drivers/message/fusion/mptscsih.c

   1 /*
   2  *  linux/drivers/message/fusion/mptscsih.c
   3  *      For use with LSI PCI chip/adapter(s)
   4  *      running LSI Fusion MPT (Message Passing Technology) firmware.
   5  *
   6  *  Copyright (c) 1999-2008 LSI Corporation
   7  *  (mailto:DL-MPTFusionLinux@lsi.com)
   8  *
   9  */
  10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  11 /*
  12     This program is free software; you can redistribute it and/or modify
  13     it under the terms of the GNU General Public License as published by
  14     the Free Software Foundation; version 2 of the License.
  15
  16     This program is distributed in the hope that it will be useful,
  17     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19     GNU General Public License for more details.
  20
  21     NO WARRANTY
  22     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  23     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  24     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  25     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  26     solely responsible for determining the appropriateness of using and
  27     distributing the Program and assumes all risks associated with its
  28     exercise of rights under this Agreement, including but not limited to
  29     the risks and costs of program errors, damage to or loss of data,
  30     programs or equipment, and unavailability or interruption of operations.
  31
  32     DISCLAIMER OF LIABILITY
  33     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  34     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  35     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  36     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  37     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  38     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  39     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  40
  41     You should have received a copy of the GNU General Public License
  42     along with this program; if not, write to the Free Software
  43     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  44 */
  45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  46
  47 #include <linux/module.h>
  48 #include <linux/kernel.h>
  49 #include <linux/slab.h>
  50 #include <linux/init.h>
  51 #include <linux/errno.h>
  52 #include <linux/kdev_t.h>
  53 #include <linux/blkdev.h>
  54 #include <linux/delay.h>        /* for mdelay */
  55 #include <linux/interrupt.h>    /* needed for in_interrupt() proto */
  56 #include <linux/reboot.h>       /* notifier code */
  57 #include <linux/workqueue.h>
  58
  59 #include <scsi/scsi.h>
  60 #include <scsi/scsi_cmnd.h>
  61 #include <scsi/scsi_device.h>
  62 #include <scsi/scsi_host.h>
  63 #include <scsi/scsi_tcq.h>
  64 #include <scsi/scsi_dbg.h>
  65
  66 #include "mptbase.h"
  67 #include "mptscsih.h"
  68 #include "lsi/mpi_log_sas.h"
  69
  70 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  71 #define my_NAME         "Fusion MPT SCSI Host driver"
  72 #define my_VERSION      MPT_LINUX_VERSION_COMMON
  73 #define MYNAM           "mptscsih"
  74
  75 MODULE_AUTHOR(MODULEAUTHOR);
  76 MODULE_DESCRIPTION(my_NAME);
  77 MODULE_LICENSE("GPL");
  78 MODULE_VERSION(my_VERSION);
  79
  80 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
  81 /*
  82  *  Other private/forward protos...
  83  */
  84 struct scsi_cmnd        *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
  85 static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i);
  86 static void     mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd);
  87 static int      SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd);
  88 int             mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
  89 static void     mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq);
  90 int             mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
  91
  92 static int      mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
  93                                  SCSIIORequest_t *pReq, int req_idx);
  94 static void     mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
  95 static void     mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
  96
  97 int     mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id,
  98                 u64 lun, int ctx2abort, ulong timeout);
  99
 100 int             mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
 101 int             mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
 102
 103 void
 104 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
 105 static int      mptscsih_get_completion_code(MPT_ADAPTER *ioc,
 106                 MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
 107 int             mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
 108 static int      mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
 109 static void     mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
 110
 111 static int
 112 mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
 113                                 SCSITaskMgmtReply_t *pScsiTmReply);
 114 void            mptscsih_remove(struct pci_dev *);
 115 void            mptscsih_shutdown(struct pci_dev *);
 116 #ifdef CONFIG_PM
 117 int             mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
 118 int             mptscsih_resume(struct pci_dev *pdev);
 119 #endif
 120
 121 #define SNS_LEN(scp)    SCSI_SENSE_BUFFERSIZE
 122
 123
 124 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 125 /*
 126  *      mptscsih_getFreeChainBuffer - Function to get a free chain
 127  *      from the MPT_SCSI_HOST FreeChainQ.
 128  *      @ioc: Pointer to MPT_ADAPTER structure
 129  *      @req_idx: Index of the SCSI IO request frame. (output)
 130  *
 131  *      return SUCCESS or FAILED
 132  */
 133 static inline int
 134 mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
 135 {
 136         MPT_FRAME_HDR *chainBuf;
 137         unsigned long flags;
 138         int rc;
 139         int chain_idx;
 140
 141         dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n",
 142             ioc->name));
 143         spin_lock_irqsave(&ioc->FreeQlock, flags);
 144         if (!list_empty(&ioc->FreeChainQ)) {
 145                 int offset;
 146
 147                 chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR,
 148                                 u.frame.linkage.list);
 149                 list_del(&chainBuf->u.frame.linkage.list);
 150                 offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
 151                 chain_idx = offset / ioc->req_sz;
 152                 rc = SUCCESS;
 153                 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 154                     "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
 155                     ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
 156         } else {
 157                 rc = FAILED;
 158                 chain_idx = MPT_HOST_NO_CHAIN;
 159                 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n",
 160                     ioc->name));
 161         }
 162         spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 163
 164         *retIndex = chain_idx;
 165         return rc;
 166 } /* mptscsih_getFreeChainBuffer() */
 167
 168 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 169 /*
 170  *      mptscsih_AddSGE - Add a SGE (plus chain buffers) to the
 171  *      SCSIIORequest_t Message Frame.
 172  *      @ioc: Pointer to MPT_ADAPTER structure
 173  *      @SCpnt: Pointer to scsi_cmnd structure
 174  *      @pReq: Pointer to SCSIIORequest_t structure
 175  *
 176  *      Returns ...
 177  */
 178 static int
 179 mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
 180                 SCSIIORequest_t *pReq, int req_idx)
 181 {
 182         char    *psge;
 183         char    *chainSge;
 184         struct scatterlist *sg;
 185         int      frm_sz;
 186         int      sges_left, sg_done;
 187         int      chain_idx = MPT_HOST_NO_CHAIN;
 188         int      sgeOffset;
 189         int      numSgeSlots, numSgeThisFrame;
 190         u32      sgflags, sgdir, thisxfer = 0;
 191         int      chain_dma_off = 0;
 192         int      newIndex;
 193         int      ii;
 194         dma_addr_t v2;
 195         u32     RequestNB;
 196
 197         sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK;
 198         if (sgdir == MPI_SCSIIO_CONTROL_WRITE)  {
 199                 sgdir = MPT_TRANSFER_HOST_TO_IOC;
 200         } else {
 201                 sgdir = MPT_TRANSFER_IOC_TO_HOST;
 202         }
 203
 204         psge = (char *) &pReq->SGL;
 205         frm_sz = ioc->req_sz;
 206
 207         /* Map the data portion, if any.
 208          * sges_left  = 0 if no data transfer.
 209          */
 210         sges_left = scsi_dma_map(SCpnt);
 211         if (sges_left < 0)
 212                 return FAILED;
 213
 214         /* Handle the SG case.
 215          */
 216         sg = scsi_sglist(SCpnt);
 217         sg_done  = 0;
 218         sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION);
 219         chainSge = NULL;
 220
 221         /* Prior to entering this loop - the following must be set
 222          * current MF:  sgeOffset (bytes)
 223          *              chainSge (Null if original MF is not a chain buffer)
 224          *              sg_done (num SGE done for this MF)
 225          */
 226
 227 nextSGEset:
 228         numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size);
 229         numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
 230
 231         sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir;
 232
 233         /* Get first (num - 1) SG elements
 234          * Skip any SG entries with a length of 0
 235          * NOTE: at finish, sg and psge pointed to NEXT data/location positions
 236          */
 237         for (ii=0; ii < (numSgeThisFrame-1); ii++) {
 238                 thisxfer = sg_dma_len(sg);
 239                 if (thisxfer == 0) {
 240                         /* Get next SG element from the OS */
 241                         sg = sg_next(sg);
 242                         sg_done++;
 243                         continue;
 244                 }
 245
 246                 v2 = sg_dma_address(sg);
 247                 ioc->add_sge(psge, sgflags | thisxfer, v2);
 248
 249                 /* Get next SG element from the OS */
 250                 sg = sg_next(sg);
 251                 psge += ioc->SGE_size;
 252                 sgeOffset += ioc->SGE_size;
 253                 sg_done++;
 254         }
 255
 256         if (numSgeThisFrame == sges_left) {
 257                 /* Add last element, end of buffer and end of list flags.
 258                  */
 259                 sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT |
 260                                 MPT_SGE_FLAGS_END_OF_BUFFER |
 261                                 MPT_SGE_FLAGS_END_OF_LIST;
 262
 263                 /* Add last SGE and set termination flags.
 264                  * Note: Last SGE may have a length of 0 - which should be ok.
 265                  */
 266                 thisxfer = sg_dma_len(sg);
 267
 268                 v2 = sg_dma_address(sg);
 269                 ioc->add_sge(psge, sgflags | thisxfer, v2);
 270                 sgeOffset += ioc->SGE_size;
 271                 sg_done++;
 272
 273                 if (chainSge) {
 274                         /* The current buffer is a chain buffer,
 275                          * but there is not another one.
 276                          * Update the chain element
 277                          * Offset and Length fields.
 278                          */
 279                         ioc->add_chain((char *)chainSge, 0, sgeOffset,
 280                                 ioc->ChainBufferDMA + chain_dma_off);
 281                 } else {
 282                         /* The current buffer is the original MF
 283                          * and there is no Chain buffer.
 284                          */
 285                         pReq->ChainOffset = 0;
 286                         RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor)  + 1) & 0x03;
 287                         dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 288                             "Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
 289                         ioc->RequestNB[req_idx] = RequestNB;
 290                 }
 291         } else {
 292                 /* At least one chain buffer is needed.
 293                  * Complete the first MF
 294                  *  - last SGE element, set the LastElement bit
 295                  *  - set ChainOffset (words) for orig MF
 296                  *             (OR finish previous MF chain buffer)
 297                  *  - update MFStructPtr ChainIndex
 298                  *  - Populate chain element
 299                  * Also
 300                  * Loop until done.
 301                  */
 302
 303                 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SG: Chain Required! sg done %d\n",
 304                                 ioc->name, sg_done));
 305
 306                 /* Set LAST_ELEMENT flag for last non-chain element
 307                  * in the buffer. Since psge points at the NEXT
 308                  * SGE element, go back one SGE element, update the flags
 309                  * and reset the pointer. (Note: sgflags & thisxfer are already
 310                  * set properly).
 311                  */
 312                 if (sg_done) {
 313                         u32 *ptmp = (u32 *) (psge - ioc->SGE_size);
 314                         sgflags = le32_to_cpu(*ptmp);
 315                         sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
 316                         *ptmp = cpu_to_le32(sgflags);
 317                 }
 318
 319                 if (chainSge) {
 320                         /* The current buffer is a chain buffer.
 321                          * chainSge points to the previous Chain Element.
 322                          * Update its chain element Offset and Length (must
 323                          * include chain element size) fields.
 324                          * Old chain element is now complete.
 325                          */
 326                         u8 nextChain = (u8) (sgeOffset >> 2);
 327                         sgeOffset += ioc->SGE_size;
 328                         ioc->add_chain((char *)chainSge, nextChain, sgeOffset,
 329                                          ioc->ChainBufferDMA + chain_dma_off);
 330                 } else {
 331                         /* The original MF buffer requires a chain buffer -
 332                          * set the offset.
 333                          * Last element in this MF is a chain element.
 334                          */
 335                         pReq->ChainOffset = (u8) (sgeOffset >> 2);
 336                         RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor)  + 1) & 0x03;
 337                         dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
 338                         ioc->RequestNB[req_idx] = RequestNB;
 339                 }
 340
 341                 sges_left -= sg_done;
 342
 343
 344                 /* NOTE: psge points to the beginning of the chain element
 345                  * in current buffer. Get a chain buffer.
 346                  */
 347                 if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
 348                         dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 349                             "getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
 350                             ioc->name, pReq->CDB[0], SCpnt));
 351                         return FAILED;
 352                 }
 353
 354                 /* Update the tracking arrays.
 355                  * If chainSge == NULL, update ReqToChain, else ChainToChain
 356                  */
 357                 if (chainSge) {
 358                         ioc->ChainToChain[chain_idx] = newIndex;
 359                 } else {
 360                         ioc->ReqToChain[req_idx] = newIndex;
 361                 }
 362                 chain_idx = newIndex;
 363                 chain_dma_off = ioc->req_sz * chain_idx;
 364
 365                 /* Populate the chainSGE for the current buffer.
 366                  * - Set chain buffer pointer to psge and fill
 367                  *   out the Address and Flags fields.
 368                  */
 369                 chainSge = (char *) psge;
 370                 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "  Current buff @ %p (index 0x%x)",
 371                     ioc->name, psge, req_idx));
 372
 373                 /* Start the SGE for the next buffer
 374                  */
 375                 psge = (char *) (ioc->ChainBuffer + chain_dma_off);
 376                 sgeOffset = 0;
 377                 sg_done = 0;
 378
 379                 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "  Chain buff @ %p (index 0x%x)\n",
 380                     ioc->name, psge, chain_idx));
 381
 382                 /* Start the SGE for the next buffer
 383                  */
 384
 385                 goto nextSGEset;
 386         }
 387
 388         return SUCCESS;
 389 } /* mptscsih_AddSGE() */
 390
 391 static void
 392 mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget,
 393     U32 SlotStatus)
 394 {
 395         MPT_FRAME_HDR *mf;
 396         SEPRequest_t     *SEPMsg;
 397
 398         if (ioc->bus_type != SAS)
 399                 return;
 400
 401         /* Not supported for hidden raid components
 402          */
 403         if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
 404                 return;
 405
 406         if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
 407                 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n",
 408                     ioc->name,__func__));
 409                 return;
 410         }
 411
 412         SEPMsg = (SEPRequest_t *)mf;
 413         SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
 414         SEPMsg->Bus = vtarget->channel;
 415         SEPMsg->TargetID = vtarget->id;
 416         SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS;
 417         SEPMsg->SlotStatus = SlotStatus;
 418         devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 419             "Sending SEP cmd=%x channel=%d id=%d\n",
 420             ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID));
 421         mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
 422 }
 423
 424 #ifdef CONFIG_FUSION_LOGGING
 425 /**
 426  *      mptscsih_info_scsiio - debug print info on reply frame
 427  *      @ioc: Pointer to MPT_ADAPTER structure
 428  *      @sc: original scsi cmnd pointer
 429  *      @pScsiReply: Pointer to MPT reply frame
 430  *
 431  *      MPT_DEBUG_REPLY needs to be enabled to obtain this info
 432  *
 433  *      Refer to lsi/mpi.h.
