drivers/iio/adc/sc27xx_adc.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 // Copyright (C) 2018 Spreadtrum Communications Inc.
   3
   4 #include <linux/hwspinlock.h>
   5 #include <linux/iio/iio.h>
   6 #include <linux/interrupt.h>
   7 #include <linux/module.h>
   8 #include <linux/nvmem-consumer.h>
   9 #include <linux/of.h>
  10 #include <linux/of_device.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/regmap.h>
  13 #include <linux/slab.h>
  14
  15 /* PMIC global registers definition */
  16 #define SC27XX_MODULE_EN                0xc08
  17 #define SC27XX_MODULE_ADC_EN            BIT(5)
  18 #define SC27XX_ARM_CLK_EN               0xc10
  19 #define SC27XX_CLK_ADC_EN               BIT(5)
  20 #define SC27XX_CLK_ADC_CLK_EN           BIT(6)
  21
  22 /* ADC controller registers definition */
  23 #define SC27XX_ADC_CTL                  0x0
  24 #define SC27XX_ADC_CH_CFG               0x4
  25 #define SC27XX_ADC_DATA                 0x4c
  26 #define SC27XX_ADC_INT_EN               0x50
  27 #define SC27XX_ADC_INT_CLR              0x54
  28 #define SC27XX_ADC_INT_STS              0x58
  29 #define SC27XX_ADC_INT_RAW              0x5c
  30
  31 /* Bits and mask definition for SC27XX_ADC_CTL register */
  32 #define SC27XX_ADC_EN                   BIT(0)
  33 #define SC27XX_ADC_CHN_RUN              BIT(1)
  34 #define SC27XX_ADC_12BIT_MODE           BIT(2)
  35 #define SC27XX_ADC_RUN_NUM_MASK         GENMASK(7, 4)
  36 #define SC27XX_ADC_RUN_NUM_SHIFT        4
  37
  38 /* Bits and mask definition for SC27XX_ADC_CH_CFG register */
  39 #define SC27XX_ADC_CHN_ID_MASK          GENMASK(4, 0)
  40 #define SC27XX_ADC_SCALE_MASK           GENMASK(10, 8)
  41 #define SC27XX_ADC_SCALE_SHIFT          8
  42
  43 /* Bits definitions for SC27XX_ADC_INT_EN registers */
  44 #define SC27XX_ADC_IRQ_EN               BIT(0)
  45
  46 /* Bits definitions for SC27XX_ADC_INT_CLR registers */
  47 #define SC27XX_ADC_IRQ_CLR              BIT(0)
  48
  49 /* Mask definition for SC27XX_ADC_DATA register */
  50 #define SC27XX_ADC_DATA_MASK            GENMASK(11, 0)
  51
  52 /* Timeout (ms) for the trylock of hardware spinlocks */
  53 #define SC27XX_ADC_HWLOCK_TIMEOUT       5000
  54
  55 /* Timeout (ms) for ADC data conversion according to ADC datasheet */
  56 #define SC27XX_ADC_RDY_TIMEOUT          100
  57
  58 /* Maximum ADC channel number */
  59 #define SC27XX_ADC_CHANNEL_MAX          32
  60
  61 /* ADC voltage ratio definition */
  62 #define SC27XX_VOLT_RATIO(n, d)         \
  63         (((n) << SC27XX_RATIO_NUMERATOR_OFFSET) | (d))
  64 #define SC27XX_RATIO_NUMERATOR_OFFSET   16
  65 #define SC27XX_RATIO_DENOMINATOR_MASK   GENMASK(15, 0)
  66
  67 struct sc27xx_adc_data {
  68         struct device *dev;
  69         struct regmap *regmap;
  70         /*
  71          * One hardware spinlock to synchronize between the multiple
  72          * subsystems which will access the unique ADC controller.
  73          */
  74         struct hwspinlock *hwlock;
  75         struct completion completion;
  76         int channel_scale[SC27XX_ADC_CHANNEL_MAX];
  77         u32 base;
  78         int value;
  79         int irq;
  80 };
  81
  82 struct sc27xx_adc_linear_graph {
  83         int volt0;
  84         int adc0;
  85         int volt1;
  86         int adc1;
  87 };
  88
  89 /*
  90  * According to the datasheet, we can convert one ADC value to one voltage value
  91  * through 2 points in the linear graph. If the voltage is less than 1.2v, we
  92  * should use the small-scale graph, and if more than 1.2v, we should use the
  93  * big-scale graph.
