Linux-libre 5.3.12-gnu
[librecmc/linux-libre.git] / drivers / media / spi / cxd2880-spi.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * cxd2880-spi.c
4  * Sony CXD2880 DVB-T2/T tuner + demodulator driver
5  * SPI adapter
6  *
7  * Copyright (C) 2016, 2017, 2018 Sony Semiconductor Solutions Corporation
8  */
9
10 #define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__
11
12 #include <linux/spi/spi.h>
13 #include <linux/regulator/consumer.h>
14 #include <linux/ktime.h>
15
16 #include <media/dvb_demux.h>
17 #include <media/dmxdev.h>
18 #include <media/dvb_frontend.h>
19 #include "cxd2880.h"
20
21 #define CXD2880_MAX_FILTER_SIZE 32
22 #define BURST_WRITE_MAX 128
23 #define MAX_TRANS_PKT 300
24
25 struct cxd2880_ts_buf_info {
26         u8 read_ready:1;
27         u8 almost_full:1;
28         u8 almost_empty:1;
29         u8 overflow:1;
30         u8 underflow:1;
31         u16 pkt_num;
32 };
33
34 struct cxd2880_pid_config {
35         u8 is_enable;
36         u16 pid;
37 };
38
39 struct cxd2880_pid_filter_config {
40         u8 is_negative;
41         struct cxd2880_pid_config pid_config[CXD2880_MAX_FILTER_SIZE];
42 };
43
44 struct cxd2880_dvb_spi {
45         struct dvb_frontend dvb_fe;
46         struct dvb_adapter adapter;
47         struct dvb_demux demux;
48         struct dmxdev dmxdev;
49         struct dmx_frontend dmx_fe;
50         struct task_struct *cxd2880_ts_read_thread;
51         struct spi_device *spi;
52         struct mutex spi_mutex; /* For SPI access exclusive control */
53         int feed_count;
54         int all_pid_feed_count;
55         struct regulator *vcc_supply;
56         u8 *ts_buf;
57         struct cxd2880_pid_filter_config filter_config;
58 };
59
60 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
61
62 static int cxd2880_write_spi(struct spi_device *spi, u8 *data, u32 size)
63 {
64         struct spi_message msg;
65         struct spi_transfer tx = {};
66
67         if (!spi || !data) {
68                 pr_err("invalid arg\n");
69                 return -EINVAL;
70         }
71
72         tx.tx_buf = data;
73         tx.len = size;
74
75         spi_message_init(&msg);
76         spi_message_add_tail(&tx, &msg);
77
78         return spi_sync(spi, &msg);
79 }
80
81 static int cxd2880_write_reg(struct spi_device *spi,
82                              u8 sub_address, const u8 *data, u32 size)
83 {
84         u8 send_data[BURST_WRITE_MAX + 4];
85         const u8 *write_data_top = NULL;
86         int ret = 0;
87
88         if (!spi || !data) {
89                 pr_err("invalid arg\n");
90                 return -EINVAL;
91         }
92         if (size > BURST_WRITE_MAX || size > U8_MAX) {
93                 pr_err("data size > WRITE_MAX\n");
94                 return -EINVAL;
95         }
96
97         if (sub_address + size > 0x100) {
98                 pr_err("out of range\n");
99                 return -EINVAL;
100         }
101
102         send_data[0] = 0x0e;
103         write_data_top = data;
104
105         send_data[1] = sub_address;
106         send_data[2] = (u8)size;
107
108         memcpy(&send_data[3], write_data_top, send_data[2]);
109
110         ret = cxd2880_write_spi(spi, send_data, send_data[2] + 3);
111         if (ret)
112                 pr_err("write spi failed %d\n", ret);
113
114         return ret;
115 }
116
117 static int cxd2880_spi_read_ts(struct spi_device *spi,
118                                u8 *read_data,
119                                u32 packet_num)
120 {
121         int ret;
122         u8 data[3];
123         struct spi_message message;
124         struct spi_transfer transfer[2] = {};
125
126         if (!spi || !read_data || !packet_num) {
127                 pr_err("invalid arg\n");
128                 return -EINVAL;
129         }
130         if (packet_num > 0xffff) {
131                 pr_err("packet num > 0xffff\n");
132                 return -EINVAL;
133         }
