drivers/media/usb/dvb-usb-v2/ec168.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * E3C EC168 DVB USB driver
   4  *
   5  * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
   6  */
   7
   8 #include "ec168.h"
   9 #include "ec100.h"
  10 #include "mxl5005s.h"
  11
  12 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  13
  14 static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
  15 {
  16         int ret;
  17         unsigned int pipe;
  18         u8 request, requesttype;
  19         u8 *buf;
  20
  21         switch (req->cmd) {
  22         case DOWNLOAD_FIRMWARE:
  23         case GPIO:
  24         case WRITE_I2C:
  25         case STREAMING_CTRL:
  26                 requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
  27                 request = req->cmd;
  28                 break;
  29         case READ_I2C:
  30                 requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
  31                 request = req->cmd;
  32                 break;
  33         case GET_CONFIG:
  34                 requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
  35                 request = CONFIG;
  36                 break;
  37         case SET_CONFIG:
  38                 requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
  39                 request = CONFIG;
  40                 break;
  41         case WRITE_DEMOD:
  42                 requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
  43                 request = DEMOD_RW;
  44                 break;
  45         case READ_DEMOD:
  46                 requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
  47                 request = DEMOD_RW;
  48                 break;
  49         default:
  50                 dev_err(&d->udev->dev, "%s: unknown command=%02x\n",
  51                                 KBUILD_MODNAME, req->cmd);
  52                 ret = -EINVAL;
  53                 goto error;
  54         }
  55
  56         buf = kmalloc(req->size, GFP_KERNEL);
  57         if (!buf) {
  58                 ret = -ENOMEM;
  59                 goto error;
  60         }
  61
  62         if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
  63                 /* write */
  64                 memcpy(buf, req->data, req->size);
  65                 pipe = usb_sndctrlpipe(d->udev, 0);
  66         } else {
  67                 /* read */
  68                 pipe = usb_rcvctrlpipe(d->udev, 0);
  69         }
  70
  71         msleep(1); /* avoid I2C errors */
  72
  73         ret = usb_control_msg(d->udev, pipe, request, requesttype, req->value,
  74                 req->index, buf, req->size, EC168_USB_TIMEOUT);
  75
  76         dvb_usb_dbg_usb_control_msg(d->udev, request, requesttype, req->value,
  77                         req->index, buf, req->size);
  78
  79         if (ret < 0)
  80                 goto err_dealloc;
  81         else
  82                 ret = 0;
  83
  84         /* read request, copy returned data to return buf */
  85         if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
  86                 memcpy(req->data, buf, req->size);
  87
  88         kfree(buf);
  89         return ret;
  90
  91 err_dealloc:
  92         kfree(buf);
  93 error:
  94         dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
  95         return ret;
  96 }
  97
  98 /* I2C */
  99 static struct ec100_config ec168_ec100_config;
 100
 101 static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 102         int num)
 103 {
 104         struct dvb_usb_device *d = i2c_get_adapdata(adap);
 105         struct ec168_req req;
 106         int i = 0;
 107         int ret;
 108
 109         if (num > 2)
 110                 return -EINVAL;
 111
 112         if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 113                 return -EAGAIN;
 114
 115         while (i < num) {
 116                 if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
 117                         if (msg[i].addr == ec168_ec100_config.demod_address) {
 118                                 req.cmd = READ_DEMOD;
 119                                 req.value = 0;
 120                                 req.index = 0xff00 + msg[i].buf[0]; /* reg */
 121                                 req.size = msg[i+1].len; /* bytes to read */
 122                                 req.data = &msg[i+1].buf[0];
 123                                 ret = ec168_ctrl_msg(d, &req);
 124                                 i += 2;
 125                         } else {
 126                                 dev_err(&d->udev->dev, "%s: I2C read not " \