  94  */
  95 static struct sc27xx_adc_linear_graph big_scale_graph = {
  96         4200, 3310,
  97         3600, 2832,
  98 };
  99
 100 static struct sc27xx_adc_linear_graph small_scale_graph = {
 101         1000, 3413,
 102         100, 341,
 103 };
 104
 105 static const struct sc27xx_adc_linear_graph big_scale_graph_calib = {
 106         4200, 856,
 107         3600, 733,
 108 };
 109
 110 static const struct sc27xx_adc_linear_graph small_scale_graph_calib = {
 111         1000, 833,
 112         100, 80,
 113 };
 114
 115 static int sc27xx_adc_get_calib_data(u32 calib_data, int calib_adc)
 116 {
 117         return ((calib_data & 0xff) + calib_adc - 128) * 4;
 118 }
 119
 120 static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data,
 121                                         bool big_scale)
 122 {
 123         const struct sc27xx_adc_linear_graph *calib_graph;
 124         struct sc27xx_adc_linear_graph *graph;
 125         struct nvmem_cell *cell;
 126         const char *cell_name;
 127         u32 calib_data = 0;
 128         void *buf;
 129         size_t len;
 130
 131         if (big_scale) {
 132                 calib_graph = &big_scale_graph_calib;
 133                 graph = &big_scale_graph;
 134                 cell_name = "big_scale_calib";
 135         } else {
 136                 calib_graph = &small_scale_graph_calib;
 137                 graph = &small_scale_graph;
 138                 cell_name = "small_scale_calib";
 139         }
 140
 141         cell = nvmem_cell_get(data->dev, cell_name);
 142         if (IS_ERR(cell))
 143                 return PTR_ERR(cell);
 144
 145         buf = nvmem_cell_read(cell, &len);
 146         nvmem_cell_put(cell);
 147
 148         if (IS_ERR(buf))
 149                 return PTR_ERR(buf);
 150
 151         memcpy(&calib_data, buf, min(len, sizeof(u32)));
 152
 153         /* Only need to calibrate the adc values in the linear graph. */
 154         graph->adc0 = sc27xx_adc_get_calib_data(calib_data, calib_graph->adc0);
 155         graph->adc1 = sc27xx_adc_get_calib_data(calib_data >> 8,
 156                                                 calib_graph->adc1);
 157
 158         kfree(buf);
 159         return 0;
 160 }
 161
 162 static int sc27xx_adc_get_ratio(int channel, int scale)
 163 {
 164         switch (channel) {
 165         case 1:
 166         case 2:
 167         case 3:
 168         case 4:
 169                 return scale ? SC27XX_VOLT_RATIO(400, 1025) :
 170                         SC27XX_VOLT_RATIO(1, 1);
 171         case 5:
 172                 return SC27XX_VOLT_RATIO(7, 29);
 173         case 6:
 174                 return SC27XX_VOLT_RATIO(375, 9000);
 175         case 7:
 176         case 8:
 177                 return scale ? SC27XX_VOLT_RATIO(100, 125) :
 178                         SC27XX_VOLT_RATIO(1, 1);
 179         case 19:
 180                 return SC27XX_VOLT_RATIO(1, 3);
 181         default:
 182                 return SC27XX_VOLT_RATIO(1, 1);
 183         }
 184         return SC27XX_VOLT_RATIO(1, 1);
 185 }
 186
 187 static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
 188                            int scale, int *val)
 189 {
 190         int ret;
 191         u32 tmp;
 192
 193         reinit_completion(&data->completion);
 194
 195         ret = hwspin_lock_timeout_raw(data->hwlock, SC27XX_ADC_HWLOCK_TIMEOUT);
 196         if (ret) {
 197                 dev_err(data->dev, "timeout to get the hwspinlock\n");
 198                 return ret;
 199         }
 200
 201         ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
 202                                  SC27XX_ADC_EN, SC27XX_ADC_EN);
 203         if (ret)
 204                 goto unlock_adc;
 205
 206         /* Configure the channel id and scale */
