drivers/ddr/fsl/options.c

   1 /*
   2  * Copyright 2008, 2010-2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <hwconfig.h>
   9 #include <fsl_ddr_sdram.h>
  10
  11 #include <fsl_ddr.h>
  12
  13 /*
  14  * Use our own stack based buffer before relocation to allow accessing longer
  15  * hwconfig strings that might be in the environment before we've relocated.
  16  * This is pretty fragile on both the use of stack and if the buffer is big
  17  * enough. However we will get a warning from getenv_f for the later.
  18  */
  19
  20 /* Board-specific functions defined in each board's ddr.c */
  21 extern void fsl_ddr_board_options(memctl_options_t *popts,
  22                 dimm_params_t *pdimm,
  23                 unsigned int ctrl_num);
  24
  25 struct dynamic_odt {
  26         unsigned int odt_rd_cfg;
  27         unsigned int odt_wr_cfg;
  28         unsigned int odt_rtt_norm;
  29         unsigned int odt_rtt_wr;
  30 };
  31
  32 #ifdef CONFIG_SYS_FSL_DDR4
  33 /* Quad rank is not verified yet due availability.
  34  * Replacing 20 OHM with 34 OHM since DDR4 doesn't have 20 OHM option
  35  */
  36 static const struct dynamic_odt single_Q[4] = {
  37         {       /* cs0 */
  38                 FSL_DDR_ODT_NEVER,
  39                 FSL_DDR_ODT_CS_AND_OTHER_DIMM,
  40                 DDR4_RTT_34_OHM,        /* unverified */
  41                 DDR4_RTT_120_OHM
  42         },
  43         {       /* cs1 */
  44                 FSL_DDR_ODT_NEVER,
  45                 FSL_DDR_ODT_NEVER,
  46                 DDR4_RTT_OFF,
  47                 DDR4_RTT_120_OHM
  48         },
  49         {       /* cs2 */
  50                 FSL_DDR_ODT_NEVER,
  51                 FSL_DDR_ODT_CS_AND_OTHER_DIMM,
  52                 DDR4_RTT_34_OHM,
  53                 DDR4_RTT_120_OHM
  54         },
  55         {       /* cs3 */
  56                 FSL_DDR_ODT_NEVER,
  57                 FSL_DDR_ODT_NEVER,      /* tied high */
  58                 DDR4_RTT_OFF,
  59                 DDR4_RTT_120_OHM
  60         }
  61 };
  62
  63 static const struct dynamic_odt single_D[4] = {
  64         {       /* cs0 */
  65                 FSL_DDR_ODT_NEVER,
  66                 FSL_DDR_ODT_ALL,
  67                 DDR4_RTT_40_OHM,
  68                 DDR4_RTT_OFF
  69         },
  70         {       /* cs1 */
  71                 FSL_DDR_ODT_NEVER,
  72                 FSL_DDR_ODT_NEVER,
  73                 DDR4_RTT_OFF,
  74                 DDR4_RTT_OFF
  75         },
  76         {0, 0, 0, 0},
  77         {0, 0, 0, 0}
  78 };
  79
  80 static const struct dynamic_odt single_S[4] = {
  81         {       /* cs0 */
  82                 FSL_DDR_ODT_NEVER,
  83                 FSL_DDR_ODT_ALL,
  84                 DDR4_RTT_40_OHM,
  85                 DDR4_RTT_OFF
  86         },
  87         {0, 0, 0, 0},
  88         {0, 0, 0, 0},
  89         {0, 0, 0, 0},
  90 };
  91
  92 static const struct dynamic_odt dual_DD[4] = {
  93         {       /* cs0 */
  94                 FSL_DDR_ODT_NEVER,
  95                 FSL_DDR_ODT_SAME_DIMM,
  96                 DDR4_RTT_120_OHM,
  97                 DDR4_RTT_OFF
  98         },
  99         {       /* cs1 */
 100                 FSL_DDR_ODT_OTHER_DIMM,
 101                 FSL_DDR_ODT_OTHER_DIMM,
 102                 DDR4_RTT_34_OHM,
 103                 DDR4_RTT_OFF
 104         },
 105         {       /* cs2 */
 106                 FSL_DDR_ODT_NEVER,
