87         },
88         [EC_HOST_EVENT_LAZY_WAKE_MASK_S5] = {
89                 EC_CMD_HOST_EVENT_SET_WAKE_MASK, INVALID_HCMD,
90                 EC_CMD_HOST_EVENT_GET_WAKE_MASK,
91         },
92 };
93
94 void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len)
95 {
96 #ifdef DEBUG
97         int i;
98
99         printf("%s: ", name);
100         if (cmd != -1)
101                 printf("cmd=%#x: ", cmd);
102         for (i = 0; i < len; i++)
103                 printf("%02x ", data[i]);
104         printf("\n");
105 #endif
106 }
107
108 /*
109  * Calculate a simple 8-bit checksum of a data block
110  *
111  * @param data  Data block to checksum
112  * @param size  Size of data block in bytes
113  * @return checksum value (0 to 255)
114  */
115 int cros_ec_calc_checksum(const uint8_t *data, int size)
116 {
117         int csum, i;
118
119         for (i = csum = 0; i < size; i++)
120                 csum += data[i];
121         return csum & 0xff;
122 }
123
124 /**
125  * Create a request packet for protocol version 3.
126  *
127  * The packet is stored in the device's internal output buffer.
128  *
129  * @param dev           CROS-EC device
130  * @param cmd           Command to send (EC_CMD_...)
131  * @param cmd_version   Version of command to send (EC_VER_...)
132  * @param dout          Output data (may be NULL If dout_len=0)
133  * @param dout_len      Size of output data in bytes
134  * @return packet size in bytes, or <0 if error.
135  */
136 static int create_proto3_request(struct cros_ec_dev *cdev,
137                                  int cmd, int cmd_version,
138                                  const void *dout, int dout_len)
139 {
140         struct ec_host_request *rq = (struct ec_host_request *)cdev->dout;
141         int out_bytes = dout_len + sizeof(*rq);
142
143         /* Fail if output size is too big */
144         if (out_bytes > (int)sizeof(cdev->dout)) {
145                 debug("%s: Cannot send %d bytes\n", __func__, dout_len);
146                 return -EC_RES_REQUEST_TRUNCATED;
147         }
148
149         /* Fill in request packet */
150         rq->struct_version = EC_HOST_REQUEST_VERSION;
151         rq->checksum = 0;
152         rq->command = cmd;
153         rq->command_version = cmd_version;
154         rq->reserved = 0;
155         rq->data_len = dout_len;
156
157         /* Copy data after header */
158         memcpy(rq + 1, dout, dout_len);
159
160         /* Write checksum field so the entire packet sums to 0 */
161         rq->checksum = (uint8_t)(-cros_ec_calc_checksum(cdev->dout, out_bytes));
162
163         cros_ec_dump_data("out", cmd, cdev->dout, out_bytes);
164
165         /* Return size of request packet */
166         return out_bytes;
167 }
168
169 /**
170  * Prepare the device to receive a protocol version 3 response.
171  *
172  * @param dev           CROS-EC device
173  * @param din_len       Maximum size of response in bytes
174  * @return maximum expected number of bytes in response, or <0 if error.
175  */
176 static int prepare_proto3_response_buffer(struct cros_ec_dev *cdev, int din_len)
177 {
178         int in_bytes = din_len + sizeof(struct ec_host_response);
179
180         /* Fail if input size is too big */
181         if (in_bytes > (int)sizeof(cdev->din)) {
182                 debug("%s: Cannot receive %d bytes\n", __func__, din_len);
183                 return -EC_RES_RESPONSE_TOO_BIG;
184         }
185
186         /* Return expected size of response packet */
187         return in_bytes;
188 }
189
190 /**
191  * Handle a protocol version 3 response packet.
192  *
193  * The packet must already be stored in the device's internal input buffer.
194  *
195  * @param dev           CROS-EC device
196  * @param dinp          Returns pointer to response data
197  * @param din_len       Maximum size of response in bytes
198  * @return number of bytes of response data, or <0 if error. Note that error
199  * codes can be from errno.h or -ve EC_RES_INVALID_CHECKSUM values (and they
200  * overlap!)
201  */
202 static int handle_proto3_response(struct cros_ec_dev *dev,
203                                   uint8_t **dinp, int din_len)
204 {
205         struct ec_host_response *rs = (struct ec_host_response *)dev->din;
206         int in_bytes;
207         int csum;
208
209         cros_ec_dump_data("in-header", -1, dev->din, sizeof(*rs));
210
211         /* Check input data */
212         if (rs->struct_version != EC_HOST_RESPONSE_VERSION) {
213                 debug("%s: EC response version mismatch\n", __func__);
214                 return -EC_RES_INVALID_RESPONSE;
215         }
216
217         if (rs->reserved) {
218                 debug("%s: EC response reserved != 0\n", __func__);
219                 return -EC_RES_INVALID_RESPONSE;
220         }
221
222         if (rs->data_len > din_len) {
223                 debug("%s: EC returned too much data\n", __func__);
224                 return -EC_RES_RESPONSE_TOO_BIG;
225         }
226
227         cros_ec_dump_data("in-data", -1, dev->din + sizeof(*rs), rs->data_len);
228
229         /* Update in_bytes to actual data size */
230         in_bytes = sizeof(*rs) + rs->data_len;
231
232         /* Verify checksum */
233         csum = cros_ec_calc_checksum(dev->din, in_bytes);
234         if (csum) {
235                 debug("%s: EC response checksum invalid: 0x%02x\n", __func__,
236                       csum);
237                 return -EC_RES_INVALID_CHECKSUM;
238         }
239
240         /* Return error result, if any */
241         if (rs->result)
242                 return -(int)rs->result;
243
244         /* If we're still here, set response data pointer and return length */
245         *dinp = (uint8_t *)(rs + 1);
246
247         return rs->data_len;
248 }
249
250 static int send_command_proto3(struct cros_ec_dev *cdev,
251                                int cmd, int cmd_version,
252                                const void *dout, int dout_len,
253                                uint8_t **dinp, int din_len)
254 {
255         struct dm_cros_ec_ops *ops;
256         int out_bytes, in_bytes;
257         int rv;
258
259         /* Create request packet */
260         out_bytes = create_proto3_request(cdev, cmd, cmd_version,
261                                           dout, dout_len);
262         if (out_bytes < 0)
263                 return out_bytes;
264
265         /* Prepare response buffer */
266         in_bytes = prepare_proto3_response_buffer(cdev, din_len);
267         if (in_bytes < 0)
268                 return in_bytes;
269
270         ops = dm_cros_ec_get_ops(cdev->dev);
271         rv = ops->packet ? ops->packet(cdev->dev, out_bytes, in_bytes) :
272                         -ENOSYS;
273         if (rv < 0)
274                 return rv;
275
276         /* Process the response */
277         return handle_proto3_response(cdev, dinp, din_len);
278 }
279
280 static int send_command(struct cros_ec_dev *dev, uint cmd, int cmd_version,
281                         const void *dout, int dout_len,
282                         uint8_t **dinp, int din_len)
283 {
284         struct dm_cros_ec_ops *ops;
285         int ret = -1;
286
287         /* Handle protocol version 3 support */
288         if (dev->protocol_version == 3) {
289                 return send_command_proto3(dev, cmd, cmd_version,
290                                            dout, dout_len, dinp, din_len);
291         }
292
293         ops = dm_cros_ec_get_ops(dev->dev);
294         ret = ops->command(dev->dev, cmd, cmd_version,
295                            (const uint8_t *)dout, dout_len, dinp, din_len);
296
297         return ret;
298 }
299
300 /**
301  * Send a command to the CROS-EC device and return the reply.