 207         tmp = (scale << SC27XX_ADC_SCALE_SHIFT) & SC27XX_ADC_SCALE_MASK;
 208         tmp |= channel & SC27XX_ADC_CHN_ID_MASK;
 209         ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CH_CFG,
 210                                  SC27XX_ADC_CHN_ID_MASK | SC27XX_ADC_SCALE_MASK,
 211                                  tmp);
 212         if (ret)
 213                 goto disable_adc;
 214
 215         /* Select 12bit conversion mode, and only sample 1 time */
 216         tmp = SC27XX_ADC_12BIT_MODE;
 217         tmp |= (0 << SC27XX_ADC_RUN_NUM_SHIFT) & SC27XX_ADC_RUN_NUM_MASK;
 218         ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
 219                                  SC27XX_ADC_RUN_NUM_MASK | SC27XX_ADC_12BIT_MODE,
 220                                  tmp);
 221         if (ret)
 222                 goto disable_adc;
 223
 224         ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
 225                                  SC27XX_ADC_CHN_RUN, SC27XX_ADC_CHN_RUN);
 226         if (ret)
 227                 goto disable_adc;
 228
 229         ret = wait_for_completion_timeout(&data->completion,
 230                                 msecs_to_jiffies(SC27XX_ADC_RDY_TIMEOUT));
 231         if (!ret) {
 232                 dev_err(data->dev, "read ADC data timeout\n");
 233                 ret = -ETIMEDOUT;
 234         } else {
 235                 ret = 0;
 236         }
 237
 238 disable_adc:
 239         regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
 240                            SC27XX_ADC_EN, 0);
 241 unlock_adc:
 242         hwspin_unlock_raw(data->hwlock);
 243
 244         if (!ret)
 245                 *val = data->value;
 246
 247         return ret;
 248 }
 249
 250 static irqreturn_t sc27xx_adc_isr(int irq, void *dev_id)
 251 {
 252         struct sc27xx_adc_data *data = dev_id;
 253         int ret;
 254
 255         ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR,
 256                                  SC27XX_ADC_IRQ_CLR, SC27XX_ADC_IRQ_CLR);
 257         if (ret)
 258                 return IRQ_RETVAL(ret);
 259
 260         ret = regmap_read(data->regmap, data->base + SC27XX_ADC_DATA,
 261                           &data->value);
 262         if (ret)
 263                 return IRQ_RETVAL(ret);
 264
 265         data->value &= SC27XX_ADC_DATA_MASK;
 266         complete(&data->completion);
 267
 268         return IRQ_HANDLED;
 269 }
 270
 271 static void sc27xx_adc_volt_ratio(struct sc27xx_adc_data *data,
 272                                   int channel, int scale,
 273                                   u32 *div_numerator, u32 *div_denominator)
 274 {
 275         u32 ratio = sc27xx_adc_get_ratio(channel, scale);
 276
 277         *div_numerator = ratio >> SC27XX_RATIO_NUMERATOR_OFFSET;
 278         *div_denominator = ratio & SC27XX_RATIO_DENOMINATOR_MASK;
 279 }
 280
 281 static int sc27xx_adc_to_volt(struct sc27xx_adc_linear_graph *graph,
 282                               int raw_adc)
 283 {
 284         int tmp;
 285
 286         tmp = (graph->volt0 - graph->volt1) * (raw_adc - graph->adc1);
 287         tmp /= (graph->adc0 - graph->adc1);
 288         tmp += graph->volt1;
 289
 290         return tmp < 0 ? 0 : tmp;
 291 }
 292
 293 static int sc27xx_adc_convert_volt(struct sc27xx_adc_data *data, int channel,
 294                                    int scale, int raw_adc)
 295 {
 296         u32 numerator, denominator;
 297         u32 volt;
 298
 299         /*
 300          * Convert ADC values to voltage values according to the linear graph,
 301          * and channel 5 and channel 1 has been calibrated, so we can just
 302          * return the voltage values calculated by the linear graph. But other
 303          * channels need be calculated to the real voltage values with the
 304          * voltage ratio.