 127                                                 "implemented\n",
 128                                                 KBUILD_MODNAME);
 129                                 ret = -EOPNOTSUPP;
 130                                 i += 2;
 131                         }
 132                 } else {
 133                         if (msg[i].addr == ec168_ec100_config.demod_address) {
 134                                 req.cmd = WRITE_DEMOD;
 135                                 req.value = msg[i].buf[1]; /* val */
 136                                 req.index = 0xff00 + msg[i].buf[0]; /* reg */
 137                                 req.size = 0;
 138                                 req.data = NULL;
 139                                 ret = ec168_ctrl_msg(d, &req);
 140                                 i += 1;
 141                         } else {
 142                                 req.cmd = WRITE_I2C;
 143                                 req.value = msg[i].buf[0]; /* val */
 144                                 req.index = 0x0100 + msg[i].addr; /* I2C addr */
 145                                 req.size = msg[i].len-1;
 146                                 req.data = &msg[i].buf[1];
 147                                 ret = ec168_ctrl_msg(d, &req);
 148                                 i += 1;
 149                         }
 150                 }
 151                 if (ret)
 152                         goto error;
 153
 154         }
 155         ret = i;
 156
 157 error:
 158         mutex_unlock(&d->i2c_mutex);
 159         return ret;
 160 }
 161
 162 static u32 ec168_i2c_func(struct i2c_adapter *adapter)
 163 {
 164         return I2C_FUNC_I2C;
 165 }
 166
 167 static struct i2c_algorithm ec168_i2c_algo = {
 168         .master_xfer   = ec168_i2c_xfer,
 169         .functionality = ec168_i2c_func,
 170 };
 171
 172 /* Callbacks for DVB USB */
 173 static int ec168_identify_state(struct dvb_usb_device *d, const char **name)
 174 {
 175         int ret;
 176         u8 reply;
 177         struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
 178         dev_dbg(&d->udev->dev, "%s:\n", __func__);
 179
 180         ret = ec168_ctrl_msg(d, &req);
 181         if (ret)
 182                 goto error;
 183
 184         dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply);
 185
 186         if (reply == 0x01)
 187                 ret = WARM;
 188         else
 189                 ret = COLD;
 190
 191         return ret;
 192 error:
 193         dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
 194         return ret;
 195 }
 196
 197 static int ec168_download_firmware(struct dvb_usb_device *d,
 198                 const struct firmware *fw)
 199 {
 200         int ret, len, remaining;
 201         struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL};
 202         dev_dbg(&d->udev->dev, "%s:\n", __func__);
 203
 204         #define LEN_MAX 2048 /* max packet size */
 205         for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
 206                 len = remaining;
 207                 if (len > LEN_MAX)
 208                         len = LEN_MAX;
 209
 210                 req.size = len;
 211                 req.data = (u8 *) &fw->data[fw->size - remaining];
 212                 req.index = fw->size - remaining;
 213
 214                 ret = ec168_ctrl_msg(d, &req);
 215                 if (ret) {
 216                         dev_err(&d->udev->dev,
 217                                         "%s: firmware download failed=%d\n",
 218                                         KBUILD_MODNAME, ret);
 219                         goto error;
 220                 }
 221         }
 222
 223         req.size = 0;
 224
 225         /* set "warm"? */
 226         req.cmd = SET_CONFIG;
 227         req.value = 0;
 228         req.index = 0x0001;
 229         ret = ec168_ctrl_msg(d, &req);
 230         if (ret)
 231                 goto error;
 232
 233         /* really needed - no idea what does */
 234         req.cmd = GPIO;
 235         req.value = 0;
 236         req.index = 0x0206;
 237         ret = ec168_ctrl_msg(d, &req);
 238         if (ret)
 239                 goto error;
 240
 241         /* activate tuner I2C? */
 242         req.cmd = WRITE_I2C;
 243         req.value = 0;
 244         req.index = 0x00c6;
 245         ret = ec168_ctrl_msg(d, &req);
 246         if (ret)
 247                 goto error;
 248
 249         return ret;
 250 error:
 251         dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
 252         return ret;
 253 }
 254