302  *
303  * The device's internal input/output buffers are used.
304  *
305  * @param dev           CROS-EC device
306  * @param cmd           Command to send (EC_CMD_...)
307  * @param cmd_version   Version of command to send (EC_VER_...)
308  * @param dout          Output data (may be NULL If dout_len=0)
309  * @param dout_len      Size of output data in bytes
310  * @param dinp          Response data (may be NULL If din_len=0).
311  *                      If not NULL, it will be updated to point to the data
312  *                      and will always be double word aligned (64-bits)
313  * @param din_len       Maximum size of response in bytes
314  * @return number of bytes in response, or -ve on error
315  */
316 static int ec_command_inptr(struct udevice *dev, uint cmd,
317                             int cmd_version, const void *dout, int dout_len,
318                             uint8_t **dinp, int din_len)
319 {
320         struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
321         uint8_t *din = NULL;
322         int len;
323
324         len = send_command(cdev, cmd, cmd_version, dout, dout_len, &din,
325                            din_len);
326
327         /* If the command doesn't complete, wait a while */
328         if (len == -EC_RES_IN_PROGRESS) {
329                 struct ec_response_get_comms_status *resp = NULL;
330                 ulong start;
331
332                 /* Wait for command to complete */
333                 start = get_timer(0);
334                 do {
335                         int ret;
336
337                         mdelay(50);     /* Insert some reasonable delay */
338                         ret = send_command(cdev, EC_CMD_GET_COMMS_STATUS, 0,
339                                            NULL, 0,
340                                            (uint8_t **)&resp, sizeof(*resp));
341                         if (ret < 0)
342                                 return ret;
343
344                         if (get_timer(start) > CROS_EC_CMD_TIMEOUT_MS) {
345                                 debug("%s: Command %#02x timeout\n",
346                                       __func__, cmd);
347                                 return -EC_RES_TIMEOUT;
348                         }
349                 } while (resp->flags & EC_COMMS_STATUS_PROCESSING);
350
351                 /* OK it completed, so read the status response */
352                 /* not sure why it was 0 for the last argument */
353                 len = send_command(cdev, EC_CMD_RESEND_RESPONSE, 0, NULL, 0,
354                                    &din, din_len);
355         }
356
357         debug("%s: len=%d, din=%p\n", __func__, len, din);
358         if (dinp) {
359                 /* If we have any data to return, it must be 64bit-aligned */
360                 assert(len <= 0 || !((uintptr_t)din & 7));
361                 *dinp = din;
362         }
363
364         return len;
365 }
366
367 /**
368  * Send a command to the CROS-EC device and return the reply.
369  *
370  * The device's internal input/output buffers are used.
371  *
372  * @param dev           CROS-EC device
373  * @param cmd           Command to send (EC_CMD_...)
374  * @param cmd_version   Version of command to send (EC_VER_...)
375  * @param dout          Output data (may be NULL If dout_len=0)
376  * @param dout_len      Size of output data in bytes
377  * @param din           Response data (may be NULL If din_len=0).
378  *                      It not NULL, it is a place for ec_command() to copy the
379  *      data to.
380  * @param din_len       Maximum size of response in bytes
381  * @return number of bytes in response, or -ve on error
382  */
383 static int ec_command(struct udevice *dev, uint cmd, int cmd_version,
384                       const void *dout, int dout_len,
385                       void *din, int din_len)
386 {
387         uint8_t *in_buffer;
388         int len;
389
390         assert((din_len == 0) || din);
391         len = ec_command_inptr(dev, cmd, cmd_version, dout, dout_len,
392                                &in_buffer, din_len);
393         if (len > 0) {
394                 /*
395                  * If we were asked to put it somewhere, do so, otherwise just
396                  * disregard the result.