 305          */
 306         switch (channel) {
 307         case 5:
 308                 return sc27xx_adc_to_volt(&big_scale_graph, raw_adc);
 309
 310         case 1:
 311                 return sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
 312
 313         default:
 314                 volt = sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
 315                 break;
 316         }
 317
 318         sc27xx_adc_volt_ratio(data, channel, scale, &numerator, &denominator);
 319
 320         return (volt * denominator + numerator / 2) / numerator;
 321 }
 322
 323 static int sc27xx_adc_read_processed(struct sc27xx_adc_data *data,
 324                                      int channel, int scale, int *val)
 325 {
 326         int ret, raw_adc;
 327
 328         ret = sc27xx_adc_read(data, channel, scale, &raw_adc);
 329         if (ret)
 330                 return ret;
 331
 332         *val = sc27xx_adc_convert_volt(data, channel, scale, raw_adc);
 333         return 0;
 334 }
 335
 336 static int sc27xx_adc_read_raw(struct iio_dev *indio_dev,
 337                                struct iio_chan_spec const *chan,
 338                                int *val, int *val2, long mask)
 339 {
 340         struct sc27xx_adc_data *data = iio_priv(indio_dev);
 341         int scale = data->channel_scale[chan->channel];
 342         int ret, tmp;
 343
 344         switch (mask) {
 345         case IIO_CHAN_INFO_RAW:
 346                 mutex_lock(&indio_dev->mlock);
 347                 ret = sc27xx_adc_read(data, chan->channel, scale, &tmp);
 348                 mutex_unlock(&indio_dev->mlock);
 349
 350                 if (ret)
 351                         return ret;
 352
 353                 *val = tmp;
 354                 return IIO_VAL_INT;
 355
 356         case IIO_CHAN_INFO_PROCESSED:
 357                 mutex_lock(&indio_dev->mlock);
 358                 ret = sc27xx_adc_read_processed(data, chan->channel, scale,
 359                                                 &tmp);
 360                 mutex_unlock(&indio_dev->mlock);
 361
 362                 if (ret)
 363                         return ret;
 364
 365                 *val = tmp;
 366                 return IIO_VAL_INT;
 367
 368         case IIO_CHAN_INFO_SCALE:
 369                 *val = scale;
 370                 return IIO_VAL_INT;
 371
 372         default:
 373                 return -EINVAL;
 374         }
 375 }
 376
 377 static int sc27xx_adc_write_raw(struct iio_dev *indio_dev,
 378                                 struct iio_chan_spec const *chan,
 379                                 int val, int val2, long mask)
 380 {
 381         struct sc27xx_adc_data *data = iio_priv(indio_dev);
 382
 383         switch (mask) {
 384         case IIO_CHAN_INFO_SCALE:
 385                 data->channel_scale[chan->channel] = val;
 386                 return IIO_VAL_INT;
 387
 388         default:
 389                 return -EINVAL;
 390         }
 391 }
 392
 393 static const struct iio_info sc27xx_info = {
 394         .read_raw = &sc27xx_adc_read_raw,
 395         .write_raw = &sc27xx_adc_write_raw,
 396 };
 397
 398 #define SC27XX_ADC_CHANNEL(index, mask) {                       \
 399         .type = IIO_VOLTAGE,                                    \
 400         .channel = index,                                       \
 401         .info_mask_separate = mask | BIT(IIO_CHAN_INFO_SCALE),  \
 402         .datasheet_name = "CH##index",                          \
 403         .indexed = 1,                                           \
 404 }
 405
 406 static const struct iio_chan_spec sc27xx_channels[] = {
 407         SC27XX_ADC_CHANNEL(0, BIT(IIO_CHAN_INFO_PROCESSED)),
 408         SC27XX_ADC_CHANNEL(1, BIT(IIO_CHAN_INFO_PROCESSED)),
 409         SC27XX_ADC_CHANNEL(2, BIT(IIO_CHAN_INFO_PROCESSED)),
 410         SC27XX_ADC_CHANNEL(3, BIT(IIO_CHAN_INFO_PROCESSED)),
 411         SC27XX_ADC_CHANNEL(4, BIT(IIO_CHAN_INFO_PROCESSED)),
 412         SC27XX_ADC_CHANNEL(5, BIT(IIO_CHAN_INFO_PROCESSED)),
 413         SC27XX_ADC_CHANNEL(6, BIT(IIO_CHAN_INFO_PROCESSED)),