 434  **/
 435 static void
 436 mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pScsiReply)
 437 {
 438         char    *desc = NULL;
 439         char    *desc1 = NULL;
 440         u16     ioc_status;
 441         u8      skey, asc, ascq;
 442
 443         ioc_status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
 444
 445         switch (ioc_status) {
 446
 447         case MPI_IOCSTATUS_SUCCESS:
 448                 desc = "success";
 449                 break;
 450         case MPI_IOCSTATUS_SCSI_INVALID_BUS:
 451                 desc = "invalid bus";
 452                 break;
 453         case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:
 454                 desc = "invalid target_id";
 455                 break;
 456         case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
 457                 desc = "device not there";
 458                 break;
 459         case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:
 460                 desc = "data overrun";
 461                 break;
 462         case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:
 463                 desc = "data underrun";
 464                 break;
 465         case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:
 466                 desc = "I/O data error";
 467                 break;
 468         case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:
 469                 desc = "protocol error";
 470                 break;
 471         case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:
 472                 desc = "task terminated";
 473                 break;
 474         case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
 475                 desc = "residual mismatch";
 476                 break;
 477         case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
 478                 desc = "task management failed";
 479                 break;
 480         case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:
 481                 desc = "IOC terminated";
 482                 break;
 483         case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:
 484                 desc = "ext terminated";
 485                 break;
 486         default:
 487                 desc = "";
 488                 break;
 489         }
 490
 491         switch (pScsiReply->SCSIStatus)
 492         {
 493
 494         case MPI_SCSI_STATUS_SUCCESS:
 495                 desc1 = "success";
 496                 break;
 497         case MPI_SCSI_STATUS_CHECK_CONDITION:
 498                 desc1 = "check condition";
 499                 break;
 500         case MPI_SCSI_STATUS_CONDITION_MET:
 501                 desc1 = "condition met";
 502                 break;
 503         case MPI_SCSI_STATUS_BUSY:
 504                 desc1 = "busy";
 505                 break;
 506         case MPI_SCSI_STATUS_INTERMEDIATE:
 507                 desc1 = "intermediate";
 508                 break;
 509         case MPI_SCSI_STATUS_INTERMEDIATE_CONDMET:
 510                 desc1 = "intermediate condmet";
 511                 break;
 512         case MPI_SCSI_STATUS_RESERVATION_CONFLICT:
 513                 desc1 = "reservation conflict";
 514                 break;
 515         case MPI_SCSI_STATUS_COMMAND_TERMINATED:
 516                 desc1 = "command terminated";
 517                 break;
 518         case MPI_SCSI_STATUS_TASK_SET_FULL:
 519                 desc1 = "task set full";
 520                 break;
 521         case MPI_SCSI_STATUS_ACA_ACTIVE:
 522                 desc1 = "aca active";
 523                 break;
 524         case MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT:
 525                 desc1 = "fcpext device logged out";
 526                 break;
 527         case MPI_SCSI_STATUS_FCPEXT_NO_LINK:
 528                 desc1 = "fcpext no link";
 529                 break;
 530         case MPI_SCSI_STATUS_FCPEXT_UNASSIGNED:
 531                 desc1 = "fcpext unassigned";
 532                 break;
 533         default:
 534                 desc1 = "";
 535                 break;
 536         }
 537
 538         scsi_print_command(sc);
 539         printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %llu\n",
 540             ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun);
 541         printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
 542             "resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow,
 543             scsi_get_resid(sc));
 544         printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
 545             "sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag),
 546             le32_to_cpu(pScsiReply->TransferCount), sc->result);
 547
 548         printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
 549             "scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n",
 550             ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus,
 551             pScsiReply->SCSIState);
 552
 553         if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
 554                 skey = sc->sense_buffer[2] & 0x0F;
 555                 asc = sc->sense_buffer[12];
 556                 ascq = sc->sense_buffer[13];
 557
 558                 printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: "
 559                     "[0x%02x,0x%02x,0x%02x]\n", ioc->name, skey, asc, ascq);
 560         }
 561
 562         /*
 563          *  Look for + dump FCP ResponseInfo[]!
 564          */
 565         if (pScsiReply->SCSIState & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
 566             pScsiReply->ResponseInfo)
 567                 printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n",
 568                     ioc->name, le32_to_cpu(pScsiReply->ResponseInfo));
 569 }
 570 #endif
 571
 572 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 573 /*
 574  *      mptscsih_io_done - Main SCSI IO callback routine registered to
 575  *      Fusion MPT (base) driver
 576  *      @ioc: Pointer to MPT_ADAPTER structure
 577  *      @mf: Pointer to original MPT request frame
 578  *      @r: Pointer to MPT reply frame (NULL if TurboReply)
 579  *
 580  *      This routine is called from mpt.c::mpt_interrupt() at the completion
 581  *      of any SCSI IO request.
 582  *      This routine is registered with the Fusion MPT (base) driver at driver
 583  *      load/init time via the mpt_register() API call.
 584  *
 585  *      Returns 1 indicating alloc'd request frame ptr should be freed.
 586  */
 587 int
 588 mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 589 {
 590         struct scsi_cmnd        *sc;
 591         MPT_SCSI_HOST   *hd;
 592         SCSIIORequest_t *pScsiReq;
 593         SCSIIOReply_t   *pScsiReply;
 594         u16              req_idx, req_idx_MR;
 595         VirtDevice       *vdevice;
 596         VirtTarget       *vtarget;
 597
 598         hd = shost_priv(ioc->sh);
 599         req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
 600         req_idx_MR = (mr != NULL) ?
 601             le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
 602
 603         /* Special case, where already freed message frame is received from
 604          * Firmware. It happens with Resetting IOC.
 605          * Return immediately. Do not care
 606          */
 607         if ((req_idx != req_idx_MR) ||
 608             (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf))
 609                 return 0;
 610
 611         sc = mptscsih_getclear_scsi_lookup(ioc, req_idx);
 612         if (sc == NULL) {
 613                 MPIHeader_t *hdr = (MPIHeader_t *)mf;
 614
 615                 /* Remark: writeSDP1 will use the ScsiDoneCtx
 616                  * If a SCSI I/O cmd, device disabled by OS and
 617                  * completion done. Cannot touch sc struct. Just free mem.
 618                  */
 619                 if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST)
 620                         printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n",
 621                         ioc->name);
 622
 623                 mptscsih_freeChainBuffers(ioc, req_idx);
 624                 return 1;
 625         }
 626
 627         if ((unsigned char *)mf != sc->host_scribble) {
 628                 mptscsih_freeChainBuffers(ioc, req_idx);
 629                 return 1;
 630         }
 631
 632         if (ioc->bus_type == SAS) {
 633                 VirtDevice *vdevice = sc->device->hostdata;
 634
 635                 if (!vdevice || !vdevice->vtarget ||
 636                     vdevice->vtarget->deleted) {
 637                         sc->result = DID_NO_CONNECT << 16;
 638                         goto out;
 639                 }
 640         }
 641
 642         sc->host_scribble = NULL;
 643         sc->result = DID_OK << 16;              /* Set default reply as OK */
 644         pScsiReq = (SCSIIORequest_t *) mf;
 645         pScsiReply = (SCSIIOReply_t *) mr;
 646
 647         if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
 648                 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 649                         "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
 650                         ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
 651         }else{
 652                 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 653                         "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
 654                         ioc->name, mf, mr, sc, req_idx));
 655         }
 656
 657         if (pScsiReply == NULL) {
 658                 /* special context reply handling */
 659                 ;
 660         } else {
 661                 u32      xfer_cnt;
 662                 u16      status;
 663                 u8       scsi_state, scsi_status;
 664                 u32      log_info;
 665
 666                 status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
 667
 668                 scsi_state = pScsiReply->SCSIState;
 669                 scsi_status = pScsiReply->SCSIStatus;
 670                 xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
 671                 scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
 672                 log_info = le32_to_cpu(pScsiReply->IOCLogInfo);
 673
 674                 /*
 675                  *  if we get a data underrun indication, yet no data was
 676                  *  transferred and the SCSI status indicates that the
 677                  *  command was never started, change the data underrun
 678                  *  to success
 679                  */
 680                 if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
 681                     (scsi_status == MPI_SCSI_STATUS_BUSY ||
 682                      scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT ||
 683                      scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) {
 684                         status = MPI_IOCSTATUS_SUCCESS;
 685                 }
 686
 687                 if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
 688                         mptscsih_copy_sense_data(sc, hd, mf, pScsiReply);
 689
 690                 /*
 691                  *  Look for + dump FCP ResponseInfo[]!
 692                  */
 693                 if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
 694                     pScsiReply->ResponseInfo) {
 695                         printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%llu] "
 696                         "FCP_ResponseInfo=%08xh\n", ioc->name,
 697                         sc->device->host->host_no, sc->device->channel,
 698                         sc->device->id, sc->device->lun,
 699                         le32_to_cpu(pScsiReply->ResponseInfo));
 700                 }
 701
 702                 switch(status) {
 703                 case MPI_IOCSTATUS_BUSY:                        /* 0x0002 */
 704                 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:      /* 0x0006 */
 705                         /* CHECKME!
 706                          * Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry)
 707                          * But not: DID_BUS_BUSY lest one risk
 708                          * killing interrupt handler:-(
 709                          */
 710                         sc->result = SAM_STAT_BUSY;
 711                         break;
 712
 713                 case MPI_IOCSTATUS_SCSI_INVALID_BUS:            /* 0x0041 */
 714                 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:       /* 0x0042 */
 715                         sc->result = DID_BAD_TARGET << 16;
 716                         break;
 717
 718                 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:       /* 0x0043 */
 719                         /* Spoof to SCSI Selection Timeout! */
 720                         if (ioc->bus_type != FC)
 721                                 sc->result = DID_NO_CONNECT << 16;
 722                         /* else fibre, just stall until rescan event */
 723                         else
 724                                 sc->result = DID_REQUEUE << 16;
 725
 726                         if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
 727                                 hd->sel_timeout[pScsiReq->TargetID]++;
 728
 729                         vdevice = sc->device->hostdata;
 730                         if (!vdevice)
 731                                 break;
 732                         vtarget = vdevice->vtarget;
 733                         if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) {
 734                                 mptscsih_issue_sep_command(ioc, vtarget,
 735                                     MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED);
 736                                 vtarget->tflags &= ~MPT_TARGET_FLAGS_LED_ON;
 737                         }
 738                         break;
 739
 740                 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:         /* 0x004B */
 741                         if ( ioc->bus_type == SAS ) {
 742                                 u16 ioc_status =
 743                                     le16_to_cpu(pScsiReply->IOCStatus);
 744                                 if ((ioc_status &
 745                                         MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
 746                                         &&
 747                                         ((log_info & SAS_LOGINFO_MASK) ==
 748                                         SAS_LOGINFO_NEXUS_LOSS)) {
 749                                                 VirtDevice *vdevice =
 750                                                 sc->device->hostdata;
 751
 752                                             /* flag the device as being in
 753                                              * device removal delay so we can
 754                                              * notify the midlayer to hold off
 755                                              * on timeout eh */
 756                                                 if (vdevice && vdevice->
 757                                                         vtarget &&
 758                                                         vdevice->vtarget->
 759                                                         raidVolume)
 760                                                         printk(KERN_INFO
 761                                                         "Skipping Raid Volume"
 762                                                         "for inDMD\n");
 763                                                 else if (vdevice &&
 764                                                         vdevice->vtarget)
 765                                                         vdevice->vtarget->
 766                                                                 inDMD = 1;
 767
 768                                             sc->result =
 769                                                     (DID_TRANSPORT_DISRUPTED
 770                                                     << 16);
 771                                             break;
 772                                 }
 773                         } else if (ioc->bus_type == FC) {
 774                                 /*
 775                                  * The FC IOC may kill a request for variety of
 776                                  * reasons, some of which may be recovered by a
 777                                  * retry, some which are unlikely to be
 778                                  * recovered. Return DID_ERROR instead of
 779                                  * DID_RESET to permit retry of the command,
 780                                  * just not an infinite number of them
 781                                  */
 782                                 sc->result = DID_ERROR << 16;
 783                                 break;
 784                         }
 785
 786                         /*
 787                          * Allow non-SAS & non-NEXUS_LOSS to drop into below code
 788                          */
 789                         /* Fall through */
 790
 791                 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:        /* 0x0048 */
 792                         /* Linux handles an unsolicited DID_RESET better
 793                          * than an unsolicited DID_ABORT.
 794                          */
 795                         sc->result = DID_RESET << 16;
 796                         break;
 797
 798                 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:         /* 0x004C */
 799                         if (ioc->bus_type == FC)
 800                                 sc->result = DID_ERROR << 16;
 801                         else
 802                                 sc->result = DID_RESET << 16;
 803                         break;
 804
 805                 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:      /* 0x0049 */
 806                         scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
 807                         if((xfer_cnt==0)||(sc->underflow > xfer_cnt))
 808                                 sc->result=DID_SOFT_ERROR << 16;
 809                         else /* Sufficient data transfer occurred */
 810                                 sc->result = (DID_OK << 16) | scsi_status;
 811                         dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 812                             "RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n",
 813                             ioc->name, sc->result, sc->device->channel, sc->device->id));
 814                         break;
 815
 816                 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:          /* 0x0045 */
 817                         /*
 818                          *  Do upfront check for valid SenseData and give it
 819                          *  precedence!