397                  */
398                 if (din && in_buffer) {
399                         assert(len <= din_len);
400                         memmove(din, in_buffer, len);
401                 }
402         }
403         return len;
404 }
405
406 int cros_ec_scan_keyboard(struct udevice *dev, struct mbkp_keyscan *scan)
407 {
408         if (ec_command(dev, EC_CMD_MKBP_STATE, 0, NULL, 0, scan,
409                        sizeof(scan->data)) != sizeof(scan->data))
410                 return -1;
411
412         return 0;
413 }
414
415 int cros_ec_read_id(struct udevice *dev, char *id, int maxlen)
416 {
417         struct ec_response_get_version *r;
418         int ret;
419
420         ret = ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
421                                (uint8_t **)&r, sizeof(*r));
422         if (ret != sizeof(*r)) {
423                 log_err("Got rc %d, expected %u\n", ret, (uint)sizeof(*r));
424                 return -1;
425         }
426
427         if (maxlen > (int)sizeof(r->version_string_ro))
428                 maxlen = sizeof(r->version_string_ro);
429
430         switch (r->current_image) {
431         case EC_IMAGE_RO:
432                 memcpy(id, r->version_string_ro, maxlen);
433                 break;
434         case EC_IMAGE_RW:
435                 memcpy(id, r->version_string_rw, maxlen);
436                 break;
437         default:
438                 log_err("Invalid EC image %d\n", r->current_image);
439                 return -1;
440         }
441
442         id[maxlen - 1] = '\0';
443         return 0;
444 }
445
446 int cros_ec_read_version(struct udevice *dev,
447                          struct ec_response_get_version **versionp)
448 {
449         if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
450                         (uint8_t **)versionp, sizeof(**versionp))
451                         != sizeof(**versionp))
452                 return -1;
453
454         return 0;
455 }
456
457 int cros_ec_read_build_info(struct udevice *dev, char **strp)
458 {
459         if (ec_command_inptr(dev, EC_CMD_GET_BUILD_INFO, 0, NULL, 0,
460                         (uint8_t **)strp, EC_PROTO2_MAX_PARAM_SIZE) < 0)
461                 return -1;
462
463         return 0;
464 }
465
466 int cros_ec_read_current_image(struct udevice *dev,
467                                enum ec_current_image *image)
468 {
469         struct ec_response_get_version *r;
470
471         if (ec_command_inptr(dev, EC_CMD_GET_VERSION, 0, NULL, 0,
472                         (uint8_t **)&r, sizeof(*r)) != sizeof(*r))
473                 return -1;
474
475         *image = r->current_image;
476         return 0;
477 }
478
479 static int cros_ec_wait_on_hash_done(struct udevice *dev,
480                                      struct ec_response_vboot_hash *hash)
481 {
482         struct ec_params_vboot_hash p;
483         ulong start;
484
485         start = get_timer(0);
486         while (hash->status == EC_VBOOT_HASH_STATUS_BUSY) {
487                 mdelay(50);     /* Insert some reasonable delay */
488
489                 p.cmd = EC_VBOOT_HASH_GET;
490                 if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
491                        hash, sizeof(*hash)) < 0)
492                         return -1;
493
494                 if (get_timer(start) > CROS_EC_CMD_HASH_TIMEOUT_MS) {
495                         debug("%s: EC_VBOOT_HASH_GET timeout\n", __func__);
496                         return -EC_RES_TIMEOUT;
497                 }
498         }
499         return 0;
500 }
501
502 int cros_ec_read_hash(struct udevice *dev, uint hash_offset,
503                       struct ec_response_vboot_hash *hash)
504 {
505         struct ec_params_vboot_hash p;
506         int rv;
507
508         p.cmd = EC_VBOOT_HASH_GET;
509         p.offset = hash_offset;
510         if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
511                        hash, sizeof(*hash)) < 0)
512                 return -1;
513
514         /* If the EC is busy calculating the hash, fidget until it's done. */
515         rv = cros_ec_wait_on_hash_done(dev, hash);
516         if (rv)
517                 return rv;
518
519         /* If the hash is valid, we're done. Otherwise, we have to kick it off
520          * again and wait for it to complete. Note that we explicitly assume
521          * that hashing zero bytes is always wrong, even though that would
522          * produce a valid hash value. */
523         if (hash->status == EC_VBOOT_HASH_STATUS_DONE && hash->size)
524                 return 0;
525
526         debug("%s: No valid hash (status=%d size=%d). Compute one...\n",
527               __func__, hash->status, hash->size);
528
529         p.cmd = EC_VBOOT_HASH_START;
530         p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
531         p.nonce_size = 0;
532         p.offset = hash_offset;
533
534         if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
535                        hash, sizeof(*hash)) < 0)
536                 return -1;
537
538         rv = cros_ec_wait_on_hash_done(dev, hash);
539         if (rv)
540                 return rv;
541
542         debug("%s: hash done\n", __func__);
543
544         return 0;
545 }
546
547 static int cros_ec_invalidate_hash(struct udevice *dev)
548 {
549         struct ec_params_vboot_hash p;
550         struct ec_response_vboot_hash *hash;
551
552         /* We don't have an explict command for the EC to discard its current
553          * hash value, so we'll just tell it to calculate one that we know is
554          * wrong (we claim that hashing zero bytes is always invalid).
555          */
556         p.cmd = EC_VBOOT_HASH_RECALC;
557         p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
558         p.nonce_size = 0;
559         p.offset = 0;
560         p.size = 0;
561
562         debug("%s:\n", __func__);
563
564         if (ec_command_inptr(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
565                        (uint8_t **)&hash, sizeof(*hash)) < 0)
566                 return -1;
567
568         /* No need to wait for it to finish */
569         return 0;
570 }
571
572 int cros_ec_reboot(struct udevice *dev, enum ec_reboot_cmd cmd, uint8_t flags)
573 {
574         struct ec_params_reboot_ec p;
575
576         p.cmd = cmd;
577         p.flags = flags;
578
579         if (ec_command_inptr(dev, EC_CMD_REBOOT_EC, 0, &p, sizeof(p), NULL, 0)
580                         < 0)
581                 return -1;
582
583         if (!(flags & EC_REBOOT_FLAG_ON_AP_SHUTDOWN)) {
584                 /*
585                  * EC reboot will take place immediately so delay to allow it
586                  * to complete.  Note that some reboot types (EC_REBOOT_COLD)
587                  * will reboot the AP as well, in which case we won't actually
588                  * get to this point.
589                  */
590                 /*
591                  * TODO(rspangler@chromium.org): Would be nice if we had a
592                  * better way to determine when the reboot is complete.  Could
593                  * we poll a memory-mapped LPC value?
