2 # GPIO infrastructure and drivers
8 bool "Enable Driver Model for GPIO drivers"
11 Enable driver model for GPIO access. The standard GPIO
12 interface (gpio_get_value(), etc.) is then implemented by
13 the GPIO uclass. Drivers provide methods to query the
14 particular GPIOs that they provide. The uclass interface
15 is defined in include/asm-generic/gpio.h.
18 bool "Enable GPIO hog support"
22 Enable gpio hog support
23 The GPIO chip may contain GPIO hog definitions. GPIO hogging
24 is a mechanism providing automatic GPIO request and config-
25 uration as part of the gpio-controller's driver probe function.
28 bool "Altera PIO driver"
31 Select this to enable PIO for Altera devices. Please find
32 details on the "Embedded Peripherals IP User Guide" of Altera.
35 bool "BCM6345 GPIO driver"
36 depends on DM_GPIO && (ARCH_BMIPS || ARCH_BCM6858 || ARCH_BCM63158)
38 This driver supports the GPIO banks on BCM6345 SoCs.
41 bool "DWAPB GPIO driver"
42 depends on DM && DM_GPIO
45 Support for the Designware APB GPIO driver.
48 bool "AT91 PIO GPIO driver"
52 Say yes here to select AT91 PIO GPIO driver. AT91 PIO
53 controller manages up to 32 fully programmable input/output
54 lines. Each I/O line may be dedicated as a general-purpose
55 I/O or be assigned to a function of an embedded peripheral.
56 The assignment to a function of an embedded peripheral is
57 the responsibility of AT91 Pinctrl driver. This driver is
58 responsible for the general-purpose I/O.
61 bool "ATMEL PIO4 driver"
65 Say yes here to support the Atmel PIO4 driver.
66 The PIO4 is new version of Atmel PIO controller, which manages
67 up to 128 fully programmable input/output lines. Each I/O line
68 may be dedicated as a general purpose I/O or be assigned to
69 a function of an embedded peripheral.
72 bool "DA8xx GPIO Driver"
74 This driver supports the DA8xx GPIO controller
76 config INTEL_BROADWELL_GPIO
77 bool "Intel Broadwell GPIO driver"
80 This driver supports Broadwell U devices which have an expanded
81 GPIO feature set. The difference is large enough to merit a separate
82 driver from the common Intel ICH6 driver. It supports a total of
83 95 GPIOs which can be configured from the device tree.
85 config INTEL_ICH6_GPIO
86 bool "Intel ICH6 compatible legacy GPIO driver"
89 Say yes here to select Intel ICH6 compatible legacy GPIO driver.
92 bool "i.MX7ULP RGPIO2P driver"
96 This driver supports i.MX7ULP Rapid GPIO2P controller.
99 bool "HSDK CREG GPIO griver"
103 This driver supports CREG GPIOs on Synopsys HSDK SOC.
106 bool "LPC32XX GPIO driver"
110 Support for the LPC32XX GPIO driver.
113 bool "Microsemi Serial GPIO driver"
114 depends on DM_GPIO && SOC_VCOREIII
116 Support for the VCoreIII SoC serial GPIO device. By using a
117 serial interface, the SIO controller significantly extends
118 the number of available GPIOs with a minimum number of
119 additional pins on the device. The primary purpose of the
120 SIO controller is to connect control signals from SFP
121 modules and to act as an LED controller.
124 bool "Qualcomm GPIO driver"
128 Support GPIO controllers on Qualcomm Snapdragon family of SoCs.
129 This controller have single bank (default name "soc"), every
130 gpio has it's own set of registers.
131 Only simple GPIO operations are supported (get/set, change of
132 direction and checking pin function).
138 bool "Freescale/NXP MXC GPIO driver"
140 Support GPIO controllers on various i.MX platforms
143 bool "TI OMAP GPIO driver"
144 depends on ARCH_OMAP2PLUS
147 Support GPIO controllers on the TI OMAP3/4/5 and related (such as
148 AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
151 bool "Enable the pca953x command"
153 Deprecated: This should be converted to driver model.
155 This command provides access to a pca953x GPIO device using the
156 legacy GPIO interface. Several subcommands are provided which mirror
157 the standard 'gpio' command. It should use that instead.
160 bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
161 depends on DM_GPIO && PMIC_PM8916
163 Support for GPIO pins and power/reset buttons found on
164 Qualcomm PM8916 PMIC.
165 Default name for GPIO bank is "pm8916".
166 Power and reset buttons are placed in "pm8916_key" bank and
167 have gpio numbers 0 and 1 respectively.
170 bool "PCF8575 I2C GPIO Expander driver"
171 depends on DM_GPIO && DM_I2C
173 Support for PCF8575 I2C 16-bit GPIO expander. Most of these
174 chips are from NXP and TI.