 414         SC27XX_ADC_CHANNEL(7, BIT(IIO_CHAN_INFO_PROCESSED)),
 415         SC27XX_ADC_CHANNEL(8, BIT(IIO_CHAN_INFO_PROCESSED)),
 416         SC27XX_ADC_CHANNEL(9, BIT(IIO_CHAN_INFO_PROCESSED)),
 417         SC27XX_ADC_CHANNEL(10, BIT(IIO_CHAN_INFO_PROCESSED)),
 418         SC27XX_ADC_CHANNEL(11, BIT(IIO_CHAN_INFO_PROCESSED)),
 419         SC27XX_ADC_CHANNEL(12, BIT(IIO_CHAN_INFO_PROCESSED)),
 420         SC27XX_ADC_CHANNEL(13, BIT(IIO_CHAN_INFO_PROCESSED)),
 421         SC27XX_ADC_CHANNEL(14, BIT(IIO_CHAN_INFO_PROCESSED)),
 422         SC27XX_ADC_CHANNEL(15, BIT(IIO_CHAN_INFO_PROCESSED)),
 423         SC27XX_ADC_CHANNEL(16, BIT(IIO_CHAN_INFO_PROCESSED)),
 424         SC27XX_ADC_CHANNEL(17, BIT(IIO_CHAN_INFO_PROCESSED)),
 425         SC27XX_ADC_CHANNEL(18, BIT(IIO_CHAN_INFO_PROCESSED)),
 426         SC27XX_ADC_CHANNEL(19, BIT(IIO_CHAN_INFO_PROCESSED)),
 427         SC27XX_ADC_CHANNEL(20, BIT(IIO_CHAN_INFO_RAW)),
 428         SC27XX_ADC_CHANNEL(21, BIT(IIO_CHAN_INFO_PROCESSED)),
 429         SC27XX_ADC_CHANNEL(22, BIT(IIO_CHAN_INFO_PROCESSED)),
 430         SC27XX_ADC_CHANNEL(23, BIT(IIO_CHAN_INFO_PROCESSED)),
 431         SC27XX_ADC_CHANNEL(24, BIT(IIO_CHAN_INFO_PROCESSED)),
 432         SC27XX_ADC_CHANNEL(25, BIT(IIO_CHAN_INFO_PROCESSED)),
 433         SC27XX_ADC_CHANNEL(26, BIT(IIO_CHAN_INFO_PROCESSED)),
 434         SC27XX_ADC_CHANNEL(27, BIT(IIO_CHAN_INFO_PROCESSED)),
 435         SC27XX_ADC_CHANNEL(28, BIT(IIO_CHAN_INFO_PROCESSED)),
 436         SC27XX_ADC_CHANNEL(29, BIT(IIO_CHAN_INFO_PROCESSED)),
 437         SC27XX_ADC_CHANNEL(30, BIT(IIO_CHAN_INFO_PROCESSED)),
 438         SC27XX_ADC_CHANNEL(31, BIT(IIO_CHAN_INFO_PROCESSED)),
 439 };
 440
 441 static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
 442 {
 443         int ret;
 444
 445         ret = regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
 446                                  SC27XX_MODULE_ADC_EN, SC27XX_MODULE_ADC_EN);
 447         if (ret)
 448                 return ret;
 449
 450         /* Enable ADC work clock and controller clock */
 451         ret = regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
 452                                  SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN,
 453                                  SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
 454         if (ret)
 455                 goto disable_adc;
 456
 457         ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_EN,
 458                                  SC27XX_ADC_IRQ_EN, SC27XX_ADC_IRQ_EN);
 459         if (ret)
 460                 goto disable_clk;
 461
 462         /* ADC channel scales' calibration from nvmem device */
 463         ret = sc27xx_adc_scale_calibration(data, true);
 464         if (ret)
 465                 goto disable_clk;
 466
 467         ret = sc27xx_adc_scale_calibration(data, false);
 468         if (ret)
 469                 goto disable_clk;
 470
 471         return 0;
 472
 473 disable_clk:
 474         regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
 475                            SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
 476 disable_adc:
 477         regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
 478                            SC27XX_MODULE_ADC_EN, 0);
 479
 480         return ret;
 481 }
 482
 483 static void sc27xx_adc_disable(void *_data)
 484 {
 485         struct sc27xx_adc_data *data = _data;
 486
 487         regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_EN,
 488                            SC27XX_ADC_IRQ_EN, 0);
 489
 490         /* Disable ADC work clock and controller clock */
 491         regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
 492                            SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
 493
 494         regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
 495                            SC27XX_MODULE_ADC_EN, 0);
 496 }
 497
 498 static void sc27xx_adc_free_hwlock(void *_data)
 499 {
 500         struct hwspinlock *hwlock = _data;
 501
 502         hwspin_lock_free(hwlock);