 820                          */
 821                         sc->result = (DID_OK << 16) | scsi_status;
 822                         if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
 823
 824                                 /*
 825                                  * For an Errata on LSI53C1030
 826                                  * When the length of request data
 827                                  * and transfer data are different
 828                                  * with result of command (READ or VERIFY),
 829                                  * DID_SOFT_ERROR is set.
 830                                  */
 831                                 if (ioc->bus_type == SPI) {
 832                                         if ((pScsiReq->CDB[0] == READ_6  && ((pScsiReq->CDB[1] & 0x02) == 0)) ||
 833                                             pScsiReq->CDB[0] == READ_10 ||
 834                                             pScsiReq->CDB[0] == READ_12 ||
 835                                                 (pScsiReq->CDB[0] == READ_16 &&
 836                                                 ((pScsiReq->CDB[1] & 0x02) == 0)) ||
 837                                             pScsiReq->CDB[0] == VERIFY  ||
 838                                             pScsiReq->CDB[0] == VERIFY_16) {
 839                                                 if (scsi_bufflen(sc) !=
 840                                                         xfer_cnt) {
 841                                                         sc->result =
 842                                                         DID_SOFT_ERROR << 16;
 843                                                     printk(KERN_WARNING "Errata"
 844                                                     "on LSI53C1030 occurred."
 845                                                     "sc->req_bufflen=0x%02x,"
 846                                                     "xfer_cnt=0x%02x\n",
 847                                                     scsi_bufflen(sc),
 848                                                     xfer_cnt);
 849                                                 }
 850                                         }
 851                                 }
 852
 853                                 if (xfer_cnt < sc->underflow) {
 854                                         if (scsi_status == SAM_STAT_BUSY)
 855                                                 sc->result = SAM_STAT_BUSY;
 856                                         else
 857                                                 sc->result = DID_SOFT_ERROR << 16;
 858                                 }
 859                                 if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
 860                                         /* What to do?
 861                                         */
 862                                         sc->result = DID_SOFT_ERROR << 16;
 863                                 }
 864                                 else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
 865                                         /*  Not real sure here either...  */
 866                                         sc->result = DID_RESET << 16;
 867                                 }
 868                         }
 869
 870
 871                         dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 872                             "  sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
 873                             ioc->name, sc->underflow));
 874                         dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
 875                             "  ActBytesXferd=%02xh\n", ioc->name, xfer_cnt));
 876
 877                         /* Report Queue Full
 878                          */
 879                         if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)
 880                                 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
 881
 882                         break;
 883
 884                 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:           /* 0x0044 */
 885                         scsi_set_resid(sc, 0);
 886                         /* Fall through */
 887                 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:        /* 0x0040 */
 888                 case MPI_IOCSTATUS_SUCCESS:                     /* 0x0000 */
 889                         sc->result = (DID_OK << 16) | scsi_status;
 890                         if (scsi_state == 0) {
 891                                 ;
 892                         } else if (scsi_state &
 893                             MPI_SCSI_STATE_AUTOSENSE_VALID) {
 894
 895                                 /*
 896                                  * For potential trouble on LSI53C1030.
 897                                  * (date:2007.xx.)
 898                                  * It is checked whether the length of
 899                                  * request data is equal to
 900                                  * the length of transfer and residual.
 901                                  * MEDIUM_ERROR is set by incorrect data.
 902                                  */
 903                                 if ((ioc->bus_type == SPI) &&
 904                                         (sc->sense_buffer[2] & 0x20)) {
 905                                         u32      difftransfer;
 906                                         difftransfer =
 907                                         sc->sense_buffer[3] << 24 |
 908                                         sc->sense_buffer[4] << 16 |
 909                                         sc->sense_buffer[5] << 8 |
 910                                         sc->sense_buffer[6];
 911                                         if (((sc->sense_buffer[3] & 0x80) ==
 912                                                 0x80) && (scsi_bufflen(sc)
 913                                                 != xfer_cnt)) {
 914                                                 sc->sense_buffer[2] =
 915                                                     MEDIUM_ERROR;
 916                                                 sc->sense_buffer[12] = 0xff;
 917                                                 sc->sense_buffer[13] = 0xff;
 918                                                 printk(KERN_WARNING"Errata"
 919                                                 "on LSI53C1030 occurred."
 920                                                 "sc->req_bufflen=0x%02x,"
 921                                                 "xfer_cnt=0x%02x\n" ,
 922                                                 scsi_bufflen(sc),
 923                                                 xfer_cnt);
 924                                         }
 925                                         if (((sc->sense_buffer[3] & 0x80)
 926                                                 != 0x80) &&
 927                                                 (scsi_bufflen(sc) !=
 928                                                 xfer_cnt + difftransfer)) {
 929                                                 sc->sense_buffer[2] =
 930                                                         MEDIUM_ERROR;
 931                                                 sc->sense_buffer[12] = 0xff;
 932                                                 sc->sense_buffer[13] = 0xff;
 933                                                 printk(KERN_WARNING
 934                                                 "Errata on LSI53C1030 occurred"
 935                                                 "sc->req_bufflen=0x%02x,"
 936                                                 " xfer_cnt=0x%02x,"
 937                                                 "difftransfer=0x%02x\n",
 938                                                 scsi_bufflen(sc),
 939                                                 xfer_cnt,
 940                                                 difftransfer);
 941                                         }
 942                                 }
 943
 944                                 /*
 945                                  * If running against circa 200003dd 909 MPT f/w,
 946                                  * may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
 947                                  * (QUEUE_FULL) returned from device! --> get 0x0000?128
 948                                  * and with SenseBytes set to 0.
 949                                  */
 950                                 if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL)
 951                                         mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
 952
 953                         }
 954                         else if (scsi_state &
 955                                  (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)
 956                            ) {
 957                                 /*
 958                                  * What to do?
 959                                  */
 960                                 sc->result = DID_SOFT_ERROR << 16;
 961                         }
 962                         else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
 963                                 /*  Not real sure here either...  */
 964                                 sc->result = DID_RESET << 16;
 965                         }
 966                         else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) {
 967                                 /* Device Inq. data indicates that it supports
 968                                  * QTags, but rejects QTag messages.
 969                                  * This command completed OK.
 970                                  *
 971                                  * Not real sure here either so do nothing...  */
 972                         }
 973
 974                         if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL)
 975                                 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
 976
 977                         /* Add handling of:
 978                          * Reservation Conflict, Busy,
 979                          * Command Terminated, CHECK
 980                          */
 981                         break;
 982
 983                 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:         /* 0x0047 */
 984                         sc->result = DID_SOFT_ERROR << 16;
 985                         break;
 986
 987                 case MPI_IOCSTATUS_INVALID_FUNCTION:            /* 0x0001 */
 988                 case MPI_IOCSTATUS_INVALID_SGL:                 /* 0x0003 */
 989                 case MPI_IOCSTATUS_INTERNAL_ERROR:              /* 0x0004 */
 990                 case MPI_IOCSTATUS_RESERVED:                    /* 0x0005 */
 991                 case MPI_IOCSTATUS_INVALID_FIELD:               /* 0x0007 */
 992                 case MPI_IOCSTATUS_INVALID_STATE:               /* 0x0008 */
 993                 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:          /* 0x0046 */
 994                 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:       /* 0x004A */
 995                 default:
 996                         /*
 997                          * What to do?
 998                          */
 999                         sc->result = DID_SOFT_ERROR << 16;
1000                         break;
1001
1002                 }       /* switch(status) */
1003
1004 #ifdef CONFIG_FUSION_LOGGING
1005                 if (sc->result && (ioc->debug_level & MPT_DEBUG_REPLY))
1006                         mptscsih_info_scsiio(ioc, sc, pScsiReply);
1007 #endif
1008
1009         } /* end of address reply case */
1010 out:
1011         /* Unmap the DMA buffers, if any. */
1012         scsi_dma_unmap(sc);
1013
1014         sc->scsi_done(sc);              /* Issue the command callback */
1015
1016         /* Free Chain buffers */
1017         mptscsih_freeChainBuffers(ioc, req_idx);
1018         return 1;
1019 }
1020
1021 /*
1022  *      mptscsih_flush_running_cmds - For each command found, search
1023  *              Scsi_Host instance taskQ and reply to OS.
1024  *              Called only if recovering from a FW reload.
1025  *      @hd: Pointer to a SCSI HOST structure
1026  *
1027  *      Returns: None.
1028  *
1029  *      Must be called while new I/Os are being queued.
1030  */
1031 void
1032 mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
1033 {
1034         MPT_ADAPTER *ioc = hd->ioc;
1035         struct scsi_cmnd *sc;
1036         SCSIIORequest_t *mf = NULL;
1037         int              ii;
1038         int              channel, id;
1039
1040         for (ii= 0; ii < ioc->req_depth; ii++) {
1041                 sc = mptscsih_getclear_scsi_lookup(ioc, ii);
1042                 if (!sc)
1043                         continue;
1044                 mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
1045                 if (!mf)
1046                         continue;
1047                 channel = mf->Bus;
1048                 id = mf->TargetID;
1049                 mptscsih_freeChainBuffers(ioc, ii);
1050                 mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
1051                 if ((unsigned char *)mf != sc->host_scribble)
1052                         continue;
1053                 scsi_dma_unmap(sc);
1054                 sc->result = DID_RESET << 16;
1055                 sc->host_scribble = NULL;
1056                 dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
1057                     "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, "
1058                     "idx=%x\n", ioc->name, channel, id, sc, mf, ii));
1059                 sc->scsi_done(sc);
1060         }
1061 }
1062 EXPORT_SYMBOL(mptscsih_flush_running_cmds);
1063
1064 /*
1065  *      mptscsih_search_running_cmds - Delete any commands associated
1066  *              with the specified target and lun. Function called only
1067  *              when a lun is disable by mid-layer.
1068  *              Do NOT access the referenced scsi_cmnd structure or
1069  *              members. Will cause either a paging or NULL ptr error.
1070  *              (BUT, BUT, BUT, the code does reference it! - mdr)
1071  *      @hd: Pointer to a SCSI HOST structure
1072  *      @vdevice: per device private data
1073  *
1074  *      Returns: None.
1075  *
1076  *      Called from slave_destroy.
1077  */
1078 static void
1079 mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
1080 {
1081         SCSIIORequest_t *mf = NULL;
1082         int              ii;
1083         struct scsi_cmnd *sc;
1084         struct scsi_lun  lun;
1085         MPT_ADAPTER *ioc = hd->ioc;
1086         unsigned long   flags;
1087
1088         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1089         for (ii = 0; ii < ioc->req_depth; ii++) {
1090                 if ((sc = ioc->ScsiLookup[ii]) != NULL) {
1091
1092                         mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
1093                         if (mf == NULL)
1094                                 continue;
1095                         /* If the device is a hidden raid component, then its
1096                          * expected that the mf->function will be RAID_SCSI_IO
1097                          */
1098                         if (vdevice->vtarget->tflags &
1099                             MPT_TARGET_FLAGS_RAID_COMPONENT && mf->Function !=
1100                             MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)
1101                                 continue;
1102
1103                         int_to_scsilun(vdevice->lun, &lun);
1104                         if ((mf->Bus != vdevice->vtarget->channel) ||
1105                             (mf->TargetID != vdevice->vtarget->id) ||
1106                             memcmp(lun.scsi_lun, mf->LUN, 8))
1107                                 continue;
1108
1109                         if ((unsigned char *)mf != sc->host_scribble)
1110                                 continue;
1111                         ioc->ScsiLookup[ii] = NULL;
1112                         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1113                         mptscsih_freeChainBuffers(ioc, ii);
1114                         mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
1115                         scsi_dma_unmap(sc);
1116                         sc->host_scribble = NULL;
1117                         sc->result = DID_NO_CONNECT << 16;
1118                         dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device,
1119                            MYIOC_s_FMT "completing cmds: fw_channel %d, "
1120                            "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name,
1121                            vdevice->vtarget->channel, vdevice->vtarget->id,
1122                            sc, mf, ii));
1123                         sc->scsi_done(sc);
1124                         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1125                 }
1126         }
1127         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1128         return;
1129 }
1130
1131 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1132
1133 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1134 /*
1135  *      mptscsih_report_queue_full - Report QUEUE_FULL status returned
1136  *      from a SCSI target device.
1137  *      @sc: Pointer to scsi_cmnd structure
1138  *      @pScsiReply: Pointer to SCSIIOReply_t
1139  *      @pScsiReq: Pointer to original SCSI request
1140  *
1141  *      This routine periodically reports QUEUE_FULL status returned from a
1142  *      SCSI target device.  It reports this to the console via kernel
1143  *      printk() API call, not more than once every 10 seconds.