594                  */
595                 udelay(50000);
596         }
597
598         return 0;
599 }
600
601 int cros_ec_interrupt_pending(struct udevice *dev)
602 {
603         struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
604
605         /* no interrupt support : always poll */
606         if (!dm_gpio_is_valid(&cdev->ec_int))
607                 return -ENOENT;
608
609         return dm_gpio_get_value(&cdev->ec_int);
610 }
611
612 int cros_ec_info(struct udevice *dev, struct ec_response_mkbp_info *info)
613 {
614         if (ec_command(dev, EC_CMD_MKBP_INFO, 0, NULL, 0, info,
615                        sizeof(*info)) != sizeof(*info))
616                 return -1;
617
618         return 0;
619 }
620
621 int cros_ec_get_event_mask(struct udevice *dev, uint type, uint32_t *mask)
622 {
623         struct ec_response_host_event_mask rsp;
624         int ret;
625
626         ret = ec_command(dev, type, 0, NULL, 0, &rsp, sizeof(rsp));
627         if (ret < 0)
628                 return ret;
629         else if (ret != sizeof(rsp))
630                 return -EINVAL;
631
632         *mask = rsp.mask;
633
634         return 0;
635 }
636
637 int cros_ec_set_event_mask(struct udevice *dev, uint type, uint32_t mask)
638 {
639         struct ec_params_host_event_mask req;
640         int ret;
641
642         req.mask = mask;
643
644         ret = ec_command(dev, type, 0, &req, sizeof(req), NULL, 0);
645         if (ret < 0)
646                 return ret;
647
648         return 0;
649 }
650
651 int cros_ec_get_host_events(struct udevice *dev, uint32_t *events_ptr)
652 {
653         struct ec_response_host_event_mask *resp;
654
655         /*
656          * Use the B copy of the event flags, because the main copy is already
657          * used by ACPI/SMI.
658          */
659         if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_GET_B, 0, NULL, 0,
660                        (uint8_t **)&resp, sizeof(*resp)) < (int)sizeof(*resp))
661                 return -1;
662
663         if (resp->mask & EC_HOST_EVENT_MASK(EC_HOST_EVENT_INVALID))
664                 return -1;
665
666         *events_ptr = resp->mask;
667         return 0;
668 }
669
670 int cros_ec_clear_host_events(struct udevice *dev, uint32_t events)
671 {
672         struct ec_params_host_event_mask params;
673
674         params.mask = events;
675
676         /*
677          * Use the B copy of the event flags, so it affects the data returned
678          * by cros_ec_get_host_events().
679          */
680         if (ec_command_inptr(dev, EC_CMD_HOST_EVENT_CLEAR_B, 0,
681                        &params, sizeof(params), NULL, 0) < 0)
682                 return -1;
683
684         return 0;
685 }
686
687 int cros_ec_flash_protect(struct udevice *dev, uint32_t set_mask,
688                           uint32_t set_flags,
689                           struct ec_response_flash_protect *resp)
690 {
691         struct ec_params_flash_protect params;
692
693         params.mask = set_mask;
694         params.flags = set_flags;
695
696         if (ec_command(dev, EC_CMD_FLASH_PROTECT, EC_VER_FLASH_PROTECT,
697                        &params, sizeof(params),
698                        resp, sizeof(*resp)) != sizeof(*resp))
699                 return -1;
700
701         return 0;
702 }
703
704 int cros_ec_entering_mode(struct udevice *dev, int mode)
705 {
706         int rc;
707
708         rc = ec_command(dev, EC_CMD_ENTERING_MODE, 0, &mode, sizeof(mode),
709                         NULL, 0);
710         if (rc)
711                 return -1;
712         return 0;
713 }
714
715 static int cros_ec_check_version(struct udevice *dev)
716 {
717         struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
718         struct ec_params_hello req;
719         struct ec_response_hello *resp;
720
721         struct dm_cros_ec_ops *ops;
722         int ret;
723
724         ops = dm_cros_ec_get_ops(dev);
725         if (ops->check_version) {
726                 ret = ops->check_version(dev);
727                 if (ret)
728                         return ret;
729         }
730
731         /*
732          * TODO(sjg@chromium.org).
733          * There is a strange oddity here with the EC. We could just ignore
734          * the response, i.e. pass the last two parameters as NULL and 0.
735          * In this case we won't read back very many bytes from the EC.
736          * On the I2C bus the EC gets upset about this and will try to send
737          * the bytes anyway. This means that we will have to wait for that
738          * to complete before continuing with a new EC command.
739          *
740          * This problem is probably unique to the I2C bus.
741          *
742          * So for now, just read all the data anyway.
743          */
744
745         /* Try sending a version 3 packet */
746         cdev->protocol_version = 3;
747         req.in_data = 0;
748         if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
749                              (uint8_t **)&resp, sizeof(*resp)) > 0)
750                 return 0;
751
752         /* Try sending a version 2 packet */
753         cdev->protocol_version = 2;
754         if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
755                              (uint8_t **)&resp, sizeof(*resp)) > 0)
756                 return 0;
757
758         /*
759          * Fail if we're still here, since the EC doesn't understand any
760          * protcol version we speak.  Version 1 interface without command
761          * version is no longer supported, and we don't know about any new
762          * protocol versions.
763          */
764         cdev->protocol_version = 0;
765         printf("%s: ERROR: old EC interface not supported\n", __func__);
766         return -1;
767 }
768
769 int cros_ec_test(struct udevice *dev)
770 {
771         struct ec_params_hello req;
772         struct ec_response_hello *resp;
773
774         req.in_data = 0x12345678;
775         if (ec_command_inptr(dev, EC_CMD_HELLO, 0, &req, sizeof(req),
776                        (uint8_t **)&resp, sizeof(*resp)) < sizeof(*resp)) {
777                 printf("ec_command_inptr() returned error\n");
778                 return -1;
779         }
780         if (resp->out_data != req.in_data + 0x01020304) {
781                 printf("Received invalid handshake %x\n", resp->out_data);
782                 return -1;
783         }
784
785         return 0;
786 }
787
788 int cros_ec_flash_offset(struct udevice *dev, enum ec_flash_region region,
789                       uint32_t *offset, uint32_t *size)
790 {
791         struct ec_params_flash_region_info p;
792         struct ec_response_flash_region_info *r;
793         int ret;
794
795         p.region = region;
796         ret = ec_command_inptr(dev, EC_CMD_FLASH_REGION_INFO,
797                          EC_VER_FLASH_REGION_INFO,
798                          &p, sizeof(p), (uint8_t **)&r, sizeof(*r));
799         if (ret != sizeof(*r))
800                 return -1;
801
802         if (offset)
803                 *offset = r->offset;
804         if (size)
805                 *size = r->size;
806
807         return 0;
808 }
809
810 int cros_ec_flash_erase(struct udevice *dev, uint32_t offset, uint32_t size)
811 {
812         struct ec_params_flash_erase p;
813
814         p.offset = offset;
815         p.size = size;
816         return ec_command_inptr(dev, EC_CMD_FLASH_ERASE, 0, &p, sizeof(p),
817                         NULL, 0);
818 }
819
820 /**
821  * Write a single block to the flash
822  *
823  * Write a block of data to the EC flash. The size must not exceed the flash
824  * write block size which you can obtain from cros_ec_flash_write_burst_size().