 503 }
 504
 505 static int sc27xx_adc_probe(struct platform_device *pdev)
 506 {
 507         struct device_node *np = pdev->dev.of_node;
 508         struct sc27xx_adc_data *sc27xx_data;
 509         struct iio_dev *indio_dev;
 510         int ret;
 511
 512         indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*sc27xx_data));
 513         if (!indio_dev)
 514                 return -ENOMEM;
 515
 516         sc27xx_data = iio_priv(indio_dev);
 517
 518         sc27xx_data->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 519         if (!sc27xx_data->regmap) {
 520                 dev_err(&pdev->dev, "failed to get ADC regmap\n");
 521                 return -ENODEV;
 522         }
 523
 524         ret = of_property_read_u32(np, "reg", &sc27xx_data->base);
 525         if (ret) {
 526                 dev_err(&pdev->dev, "failed to get ADC base address\n");
 527                 return ret;
 528         }
 529
 530         sc27xx_data->irq = platform_get_irq(pdev, 0);
 531         if (sc27xx_data->irq < 0) {
 532                 dev_err(&pdev->dev, "failed to get ADC irq number\n");
 533                 return sc27xx_data->irq;
 534         }
 535
 536         ret = of_hwspin_lock_get_id(np, 0);
 537         if (ret < 0) {
 538                 dev_err(&pdev->dev, "failed to get hwspinlock id\n");
 539                 return ret;
 540         }
 541
 542         sc27xx_data->hwlock = hwspin_lock_request_specific(ret);
 543         if (!sc27xx_data->hwlock) {
 544                 dev_err(&pdev->dev, "failed to request hwspinlock\n");
 545                 return -ENXIO;
 546         }
 547
 548         ret = devm_add_action(&pdev->dev, sc27xx_adc_free_hwlock,
 549                               sc27xx_data->hwlock);
 550         if (ret) {
 551                 sc27xx_adc_free_hwlock(sc27xx_data->hwlock);
 552                 dev_err(&pdev->dev, "failed to add hwspinlock action\n");
 553                 return ret;
 554         }
 555
 556         init_completion(&sc27xx_data->completion);
 557         sc27xx_data->dev = &pdev->dev;
 558
 559         ret = sc27xx_adc_enable(sc27xx_data);
 560         if (ret) {
 561                 dev_err(&pdev->dev, "failed to enable ADC module\n");
 562                 return ret;
 563         }
 564
 565         ret = devm_add_action(&pdev->dev, sc27xx_adc_disable, sc27xx_data);
 566         if (ret) {
 567                 sc27xx_adc_disable(sc27xx_data);
 568                 dev_err(&pdev->dev, "failed to add ADC disable action\n");
 569                 return ret;
 570         }
 571
 572         ret = devm_request_threaded_irq(&pdev->dev, sc27xx_data->irq, NULL,
 573                                         sc27xx_adc_isr, IRQF_ONESHOT,
 574                                         pdev->name, sc27xx_data);
 575         if (ret) {
 576                 dev_err(&pdev->dev, "failed to request ADC irq\n");
 577                 return ret;
 578         }
 579
 580         indio_dev->dev.parent = &pdev->dev;
 581         indio_dev->name = dev_name(&pdev->dev);
 582         indio_dev->modes = INDIO_DIRECT_MODE;
 583         indio_dev->info = &sc27xx_info;
 584         indio_dev->channels = sc27xx_channels;
 585         indio_dev->num_channels = ARRAY_SIZE(sc27xx_channels);
 586         ret = devm_iio_device_register(&pdev->dev, indio_dev);
 587         if (ret)
 588                 dev_err(&pdev->dev, "could not register iio (ADC)");
 589
 590         return ret;
 591 }
 592
 593 static const struct of_device_id sc27xx_adc_of_match[] = {
 594         { .compatible = "sprd,sc2731-adc", },
 595         { }
 596 };
 597
 598 static struct platform_driver sc27xx_adc_driver = {
 599         .probe = sc27xx_adc_probe,
 600         .driver = {
 601                 .name = "sc27xx-adc",
 602                 .of_match_table = sc27xx_adc_of_match,
 603         },
 604 };
 605
 606 module_platform_driver(sc27xx_adc_driver);
 607
 608 MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
 609 MODULE_DESCRIPTION("Spreadtrum SC27XX ADC Driver");
 610 MODULE_LICENSE("GPL v2");