1144  */
1145 static void
1146 mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq)
1147 {
1148         long time = jiffies;
1149         MPT_SCSI_HOST           *hd;
1150         MPT_ADAPTER     *ioc;
1151
1152         if (sc->device == NULL)
1153                 return;
1154         if (sc->device->host == NULL)
1155                 return;
1156         if ((hd = shost_priv(sc->device->host)) == NULL)
1157                 return;
1158         ioc = hd->ioc;
1159         if (time - hd->last_queue_full > 10 * HZ) {
1160                 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Device (%d:%d:%llu) reported QUEUE_FULL!\n",
1161                                 ioc->name, 0, sc->device->id, sc->device->lun));
1162                 hd->last_queue_full = time;
1163         }
1164 }
1165
1166 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1167 /*
1168  *      mptscsih_remove - Removed scsi devices
1169  *      @pdev: Pointer to pci_dev structure
1170  *
1171  *
1172  */
1173 void
1174 mptscsih_remove(struct pci_dev *pdev)
1175 {
1176         MPT_ADAPTER             *ioc = pci_get_drvdata(pdev);
1177         struct Scsi_Host        *host = ioc->sh;
1178         MPT_SCSI_HOST           *hd;
1179         int sz1;
1180
1181         if((hd = shost_priv(host)) == NULL)
1182                 return;
1183
1184         mptscsih_shutdown(pdev);
1185
1186         sz1=0;
1187
1188         if (ioc->ScsiLookup != NULL) {
1189                 sz1 = ioc->req_depth * sizeof(void *);
1190                 kfree(ioc->ScsiLookup);
1191                 ioc->ScsiLookup = NULL;
1192         }
1193
1194         dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1195             "Free'd ScsiLookup (%d) memory\n",
1196             ioc->name, sz1));
1197
1198         kfree(hd->info_kbuf);
1199
1200         /* NULL the Scsi_Host pointer
1201          */
1202         ioc->sh = NULL;
1203
1204         scsi_host_put(host);
1205
1206         mpt_detach(pdev);
1207
1208 }
1209
1210 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1211 /*
1212  *      mptscsih_shutdown - reboot notifier
1213  *
1214  */
1215 void
1216 mptscsih_shutdown(struct pci_dev *pdev)
1217 {
1218 }
1219
1220 #ifdef CONFIG_PM
1221 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1222 /*
1223  *      mptscsih_suspend - Fusion MPT scsi driver suspend routine.
1224  *
1225  *
1226  */
1227 int
1228 mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
1229 {
1230         MPT_ADAPTER             *ioc = pci_get_drvdata(pdev);
1231
1232         scsi_block_requests(ioc->sh);
1233         flush_scheduled_work();
1234         mptscsih_shutdown(pdev);
1235         return mpt_suspend(pdev,state);
1236 }
1237
1238 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1239 /*
1240  *      mptscsih_resume - Fusion MPT scsi driver resume routine.
1241  *
1242  *
1243  */
1244 int
1245 mptscsih_resume(struct pci_dev *pdev)
1246 {
1247         MPT_ADAPTER             *ioc = pci_get_drvdata(pdev);
1248         int rc;
1249
1250         rc = mpt_resume(pdev);
1251         scsi_unblock_requests(ioc->sh);
1252         return rc;
1253 }
1254
1255 #endif
1256
1257 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1258 /**
1259  *      mptscsih_info - Return information about MPT adapter
1260  *      @SChost: Pointer to Scsi_Host structure
1261  *
1262  *      (linux scsi_host_template.info routine)
1263  *
1264  *      Returns pointer to buffer where information was written.
1265  */
1266 const char *
1267 mptscsih_info(struct Scsi_Host *SChost)
1268 {
1269         MPT_SCSI_HOST *h;
1270         int size = 0;
1271
1272         h = shost_priv(SChost);
1273
1274         if (h->info_kbuf == NULL)
1275                 if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL)
1276                         return h->info_kbuf;
1277         h->info_kbuf[0] = '\0';
1278
1279         mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0);
1280         h->info_kbuf[size-1] = '\0';
1281
1282         return h->info_kbuf;
1283 }
1284
1285 int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host)
1286 {
1287         MPT_SCSI_HOST   *hd = shost_priv(host);
1288         MPT_ADAPTER     *ioc = hd->ioc;
1289
1290         seq_printf(m, "%s: %s, ", ioc->name, ioc->prod_name);
1291         seq_printf(m, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word);
1292         seq_printf(m, "Ports=%d, ", ioc->facts.NumberOfPorts);
1293         seq_printf(m, "MaxQ=%d\n", ioc->req_depth);
1294
1295         return 0;
1296 }
1297
1298 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1299 #define ADD_INDEX_LOG(req_ent)  do { } while(0)
1300
1301 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1302 /**
1303  *      mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine.
1304  *      @SCpnt: Pointer to scsi_cmnd structure
1305  *
1306  *      (linux scsi_host_template.queuecommand routine)
1307  *      This is the primary SCSI IO start routine.  Create a MPI SCSIIORequest
1308  *      from a linux scsi_cmnd request and send it to the IOC.
1309  *
1310  *      Returns 0. (rtn value discarded by linux scsi mid-layer)
1311  */
1312 int
1313 mptscsih_qcmd(struct scsi_cmnd *SCpnt)
1314 {
1315         MPT_SCSI_HOST           *hd;
1316         MPT_FRAME_HDR           *mf;
1317         SCSIIORequest_t         *pScsiReq;
1318         VirtDevice              *vdevice = SCpnt->device->hostdata;
1319         u32      datalen;
1320         u32      scsictl;
1321         u32      scsidir;
1322         u32      cmd_len;
1323         int      my_idx;
1324         int      ii;
1325         MPT_ADAPTER *ioc;
1326
1327         hd = shost_priv(SCpnt->device->host);
1328         ioc = hd->ioc;
1329
1330         dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p\n",
1331                 ioc->name, SCpnt));
1332
1333         if (ioc->taskmgmt_quiesce_io)
1334                 return SCSI_MLQUEUE_HOST_BUSY;
1335
1336         /*
1337          *  Put together a MPT SCSI request...
1338          */
1339         if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
1340                 dprintk(ioc, printk(MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n",
1341                                 ioc->name));
1342                 return SCSI_MLQUEUE_HOST_BUSY;
1343         }
1344
1345         pScsiReq = (SCSIIORequest_t *) mf;
1346
1347         my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
1348
1349         ADD_INDEX_LOG(my_idx);
1350
1351         /*    TUR's being issued with scsictl=0x02000000 (DATA_IN)!
1352          *    Seems we may receive a buffer (datalen>0) even when there
1353          *    will be no data transfer!  GRRRRR...
1354          */
1355         if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
1356                 datalen = scsi_bufflen(SCpnt);
1357                 scsidir = MPI_SCSIIO_CONTROL_READ;      /* DATA IN  (host<--ioc<--dev) */
1358         } else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
1359                 datalen = scsi_bufflen(SCpnt);
1360                 scsidir = MPI_SCSIIO_CONTROL_WRITE;     /* DATA OUT (host-->ioc-->dev) */
1361         } else {
1362                 datalen = 0;
1363                 scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER;
1364         }
1365
1366         /* Default to untagged. Once a target structure has been allocated,
1367          * use the Inquiry data to determine if device supports tagged.
1368          */
1369         if ((vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) &&
1370             SCpnt->device->tagged_supported)
1371                 scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ;
1372         else
1373                 scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED;
1374
1375
1376         /* Use the above information to set up the message frame
1377          */
1378         pScsiReq->TargetID = (u8) vdevice->vtarget->id;
1379         pScsiReq->Bus = vdevice->vtarget->channel;
1380         pScsiReq->ChainOffset = 0;
1381         if (vdevice->vtarget->tflags &  MPT_TARGET_FLAGS_RAID_COMPONENT)
1382                 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
1383         else
1384                 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
1385         pScsiReq->CDBLength = SCpnt->cmd_len;
1386         pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
1387         pScsiReq->Reserved = 0;
1388         pScsiReq->MsgFlags = mpt_msg_flags(ioc);
1389         int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
1390         pScsiReq->Control = cpu_to_le32(scsictl);
1391
1392         /*
1393          *  Write SCSI CDB into the message
1394          */
1395         cmd_len = SCpnt->cmd_len;
1396         for (ii=0; ii < cmd_len; ii++)
1397                 pScsiReq->CDB[ii] = SCpnt->cmnd[ii];
1398
1399         for (ii=cmd_len; ii < 16; ii++)
1400                 pScsiReq->CDB[ii] = 0;
1401
1402         /* DataLength */
1403         pScsiReq->DataLength = cpu_to_le32(datalen);
1404
1405         /* SenseBuffer low address */
1406         pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
1407                                            + (my_idx * MPT_SENSE_BUFFER_ALLOC));
1408
1409         /* Now add the SG list
1410          * Always have a SGE even if null length.
1411          */
1412         if (datalen == 0) {
1413                 /* Add a NULL SGE */
1414                 ioc->add_sge((char *)&pScsiReq->SGL,
1415                         MPT_SGE_FLAGS_SSIMPLE_READ | 0,
1416                         (dma_addr_t) -1);
1417         } else {
1418                 /* Add a 32 or 64 bit SGE */
1419                 if (mptscsih_AddSGE(ioc, SCpnt, pScsiReq, my_idx) != SUCCESS)
1420                         goto fail;
1421         }
1422
1423         SCpnt->host_scribble = (unsigned char *)mf;
1424         mptscsih_set_scsi_lookup(ioc, my_idx, SCpnt);
1425
1426         mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
1427         dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
1428                         ioc->name, SCpnt, mf, my_idx));
1429         DBG_DUMP_REQUEST_FRAME(ioc, (u32 *)mf);
1430         return 0;
1431
1432  fail:
1433         mptscsih_freeChainBuffers(ioc, my_idx);
1434         mpt_free_msg_frame(ioc, mf);
1435         return SCSI_MLQUEUE_HOST_BUSY;
1436 }
1437
1438 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1439 /*
1440  *      mptscsih_freeChainBuffers - Function to free chain buffers associated
1441  *      with a SCSI IO request
1442  *      @hd: Pointer to the MPT_SCSI_HOST instance
1443  *      @req_idx: Index of the SCSI IO request frame.
1444  *
1445  *      Called if SG chain buffer allocation fails and mptscsih callbacks.
1446  *      No return.
1447  */
1448 static void
1449 mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
1450 {
1451         MPT_FRAME_HDR *chain;
1452         unsigned long flags;
1453         int chain_idx;
1454         int next;
1455
1456         /* Get the first chain index and reset
1457          * tracker state.
1458          */
1459         chain_idx = ioc->ReqToChain[req_idx];
1460         ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN;
1461
1462         while (chain_idx != MPT_HOST_NO_CHAIN) {
1463
1464                 /* Save the next chain buffer index */
1465                 next = ioc->ChainToChain[chain_idx];
1466
1467                 /* Free this chain buffer and reset
1468                  * tracker
1469                  */
1470                 ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN;
1471
1472                 chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer
1473                                         + (chain_idx * ioc->req_sz));
1474
1475                 spin_lock_irqsave(&ioc->FreeQlock, flags);
1476                 list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ);
1477                 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1478
1479                 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FreeChainBuffers (index %d)\n",
1480                                 ioc->name, chain_idx));
1481
1482                 /* handle next */
1483                 chain_idx = next;
1484         }
1485         return;
1486 }
1487
1488 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1489 /*
1490  *      Reset Handling
1491  */
1492
1493 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1494 /**
1495  *      mptscsih_IssueTaskMgmt - Generic send Task Management function.
1496  *      @hd: Pointer to MPT_SCSI_HOST structure
1497  *      @type: Task Management type
1498  *      @channel: channel number for task management
1499  *      @id: Logical Target ID for reset (if appropriate)
1500  *      @lun: Logical Unit for reset (if appropriate)
1501  *      @ctx2abort: Context for the task to be aborted (if appropriate)
1502  *      @timeout: timeout for task management control
1503  *
1504  *      Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
1505  *      or a non-interrupt thread.  In the former, must not call schedule().
1506  *
1507  *      Not all fields are meaningfull for all task types.
1508  *
1509  *      Returns 0 for SUCCESS, or FAILED.
1510  *
1511  **/
1512 int
1513 mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, u64 lun,
1514         int ctx2abort, ulong timeout)
1515 {
1516         MPT_FRAME_HDR   *mf;
1517         SCSITaskMgmt_t  *pScsiTm;
1518         int              ii;
1519         int              retval;
1520         MPT_ADAPTER     *ioc = hd->ioc;
1521         unsigned long    timeleft;
1522         u8               issue_hard_reset;
1523         u32              ioc_raw_state;
1524         unsigned long    time_count;
1525
1526         issue_hard_reset = 0;
1527         ioc_raw_state = mpt_GetIocState(ioc, 0);
1528
1529         if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
1530                 printk(MYIOC_s_WARN_FMT
1531                         "TaskMgmt type=%x: IOC Not operational (0x%x)!\n",
1532                         ioc->name, type, ioc_raw_state);
1533                 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
1534                     ioc->name, __func__);
1535                 if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
1536                         printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset "
1537                             "FAILED!!\n", ioc->name);
1538                 return 0;
1539         }
1540
1541         /* DOORBELL ACTIVE check is not required if
1542         *  MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q is supported.
1543         */
1544
1545         if (!((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q)
1546                  && (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) &&
1547                 (ioc_raw_state & MPI_DOORBELL_ACTIVE)) {
1548                 printk(MYIOC_s_WARN_FMT
1549                         "TaskMgmt type=%x: ioc_state: "
1550                         "DOORBELL_ACTIVE (0x%x)!\n",
1551                         ioc->name, type, ioc_raw_state);
1552                 return FAILED;
1553         }
1554
1555         mutex_lock(&ioc->taskmgmt_cmds.mutex);
1556         if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
1557                 mf = NULL;
1558                 retval = FAILED;
1559                 goto out;
1560         }
1561
1562         /* Return Fail to calling function if no message frames available.