825  *
826  * The offset starts at 0. You can obtain the region information from
827  * cros_ec_flash_offset() to find out where to write for a particular region.
828  *
829  * Attempting to write to the region where the EC is currently running from
830  * will result in an error.
831  *
832  * @param dev           CROS-EC device
833  * @param data          Pointer to data buffer to write
834  * @param offset        Offset within flash to write to.
835  * @param size          Number of bytes to write
836  * @return 0 if ok, -1 on error
837  */
838 static int cros_ec_flash_write_block(struct udevice *dev, const uint8_t *data,
839                                      uint32_t offset, uint32_t size)
840 {
841         struct ec_params_flash_write *p;
842         int ret;
843
844         p = malloc(sizeof(*p) + size);
845         if (!p)
846                 return -ENOMEM;
847
848         p->offset = offset;
849         p->size = size;
850         assert(data && p->size <= EC_FLASH_WRITE_VER0_SIZE);
851         memcpy(p + 1, data, p->size);
852
853         ret = ec_command_inptr(dev, EC_CMD_FLASH_WRITE, 0,
854                           p, sizeof(*p) + size, NULL, 0) >= 0 ? 0 : -1;
855
856         free(p);
857
858         return ret;
859 }
860
861 /**
862  * Return optimal flash write burst size
863  */
864 static int cros_ec_flash_write_burst_size(struct udevice *dev)
865 {
866         return EC_FLASH_WRITE_VER0_SIZE;
867 }
868
869 /**
870  * Check if a block of data is erased (all 0xff)
871  *
872  * This function is useful when dealing with flash, for checking whether a
873  * data block is erased and thus does not need to be programmed.
874  *
875  * @param data          Pointer to data to check (must be word-aligned)
876  * @param size          Number of bytes to check (must be word-aligned)
877  * @return 0 if erased, non-zero if any word is not erased
878  */
879 static int cros_ec_data_is_erased(const uint32_t *data, int size)
880 {
881         assert(!(size & 3));
882         size /= sizeof(uint32_t);
883         for (; size > 0; size -= 4, data++)
884                 if (*data != -1U)
885                         return 0;
886
887         return 1;
888 }
889
890 /**
891  * Read back flash parameters
892  *
893  * This function reads back parameters of the flash as reported by the EC
894  *
895  * @param dev  Pointer to device
896  * @param info Pointer to output flash info struct
897  */
898 int cros_ec_read_flashinfo(struct udevice *dev,
899                            struct ec_response_flash_info *info)
900 {
901         int ret;
902
903         ret = ec_command(dev, EC_CMD_FLASH_INFO, 0,
904                          NULL, 0, info, sizeof(*info));
905         if (ret < 0)
906                 return ret;
907
908         return ret < sizeof(*info) ? -1 : 0;
909 }
910
911 int cros_ec_flash_write(struct udevice *dev, const uint8_t *data,
912                         uint32_t offset, uint32_t size)
913 {
914         struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
915         uint32_t burst = cros_ec_flash_write_burst_size(dev);
916         uint32_t end, off;
917         int ret;
918
919         if (!burst)
920                 return -EINVAL;
921
922         /*
923          * TODO: round up to the nearest multiple of write size.  Can get away
924          * without that on link right now because its write size is 4 bytes.
925          */
926         end = offset + size;
927         for (off = offset; off < end; off += burst, data += burst) {
928                 uint32_t todo;
929
930                 /* If the data is empty, there is no point in programming it */
931                 todo = min(end - off, burst);
932                 if (cdev->optimise_flash_write &&
933                     cros_ec_data_is_erased((uint32_t *)data, todo))
934                         continue;
935
936                 ret = cros_ec_flash_write_block(dev, data, off, todo);
937                 if (ret)
938                         return ret;
939         }
940
941         return 0;
942 }
943
944 /**
945  * Run verification on a slot
946  *
947  * @param me     CrosEc instance
948  * @param region Region to run verification on
949  * @return 0 if success or not applicable. Non-zero if verification failed.
950  */
951 int cros_ec_efs_verify(struct udevice *dev, enum ec_flash_region region)
952 {
953         struct ec_params_efs_verify p;
954         int rv;
955
956         log_info("EFS: EC is verifying updated image...\n");
957         p.region = region;
958
959         rv = ec_command(dev, EC_CMD_EFS_VERIFY, 0, &p, sizeof(p), NULL, 0);
960         if (rv >= 0) {
961                 log_info("EFS: Verification success\n");
962                 return 0;
963         }
964         if (rv == -EC_RES_INVALID_COMMAND) {
965                 log_info("EFS: EC doesn't support EFS_VERIFY command\n");
966                 return 0;
967         }
968         log_info("EFS: Verification failed\n");
969
970         return rv;
971 }
972
973 /**
974  * Read a single block from the flash
975  *
976  * Read a block of data from the EC flash. The size must not exceed the flash
977  * write block size which you can obtain from cros_ec_flash_write_burst_size().
978  *
979  * The offset starts at 0. You can obtain the region information from
980  * cros_ec_flash_offset() to find out where to read for a particular region.