 107                 FSL_DDR_ODT_SAME_DIMM,
 108                 DDR4_RTT_120_OHM,
 109                 DDR4_RTT_OFF
 110         },
 111         {       /* cs3 */
 112                 FSL_DDR_ODT_OTHER_DIMM,
 113                 FSL_DDR_ODT_OTHER_DIMM,
 114                 DDR4_RTT_34_OHM,
 115                 DDR4_RTT_OFF
 116         }
 117 };
 118
 119 static const struct dynamic_odt dual_DS[4] = {
 120         {       /* cs0 */
 121                 FSL_DDR_ODT_NEVER,
 122                 FSL_DDR_ODT_SAME_DIMM,
 123                 DDR4_RTT_120_OHM,
 124                 DDR4_RTT_OFF
 125         },
 126         {       /* cs1 */
 127                 FSL_DDR_ODT_OTHER_DIMM,
 128                 FSL_DDR_ODT_OTHER_DIMM,
 129                 DDR4_RTT_34_OHM,
 130                 DDR4_RTT_OFF
 131         },
 132         {       /* cs2 */
 133                 FSL_DDR_ODT_OTHER_DIMM,
 134                 FSL_DDR_ODT_ALL,
 135                 DDR4_RTT_34_OHM,
 136                 DDR4_RTT_120_OHM
 137         },
 138         {0, 0, 0, 0}
 139 };
 140 static const struct dynamic_odt dual_SD[4] = {
 141         {       /* cs0 */
 142                 FSL_DDR_ODT_OTHER_DIMM,
 143                 FSL_DDR_ODT_ALL,
 144                 DDR4_RTT_34_OHM,
 145                 DDR4_RTT_120_OHM
 146         },
 147         {0, 0, 0, 0},
 148         {       /* cs2 */
 149                 FSL_DDR_ODT_NEVER,
 150                 FSL_DDR_ODT_SAME_DIMM,
 151                 DDR4_RTT_120_OHM,
 152                 DDR4_RTT_OFF
 153         },
 154         {       /* cs3 */
 155                 FSL_DDR_ODT_OTHER_DIMM,
 156                 FSL_DDR_ODT_OTHER_DIMM,
 157                 DDR4_RTT_34_OHM,
 158                 DDR4_RTT_OFF
 159         }
 160 };
 161
 162 static const struct dynamic_odt dual_SS[4] = {
 163         {       /* cs0 */
 164                 FSL_DDR_ODT_OTHER_DIMM,
 165                 FSL_DDR_ODT_ALL,
 166                 DDR4_RTT_34_OHM,
 167                 DDR4_RTT_120_OHM
 168         },
 169         {0, 0, 0, 0},
 170         {       /* cs2 */
 171                 FSL_DDR_ODT_OTHER_DIMM,
 172                 FSL_DDR_ODT_ALL,
 173                 DDR4_RTT_34_OHM,
 174                 DDR4_RTT_120_OHM
 175         },
 176         {0, 0, 0, 0}
 177 };
 178
 179 static const struct dynamic_odt dual_D0[4] = {
 180         {       /* cs0 */
 181                 FSL_DDR_ODT_NEVER,
 182                 FSL_DDR_ODT_SAME_DIMM,
 183                 DDR4_RTT_40_OHM,
 184                 DDR4_RTT_OFF
 185         },
 186         {       /* cs1 */
 187                 FSL_DDR_ODT_NEVER,
 188                 FSL_DDR_ODT_NEVER,
 189                 DDR4_RTT_OFF,
 190                 DDR4_RTT_OFF
 191         },
 192         {0, 0, 0, 0},
 193         {0, 0, 0, 0}
 194 };
 195
 196 static const struct dynamic_odt dual_0D[4] = {
 197         {0, 0, 0, 0},
 198         {0, 0, 0, 0},
 199         {       /* cs2 */
 200                 FSL_DDR_ODT_NEVER,
 201                 FSL_DDR_ODT_SAME_DIMM,
 202                 DDR4_RTT_40_OHM,
 203                 DDR4_RTT_OFF
 204         },
 205         {       /* cs3 */
 206                 FSL_DDR_ODT_NEVER,
 207                 FSL_DDR_ODT_NEVER,
 208                 DDR4_RTT_OFF,
 209                 DDR4_RTT_OFF
 210         }
 211 };
 212
 213 static const struct dynamic_odt dual_S0[4] = {
 214         {       /* cs0 */
 215                 FSL_DDR_ODT_NEVER,