1563          */
1564         if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
1565                 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1566                         "TaskMgmt no msg frames!!\n", ioc->name));
1567                 retval = FAILED;
1568                 mpt_clear_taskmgmt_in_progress_flag(ioc);
1569                 goto out;
1570         }
1571         dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
1572                         ioc->name, mf));
1573
1574         /* Format the Request
1575          */
1576         pScsiTm = (SCSITaskMgmt_t *) mf;
1577         pScsiTm->TargetID = id;
1578         pScsiTm->Bus = channel;
1579         pScsiTm->ChainOffset = 0;
1580         pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
1581
1582         pScsiTm->Reserved = 0;
1583         pScsiTm->TaskType = type;
1584         pScsiTm->Reserved1 = 0;
1585         pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS)
1586                     ? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0;
1587
1588         int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
1589
1590         for (ii=0; ii < 7; ii++)
1591                 pScsiTm->Reserved2[ii] = 0;
1592
1593         pScsiTm->TaskMsgContext = ctx2abort;
1594
1595         dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) "
1596                 "task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort,
1597                 type, timeout));
1598
1599         DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm);
1600
1601         INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
1602         time_count = jiffies;
1603         if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
1604             (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
1605                 mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
1606         else {
1607                 retval = mpt_send_handshake_request(ioc->TaskCtx, ioc,
1608                         sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
1609                 if (retval) {
1610                         dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1611                                 "TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n",
1612                                 ioc->name, mf, retval));
1613                         mpt_free_msg_frame(ioc, mf);
1614                         mpt_clear_taskmgmt_in_progress_flag(ioc);
1615                         goto out;
1616                 }
1617         }
1618
1619         timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
1620                 timeout*HZ);
1621         if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
1622                 retval = FAILED;
1623                 dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
1624                     "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf));
1625                 mpt_clear_taskmgmt_in_progress_flag(ioc);
1626                 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
1627                         goto out;
1628                 issue_hard_reset = 1;
1629                 goto out;
1630         }
1631
1632         retval = mptscsih_taskmgmt_reply(ioc, type,
1633             (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply);
1634
1635         dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1636             "TaskMgmt completed (%d seconds)\n",
1637             ioc->name, jiffies_to_msecs(jiffies - time_count)/1000));
1638
1639  out:
1640
1641         CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
1642         if (issue_hard_reset) {
1643                 printk(MYIOC_s_WARN_FMT
1644                        "Issuing Reset from %s!! doorbell=0x%08x\n",
1645                        ioc->name, __func__, mpt_GetIocState(ioc, 0));
1646                 retval = (ioc->bus_type == SAS) ?
1647                         mpt_HardResetHandler(ioc, CAN_SLEEP) :
1648                         mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
1649                 mpt_free_msg_frame(ioc, mf);
1650         }
1651
1652         retval = (retval == 0) ? 0 : FAILED;
1653         mutex_unlock(&ioc->taskmgmt_cmds.mutex);
1654         return retval;
1655 }
1656 EXPORT_SYMBOL(mptscsih_IssueTaskMgmt);
1657
1658 static int
1659 mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
1660 {
1661         switch (ioc->bus_type) {
1662         case FC:
1663                 return 40;
1664         case SAS:
1665                 return 30;
1666         case SPI:
1667         default:
1668                 return 10;
1669         }
1670 }
1671
1672 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1673 /**
1674  *      mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant
1675  *      @SCpnt: Pointer to scsi_cmnd structure, IO to be aborted
1676  *
1677  *      (linux scsi_host_template.eh_abort_handler routine)
1678  *
1679  *      Returns SUCCESS or FAILED.
1680  **/
1681 int
1682 mptscsih_abort(struct scsi_cmnd * SCpnt)
1683 {
1684         MPT_SCSI_HOST   *hd;
1685         MPT_FRAME_HDR   *mf;
1686         u32              ctx2abort;
1687         int              scpnt_idx;
1688         int              retval;
1689         VirtDevice       *vdevice;
1690         MPT_ADAPTER     *ioc;
1691
1692         /* If we can't locate our host adapter structure, return FAILED status.
1693          */
1694         if ((hd = shost_priv(SCpnt->device->host)) == NULL) {
1695                 SCpnt->result = DID_RESET << 16;
1696                 SCpnt->scsi_done(SCpnt);
1697                 printk(KERN_ERR MYNAM ": task abort: "
1698                     "can't locate host! (sc=%p)\n", SCpnt);
1699                 return FAILED;
1700         }
1701
1702         ioc = hd->ioc;
1703         printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n",
1704                ioc->name, SCpnt);
1705         scsi_print_command(SCpnt);
1706
1707         vdevice = SCpnt->device->hostdata;
1708         if (!vdevice || !vdevice->vtarget) {
1709                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1710                     "task abort: device has been deleted (sc=%p)\n",
1711                     ioc->name, SCpnt));
1712                 SCpnt->result = DID_NO_CONNECT << 16;
1713                 SCpnt->scsi_done(SCpnt);
1714                 retval = SUCCESS;
1715                 goto out;
1716         }
1717
1718         /* Task aborts are not supported for hidden raid components.
1719          */
1720         if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
1721                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1722                     "task abort: hidden raid component (sc=%p)\n",
1723                     ioc->name, SCpnt));
1724                 SCpnt->result = DID_RESET << 16;
1725                 retval = FAILED;
1726                 goto out;
1727         }
1728
1729         /* Task aborts are not supported for volumes.
1730          */
1731         if (vdevice->vtarget->raidVolume) {
1732                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1733                     "task abort: raid volume (sc=%p)\n",
1734                     ioc->name, SCpnt));
1735                 SCpnt->result = DID_RESET << 16;
1736                 retval = FAILED;
1737                 goto out;
1738         }
1739
1740         /* Find this command
1741          */
1742         if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(ioc, SCpnt)) < 0) {
1743                 /* Cmd not found in ScsiLookup.
1744                  * Do OS callback.
1745                  */
1746                 SCpnt->result = DID_RESET << 16;
1747                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: "
1748                    "Command not in the active list! (sc=%p)\n", ioc->name,
1749                    SCpnt));
1750                 retval = SUCCESS;
1751                 goto out;
1752         }
1753
1754         if (ioc->timeouts < -1)
1755                 ioc->timeouts++;
1756
1757         if (mpt_fwfault_debug)
1758                 mpt_halt_firmware(ioc);
1759
1760         /* Most important!  Set TaskMsgContext to SCpnt's MsgContext!
1761          * (the IO to be ABORT'd)
1762          *
1763          * NOTE: Since we do not byteswap MsgContext, we do not
1764          *       swap it here either.  It is an opaque cookie to
1765          *       the controller, so it does not matter. -DaveM
1766          */
1767         mf = MPT_INDEX_2_MFPTR(ioc, scpnt_idx);
1768         ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext;
1769         retval = mptscsih_IssueTaskMgmt(hd,
1770                          MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
1771                          vdevice->vtarget->channel,
1772                          vdevice->vtarget->id, vdevice->lun,
1773                          ctx2abort, mptscsih_get_tm_timeout(ioc));
1774
1775         if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) {
1776                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1777                     "task abort: command still in active list! (sc=%p)\n",
1778                     ioc->name, SCpnt));
1779                 retval = FAILED;
1780         } else {
1781                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1782                     "task abort: command cleared from active list! (sc=%p)\n",
1783                     ioc->name, SCpnt));
1784                 retval = SUCCESS;
1785         }
1786
1787  out:
1788         printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n",
1789             ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval,
1790             SCpnt);
1791
1792         return retval;
1793 }
1794
1795 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1796 /**
1797  *      mptscsih_dev_reset - Perform a SCSI TARGET_RESET!  new_eh variant
1798  *      @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1799  *
1800  *      (linux scsi_host_template.eh_dev_reset_handler routine)
1801  *
1802  *      Returns SUCCESS or FAILED.
1803  **/
1804 int
1805 mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
1806 {
1807         MPT_SCSI_HOST   *hd;
1808         int              retval;
1809         VirtDevice       *vdevice;
1810         MPT_ADAPTER     *ioc;
1811
1812         /* If we can't locate our host adapter structure, return FAILED status.
1813          */
1814         if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1815                 printk(KERN_ERR MYNAM ": target reset: "
1816                    "Can't locate host! (sc=%p)\n", SCpnt);
1817                 return FAILED;
1818         }
1819
1820         ioc = hd->ioc;
1821         printk(MYIOC_s_INFO_FMT "attempting target reset! (sc=%p)\n",
1822                ioc->name, SCpnt);
1823         scsi_print_command(SCpnt);
1824
1825         vdevice = SCpnt->device->hostdata;
1826         if (!vdevice || !vdevice->vtarget) {
1827                 retval = 0;
1828                 goto out;
1829         }
1830
1831         /* Target reset to hidden raid component is not supported
1832          */
1833         if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
1834                 retval = FAILED;
1835                 goto out;
1836         }
1837
1838         retval = mptscsih_IssueTaskMgmt(hd,
1839                                 MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
1840                                 vdevice->vtarget->channel,
1841                                 vdevice->vtarget->id, 0, 0,
1842                                 mptscsih_get_tm_timeout(ioc));
1843
1844  out:
1845         printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n",
1846             ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1847
1848         if (retval == 0)
1849                 return SUCCESS;
1850         else
1851                 return FAILED;
1852 }
1853
1854
1855 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1856 /**
1857  *      mptscsih_bus_reset - Perform a SCSI BUS_RESET!  new_eh variant
1858  *      @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1859  *
1860  *      (linux scsi_host_template.eh_bus_reset_handler routine)
1861  *
1862  *      Returns SUCCESS or FAILED.
1863  **/
1864 int
1865 mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
1866 {
1867         MPT_SCSI_HOST   *hd;
1868         int              retval;
1869         VirtDevice       *vdevice;
1870         MPT_ADAPTER     *ioc;
1871
1872         /* If we can't locate our host adapter structure, return FAILED status.
1873          */
1874         if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1875                 printk(KERN_ERR MYNAM ": bus reset: "
1876                    "Can't locate host! (sc=%p)\n", SCpnt);
1877                 return FAILED;
1878         }
1879
1880         ioc = hd->ioc;
1881         printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n",
1882                ioc->name, SCpnt);
1883         scsi_print_command(SCpnt);
1884
1885         if (ioc->timeouts < -1)
1886                 ioc->timeouts++;
1887
1888         vdevice = SCpnt->device->hostdata;
1889         if (!vdevice || !vdevice->vtarget)
1890                 return SUCCESS;
1891         retval = mptscsih_IssueTaskMgmt(hd,
1892                                         MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
1893                                         vdevice->vtarget->channel, 0, 0, 0,
1894                                         mptscsih_get_tm_timeout(ioc));
1895
1896         printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
1897             ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1898
1899         if (retval == 0)
1900                 return SUCCESS;
1901         else
1902                 return FAILED;
1903 }
1904
1905 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1906 /**
1907  *      mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
1908  *      @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1909  *
1910  *      (linux scsi_host_template.eh_host_reset_handler routine)
1911  *
1912  *      Returns SUCCESS or FAILED.
1913  */
1914 int
1915 mptscsih_host_reset(struct scsi_cmnd *SCpnt)
1916 {
1917         MPT_SCSI_HOST *  hd;
1918         int              status = SUCCESS;
1919         MPT_ADAPTER     *ioc;
1920         int             retval;
1921
1922         /*  If we can't locate the host to reset, then we failed. */
1923         if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1924                 printk(KERN_ERR MYNAM ": host reset: "
1925                     "Can't locate host! (sc=%p)\n", SCpnt);
1926                 return FAILED;
1927         }
1928
1929         /* make sure we have no outstanding commands at this stage */
1930         mptscsih_flush_running_cmds(hd);
1931
1932         ioc = hd->ioc;
1933         printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
1934             ioc->name, SCpnt);
1935
1936         /*  If our attempts to reset the host failed, then return a failed
1937          *  status.  The host will be taken off line by the SCSI mid-layer.
1938          */
1939         retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
1940         if (retval < 0)
1941                 status = FAILED;
1942         else
1943                 status = SUCCESS;
1944
1945         printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
1946             ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1947
1948         return status;
1949 }
1950
1951 static int
1952 mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
1953         SCSITaskMgmtReply_t *pScsiTmReply)
1954 {
1955         u16                      iocstatus;
1956         u32                      termination_count;
1957         int                      retval;
1958
1959         if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
1960                 retval = FAILED;
1961                 goto out;
1962         }
1963
1964         DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
1965
1966         iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
1967         termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
1968
1969         dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1970             "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n"
1971             "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n"
1972             "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus,
1973             pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus),
1974             le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode,
1975             termination_count));
1976
1977         if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
1978             pScsiTmReply->ResponseCode)
1979                 mptscsih_taskmgmt_response_code(ioc,
1980                     pScsiTmReply->ResponseCode);
1981
1982         if (iocstatus == MPI_IOCSTATUS_SUCCESS) {
1983                 retval = 0;
1984                 goto out;
1985         }
1986
1987         retval = FAILED;
1988         if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
1989                 if (termination_count == 1)
1990                         retval = 0;
1991                 goto out;
1992         }
1993
1994         if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
1995            iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
1996                 retval = 0;
1997
1998  out:
1999         return retval;
2000 }
2001
2002 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2003 void
2004 mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
2005 {
2006         char *desc;
2007
2008         switch (response_code) {
2009         case MPI_SCSITASKMGMT_RSP_TM_COMPLETE:
2010                 desc = "The task completed.";
2011                 break;
2012         case MPI_SCSITASKMGMT_RSP_INVALID_FRAME:
2013                 desc = "The IOC received an invalid frame status.";
2014                 break;
2015         case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
2016                 desc = "The task type is not supported.";
2017                 break;
2018         case MPI_SCSITASKMGMT_RSP_TM_FAILED:
2019                 desc = "The requested task failed.";
2020                 break;
2021         case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED:
2022                 desc = "The task completed successfully.";
2023                 break;
2024         case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN:
2025                 desc = "The LUN request is invalid.";
2026                 break;
2027         case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
2028                 desc = "The task is in the IOC queue and has not been sent to target.";
2029                 break;
2030         default:
2031                 desc = "unknown";
2032                 break;
2033         }
2034         printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
2035                 ioc->name, response_code, desc);
2036 }
2037 EXPORT_SYMBOL(mptscsih_taskmgmt_response_code);
2038
2039 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2040 /**
2041  *      mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver
2042  *      @ioc: Pointer to MPT_ADAPTER structure
2043  *      @mf: Pointer to SCSI task mgmt request frame
2044  *      @mr: Pointer to SCSI task mgmt reply frame
2045  *
2046  *      This routine is called from mptbase.c::mpt_interrupt() at the completion
2047  *      of any SCSI task management request.