134
135         data[0] = 0x10;
136         data[1] = packet_num >> 8;
137         data[2] = packet_num;
138
139         spi_message_init(&message);
140
141         transfer[0].len = 3;
142         transfer[0].tx_buf = data;
143         spi_message_add_tail(&transfer[0], &message);
144         transfer[1].len = packet_num * 188;
145         transfer[1].rx_buf = read_data;
146         spi_message_add_tail(&transfer[1], &message);
147
148         ret = spi_sync(spi, &message);
149         if (ret)
150                 pr_err("spi_write_then_read failed\n");
151
152         return ret;
153 }
154
155 static int cxd2880_spi_read_ts_buffer_info(struct spi_device *spi,
156                                            struct cxd2880_ts_buf_info *info)
157 {
158         u8 send_data = 0x20;
159         u8 recv_data[2];
160         int ret;
161
162         if (!spi || !info) {
163                 pr_err("invalid arg\n");
164                 return -EINVAL;
165         }
166
167         ret = spi_write_then_read(spi, &send_data, 1,
168                                   recv_data, sizeof(recv_data));
169         if (ret)
170                 pr_err("spi_write_then_read failed\n");
171
172         info->read_ready = (recv_data[0] & 0x80) ? 1 : 0;
173         info->almost_full = (recv_data[0] & 0x40) ? 1 : 0;
174         info->almost_empty = (recv_data[0] & 0x20) ? 1 : 0;
175         info->overflow = (recv_data[0] & 0x10) ? 1 : 0;
176         info->underflow = (recv_data[0] & 0x08) ? 1 : 0;
177         info->pkt_num = ((recv_data[0] & 0x07) << 8) | recv_data[1];
178
179         return ret;
180 }
181
182 static int cxd2880_spi_clear_ts_buffer(struct spi_device *spi)
183 {
184         u8 data = 0x03;
185         int ret;
186
187         ret = cxd2880_write_spi(spi, &data, 1);
188
189         if (ret)
190                 pr_err("write spi failed\n");
191
192         return ret;
193 }
194
195 static int cxd2880_set_pid_filter(struct spi_device *spi,
196                                   struct cxd2880_pid_filter_config *cfg)
197 {
198         u8 data[65];
199         int i;
200         u16 pid = 0;
201         int ret;
202
203         if (!spi) {
204                 pr_err("invalid arg\n");
205                 return -EINVAL;
206         }
207
208         data[0] = 0x00;
209         ret = cxd2880_write_reg(spi, 0x00, &data[0], 1);
210         if (ret)
211                 return ret;
212         if (!cfg) {
213                 data[0] = 0x02;
214                 ret = cxd2880_write_reg(spi, 0x50, &data[0], 1);
215         } else {
216                 data[0] = cfg->is_negative ? 0x01 : 0x00;
217
218                 for (i = 0; i < CXD2880_MAX_FILTER_SIZE; i++) {
219                         pid = cfg->pid_config[i].pid;
220                         if (cfg->pid_config[i].is_enable) {
221                                 data[1 + (i * 2)] = (pid >> 8) | 0x20;
222                                 data[2 + (i * 2)] = pid & 0xff;
223                         } else {
224                                 data[1 + (i * 2)] = 0x00;
225                                 data[2 + (i * 2)] = 0x00;
226                         }
227                 }
228                 ret = cxd2880_write_reg(spi, 0x50, data, 65);
229         }
230
231         return ret;
232 }
233
234 static int cxd2880_update_pid_filter(struct cxd2880_dvb_spi *dvb_spi,
235                                      struct cxd2880_pid_filter_config *cfg,
236                                      bool is_all_pid_filter)
237 {
238         int ret;
239
240         if (!dvb_spi || !cfg) {
241                 pr_err("invalid arg.\n");
242                 return -EINVAL;
243         }
244
245         mutex_lock(&dvb_spi->spi_mutex);
246         if (is_all_pid_filter) {
247                 struct cxd2880_pid_filter_config tmpcfg;
248
249                 memset(&tmpcfg, 0, sizeof(tmpcfg));
250                 tmpcfg.is_negative = 1;