 216                 FSL_DDR_ODT_CS,
 217                 DDR4_RTT_40_OHM,
 218                 DDR4_RTT_OFF
 219         },
 220         {0, 0, 0, 0},
 221         {0, 0, 0, 0},
 222         {0, 0, 0, 0}
 223
 224 };
 225
 226 static const struct dynamic_odt dual_0S[4] = {
 227         {0, 0, 0, 0},
 228         {0, 0, 0, 0},
 229         {       /* cs2 */
 230                 FSL_DDR_ODT_NEVER,
 231                 FSL_DDR_ODT_CS,
 232                 DDR4_RTT_40_OHM,
 233                 DDR4_RTT_OFF
 234         },
 235         {0, 0, 0, 0}
 236
 237 };
 238
 239 static const struct dynamic_odt odt_unknown[4] = {
 240         {       /* cs0 */
 241                 FSL_DDR_ODT_NEVER,
 242                 FSL_DDR_ODT_CS,
 243                 DDR4_RTT_120_OHM,
 244                 DDR4_RTT_OFF
 245         },
 246         {       /* cs1 */
 247                 FSL_DDR_ODT_NEVER,
 248                 FSL_DDR_ODT_CS,
 249                 DDR4_RTT_120_OHM,
 250                 DDR4_RTT_OFF
 251         },
 252         {       /* cs2 */
 253                 FSL_DDR_ODT_NEVER,
 254                 FSL_DDR_ODT_CS,
 255                 DDR4_RTT_120_OHM,
 256                 DDR4_RTT_OFF
 257         },
 258         {       /* cs3 */
 259                 FSL_DDR_ODT_NEVER,
 260                 FSL_DDR_ODT_CS,
 261                 DDR4_RTT_120_OHM,
 262                 DDR4_RTT_OFF
 263         }
 264 };
 265 #elif defined(CONFIG_SYS_FSL_DDR3)
 266 static const struct dynamic_odt single_Q[4] = {
 267         {       /* cs0 */
 268                 FSL_DDR_ODT_NEVER,
 269                 FSL_DDR_ODT_CS_AND_OTHER_DIMM,
 270                 DDR3_RTT_20_OHM,
 271                 DDR3_RTT_120_OHM
 272         },
 273         {       /* cs1 */
 274                 FSL_DDR_ODT_NEVER,
 275                 FSL_DDR_ODT_NEVER,      /* tied high */
 276                 DDR3_RTT_OFF,
 277                 DDR3_RTT_120_OHM
 278         },
 279         {       /* cs2 */
 280                 FSL_DDR_ODT_NEVER,
 281                 FSL_DDR_ODT_CS_AND_OTHER_DIMM,
 282                 DDR3_RTT_20_OHM,
 283                 DDR3_RTT_120_OHM
 284         },
 285         {       /* cs3 */
 286                 FSL_DDR_ODT_NEVER,
 287                 FSL_DDR_ODT_NEVER,      /* tied high */
 288                 DDR3_RTT_OFF,
 289                 DDR3_RTT_120_OHM
 290         }
 291 };
 292
 293 static const struct dynamic_odt single_D[4] = {
 294         {       /* cs0 */
 295                 FSL_DDR_ODT_NEVER,
 296                 FSL_DDR_ODT_ALL,
 297                 DDR3_RTT_40_OHM,
 298                 DDR3_RTT_OFF
 299         },
 300         {       /* cs1 */
 301                 FSL_DDR_ODT_NEVER,
 302                 FSL_DDR_ODT_NEVER,
 303                 DDR3_RTT_OFF,
 304                 DDR3_RTT_OFF
 305         },
 306         {0, 0, 0, 0},
 307         {0, 0, 0, 0}
 308 };
 309
 310 static const struct dynamic_odt single_S[4] = {
 311         {       /* cs0 */
 312                 FSL_DDR_ODT_NEVER,
 313                 FSL_DDR_ODT_ALL,
 314                 DDR3_RTT_40_OHM,
 315                 DDR3_RTT_OFF
 316         },
 317         {0, 0, 0, 0},
 318         {0, 0, 0, 0},
 319         {0, 0, 0, 0},
 320 };
 321
 322 static const struct dynamic_odt dual_DD[4] = {
 323         {       /* cs0 */
 324                 FSL_DDR_ODT_NEVER,
 325                 FSL_DDR_ODT_SAME_DIMM,