981  *
982  * @param dev           CROS-EC device
983  * @param data          Pointer to data buffer to read into
984  * @param offset        Offset within flash to read from
985  * @param size          Number of bytes to read
986  * @return 0 if ok, -1 on error
987  */
988 static int cros_ec_flash_read_block(struct udevice *dev, uint8_t *data,
989                                     uint32_t offset, uint32_t size)
990 {
991         struct ec_params_flash_read p;
992
993         p.offset = offset;
994         p.size = size;
995
996         return ec_command(dev, EC_CMD_FLASH_READ, 0,
997                           &p, sizeof(p), data, size) >= 0 ? 0 : -1;
998 }
999
1000 int cros_ec_flash_read(struct udevice *dev, uint8_t *data, uint32_t offset,
1001                        uint32_t size)
1002 {
1003         uint32_t burst = cros_ec_flash_write_burst_size(dev);
1004         uint32_t end, off;
1005         int ret;
1006
1007         end = offset + size;
1008         for (off = offset; off < end; off += burst, data += burst) {
1009                 ret = cros_ec_flash_read_block(dev, data, off,
1010                                             min(end - off, burst));
1011                 if (ret)
1012                         return ret;
1013         }
1014
1015         return 0;
1016 }
1017
1018 int cros_ec_flash_update_rw(struct udevice *dev, const uint8_t *image,
1019                             int image_size)
1020 {
1021         uint32_t rw_offset, rw_size;
1022         int ret;
1023
1024         if (cros_ec_flash_offset(dev, EC_FLASH_REGION_ACTIVE, &rw_offset,
1025                 &rw_size))
1026                 return -1;
1027         if (image_size > (int)rw_size)
1028                 return -1;
1029
1030         /* Invalidate the existing hash, just in case the AP reboots
1031          * unexpectedly during the update. If that happened, the EC RW firmware
1032          * would be invalid, but the EC would still have the original hash.
1033          */
1034         ret = cros_ec_invalidate_hash(dev);
1035         if (ret)
1036                 return ret;
1037
1038         /*
1039          * Erase the entire RW section, so that the EC doesn't see any garbage
1040          * past the new image if it's smaller than the current image.
1041          *
1042          * TODO: could optimize this to erase just the current image, since
1043          * presumably everything past that is 0xff's.  But would still need to
1044          * round up to the nearest multiple of erase size.
1045          */
1046         ret = cros_ec_flash_erase(dev, rw_offset, rw_size);
1047         if (ret)
1048                 return ret;
1049
1050         /* Write the image */
1051         ret = cros_ec_flash_write(dev, image, rw_offset, image_size);
1052         if (ret)
1053                 return ret;
1054
1055         return 0;
1056 }
1057
1058 int cros_ec_read_nvdata(struct udevice *dev, uint8_t *block, int size)
1059 {
1060         struct ec_params_vbnvcontext p;
1061         int len;
1062
1063         if (size != EC_VBNV_BLOCK_SIZE && size != EC_VBNV_BLOCK_SIZE_V2)
1064                 return -EINVAL;
1065
1066         p.op = EC_VBNV_CONTEXT_OP_READ;
1067
1068         len = ec_command(dev, EC_CMD_VBNV_CONTEXT, EC_VER_VBNV_CONTEXT,
1069                          &p, sizeof(uint32_t) + size, block, size);
1070         if (len != size) {
1071                 log_err("Expected %d bytes, got %d\n", size, len);
1072                 return -EIO;
1073         }
1074
1075         return 0;
1076 }
1077
1078 int cros_ec_write_nvdata(struct udevice *dev, const uint8_t *block, int size)
1079 {
1080         struct ec_params_vbnvcontext p;
1081         int len;
1082
1083         if (size != EC_VBNV_BLOCK_SIZE && size != EC_VBNV_BLOCK_SIZE_V2)
1084                 return -EINVAL;
1085         p.op = EC_VBNV_CONTEXT_OP_WRITE;
1086         memcpy(p.block, block, size);
1087
1088         len = ec_command_inptr(dev, EC_CMD_VBNV_CONTEXT, EC_VER_VBNV_CONTEXT,
1089                         &p, sizeof(uint32_t) + size, NULL, 0);
1090         if (len < 0)
1091                 return -1;
1092
1093         return 0;
1094 }
1095
1096 int cros_ec_battery_cutoff(struct udevice *dev, uint8_t flags)
1097 {
1098         struct ec_params_battery_cutoff p;
1099         int len;
1100
1101         p.flags = flags;
1102         len = ec_command(dev, EC_CMD_BATTERY_CUT_OFF, 1, &p, sizeof(p),
1103                          NULL, 0);
1104
1105         if (len < 0)
1106                 return -1;
1107         return 0;
1108 }
1109
1110 int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state)
1111 {
1112         struct ec_params_ldo_set params;
1113
1114         params.index = index;
1115         params.state = state;
1116
1117         if (ec_command_inptr(dev, EC_CMD_LDO_SET, 0, &params, sizeof(params),
1118                              NULL, 0))
1119                 return -1;
1120
1121         return 0;
1122 }
1123
1124 int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state)
1125 {
1126         struct ec_params_ldo_get params;
1127         struct ec_response_ldo_get *resp;
1128
1129         params.index = index;
1130
1131         if (ec_command_inptr(dev, EC_CMD_LDO_GET, 0, &params, sizeof(params),
1132                              (uint8_t **)&resp, sizeof(*resp)) !=
1133                              sizeof(*resp))
1134                 return -1;
1135
1136         *state = resp->state;
1137
1138         return 0;
1139 }
1140
1141 int cros_ec_register(struct udevice *dev)
1142 {
1143         struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
1144         char id[MSG_BYTES];
1145
1146         cdev->dev = dev;
1147         gpio_request_by_name(dev, "ec-interrupt", 0, &cdev->ec_int,
1148                              GPIOD_IS_IN);
1149         cdev->optimise_flash_write = dev_read_bool(dev, "optimise-flash-write");