251                 tmpcfg.pid_config[0].is_enable = 1;
252                 tmpcfg.pid_config[0].pid = 0x1fff;
253
254                 ret = cxd2880_set_pid_filter(dvb_spi->spi, &tmpcfg);
255         } else {
256                 ret = cxd2880_set_pid_filter(dvb_spi->spi, cfg);
257         }
258         mutex_unlock(&dvb_spi->spi_mutex);
259
260         if (ret)
261                 pr_err("set_pid_filter failed\n");
262
263         return ret;
264 }
265
266 static int cxd2880_ts_read(void *arg)
267 {
268         struct cxd2880_dvb_spi *dvb_spi = NULL;
269         struct cxd2880_ts_buf_info info;
270         ktime_t start;
271         u32 i;
272         int ret;
273
274         dvb_spi = arg;
275         if (!dvb_spi) {
276                 pr_err("invalid arg\n");
277                 return -EINVAL;
278         }
279
280         ret = cxd2880_spi_clear_ts_buffer(dvb_spi->spi);
281         if (ret) {
282                 pr_err("set_clear_ts_buffer failed\n");
283                 return ret;
284         }
285
286         start = ktime_get();
287         while (!kthread_should_stop()) {
288                 ret = cxd2880_spi_read_ts_buffer_info(dvb_spi->spi,
289                                                       &info);
290                 if (ret) {
291                         pr_err("spi_read_ts_buffer_info error\n");
292                         return ret;
293                 }
294
295                 if (info.pkt_num > MAX_TRANS_PKT) {
296                         for (i = 0; i < info.pkt_num / MAX_TRANS_PKT; i++) {
297                                 cxd2880_spi_read_ts(dvb_spi->spi,
298                                                     dvb_spi->ts_buf,
299                                                     MAX_TRANS_PKT);
300                                 dvb_dmx_swfilter(&dvb_spi->demux,
301                                                  dvb_spi->ts_buf,
302                                                  MAX_TRANS_PKT * 188);
303                         }
304                         start = ktime_get();
305                 } else if ((info.pkt_num > 0) &&
306                            (ktime_to_ms(ktime_sub(ktime_get(), start)) >= 500)) {
307                         cxd2880_spi_read_ts(dvb_spi->spi,
308                                             dvb_spi->ts_buf,
309                                             info.pkt_num);
310                         dvb_dmx_swfilter(&dvb_spi->demux,
311                                          dvb_spi->ts_buf,
312                                          info.pkt_num * 188);
313                         start = ktime_get();
314                 } else {
315                         usleep_range(10000, 11000);
316                 }
317         }
318
319         return 0;
320 }
321
322 static int cxd2880_start_feed(struct dvb_demux_feed *feed)
323 {
324         int ret = 0;
325         int i = 0;
326         struct dvb_demux *demux = NULL;
327         struct cxd2880_dvb_spi *dvb_spi = NULL;
328
329         if (!feed) {
330                 pr_err("invalid arg\n");
331                 return -EINVAL;
332         }
333
334         demux = feed->demux;
335         if (!demux) {
336                 pr_err("feed->demux is NULL\n");
337                 return -EINVAL;
338         }
339         dvb_spi = demux->priv;
340
341         if (dvb_spi->feed_count == CXD2880_MAX_FILTER_SIZE) {
342                 pr_err("Exceeded maximum PID count (32).");
343                 pr_err("Selected PID cannot be enabled.\n");
344                 return -EINVAL;
345         }
346
347         if (feed->pid == 0x2000) {
348                 if (dvb_spi->all_pid_feed_count == 0) {
349                         ret = cxd2880_update_pid_filter(dvb_spi,
350                                                         &dvb_spi->filter_config,
351                                                         true);
352                         if (ret) {
353                                 pr_err("update pid filter failed\n");