 326                 DDR3_RTT_120_OHM,
 327                 DDR3_RTT_OFF
 328         },
 329         {       /* cs1 */
 330                 FSL_DDR_ODT_OTHER_DIMM,
 331                 FSL_DDR_ODT_OTHER_DIMM,
 332                 DDR3_RTT_30_OHM,
 333                 DDR3_RTT_OFF
 334         },
 335         {       /* cs2 */
 336                 FSL_DDR_ODT_NEVER,
 337                 FSL_DDR_ODT_SAME_DIMM,
 338                 DDR3_RTT_120_OHM,
 339                 DDR3_RTT_OFF
 340         },
 341         {       /* cs3 */
 342                 FSL_DDR_ODT_OTHER_DIMM,
 343                 FSL_DDR_ODT_OTHER_DIMM,
 344                 DDR3_RTT_30_OHM,
 345                 DDR3_RTT_OFF
 346         }
 347 };
 348
 349 static const struct dynamic_odt dual_DS[4] = {
 350         {       /* cs0 */
 351                 FSL_DDR_ODT_NEVER,
 352                 FSL_DDR_ODT_SAME_DIMM,
 353                 DDR3_RTT_120_OHM,
 354                 DDR3_RTT_OFF
 355         },
 356         {       /* cs1 */
 357                 FSL_DDR_ODT_OTHER_DIMM,
 358                 FSL_DDR_ODT_OTHER_DIMM,
 359                 DDR3_RTT_30_OHM,
 360                 DDR3_RTT_OFF
 361         },
 362         {       /* cs2 */
 363                 FSL_DDR_ODT_OTHER_DIMM,
 364                 FSL_DDR_ODT_ALL,
 365                 DDR3_RTT_20_OHM,
 366                 DDR3_RTT_120_OHM
 367         },
 368         {0, 0, 0, 0}
 369 };
 370 static const struct dynamic_odt dual_SD[4] = {
 371         {       /* cs0 */
 372                 FSL_DDR_ODT_OTHER_DIMM,
 373                 FSL_DDR_ODT_ALL,
 374                 DDR3_RTT_20_OHM,
 375                 DDR3_RTT_120_OHM
 376         },
 377         {0, 0, 0, 0},
 378         {       /* cs2 */
 379                 FSL_DDR_ODT_NEVER,
 380                 FSL_DDR_ODT_SAME_DIMM,
 381                 DDR3_RTT_120_OHM,
 382                 DDR3_RTT_OFF
 383         },
 384         {       /* cs3 */
 385                 FSL_DDR_ODT_OTHER_DIMM,
 386                 FSL_DDR_ODT_OTHER_DIMM,
 387                 DDR3_RTT_20_OHM,
 388                 DDR3_RTT_OFF
 389         }
 390 };
 391
 392 static const struct dynamic_odt dual_SS[4] = {
 393         {       /* cs0 */
 394                 FSL_DDR_ODT_OTHER_DIMM,
 395                 FSL_DDR_ODT_ALL,
 396                 DDR3_RTT_30_OHM,
 397                 DDR3_RTT_120_OHM
 398         },
 399         {0, 0, 0, 0},
 400         {       /* cs2 */
 401                 FSL_DDR_ODT_OTHER_DIMM,
 402                 FSL_DDR_ODT_ALL,
 403                 DDR3_RTT_30_OHM,
 404                 DDR3_RTT_120_OHM
 405         },
 406         {0, 0, 0, 0}
 407 };
 408
 409 static const struct dynamic_odt dual_D0[4] = {
 410         {       /* cs0 */
 411                 FSL_DDR_ODT_NEVER,
 412                 FSL_DDR_ODT_SAME_DIMM,
 413                 DDR3_RTT_40_OHM,
 414                 DDR3_RTT_OFF
 415         },
 416         {       /* cs1 */
 417                 FSL_DDR_ODT_NEVER,
 418                 FSL_DDR_ODT_NEVER,
 419                 DDR3_RTT_OFF,
 420                 DDR3_RTT_OFF
 421         },
 422         {0, 0, 0, 0},
 423         {0, 0, 0, 0}
 424 };
 425
 426 static const struct dynamic_odt dual_0D[4] = {
 427         {0, 0, 0, 0},
 428         {0, 0, 0, 0},
 429         {       /* cs2 */
 430                 FSL_DDR_ODT_NEVER,
 431                 FSL_DDR_ODT_SAME_DIMM,
 432                 DDR3_RTT_40_OHM,
 433                 DDR3_RTT_OFF