177 bool "Renesas RCar GPIO driver"
178 depends on DM_GPIO && ARCH_RMOBILE
180 This driver supports the GPIO banks on Renesas RCar SoCs.
183 bool "Renesas RZ/A1 GPIO driver"
184 depends on DM_GPIO && RZA1
186 This driver supports the GPIO banks on Renesas RZ/A1 R7S72100 SoCs.
189 bool "Rockchip GPIO driver"
192 Support GPIO access on Rockchip SoCs. The GPIOs are arranged into
193 a number of banks (different for each SoC type) each with 32 GPIOs.
194 The GPIOs for a device are defined in the device tree with one node
198 bool "Enable sandbox GPIO driver"
199 depends on SANDBOX && DM && DM_GPIO
201 This driver supports some simulated GPIOs which can be adjusted
202 using 'back door' functions like sandbox_gpio_set_value(). Then the
203 GPIOs can be inspected through the normal get_get_value()
204 interface. The purpose of this is to allow GPIOs to be used as
205 normal in sandbox, perhaps with test code actually driving the
206 behaviour of those GPIOs.
208 config SANDBOX_GPIO_COUNT
209 int "Number of sandbox GPIOs"
210 depends on SANDBOX_GPIO
213 The sandbox driver can support any number of GPIOs. Generally these
214 are specified using the device tree. But you can also have a number
215 of 'anonymous' GPIOs that do not belong to any device or bank.
216 Select a suitable value depending on your needs.
219 bool "Xilinx GPIO driver"
222 This config enable the Xilinx GPIO driver for Microblaze.
225 bool "tca642x - Command to access tca642x state"
227 DEPRECATED - This needs conversion to driver model
229 This provides a way to looking at the pin state of this device.
230 This mirrors the 'gpio' command and that should be used in preference
234 bool "Tegra20..210 GPIO driver"
237 Support for the GPIO controller contained in NVIDIA Tegra20 through
241 bool "Tegra186 GPIO driver"
244 Support for the GPIO controller contained in NVIDIA Tegra186. This
245 covers both the "main" and "AON" controller instances, even though
246 they have slightly different register layout.
250 depends on ARCH_UNIPHIER
252 Say yes here to support UniPhier GPIOs.
255 bool "Vybrid GPIO driver"
259 Say yes here to support Vybrid vf610 GPIOs.
262 bool "Microchip PIC32 GPIO driver"
263 depends on DM_GPIO && MACH_PIC32
266 Say yes here to support Microchip PIC32 GPIOs.
269 bool "ST STM32 GPIO driver"
270 depends on DM_GPIO && (STM32 || ARCH_STM32MP)
273 Device model driver support for STM32 GPIO controller. It should be
274 usable on many stm32 families like stm32f4 & stm32H7.
278 bool "Marvell MVEBU GPIO driver"
279 depends on DM_GPIO && ARCH_MVEBU
282 Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs.
285 bool "Zynq GPIO driver"
286 depends on DM_GPIO && (ARCH_ZYNQ || ARCH_ZYNQMP)
289 Supports GPIO access on Zynq SoC.
292 bool "74x164 serial-in/parallel-out 8-bits shift register"
295 Driver for 74x164 compatible serial-in/parallel-out 8-outputs
296 shift registers, such as 74lv165, 74hc595.
297 This driver can be used to provide access to more gpio outputs.
300 bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
303 Say yes here to provide access to several register-oriented
304 SMBus I/O expanders, made mostly by NXP or TI. Compatible
307 4 bits: pca9536, pca9537
309 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
310 pca9556, pca9557, pca9574, tca6408, xra1202
312 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
317 40 bits: pca9505, pca9698
319 Now, max 24 bits chips and PCA953X compatible chips are
322 config SPL_DM_PCA953X
323 bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL"
326 Say yes here to provide access to several register-oriented
327 SMBus I/O expanders, made mostly by NXP or TI. Compatible
330 4 bits: pca9536, pca9537
332 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554,
333 pca9556, pca9557, pca9574, tca6408, xra1202
335 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575,
340 40 bits: pca9505, pca9698
342 Now, max 24 bits chips and PCA953X compatible chips are
346 bool "Freescale MPC8XXX GPIO driver"
349 This driver supports the built-in GPIO controller of MPC8XXX CPUs.
350 Each GPIO bank is identified by its own entry in the device tree,
353 gpio-controller@fc00 {
355 compatible = "fsl,pq3-gpio";
359 By default, each bank is assumed to have 32 GPIOs, but the ngpios
360 setting is honored, so the number of GPIOs for each bank is
361 configurable to match the actual GPIO count of the SoC (e.g. the
362 32/32/23 banks of the P1022 SoC).
364 Aside from the standard functions of input/output mode, and output
365 value setting, the open-drain feature, which can configure individual
366 GPIOs to work as open-drain outputs, is supported.
369 bool "MediaTek MT7621 GPIO driver"
370 depends on DM_GPIO && SOC_MT7628
373 Say yes here to support MediaTek MT7621 compatible GPIOs.