354                                 return ret;
355                         }
356                 }
357                 dvb_spi->all_pid_feed_count++;
358
359                 pr_debug("all PID feed (count = %d)\n",
360                          dvb_spi->all_pid_feed_count);
361         } else {
362                 struct cxd2880_pid_filter_config cfgtmp;
363
364                 cfgtmp = dvb_spi->filter_config;
365
366                 for (i = 0; i < CXD2880_MAX_FILTER_SIZE; i++) {
367                         if (cfgtmp.pid_config[i].is_enable == 0) {
368                                 cfgtmp.pid_config[i].is_enable = 1;
369                                 cfgtmp.pid_config[i].pid = feed->pid;
370                                 pr_debug("store PID %d to #%d\n",
371                                          feed->pid, i);
372                                 break;
373                         }
374                 }
375                 if (i == CXD2880_MAX_FILTER_SIZE) {
376                         pr_err("PID filter is full.\n");
377                         return -EINVAL;
378                 }
379                 if (!dvb_spi->all_pid_feed_count)
380                         ret = cxd2880_update_pid_filter(dvb_spi,
381                                                         &cfgtmp,
382                                                         false);
383                 if (ret)
384                         return ret;
385
386                 dvb_spi->filter_config = cfgtmp;
387         }
388
389         if (dvb_spi->feed_count == 0) {
390                 dvb_spi->ts_buf =
391                         kmalloc(MAX_TRANS_PKT * 188,
392                                 GFP_KERNEL | GFP_DMA);
393                 if (!dvb_spi->ts_buf) {
394                         pr_err("ts buffer allocate failed\n");
395                         memset(&dvb_spi->filter_config, 0,
396                                sizeof(dvb_spi->filter_config));
397                         dvb_spi->all_pid_feed_count = 0;
398                         return -ENOMEM;
399                 }
400                 dvb_spi->cxd2880_ts_read_thread = kthread_run(cxd2880_ts_read,
401                                                               dvb_spi,
402                                                               "cxd2880_ts_read");
403                 if (IS_ERR(dvb_spi->cxd2880_ts_read_thread)) {
404                         pr_err("kthread_run failed/\n");
405                         kfree(dvb_spi->ts_buf);
406                         dvb_spi->ts_buf = NULL;
407                         memset(&dvb_spi->filter_config, 0,
408                                sizeof(dvb_spi->filter_config));
409                         dvb_spi->all_pid_feed_count = 0;
410                         return PTR_ERR(dvb_spi->cxd2880_ts_read_thread);
411                 }
412         }
413
414         dvb_spi->feed_count++;
415
416         pr_debug("start feed (count %d)\n", dvb_spi->feed_count);
417         return 0;
418 }
419
420 static int cxd2880_stop_feed(struct dvb_demux_feed *feed)
421 {
422         int i = 0;
423         int ret;
424         struct dvb_demux *demux = NULL;
425         struct cxd2880_dvb_spi *dvb_spi = NULL;
426
427         if (!feed) {
428                 pr_err("invalid arg\n");
429                 return -EINVAL;
430         }
431
432         demux = feed->demux;
433         if (!demux) {
434                 pr_err("feed->demux is NULL\n");
435                 return -EINVAL;
436         }
437         dvb_spi = demux->priv;
438
439         if (!dvb_spi->feed_count) {
440                 pr_err("no feed is started\n");
441                 return -EINVAL;
442         }
443
444         if (feed->pid == 0x2000) {
445                 /*
446                  * Special PID case.
447                  * Number of 0x2000 feed request was stored
448                  * in dvb_spi->all_pid_feed_count.