1150
1151         if (cros_ec_check_version(dev)) {
1152                 debug("%s: Could not detect CROS-EC version\n", __func__);
1153                 return -CROS_EC_ERR_CHECK_VERSION;
1154         }
1155
1156         if (cros_ec_read_id(dev, id, sizeof(id))) {
1157                 debug("%s: Could not read KBC ID\n", __func__);
1158                 return -CROS_EC_ERR_READ_ID;
1159         }
1160
1161         /* Remember this device for use by the cros_ec command */
1162         debug("Google Chrome EC v%d CROS-EC driver ready, id '%s'\n",
1163               cdev->protocol_version, id);
1164
1165         return 0;
1166 }
1167
1168 int cros_ec_decode_ec_flash(struct udevice *dev, struct fdt_cros_ec *config)
1169 {
1170         ofnode flash_node, node;
1171
1172         flash_node = dev_read_subnode(dev, "flash");
1173         if (!ofnode_valid(flash_node)) {
1174                 debug("Failed to find flash node\n");
1175                 return -1;
1176         }
1177
1178         if (ofnode_read_fmap_entry(flash_node,  &config->flash)) {
1179                 debug("Failed to decode flash node in chrome-ec\n");
1180                 return -1;
1181         }
1182
1183         config->flash_erase_value = ofnode_read_s32_default(flash_node,
1184                                                             "erase-value", -1);
1185         ofnode_for_each_subnode(node, flash_node) {
1186                 const char *name = ofnode_get_name(node);
1187                 enum ec_flash_region region;
1188
1189                 if (0 == strcmp(name, "ro")) {
1190                         region = EC_FLASH_REGION_RO;
1191                 } else if (0 == strcmp(name, "rw")) {
1192                         region = EC_FLASH_REGION_ACTIVE;
1193                 } else if (0 == strcmp(name, "wp-ro")) {
1194                         region = EC_FLASH_REGION_WP_RO;
1195                 } else {
1196                         debug("Unknown EC flash region name '%s'\n", name);
1197                         return -1;
1198                 }
1199
1200                 if (ofnode_read_fmap_entry(node, &config->region[region])) {
1201                         debug("Failed to decode flash region in chrome-ec'\n");
1202                         return -1;
1203                 }
1204         }
1205
1206         return 0;
1207 }
1208
1209 int cros_ec_i2c_tunnel(struct udevice *dev, int port, struct i2c_msg *in,
1210                        int nmsgs)
1211 {
1212         union {
1213                 struct ec_params_i2c_passthru p;
1214                 uint8_t outbuf[EC_PROTO2_MAX_PARAM_SIZE];
1215         } params;
1216         union {
1217                 struct ec_response_i2c_passthru r;
1218                 uint8_t inbuf[EC_PROTO2_MAX_PARAM_SIZE];
1219         } response;
1220         struct ec_params_i2c_passthru *p = &params.p;
1221         struct ec_response_i2c_passthru *r = &response.r;
1222         struct ec_params_i2c_passthru_msg *msg;
1223         uint8_t *pdata, *read_ptr = NULL;
1224         int read_len;
1225         int size;
1226         int rv;
1227         int i;
1228
1229         p->port = port;
1230
1231         p->num_msgs = nmsgs;
1232         size = sizeof(*p) + p->num_msgs * sizeof(*msg);
1233
1234         /* Create a message to write the register address and optional data */
1235         pdata = (uint8_t *)p + size;
1236
1237         read_len = 0;
1238         for (i = 0, msg = p->msg; i < nmsgs; i++, msg++, in++) {
1239                 bool is_read = in->flags & I2C_M_RD;
1240
1241                 msg->addr_flags = in->addr;
1242                 msg->len = in->len;
1243                 if (is_read) {
1244                         msg->addr_flags |= EC_I2C_FLAG_READ;
1245                         read_len += in->len;
1246                         read_ptr = in->buf;
1247                         if (sizeof(*r) + read_len > sizeof(response)) {
1248                                 puts("Read length too big for buffer\n");
1249                                 return -1;
1250                         }
1251                 } else {
1252                         if (pdata - (uint8_t *)p + in->len > sizeof(params)) {
1253                                 puts("Params too large for buffer\n");
1254                                 return -1;
1255                         }
1256                         memcpy(pdata, in->buf, in->len);
1257                         pdata += in->len;
1258                 }
1259         }
1260
1261         rv = ec_command(dev, EC_CMD_I2C_PASSTHRU, 0, p, pdata - (uint8_t *)p,
1262                         r, sizeof(*r) + read_len);
1263         if (rv < 0)
1264                 return rv;
1265
1266         /* Parse response */
1267         if (r->i2c_status & EC_I2C_STATUS_ERROR) {
1268                 printf("Transfer failed with status=0x%x\n", r->i2c_status);
1269                 return -1;
1270         }
1271
1272         if (rv < sizeof(*r) + read_len) {
1273                 puts("Truncated read response\n");
1274                 return -1;
1275         }
1276
1277         /* We only support a single read message for each transfer */
1278         if (read_len)
1279                 memcpy(read_ptr, r->data, read_len);
1280
1281         return 0;
1282 }
1283
1284 int cros_ec_check_feature(struct udevice *dev, int feature)
1285 {
1286         struct ec_response_get_features r;
1287         int rv;
1288
1289         rv = ec_command(dev, EC_CMD_GET_FEATURES, 0, &r, sizeof(r), NULL, 0);
1290         if (rv)
1291                 return rv;
1292
1293         if (feature >= 8 * sizeof(r.flags))
1294                 return -1;
1295
1296         return r.flags[feature / 32] & EC_FEATURE_MASK_0(feature);
1297 }
1298
1299 /*
1300  * Query the EC for specified mask indicating enabled events.
1301  * The EC maintains separate event masks for SMI, SCI and WAKE.
