i2c: Drop redundant platform data setting in drivers
[oweals/u-boot.git] / drivers / i2c / intel_i2c.c
1 /*
2  * Copyright (c) 2015 Google, Inc
3  * Written by Simon Glass <sjg@chromium.org>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <common.h>
9 #include <dm.h>
10 #include <i2c.h>
11 #include <asm/io.h>
12 #include <asm/arch/pch.h>
13
14 int intel_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
15 {
16         return -ENOSYS;
17 }
18
19 int intel_i2c_probe_chip(struct udevice *bus, uint chip_addr, uint chip_flags)
20 {
21         return -ENOSYS;
22 }
23
24 int intel_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
25 {
26         return 0;
27 }
28
29 static int intel_i2c_probe(struct udevice *dev)
30 {
31         /*
32          * So far this is just setup code for ivybridge SMbus. When we have
33          * a full I2C driver this may need to be moved, generalised or made
34          * dependant on a particular compatible string.
35          *
36          * Set SMBus I/O base
37          */
38         dm_pci_write_config32(dev, SMB_BASE,
39                               SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
40
41         /* Set SMBus enable. */
42         dm_pci_write_config8(dev, HOSTC, HST_EN);
43
44         /* Set SMBus I/O space enable. */
45         dm_pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
46
47         /* Disable interrupt generation. */
48         outb(0, SMBUS_IO_BASE + SMBHSTCTL);
49
50         /* Clear any lingering errors, so transactions can run. */
51         outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
52         debug("SMBus controller enabled\n");
53
54         return 0;
55 }
56
57 static const struct dm_i2c_ops intel_i2c_ops = {
58         .xfer           = intel_i2c_xfer,
59         .probe_chip     = intel_i2c_probe_chip,
60         .set_bus_speed  = intel_i2c_set_bus_speed,
61 };
62
63 static const struct udevice_id intel_i2c_ids[] = {
64         { .compatible = "intel,ich-i2c" },
65         { }
66 };
67
68 U_BOOT_DRIVER(intel_i2c) = {
69         .name   = "i2c_intel",
70         .id     = UCLASS_I2C,
71         .of_match = intel_i2c_ids,
72         .ops    = &intel_i2c_ops,
73         .probe  = intel_i2c_probe,
74 };