449                  */
450                 if (dvb_spi->all_pid_feed_count <= 0) {
451                         pr_err("PID %d not found.\n", feed->pid);
452                         return -EINVAL;
453                 }
454                 dvb_spi->all_pid_feed_count--;
455         } else {
456                 struct cxd2880_pid_filter_config cfgtmp;
457
458                 cfgtmp = dvb_spi->filter_config;
459
460                 for (i = 0; i < CXD2880_MAX_FILTER_SIZE; i++) {
461                         if (feed->pid == cfgtmp.pid_config[i].pid &&
462                             cfgtmp.pid_config[i].is_enable != 0) {
463                                 cfgtmp.pid_config[i].is_enable = 0;
464                                 cfgtmp.pid_config[i].pid = 0;
465                                 pr_debug("removed PID %d from #%d\n",
466                                          feed->pid, i);
467                                 break;
468                         }
469                 }
470                 dvb_spi->filter_config = cfgtmp;
471
472                 if (i == CXD2880_MAX_FILTER_SIZE) {
473                         pr_err("PID %d not found\n", feed->pid);
474                         return -EINVAL;
475                 }
476         }
477
478         ret = cxd2880_update_pid_filter(dvb_spi,
479                                         &dvb_spi->filter_config,
480                                         dvb_spi->all_pid_feed_count > 0);
481         dvb_spi->feed_count--;
482
483         if (dvb_spi->feed_count == 0) {
484                 int ret_stop = 0;
485
486                 ret_stop = kthread_stop(dvb_spi->cxd2880_ts_read_thread);
487                 if (ret_stop) {
488                         pr_err("'kthread_stop failed. (%d)\n", ret_stop);
489                         ret = ret_stop;
490                 }
491                 kfree(dvb_spi->ts_buf);
492                 dvb_spi->ts_buf = NULL;
493         }
494
495         pr_debug("stop feed ok.(count %d)\n", dvb_spi->feed_count);
496
497         return ret;
498 }
499
500 static const struct of_device_id cxd2880_spi_of_match[] = {
501         { .compatible = "sony,cxd2880" },
502         { /* sentinel */ }
503 };
504
505 MODULE_DEVICE_TABLE(of, cxd2880_spi_of_match);
506
507 static int
508 cxd2880_spi_probe(struct spi_device *spi)
509 {
510         int ret;
511         struct cxd2880_dvb_spi *dvb_spi = NULL;
512         struct cxd2880_config config;
513
514         if (!spi) {
515                 pr_err("invalid arg.\n");
516                 return -EINVAL;
517         }
518
519         dvb_spi = kzalloc(sizeof(struct cxd2880_dvb_spi), GFP_KERNEL);
520         if (!dvb_spi)
521                 return -ENOMEM;
522
523         dvb_spi->vcc_supply = devm_regulator_get_optional(&spi->dev, "vcc");
524         if (IS_ERR(dvb_spi->vcc_supply)) {
525                 if (PTR_ERR(dvb_spi->vcc_supply) == -EPROBE_DEFER) {
526                         ret = -EPROBE_DEFER;
527                         goto fail_adapter;
528                 }
529                 dvb_spi->vcc_supply = NULL;
530         } else {
531                 ret = regulator_enable(dvb_spi->vcc_supply);
532                 if (ret)
533                         goto fail_adapter;
534         }
535
536         dvb_spi->spi = spi;
537         mutex_init(&dvb_spi->spi_mutex);
538         dev_set_drvdata(&spi->dev, dvb_spi);
539         config.spi = spi;
540         config.spi_mutex = &dvb_spi->spi_mutex;
541
542         ret = dvb_register_adapter(&dvb_spi->adapter,
543                                    "CXD2880",
544                                    THIS_MODULE,
545                                    &spi->dev,
546                                    adapter_nr);
547         if (ret < 0) {
548                 pr_err("dvb_register_adapter() failed\n");
549                 goto fail_adapter;
550         }
551
552         if (!dvb_attach(cxd2880_attach, &dvb_spi->dvb_fe, &config)) {
553                 pr_err("cxd2880_attach failed\n");
554                 ret = -ENODEV;
555                 goto fail_attach;
556         }
557
558         ret = dvb_register_frontend(&dvb_spi->adapter,