 255 static struct ec100_config ec168_ec100_config = {
 256         .demod_address = 0xff, /* not real address, demod is integrated */
 257 };
 258
 259 static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
 260 {
 261         struct dvb_usb_device *d = adap_to_d(adap);
 262         dev_dbg(&d->udev->dev, "%s:\n", __func__);
 263
 264         adap->fe[0] = dvb_attach(ec100_attach, &ec168_ec100_config,
 265                         &d->i2c_adap);
 266         if (adap->fe[0] == NULL)
 267                 return -ENODEV;
 268
 269         return 0;
 270 }
 271
 272 static struct mxl5005s_config ec168_mxl5003s_config = {
 273         .i2c_address     = 0xc6,
 274         .if_freq         = IF_FREQ_4570000HZ,
 275         .xtal_freq       = CRYSTAL_FREQ_16000000HZ,
 276         .agc_mode        = MXL_SINGLE_AGC,
 277         .tracking_filter = MXL_TF_OFF,
 278         .rssi_enable     = MXL_RSSI_ENABLE,
 279         .cap_select      = MXL_CAP_SEL_ENABLE,
 280         .div_out         = MXL_DIV_OUT_4,
 281         .clock_out       = MXL_CLOCK_OUT_DISABLE,
 282         .output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
 283         .top             = MXL5005S_TOP_25P2,
 284         .mod_mode        = MXL_DIGITAL_MODE,
 285         .if_mode         = MXL_ZERO_IF,
 286         .AgcMasterByte   = 0x00,
 287 };
 288
 289 static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
 290 {
 291         struct dvb_usb_device *d = adap_to_d(adap);
 292         dev_dbg(&d->udev->dev, "%s:\n", __func__);
 293
 294         return dvb_attach(mxl5005s_attach, adap->fe[0], &d->i2c_adap,
 295                         &ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
 296 }
 297
 298 static int ec168_streaming_ctrl(struct dvb_frontend *fe, int onoff)
 299 {
 300         struct dvb_usb_device *d = fe_to_d(fe);
 301         struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
 302         dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
 303
 304         if (onoff)
 305                 req.index = 0x0102;
 306         return ec168_ctrl_msg(d, &req);
 307 }
 308
 309 /* DVB USB Driver stuff */
 310 /* bInterfaceNumber 0 is HID
 311  * bInterfaceNumber 1 is DVB-T */
 312 static struct dvb_usb_device_properties ec168_props = {
 313         .driver_name = KBUILD_MODNAME,
 314         .owner = THIS_MODULE,
 315         .adapter_nr = adapter_nr,
 316         .bInterfaceNumber = 1,
 317
 318         .identify_state = ec168_identify_state,
 319         .firmware = EC168_FIRMWARE,
 320         .download_firmware = ec168_download_firmware,
 321
 322         .i2c_algo = &ec168_i2c_algo,
 323         .frontend_attach = ec168_ec100_frontend_attach,
 324         .tuner_attach = ec168_mxl5003s_tuner_attach,
 325         .streaming_ctrl = ec168_streaming_ctrl,
 326
 327         .num_adapters = 1,
 328         .adapter = {
 329                 {
 330                         .stream = DVB_USB_STREAM_BULK(0x82, 6, 32 * 512),
 331                 }
 332         },
 333 };
 334
 335 static const struct dvb_usb_driver_info ec168_driver_info = {
 336         .name = "E3C EC168 reference design",
 337         .props = &ec168_props,
 338 };
 339
 340 static const struct usb_device_id ec168_id[] = {
 341         { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168),
 342                 .driver_info = (kernel_ulong_t) &ec168_driver_info },
 343         { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2),
 344                 .driver_info = (kernel_ulong_t) &ec168_driver_info },
 345         { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3),
 346                 .driver_info = (kernel_ulong_t) &ec168_driver_info },
 347         { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4),
 348                 .driver_info = (kernel_ulong_t) &ec168_driver_info },
 349         { USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5),
 350                 .driver_info = (kernel_ulong_t) &ec168_driver_info },
 351         {}
 352 };
 353 MODULE_DEVICE_TABLE(usb, ec168_id);
 354
 355 static struct usb_driver ec168_driver = {
 356         .name = KBUILD_MODNAME,
 357         .id_table = ec168_id,
 358         .probe = dvb_usbv2_probe,
 359         .disconnect = dvb_usbv2_disconnect,
 360         .suspend = dvb_usbv2_suspend,
 361         .resume = dvb_usbv2_resume,
 362         .no_dynamic_id = 1,
 363         .soft_unbind = 1,
 364 };
 365
 366 module_usb_driver(ec168_driver);
 367
 368 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
 369 MODULE_DESCRIPTION("E3C EC168 driver");
 370 MODULE_LICENSE("GPL");
 371 /*(DEBLOBBED)*/