1302  */
1303 static int cros_ec_uhepi_cmd(struct udevice *dev, uint mask, uint action,
1304                              uint64_t *value)
1305 {
1306         int ret;
1307         struct ec_params_host_event req;
1308         struct ec_response_host_event rsp;
1309
1310         req.action = action;
1311         req.mask_type = mask;
1312         if (action != EC_HOST_EVENT_GET)
1313                 req.value = *value;
1314         else
1315                 *value = 0;
1316         ret = ec_command(dev, EC_CMD_HOST_EVENT, 0, &req, sizeof(req), &rsp,
1317                          sizeof(rsp));
1318
1319         if (action != EC_HOST_EVENT_GET)
1320                 return ret;
1321         if (ret == 0)
1322                 *value = rsp.value;
1323
1324         return ret;
1325 }
1326
1327 static int cros_ec_handle_non_uhepi_cmd(struct udevice *dev, uint hcmd,
1328                                         uint action, uint64_t *value)
1329 {
1330         int ret = -1;
1331         struct ec_params_host_event_mask req;
1332         struct ec_response_host_event_mask rsp;
1333
1334         if (hcmd == INVALID_HCMD)
1335                 return ret;
1336
1337         if (action != EC_HOST_EVENT_GET)
1338                 req.mask = (uint32_t)*value;
1339         else
1340                 *value = 0;
1341
1342         ret = ec_command(dev, hcmd, 0, &req, sizeof(req), &rsp, sizeof(rsp));
1343         if (action != EC_HOST_EVENT_GET)
1344                 return ret;
1345         if (ret == 0)
1346                 *value = rsp.mask;
1347
1348         return ret;
1349 }
1350
1351 bool cros_ec_is_uhepi_supported(struct udevice *dev)
1352 {
1353 #define UHEPI_SUPPORTED 1
1354 #define UHEPI_NOT_SUPPORTED 2
1355         static int uhepi_support;
1356
1357         if (!uhepi_support) {
1358                 uhepi_support = cros_ec_check_feature(dev,
1359                         EC_FEATURE_UNIFIED_WAKE_MASKS) > 0 ? UHEPI_SUPPORTED :
1360                         UHEPI_NOT_SUPPORTED;
1361                 log_debug("Chrome EC: UHEPI %s\n",
1362                           uhepi_support == UHEPI_SUPPORTED ? "supported" :
1363                           "not supported");
1364         }
1365         return uhepi_support == UHEPI_SUPPORTED;
1366 }
1367
1368 static int cros_ec_get_mask(struct udevice *dev, uint type)
1369 {
1370         u64 value = 0;
1371
1372         if (cros_ec_is_uhepi_supported(dev)) {
1373                 cros_ec_uhepi_cmd(dev, type, EC_HOST_EVENT_GET, &value);
1374         } else {
1375                 assert(type < ARRAY_SIZE(event_map));
1376                 cros_ec_handle_non_uhepi_cmd(dev, event_map[type].get_cmd,
1377                                              EC_HOST_EVENT_GET, &value);
1378         }
1379         return value;
1380 }
1381
1382 static int cros_ec_clear_mask(struct udevice *dev, uint type, u64 mask)
1383 {
1384         if (cros_ec_is_uhepi_supported(dev))
1385                 return cros_ec_uhepi_cmd(dev, type, EC_HOST_EVENT_CLEAR, &mask);
1386
1387         assert(type < ARRAY_SIZE(event_map));
1388
1389         return cros_ec_handle_non_uhepi_cmd(dev, event_map[type].clear_cmd,
1390                                             EC_HOST_EVENT_CLEAR, &mask);
1391 }
1392
1393 uint64_t cros_ec_get_events_b(struct udevice *dev)
1394 {
1395         return cros_ec_get_mask(dev, EC_HOST_EVENT_B);
1396 }
1397
1398 int cros_ec_clear_events_b(struct udevice *dev, uint64_t mask)
1399 {
1400         log_debug("Chrome EC: clear events_b mask to 0x%016llx\n", mask);
1401
1402         return cros_ec_clear_mask(dev, EC_HOST_EVENT_B, mask);
1403 }
1404
1405 int cros_ec_read_limit_power(struct udevice *dev, int *limit_powerp)
1406 {
1407         struct ec_params_charge_state p;
1408         struct ec_response_charge_state r;
1409         int ret;
1410
1411         p.cmd = CHARGE_STATE_CMD_GET_PARAM;
1412         p.get_param.param = CS_PARAM_LIMIT_POWER;
1413         ret = ec_command(dev, EC_CMD_CHARGE_STATE, 0, &p, sizeof(p),
1414                          &r, sizeof(r));
1415
1416         /*
1417          * If our EC doesn't support the LIMIT_POWER parameter, assume that
1418          * LIMIT_POWER is not requested.
1419          */
1420         if (ret == -EC_RES_INVALID_PARAM || ret == -EC_RES_INVALID_COMMAND) {
1421                 log_warning("PARAM_LIMIT_POWER not supported by EC\n");
1422                 return -ENOSYS;
1423         }
1424
1425         if (ret != sizeof(r.get_param))
1426                 return -EINVAL;
1427
1428         *limit_powerp = r.get_param.value;
1429         return 0;
1430 }
1431
1432 int cros_ec_config_powerbtn(struct udevice *dev, uint32_t flags)
1433 {
1434         struct ec_params_config_power_button params;
1435         int ret;
1436
1437         params.flags = flags;
1438         ret = ec_command(dev, EC_CMD_CONFIG_POWER_BUTTON, 0,
1439                          &params, sizeof(params), NULL, 0);
1440         if (ret < 0)
1441                 return ret;
1442
1443         return 0;
1444 }
1445
1446 int cros_ec_get_lid_shutdown_mask(struct udevice *dev)
1447 {
1448         u32 mask;
1449         int ret;
1450
1451         ret = cros_ec_get_event_mask(dev, EC_CMD_HOST_EVENT_GET_SMI_MASK,
1452                                      &mask);
1453         if (ret < 0)
1454                 return ret;
1455
1456         return !!(mask & EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED));
1457 }
1458
1459 int cros_ec_set_lid_shutdown_mask(struct udevice *dev, int enable)
1460 {
1461         u32 mask;
1462         int ret;
1463
1464         ret = cros_ec_get_event_mask(dev, EC_CMD_HOST_EVENT_GET_SMI_MASK,
1465                                      &mask);
1466         if (ret < 0)
1467                 return ret;
1468
1469         /* Set lid close event state in the EC SMI event mask */
1470         if (enable)
1471                 mask |= EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED);
1472         else
1473                 mask &= ~EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED);
1474
1475         ret = cros_ec_set_event_mask(dev, EC_CMD_HOST_EVENT_SET_SMI_MASK, mask);
1476         if (ret < 0)
1477                 return ret;
1478
1479         printf("EC: %sabled lid close event\n", enable ? "en" : "dis");
1480         return 0;
1481 }
1482
1483 UCLASS_DRIVER(cros_ec) = {
1484         .id             = UCLASS_CROS_EC,
1485         .name           = "cros-ec",
1486         .per_device_auto_alloc_size = sizeof(struct cros_ec_dev),
1487         .post_bind      = dm_scan_fdt_dev,
1488         .flags          = DM_UC_FLAG_ALLOC_PRIV_DMA,
1489 };