559                                     &dvb_spi->dvb_fe);
560         if (ret < 0) {
561                 pr_err("dvb_register_frontend() failed\n");
562                 goto fail_frontend;
563         }
564
565         dvb_spi->demux.dmx.capabilities = DMX_TS_FILTERING;
566         dvb_spi->demux.priv = dvb_spi;
567         dvb_spi->demux.filternum = CXD2880_MAX_FILTER_SIZE;
568         dvb_spi->demux.feednum = CXD2880_MAX_FILTER_SIZE;
569         dvb_spi->demux.start_feed = cxd2880_start_feed;
570         dvb_spi->demux.stop_feed = cxd2880_stop_feed;
571
572         ret = dvb_dmx_init(&dvb_spi->demux);
573         if (ret < 0) {
574                 pr_err("dvb_dmx_init() failed\n");
575                 goto fail_dmx;
576         }
577
578         dvb_spi->dmxdev.filternum = CXD2880_MAX_FILTER_SIZE;
579         dvb_spi->dmxdev.demux = &dvb_spi->demux.dmx;
580         dvb_spi->dmxdev.capabilities = 0;
581         ret = dvb_dmxdev_init(&dvb_spi->dmxdev,
582                               &dvb_spi->adapter);
583         if (ret < 0) {
584                 pr_err("dvb_dmxdev_init() failed\n");
585                 goto fail_dmxdev;
586         }
587
588         dvb_spi->dmx_fe.source = DMX_FRONTEND_0;
589         ret = dvb_spi->demux.dmx.add_frontend(&dvb_spi->demux.dmx,
590                                               &dvb_spi->dmx_fe);
591         if (ret < 0) {
592                 pr_err("add_frontend() failed\n");
593                 goto fail_dmx_fe;
594         }
595
596         ret = dvb_spi->demux.dmx.connect_frontend(&dvb_spi->demux.dmx,
597                                                   &dvb_spi->dmx_fe);
598         if (ret < 0) {
599                 pr_err("dvb_register_frontend() failed\n");
600                 goto fail_fe_conn;
601         }
602
603         pr_info("Sony CXD2880 has successfully attached.\n");
604
605         return 0;
606
607 fail_fe_conn:
608         dvb_spi->demux.dmx.remove_frontend(&dvb_spi->demux.dmx,
609                                            &dvb_spi->dmx_fe);
610 fail_dmx_fe:
611         dvb_dmxdev_release(&dvb_spi->dmxdev);
612 fail_dmxdev:
613         dvb_dmx_release(&dvb_spi->demux);
614 fail_dmx:
615         dvb_unregister_frontend(&dvb_spi->dvb_fe);
616 fail_frontend:
617         dvb_frontend_detach(&dvb_spi->dvb_fe);
618 fail_attach:
619         dvb_unregister_adapter(&dvb_spi->adapter);
620 fail_adapter:
621         kfree(dvb_spi);
622         return ret;
623 }
624
625 static int
626 cxd2880_spi_remove(struct spi_device *spi)
627 {
628         struct cxd2880_dvb_spi *dvb_spi;
629
630         if (!spi) {
631                 pr_err("invalid arg\n");
632                 return -EINVAL;
633         }
634
635         dvb_spi = dev_get_drvdata(&spi->dev);
636
637         if (!dvb_spi) {
638                 pr_err("failed\n");
639                 return -EINVAL;
640         }
641         dvb_spi->demux.dmx.remove_frontend(&dvb_spi->demux.dmx,
642                                            &dvb_spi->dmx_fe);
643         dvb_dmxdev_release(&dvb_spi->dmxdev);
644         dvb_dmx_release(&dvb_spi->demux);
645         dvb_unregister_frontend(&dvb_spi->dvb_fe);
646         dvb_frontend_detach(&dvb_spi->dvb_fe);
647         dvb_unregister_adapter(&dvb_spi->adapter);
648
649         if (dvb_spi->vcc_supply)
650                 regulator_disable(dvb_spi->vcc_supply);
651
652         kfree(dvb_spi);
653         pr_info("cxd2880_spi remove ok.\n");
654
655         return 0;
656 }
657
658 static const struct spi_device_id cxd2880_spi_id[] = {
659         { "cxd2880", 0 },
660         { /* sentinel */ }
661 };
662 MODULE_DEVICE_TABLE(spi, cxd2880_spi_id);
663
664 static struct spi_driver cxd2880_spi_driver = {
665         .driver = {
666                 .name   = "cxd2880",
667                 .of_match_table = cxd2880_spi_of_match,
668         },
669         .id_table = cxd2880_spi_id,
670         .probe    = cxd2880_spi_probe,
671         .remove   = cxd2880_spi_remove,
672 };
673 module_spi_driver(cxd2880_spi_driver);
674
675 MODULE_DESCRIPTION("Sony CXD2880 DVB-T2/T tuner + demod driver SPI adapter");
676 MODULE_AUTHOR("Sony Semiconductor Solutions Corporation");
677 MODULE_LICENSE("GPL v2");