2048  *      This routine is registered with the MPT (base) driver at driver
2049  *      load/init time via the mpt_register() API call.
2050  *
2051  *      Returns 1 indicating alloc'd request frame ptr should be freed.
2052  **/
2053 int
2054 mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf,
2055         MPT_FRAME_HDR *mr)
2056 {
2057         dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2058                 "TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr));
2059
2060         ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
2061
2062         if (!mr)
2063                 goto out;
2064
2065         ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
2066         memcpy(ioc->taskmgmt_cmds.reply, mr,
2067             min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
2068  out:
2069         if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
2070                 mpt_clear_taskmgmt_in_progress_flag(ioc);
2071                 ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
2072                 complete(&ioc->taskmgmt_cmds.done);
2073                 if (ioc->bus_type == SAS)
2074                         ioc->schedule_target_reset(ioc);
2075                 return 1;
2076         }
2077         return 0;
2078 }
2079
2080 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2081 /*
2082  *      This is anyones guess quite frankly.
2083  */
2084 int
2085 mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev,
2086                 sector_t capacity, int geom[])
2087 {
2088         int             heads;
2089         int             sectors;
2090         sector_t        cylinders;
2091         ulong           dummy;
2092
2093         heads = 64;
2094         sectors = 32;
2095
2096         dummy = heads * sectors;
2097         cylinders = capacity;
2098         sector_div(cylinders,dummy);
2099
2100         /*
2101          * Handle extended translation size for logical drives
2102          * > 1Gb
2103          */
2104         if ((ulong)capacity >= 0x200000) {
2105                 heads = 255;
2106                 sectors = 63;
2107                 dummy = heads * sectors;
2108                 cylinders = capacity;
2109                 sector_div(cylinders,dummy);
2110         }
2111
2112         /* return result */
2113         geom[0] = heads;
2114         geom[1] = sectors;
2115         geom[2] = cylinders;
2116
2117         return 0;
2118 }
2119
2120 /* Search IOC page 3 to determine if this is hidden physical disk
2121  *
2122  */
2123 int
2124 mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
2125 {
2126         struct inactive_raid_component_info *component_info;
2127         int i, j;
2128         RaidPhysDiskPage1_t *phys_disk;
2129         int rc = 0;
2130         int num_paths;
2131
2132         if (!ioc->raid_data.pIocPg3)
2133                 goto out;
2134         for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2135                 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
2136                     (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
2137                         rc = 1;
2138                         goto out;
2139                 }
2140         }
2141
2142         if (ioc->bus_type != SAS)
2143                 goto out;
2144
2145         /*
2146          * Check if dual path
2147          */
2148         for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2149                 num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
2150                     ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
2151                 if (num_paths < 2)
2152                         continue;
2153                 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
2154                    (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
2155                 if (!phys_disk)
2156                         continue;
2157                 if ((mpt_raid_phys_disk_pg1(ioc,
2158                     ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
2159                     phys_disk))) {
2160                         kfree(phys_disk);
2161                         continue;
2162                 }
2163                 for (j = 0; j < num_paths; j++) {
2164                         if ((phys_disk->Path[j].Flags &
2165                             MPI_RAID_PHYSDISK1_FLAG_INVALID))
2166                                 continue;
2167                         if ((phys_disk->Path[j].Flags &
2168                             MPI_RAID_PHYSDISK1_FLAG_BROKEN))
2169                                 continue;
2170                         if ((id == phys_disk->Path[j].PhysDiskID) &&
2171                             (channel == phys_disk->Path[j].PhysDiskBus)) {
2172                                 rc = 1;
2173                                 kfree(phys_disk);
2174                                 goto out;
2175                         }
2176                 }
2177                 kfree(phys_disk);
2178         }
2179
2180
2181         /*
2182          * Check inactive list for matching phys disks
2183          */
2184         if (list_empty(&ioc->raid_data.inactive_list))
2185                 goto out;
2186
2187         mutex_lock(&ioc->raid_data.inactive_list_mutex);
2188         list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
2189             list) {
2190                 if ((component_info->d.PhysDiskID == id) &&
2191                     (component_info->d.PhysDiskBus == channel))
2192                         rc = 1;
2193         }
2194         mutex_unlock(&ioc->raid_data.inactive_list_mutex);
2195
2196  out:
2197         return rc;
2198 }
2199 EXPORT_SYMBOL(mptscsih_is_phys_disk);
2200
2201 u8
2202 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
2203 {
2204         struct inactive_raid_component_info *component_info;
2205         int i, j;
2206         RaidPhysDiskPage1_t *phys_disk;
2207         int rc = -ENXIO;
2208         int num_paths;
2209
2210         if (!ioc->raid_data.pIocPg3)
2211                 goto out;
2212         for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2213                 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
2214                     (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
2215                         rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
2216                         goto out;
2217                 }
2218         }
2219
2220         if (ioc->bus_type != SAS)
2221                 goto out;
2222
2223         /*
2224          * Check if dual path
2225          */
2226         for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2227                 num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
2228                     ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
2229                 if (num_paths < 2)
2230                         continue;
2231                 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
2232                    (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
2233                 if (!phys_disk)
2234                         continue;
2235                 if ((mpt_raid_phys_disk_pg1(ioc,
2236                     ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
2237                     phys_disk))) {
2238                         kfree(phys_disk);
2239                         continue;
2240                 }
2241                 for (j = 0; j < num_paths; j++) {
2242                         if ((phys_disk->Path[j].Flags &
2243                             MPI_RAID_PHYSDISK1_FLAG_INVALID))
2244                                 continue;
2245                         if ((phys_disk->Path[j].Flags &
2246                             MPI_RAID_PHYSDISK1_FLAG_BROKEN))
2247                                 continue;
2248                         if ((id == phys_disk->Path[j].PhysDiskID) &&
2249                             (channel == phys_disk->Path[j].PhysDiskBus)) {
2250                                 rc = phys_disk->PhysDiskNum;
2251                                 kfree(phys_disk);
2252                                 goto out;
2253                         }
2254                 }
2255                 kfree(phys_disk);
2256         }
2257
2258         /*
2259          * Check inactive list for matching phys disks
2260          */
2261         if (list_empty(&ioc->raid_data.inactive_list))
2262                 goto out;
2263
2264         mutex_lock(&ioc->raid_data.inactive_list_mutex);
2265         list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
2266             list) {
2267                 if ((component_info->d.PhysDiskID == id) &&
2268                     (component_info->d.PhysDiskBus == channel))
2269                         rc = component_info->d.PhysDiskNum;
2270         }
2271         mutex_unlock(&ioc->raid_data.inactive_list_mutex);
2272
2273  out:
2274         return rc;
2275 }
2276 EXPORT_SYMBOL(mptscsih_raid_id_to_num);
2277
2278 /*
2279  *      OS entry point to allow for host driver to free allocated memory
2280  *      Called if no device present or device being unloaded
2281  */
2282 void
2283 mptscsih_slave_destroy(struct scsi_device *sdev)
2284 {
2285         struct Scsi_Host        *host = sdev->host;
2286         MPT_SCSI_HOST           *hd = shost_priv(host);
2287         VirtTarget              *vtarget;
2288         VirtDevice              *vdevice;
2289         struct scsi_target      *starget;
2290
2291         starget = scsi_target(sdev);
2292         vtarget = starget->hostdata;
2293         vdevice = sdev->hostdata;
2294         if (!vdevice)
2295                 return;
2296
2297         mptscsih_search_running_cmds(hd, vdevice);
2298         vtarget->num_luns--;
2299         mptscsih_synchronize_cache(hd, vdevice);
2300         kfree(vdevice);
2301         sdev->hostdata = NULL;
2302 }
2303
2304 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2305 /*
2306  *      mptscsih_change_queue_depth - This function will set a devices queue depth
2307  *      @sdev: per scsi_device pointer
2308  *      @qdepth: requested queue depth
2309  *
2310  *      Adding support for new 'change_queue_depth' api.
2311 */
2312 int
2313 mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
2314 {
2315         MPT_SCSI_HOST           *hd = shost_priv(sdev->host);
2316         VirtTarget              *vtarget;
2317         struct scsi_target      *starget;
2318         int                     max_depth;
2319         MPT_ADAPTER             *ioc = hd->ioc;
2320
2321         starget = scsi_target(sdev);
2322         vtarget = starget->hostdata;
2323
2324         if (ioc->bus_type == SPI) {
2325                 if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
2326                         max_depth = 1;
2327                 else if (sdev->type == TYPE_DISK &&
2328                          vtarget->minSyncFactor <= MPT_ULTRA160)
2329                         max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
2330                 else
2331                         max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
2332         } else
2333                  max_depth = ioc->sh->can_queue;
2334
2335         if (!sdev->tagged_supported)
2336                 max_depth = 1;
2337
2338         if (qdepth > max_depth)
2339                 qdepth = max_depth;
2340
2341         return scsi_change_queue_depth(sdev, qdepth);
2342 }
2343
2344 /*
2345  *      OS entry point to adjust the queue_depths on a per-device basis.
2346  *      Called once per device the bus scan. Use it to force the queue_depth
2347  *      member to 1 if a device does not support Q tags.
2348  *      Return non-zero if fails.
2349  */
2350 int
2351 mptscsih_slave_configure(struct scsi_device *sdev)
2352 {
2353         struct Scsi_Host        *sh = sdev->host;
2354         VirtTarget              *vtarget;
2355         VirtDevice              *vdevice;
2356         struct scsi_target      *starget;
2357         MPT_SCSI_HOST           *hd = shost_priv(sh);
2358         MPT_ADAPTER             *ioc = hd->ioc;
2359
2360         starget = scsi_target(sdev);
2361         vtarget = starget->hostdata;
2362         vdevice = sdev->hostdata;
2363
2364         dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2365                 "device @ %p, channel=%d, id=%d, lun=%llu\n",
2366                 ioc->name, sdev, sdev->channel, sdev->id, sdev->lun));
2367         if (ioc->bus_type == SPI)
2368                 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2369                     "sdtr %d wdtr %d ppr %d inq length=%d\n",
2370                     ioc->name, sdev->sdtr, sdev->wdtr,
2371                     sdev->ppr, sdev->inquiry_len));
2372
2373         vdevice->configured_lun = 1;
2374
2375         dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2376                 "Queue depth=%d, tflags=%x\n",
2377                 ioc->name, sdev->queue_depth, vtarget->tflags));
2378
2379         if (ioc->bus_type == SPI)
2380                 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2381                     "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n",
2382                     ioc->name, vtarget->negoFlags, vtarget->maxOffset,
2383                     vtarget->minSyncFactor));
2384
2385         mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
2386         dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2387                 "tagged %d, simple %d\n",
2388                 ioc->name,sdev->tagged_supported, sdev->simple_tags));
2389
2390         blk_queue_dma_alignment (sdev->request_queue, 512 - 1);
2391
2392         return 0;
2393 }
2394
2395 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2396 /*
2397  *  Private routines...
2398  */
2399
2400 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2401 /* Utility function to copy sense data from the scsi_cmnd buffer
2402  * to the FC and SCSI target structures.
2403  *
2404  */
2405 static void
2406 mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply)
2407 {
2408         VirtDevice      *vdevice;
2409         SCSIIORequest_t *pReq;
2410         u32              sense_count = le32_to_cpu(pScsiReply->SenseCount);
2411         MPT_ADAPTER     *ioc = hd->ioc;
2412
2413         /* Get target structure
2414          */
2415         pReq = (SCSIIORequest_t *) mf;
2416         vdevice = sc->device->hostdata;
2417
2418         if (sense_count) {
2419                 u8 *sense_data;
2420                 int req_index;
2421
2422                 /* Copy the sense received into the scsi command block. */
2423                 req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
2424                 sense_data = ((u8 *)ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC));
2425                 memcpy(sc->sense_buffer, sense_data, SNS_LEN(sc));
2426
2427                 /* Log SMART data (asc = 0x5D, non-IM case only) if required.
2428                  */
2429                 if ((ioc->events) && (ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) {
2430                         if ((sense_data[12] == 0x5D) && (vdevice->vtarget->raidVolume == 0)) {
2431                                 int idx;
2432
2433                                 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
2434                                 ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE;
2435                                 ioc->events[idx].eventContext = ioc->eventContext;
2436
2437                                 ioc->events[idx].data[0] = (pReq->LUN[1] << 24) |
2438                                         (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) |
2439                                         (sc->device->channel << 8) | sc->device->id;
2440
2441                                 ioc->events[idx].data[1] = (sense_data[13] << 8) | sense_data[12];
2442
2443                                 ioc->eventContext++;
2444                                 if (ioc->pcidev->vendor ==
2445                                     PCI_VENDOR_ID_IBM) {
2446                                         mptscsih_issue_sep_command(ioc,
2447                                             vdevice->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
2448                                         vdevice->vtarget->tflags |=
2449                                             MPT_TARGET_FLAGS_LED_ON;
2450                                 }
2451                         }
2452                 }
2453         } else {
2454                 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hmmm... SenseData len=0! (?)\n",
2455                                 ioc->name));
2456         }
2457 }
2458
2459 /**
2460  * mptscsih_get_scsi_lookup - retrieves scmd entry
2461  * @ioc: Pointer to MPT_ADAPTER structure
2462  * @i: index into the array
2463  *
2464  * Returns the scsi_cmd pointer
2465  */
2466 struct scsi_cmnd *
2467 mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
2468 {
2469         unsigned long   flags;
2470         struct scsi_cmnd *scmd;
2471
2472         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2473         scmd = ioc->ScsiLookup[i];
2474         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2475
2476         return scmd;
2477 }
2478 EXPORT_SYMBOL(mptscsih_get_scsi_lookup);
2479
2480 /**
2481  * mptscsih_getclear_scsi_lookup -  retrieves and clears scmd entry from ScsiLookup[] array list
2482  * @ioc: Pointer to MPT_ADAPTER structure
2483  * @i: index into the array
2484  *
2485  * Returns the scsi_cmd pointer
2486  *
2487  **/
2488 static struct scsi_cmnd *
2489 mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
2490 {
2491         unsigned long   flags;
2492         struct scsi_cmnd *scmd;
2493
2494         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2495         scmd = ioc->ScsiLookup[i];
2496         ioc->ScsiLookup[i] = NULL;
2497         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2498
2499         return scmd;
2500 }
2501
2502 /**
2503  * mptscsih_set_scsi_lookup - write a scmd entry into the ScsiLookup[] array list
2504  *
2505  * @ioc: Pointer to MPT_ADAPTER structure
2506  * @i: index into the array
2507  * @scmd: scsi_cmnd pointer
2508  *
2509  **/
2510 static void
2511 mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd)
2512 {
2513         unsigned long   flags;
2514
2515         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2516         ioc->ScsiLookup[i] = scmd;
2517         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2518 }
2519
2520 /**
2521  * SCPNT_TO_LOOKUP_IDX - searches for a given scmd in the ScsiLookup[] array list
2522  * @ioc: Pointer to MPT_ADAPTER structure
2523  * @sc: scsi_cmnd pointer
2524  */
2525 static int
2526 SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *sc)
2527 {
2528         unsigned long   flags;
2529         int i, index=-1;
2530
2531         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2532         for (i = 0; i < ioc->req_depth; i++) {
2533                 if (ioc->ScsiLookup[i] == sc) {
2534                         index = i;
2535                         goto out;
2536                 }
2537         }
2538
2539  out:
2540         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2541         return index;
2542 }
2543
2544 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2545 int
2546 mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
2547 {
2548         MPT_SCSI_HOST   *hd;
2549
2550         if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL)
2551                 return 0;
2552
2553         hd = shost_priv(ioc->sh);
2554         switch (reset_phase) {
2555         case MPT_IOC_SETUP_RESET:
2556                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2557                     "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
2558                 break;
2559         case MPT_IOC_PRE_RESET:
2560                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2561                     "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
2562                 mptscsih_flush_running_cmds(hd);
2563                 break;
2564         case MPT_IOC_POST_RESET:
2565                 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2566                     "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
2567                 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) {
2568                         ioc->internal_cmds.status |=
2569                                 MPT_MGMT_STATUS_DID_IOCRESET;
2570                         complete(&ioc->internal_cmds.done);
2571                 }
2572                 break;
2573         default:
2574                 break;
2575         }
2576         return 1;               /* currently means nothing really */
2577 }
2578
2579 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2580 int
2581 mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
2582 {
2583         u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
2584
2585         devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2586                 "MPT event (=%02Xh) routed to SCSI host driver!\n",
2587                 ioc->name, event));
2588
2589         if ((event == MPI_EVENT_IOC_BUS_RESET ||
2590             event == MPI_EVENT_EXT_BUS_RESET) &&
2591             (ioc->bus_type == SPI) && (ioc->soft_resets < -1))
2592                         ioc->soft_resets++;
2593
2594         return 1;               /* currently means nothing really */
2595 }
2596
2597 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2598 /*
2599  *  Bus Scan and Domain Validation functionality ...
2600  */
2601
2602 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2603 /*
2604  *      mptscsih_scandv_complete - Scan and DV callback routine registered
2605  *      to Fustion MPT (base) driver.
2606  *
2607  *      @ioc: Pointer to MPT_ADAPTER structure
2608  *      @mf: Pointer to original MPT request frame
2609  *      @mr: Pointer to MPT reply frame (NULL if TurboReply)
2610  *
2611  *      This routine is called from mpt.c::mpt_interrupt() at the completion
2612  *      of any SCSI IO request.
2613  *      This routine is registered with the Fusion MPT (base) driver at driver
2614  *      load/init time via the mpt_register() API call.
2615  *
2616  *      Returns 1 indicating alloc'd request frame ptr should be freed.
2617  *
2618  *      Remark: Sets a completion code and (possibly) saves sense data
2619  *      in the IOC member localReply structure.
2620  *      Used ONLY for DV and other internal commands.
2621  */
2622 int
2623 mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
2624                                 MPT_FRAME_HDR *reply)
2625 {
2626         SCSIIORequest_t *pReq;
2627         SCSIIOReply_t   *pReply;
2628         u8               cmd;
2629         u16              req_idx;
2630         u8      *sense_data;
2631         int              sz;
2632
2633         ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
2634         ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD;
2635         if (!reply)
2636                 goto out;
2637
2638         pReply = (SCSIIOReply_t *) reply;
2639         pReq = (SCSIIORequest_t *) req;
2640         ioc->internal_cmds.completion_code =
2641             mptscsih_get_completion_code(ioc, req, reply);
2642         ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
2643         memcpy(ioc->internal_cmds.reply, reply,
2644             min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength));
2645         cmd = reply->u.hdr.Function;
2646         if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
2647             (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) &&
2648             (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
2649                 req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
2650                 sense_data = ((u8 *)ioc->sense_buf_pool +
2651                     (req_idx * MPT_SENSE_BUFFER_ALLOC));
2652                 sz = min_t(int, pReq->SenseBufferLength,
2653                     MPT_SENSE_BUFFER_ALLOC);
2654                 memcpy(ioc->internal_cmds.sense, sense_data, sz);
2655         }
2656  out:
2657         if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING))
2658                 return 0;
2659         ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
2660         complete(&ioc->internal_cmds.done);
2661         return 1;
2662 }
2663
2664
2665 /**
2666  *      mptscsih_get_completion_code - get completion code from MPT request
2667  *      @ioc: Pointer to MPT_ADAPTER structure
2668  *      @req: Pointer to original MPT request frame
2669  *      @reply: Pointer to MPT reply frame (NULL if TurboReply)
2670  *
2671  **/
2672 static int
2673 mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
2674                                 MPT_FRAME_HDR *reply)
2675 {
2676         SCSIIOReply_t   *pReply;
2677         MpiRaidActionReply_t *pr;
2678         u8               scsi_status;
2679         u16              status;
2680         int              completion_code;
2681
2682         pReply = (SCSIIOReply_t *)reply;
2683         status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
2684         scsi_status = pReply->SCSIStatus;
2685
2686         devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2687             "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh,"
2688             "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState,
2689             scsi_status, le32_to_cpu(pReply->IOCLogInfo)));
2690
2691         switch (status) {
2692
2693         case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:       /* 0x0043 */
2694                 completion_code = MPT_SCANDV_SELECTION_TIMEOUT;
2695                 break;
2696
2697         case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:          /* 0x0046 */
2698         case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:        /* 0x0048 */
2699         case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:         /* 0x004B */
2700         case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:         /* 0x004C */
2701                 completion_code = MPT_SCANDV_DID_RESET;
2702                 break;
2703
2704         case MPI_IOCSTATUS_BUSY:
2705         case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
2706                 completion_code = MPT_SCANDV_BUSY;
2707                 break;
2708
2709         case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:          /* 0x0045 */
2710         case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:        /* 0x0040 */
2711         case MPI_IOCSTATUS_SUCCESS:                     /* 0x0000 */
2712                 if (pReply->Function == MPI_FUNCTION_CONFIG) {
2713                         completion_code = MPT_SCANDV_GOOD;
2714                 } else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
2715                         pr = (MpiRaidActionReply_t *)reply;
2716                         if (le16_to_cpu(pr->ActionStatus) ==
2717                                 MPI_RAID_ACTION_ASTATUS_SUCCESS)
2718                                 completion_code = MPT_SCANDV_GOOD;
2719                         else
2720                                 completion_code = MPT_SCANDV_SOME_ERROR;
2721                 } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)
2722                         completion_code = MPT_SCANDV_SENSE;
2723                 else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
2724                         if (req->u.scsireq.CDB[0] == INQUIRY)
2725                                 completion_code = MPT_SCANDV_ISSUE_SENSE;
2726                         else
2727                                 completion_code = MPT_SCANDV_DID_RESET;
2728                 } else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
2729                         completion_code = MPT_SCANDV_DID_RESET;
2730                 else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
2731                         completion_code = MPT_SCANDV_DID_RESET;
2732                 else if (scsi_status == MPI_SCSI_STATUS_BUSY)
2733                         completion_code = MPT_SCANDV_BUSY;
2734                 else
2735                         completion_code = MPT_SCANDV_GOOD;
2736                 break;
2737
2738         case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:         /* 0x0047 */
2739                 if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
2740                         completion_code = MPT_SCANDV_DID_RESET;
2741                 else
2742                         completion_code = MPT_SCANDV_SOME_ERROR;
2743                 break;
2744         default:
2745                 completion_code = MPT_SCANDV_SOME_ERROR;
2746                 break;
2747
2748         }       /* switch(status) */
2749
2750         devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2751             "  completionCode set to %08xh\n", ioc->name, completion_code));
2752         return completion_code;
2753 }
2754
2755 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2756 /**
2757  *      mptscsih_do_cmd - Do internal command.
2758  *      @hd: MPT_SCSI_HOST pointer
2759  *      @io: INTERNAL_CMD pointer.
2760  *
2761  *      Issue the specified internally generated command and do command
2762  *      specific cleanup. For bus scan / DV only.
2763  *      NOTES: If command is Inquiry and status is good,
2764  *      initialize a target structure, save the data
2765  *
2766  *      Remark: Single threaded access only.
2767  *
2768  *      Return:
2769  *              < 0 if an illegal command or no resources
2770  *
2771  *                 0 if good
2772  *
2773  *               > 0 if command complete but some type of completion error.
2774  */
2775 static int
2776 mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
2777 {
2778         MPT_FRAME_HDR   *mf;
2779         SCSIIORequest_t *pScsiReq;
2780         int              my_idx, ii, dir;
2781         int              timeout;
2782         char             cmdLen;
2783         char             CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
2784         u8               cmd = io->cmd;
2785         MPT_ADAPTER *ioc = hd->ioc;
2786         int              ret = 0;
2787         unsigned long    timeleft;
2788         unsigned long    flags;
2789
2790         /* don't send internal command during diag reset */
2791         spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2792         if (ioc->ioc_reset_in_progress) {
2793                 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2794                 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2795                         "%s: busy with host reset\n", ioc->name, __func__));
2796                 return MPT_SCANDV_BUSY;
2797         }
2798         spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2799
2800         mutex_lock(&ioc->internal_cmds.mutex);
2801
2802         /* Set command specific information
2803          */
2804         switch (cmd) {
2805         case INQUIRY:
2806                 cmdLen = 6;
2807                 dir = MPI_SCSIIO_CONTROL_READ;
2808                 CDB[0] = cmd;
2809                 CDB[4] = io->size;
2810                 timeout = 10;
2811                 break;
2812
2813         case TEST_UNIT_READY:
2814                 cmdLen = 6;
2815                 dir = MPI_SCSIIO_CONTROL_READ;
2816                 timeout = 10;
2817                 break;
2818
2819         case START_STOP:
2820                 cmdLen = 6;
2821                 dir = MPI_SCSIIO_CONTROL_READ;
2822                 CDB[0] = cmd;
2823                 CDB[4] = 1;     /*Spin up the disk */
2824                 timeout = 15;
2825                 break;
2826
2827         case REQUEST_SENSE:
2828                 cmdLen = 6;
2829                 CDB[0] = cmd;
2830                 CDB[4] = io->size;
2831                 dir = MPI_SCSIIO_CONTROL_READ;
2832                 timeout = 10;
2833                 break;
2834
2835         case READ_BUFFER:
2836                 cmdLen = 10;
2837                 dir = MPI_SCSIIO_CONTROL_READ;
2838                 CDB[0] = cmd;
2839                 if (io->flags & MPT_ICFLAG_ECHO) {
2840                         CDB[1] = 0x0A;
2841                 } else {
2842                         CDB[1] = 0x02;
2843                 }
2844
2845                 if (io->flags & MPT_ICFLAG_BUF_CAP) {
2846                         CDB[1] |= 0x01;
2847                 }
2848                 CDB[6] = (io->size >> 16) & 0xFF;
2849                 CDB[7] = (io->size >>  8) & 0xFF;
2850                 CDB[8] = io->size & 0xFF;
2851                 timeout = 10;
2852                 break;
2853
2854         case WRITE_BUFFER:
2855                 cmdLen = 10;
2856                 dir = MPI_SCSIIO_CONTROL_WRITE;
2857                 CDB[0] = cmd;
2858                 if (io->flags & MPT_ICFLAG_ECHO) {
2859                         CDB[1] = 0x0A;
2860                 } else {
2861                         CDB[1] = 0x02;
2862                 }
2863                 CDB[6] = (io->size >> 16) & 0xFF;
2864                 CDB[7] = (io->size >>  8) & 0xFF;
2865                 CDB[8] = io->size & 0xFF;
2866                 timeout = 10;
2867                 break;
2868
2869         case RESERVE:
2870                 cmdLen = 6;
2871                 dir = MPI_SCSIIO_CONTROL_READ;
2872                 CDB[0] = cmd;
2873                 timeout = 10;
2874                 break;
2875
2876         case RELEASE:
2877                 cmdLen = 6;
2878                 dir = MPI_SCSIIO_CONTROL_READ;
2879                 CDB[0] = cmd;
2880                 timeout = 10;
2881                 break;
2882
2883         case SYNCHRONIZE_CACHE:
2884                 cmdLen = 10;
2885                 dir = MPI_SCSIIO_CONTROL_READ;
2886                 CDB[0] = cmd;
2887 //              CDB[1] = 0x02;  /* set immediate bit */
2888                 timeout = 10;
2889                 break;
2890
2891         default:
2892                 /* Error Case */
2893                 ret = -EFAULT;
2894                 goto out;
2895         }
2896
2897         /* Get and Populate a free Frame
2898          * MsgContext set in mpt_get_msg_frame call
2899          */
2900         if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
2901                 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n",
2902                     ioc->name, __func__));
2903                 ret = MPT_SCANDV_BUSY;
2904                 goto out;
2905         }
2906
2907         pScsiReq = (SCSIIORequest_t *) mf;
2908
2909         /* Get the request index */
2910         my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
2911         ADD_INDEX_LOG(my_idx); /* for debug */
2912
2913         if (io->flags & MPT_ICFLAG_PHYS_DISK) {
2914                 pScsiReq->TargetID = io->physDiskNum;
2915                 pScsiReq->Bus = 0;
2916                 pScsiReq->ChainOffset = 0;
2917                 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
2918         } else {
2919                 pScsiReq->TargetID = io->id;
2920                 pScsiReq->Bus = io->channel;
2921                 pScsiReq->ChainOffset = 0;
2922                 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
2923         }
2924
2925         pScsiReq->CDBLength = cmdLen;
2926         pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
2927
2928         pScsiReq->Reserved = 0;
2929
2930         pScsiReq->MsgFlags = mpt_msg_flags(ioc);
2931         /* MsgContext set in mpt_get_msg_fram call  */
2932
2933         int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
2934
2935         if (io->flags & MPT_ICFLAG_TAGGED_CMD)
2936                 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ);
2937         else
2938                 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
2939
2940         if (cmd == REQUEST_SENSE) {
2941                 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
2942                 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2943                     "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd));
2944         }
2945
2946         for (ii = 0; ii < 16; ii++)
2947                 pScsiReq->CDB[ii] = CDB[ii];
2948
2949         pScsiReq->DataLength = cpu_to_le32(io->size);
2950         pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
2951                                            + (my_idx * MPT_SENSE_BUFFER_ALLOC));
2952
2953         devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2954             "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%llu\n",
2955             ioc->name, __func__, cmd, io->channel, io->id, io->lun));
2956
2957         if (dir == MPI_SCSIIO_CONTROL_READ)
2958                 ioc->add_sge((char *) &pScsiReq->SGL,
2959                     MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma);
2960         else
2961                 ioc->add_sge((char *) &pScsiReq->SGL,
2962                     MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma);
2963
2964         INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
2965         mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
2966         timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done,
2967             timeout*HZ);
2968         if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
2969                 ret = MPT_SCANDV_DID_RESET;
2970                 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2971                     "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__,
2972                     cmd));
2973                 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
2974                         mpt_free_msg_frame(ioc, mf);
2975                         goto out;
2976                 }
2977                 if (!timeleft) {
2978                         printk(MYIOC_s_WARN_FMT
2979                                "Issuing Reset from %s!! doorbell=0x%08xh"
2980                                " cmd=0x%02x\n",
2981                                ioc->name, __func__, mpt_GetIocState(ioc, 0),
2982                                cmd);
2983                         mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
2984                         mpt_free_msg_frame(ioc, mf);
2985                 }
2986                 goto out;
2987         }
2988
2989         ret = ioc->internal_cmds.completion_code;
2990         devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n",
2991                         ioc->name, __func__, ret));
2992
2993  out:
2994         CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
2995         mutex_unlock(&ioc->internal_cmds.mutex);
2996         return ret;
2997 }
2998
2999 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3000 /**
3001  *      mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
3002  *      @hd: Pointer to a SCSI HOST structure
3003  *      @vdevice: virtual target device
3004  *
3005  *      Uses the ISR, but with special processing.
3006  *      MUST be single-threaded.
3007  *
3008  */
3009 static void
3010 mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
3011 {
3012         INTERNAL_CMD             iocmd;
3013
3014         /* Ignore hidden raid components, this is handled when the command
3015          * is sent to the volume
3016          */
3017         if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
3018                 return;
3019
3020         if (vdevice->vtarget->type != TYPE_DISK || vdevice->vtarget->deleted ||
3021             !vdevice->configured_lun)
3022                 return;
3023
3024         /* Following parameters will not change
3025          * in this routine.
3026          */
3027         iocmd.cmd = SYNCHRONIZE_CACHE;
3028         iocmd.flags = 0;
3029         iocmd.physDiskNum = -1;
3030         iocmd.data = NULL;
3031         iocmd.data_dma = -1;
3032         iocmd.size = 0;
3033         iocmd.rsvd = iocmd.rsvd2 = 0;
3034         iocmd.channel = vdevice->vtarget->channel;
3035         iocmd.id = vdevice->vtarget->id;
3036         iocmd.lun = vdevice->lun;
3037
3038         mptscsih_do_cmd(hd, &iocmd);
3039 }
3040
3041 static ssize_t
3042 mptscsih_version_fw_show(struct device *dev, struct device_attribute *attr,
3043                          char *buf)
3044 {
3045         struct Scsi_Host *host = class_to_shost(dev);
3046         MPT_SCSI_HOST   *hd = shost_priv(host);
3047         MPT_ADAPTER *ioc = hd->ioc;
3048
3049         return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
3050             (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
3051             (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
3052             (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
3053             ioc->facts.FWVersion.Word & 0x000000FF);
3054 }
3055 static DEVICE_ATTR(version_fw, S_IRUGO, mptscsih_version_fw_show, NULL);
3056
3057 static ssize_t
3058 mptscsih_version_bios_show(struct device *dev, struct device_attribute *attr,
3059                            char *buf)
3060 {
3061         struct Scsi_Host *host = class_to_shost(dev);
3062         MPT_SCSI_HOST   *hd = shost_priv(host);
3063         MPT_ADAPTER *ioc = hd->ioc;
3064
3065         return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
3066             (ioc->biosVersion & 0xFF000000) >> 24,
3067             (ioc->biosVersion & 0x00FF0000) >> 16,
3068             (ioc->biosVersion & 0x0000FF00) >> 8,
3069             ioc->biosVersion & 0x000000FF);
3070 }
3071 static DEVICE_ATTR(version_bios, S_IRUGO, mptscsih_version_bios_show, NULL);
3072
3073 static ssize_t
3074 mptscsih_version_mpi_show(struct device *dev, struct device_attribute *attr,
3075                           char *buf)
3076 {
3077         struct Scsi_Host *host = class_to_shost(dev);
3078         MPT_SCSI_HOST   *hd = shost_priv(host);
3079         MPT_ADAPTER *ioc = hd->ioc;
3080
3081         return snprintf(buf, PAGE_SIZE, "%03x\n", ioc->facts.MsgVersion);
3082 }
3083 static DEVICE_ATTR(version_mpi, S_IRUGO, mptscsih_version_mpi_show, NULL);
3084
3085 static ssize_t
3086 mptscsih_version_product_show(struct device *dev,
3087                               struct device_attribute *attr,
3088 char *buf)
3089 {
3090         struct Scsi_Host *host = class_to_shost(dev);
3091         MPT_SCSI_HOST   *hd = shost_priv(host);
3092         MPT_ADAPTER *ioc = hd->ioc;
3093
3094         return snprintf(buf, PAGE_SIZE, "%s\n", ioc->prod_name);
3095 }
3096 static DEVICE_ATTR(version_product, S_IRUGO,
3097     mptscsih_version_product_show, NULL);
3098
3099 static ssize_t
3100 mptscsih_version_nvdata_persistent_show(struct device *dev,
3101                                         struct device_attribute *attr,
3102                                         char *buf)
3103 {
3104         struct Scsi_Host *host = class_to_shost(dev);
3105         MPT_SCSI_HOST   *hd = shost_priv(host);
3106         MPT_ADAPTER *ioc = hd->ioc;
3107
3108         return snprintf(buf, PAGE_SIZE, "%02xh\n",
3109             ioc->nvdata_version_persistent);
3110 }
3111 static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
3112     mptscsih_version_nvdata_persistent_show, NULL);
3113
3114 static ssize_t
3115 mptscsih_version_nvdata_default_show(struct device *dev,
3116                                      struct device_attribute *attr, char *buf)
3117 {
3118         struct Scsi_Host *host = class_to_shost(dev);
3119         MPT_SCSI_HOST   *hd = shost_priv(host);
3120         MPT_ADAPTER *ioc = hd->ioc;
3121
3122         return snprintf(buf, PAGE_SIZE, "%02xh\n",ioc->nvdata_version_default);
3123 }
3124 static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
3125     mptscsih_version_nvdata_default_show, NULL);
3126
3127 static ssize_t
3128 mptscsih_board_name_show(struct device *dev, struct device_attribute *attr,
3129                          char *buf)
3130 {
3131         struct Scsi_Host *host = class_to_shost(dev);
3132         MPT_SCSI_HOST   *hd = shost_priv(host);
3133         MPT_ADAPTER *ioc = hd->ioc;
3134
3135         return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_name);
3136 }
3137 static DEVICE_ATTR(board_name, S_IRUGO, mptscsih_board_name_show, NULL);
3138
3139 static ssize_t
3140 mptscsih_board_assembly_show(struct device *dev,
3141                              struct device_attribute *attr, char *buf)
3142 {
3143         struct Scsi_Host *host = class_to_shost(dev);
3144         MPT_SCSI_HOST   *hd = shost_priv(host);
3145         MPT_ADAPTER *ioc = hd->ioc;
3146
3147         return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_assembly);
3148 }
3149 static DEVICE_ATTR(board_assembly, S_IRUGO,
3150     mptscsih_board_assembly_show, NULL);
3151
3152 static ssize_t
3153 mptscsih_board_tracer_show(struct device *dev, struct device_attribute *attr,
3154                            char *buf)
3155 {
3156         struct Scsi_Host *host = class_to_shost(dev);
3157         MPT_SCSI_HOST   *hd = shost_priv(host);
3158         MPT_ADAPTER *ioc = hd->ioc;
3159
3160         return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_tracer);
3161 }
3162 static DEVICE_ATTR(board_tracer, S_IRUGO,
3163     mptscsih_board_tracer_show, NULL);
3164
3165 static ssize_t
3166 mptscsih_io_delay_show(struct device *dev, struct device_attribute *attr,
3167                        char *buf)
3168 {
3169         struct Scsi_Host *host = class_to_shost(dev);
3170         MPT_SCSI_HOST   *hd = shost_priv(host);
3171         MPT_ADAPTER *ioc = hd->ioc;
3172
3173         return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
3174 }
3175 static DEVICE_ATTR(io_delay, S_IRUGO,
3176     mptscsih_io_delay_show, NULL);
3177
3178 static ssize_t
3179 mptscsih_device_delay_show(struct device *dev, struct device_attribute *attr,
3180                            char *buf)
3181 {
3182         struct Scsi_Host *host = class_to_shost(dev);
3183         MPT_SCSI_HOST   *hd = shost_priv(host);
3184         MPT_ADAPTER *ioc = hd->ioc;
3185
3186         return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
3187 }
3188 static DEVICE_ATTR(device_delay, S_IRUGO,
3189     mptscsih_device_delay_show, NULL);
3190
3191 static ssize_t
3192 mptscsih_debug_level_show(struct device *dev, struct device_attribute *attr,
3193                           char *buf)
3194 {
3195         struct Scsi_Host *host = class_to_shost(dev);
3196         MPT_SCSI_HOST   *hd = shost_priv(host);
3197         MPT_ADAPTER *ioc = hd->ioc;
3198
3199         return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->debug_level);
3200 }
3201 static ssize_t
3202 mptscsih_debug_level_store(struct device *dev, struct device_attribute *attr,
3203                            const char *buf, size_t count)
3204 {
3205         struct Scsi_Host *host = class_to_shost(dev);
3206         MPT_SCSI_HOST   *hd = shost_priv(host);
3207         MPT_ADAPTER *ioc = hd->ioc;
3208         int val = 0;
3209
3210         if (sscanf(buf, "%x", &val) != 1)
3211                 return -EINVAL;
3212
3213         ioc->debug_level = val;
3214         printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n",
3215                                 ioc->name, ioc->debug_level);
3216         return strlen(buf);
3217 }
3218 static DEVICE_ATTR(debug_level, S_IRUGO | S_IWUSR,
3219         mptscsih_debug_level_show, mptscsih_debug_level_store);
3220
3221 struct device_attribute *mptscsih_host_attrs[] = {
3222         &dev_attr_version_fw,
3223         &dev_attr_version_bios,
3224         &dev_attr_version_mpi,
3225         &dev_attr_version_product,
3226         &dev_attr_version_nvdata_persistent,
3227         &dev_attr_version_nvdata_default,
3228         &dev_attr_board_name,
3229         &dev_attr_board_assembly,
3230         &dev_attr_board_tracer,
3231         &dev_attr_io_delay,
3232         &dev_attr_device_delay,
3233         &dev_attr_debug_level,
3234         NULL,
3235 };
3236
3237 EXPORT_SYMBOL(mptscsih_host_attrs);
3238
3239 EXPORT_SYMBOL(mptscsih_remove);
3240 EXPORT_SYMBOL(mptscsih_shutdown);
3241 #ifdef CONFIG_PM
3242 EXPORT_SYMBOL(mptscsih_suspend);
3243 EXPORT_SYMBOL(mptscsih_resume);
3244 #endif
3245 EXPORT_SYMBOL(mptscsih_show_info);
3246 EXPORT_SYMBOL(mptscsih_info);
3247 EXPORT_SYMBOL(mptscsih_qcmd);
3248 EXPORT_SYMBOL(mptscsih_slave_destroy);
3249 EXPORT_SYMBOL(mptscsih_slave_configure);
3250 EXPORT_SYMBOL(mptscsih_abort);
3251 EXPORT_SYMBOL(mptscsih_dev_reset);
3252 EXPORT_SYMBOL(mptscsih_bus_reset);
3253 EXPORT_SYMBOL(mptscsih_host_reset);
3254 EXPORT_SYMBOL(mptscsih_bios_param);
3255 EXPORT_SYMBOL(mptscsih_io_done);
3256 EXPORT_SYMBOL(mptscsih_taskmgmt_complete);
3257 EXPORT_SYMBOL(mptscsih_scandv_complete);
3258 EXPORT_SYMBOL(mptscsih_event_process);
3259 EXPORT_SYMBOL(mptscsih_ioc_reset);
3260 EXPORT_SYMBOL(mptscsih_change_queue_depth);
3261
3262 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/