 434         },
 435         {       /* cs3 */
 436                 FSL_DDR_ODT_NEVER,
 437                 FSL_DDR_ODT_NEVER,
 438                 DDR3_RTT_OFF,
 439                 DDR3_RTT_OFF
 440         }
 441 };
 442
 443 static const struct dynamic_odt dual_S0[4] = {
 444         {       /* cs0 */
 445                 FSL_DDR_ODT_NEVER,
 446                 FSL_DDR_ODT_CS,
 447                 DDR3_RTT_40_OHM,
 448                 DDR3_RTT_OFF
 449         },
 450         {0, 0, 0, 0},
 451         {0, 0, 0, 0},
 452         {0, 0, 0, 0}
 453
 454 };
 455
 456 static const struct dynamic_odt dual_0S[4] = {
 457         {0, 0, 0, 0},
 458         {0, 0, 0, 0},
 459         {       /* cs2 */
 460                 FSL_DDR_ODT_NEVER,
 461                 FSL_DDR_ODT_CS,
 462                 DDR3_RTT_40_OHM,
 463                 DDR3_RTT_OFF
 464         },
 465         {0, 0, 0, 0}
 466
 467 };
 468
 469 static const struct dynamic_odt odt_unknown[4] = {
 470         {       /* cs0 */
 471                 FSL_DDR_ODT_NEVER,
 472                 FSL_DDR_ODT_CS,
 473                 DDR3_RTT_120_OHM,
 474                 DDR3_RTT_OFF
 475         },
 476         {       /* cs1 */
 477                 FSL_DDR_ODT_NEVER,
 478                 FSL_DDR_ODT_CS,
 479                 DDR3_RTT_120_OHM,
 480                 DDR3_RTT_OFF
 481         },
 482         {       /* cs2 */
 483                 FSL_DDR_ODT_NEVER,
 484                 FSL_DDR_ODT_CS,
 485                 DDR3_RTT_120_OHM,
 486                 DDR3_RTT_OFF
 487         },
 488         {       /* cs3 */
 489                 FSL_DDR_ODT_NEVER,
 490                 FSL_DDR_ODT_CS,
 491                 DDR3_RTT_120_OHM,
 492                 DDR3_RTT_OFF
 493         }
 494 };
 495 #else   /* CONFIG_SYS_FSL_DDR3 */
 496 static const struct dynamic_odt single_Q[4] = {
 497         {0, 0, 0, 0},
 498         {0, 0, 0, 0},
 499         {0, 0, 0, 0},
 500         {0, 0, 0, 0}
 501 };
 502
 503 static const struct dynamic_odt single_D[4] = {
 504         {       /* cs0 */
 505                 FSL_DDR_ODT_NEVER,
 506                 FSL_DDR_ODT_ALL,
 507                 DDR2_RTT_150_OHM,
 508                 DDR2_RTT_OFF
 509         },
 510         {       /* cs1 */
 511                 FSL_DDR_ODT_NEVER,
 512                 FSL_DDR_ODT_NEVER,
 513                 DDR2_RTT_OFF,
 514                 DDR2_RTT_OFF
 515         },
 516         {0, 0, 0, 0},
 517         {0, 0, 0, 0}
 518 };
 519
 520 static const struct dynamic_odt single_S[4] = {
 521         {       /* cs0 */
 522                 FSL_DDR_ODT_NEVER,
 523                 FSL_DDR_ODT_ALL,
 524                 DDR2_RTT_150_OHM,
 525                 DDR2_RTT_OFF
 526         },
 527         {0, 0, 0, 0},
 528         {0, 0, 0, 0},
 529         {0, 0, 0, 0},
 530 };
 531
 532 static const struct dynamic_odt dual_DD[4] = {
 533         {       /* cs0 */
 534                 FSL_DDR_ODT_OTHER_DIMM,
 535                 FSL_DDR_ODT_OTHER_DIMM,
 536                 DDR2_RTT_75_OHM,
 537                 DDR2_RTT_OFF
 538         },
 539         {       /* cs1 */
 540                 FSL_DDR_ODT_NEVER,
 541                 FSL_DDR_ODT_NEVER,
 542                 DDR2_RTT_OFF,
 543                 DDR2_RTT_OFF
 544         },
 545         {       /* cs2 */
 546                 FSL_DDR_ODT_OTHER_DIMM,
 547                 FSL_DDR_ODT_OTHER_DIMM,
 548                 DDR2_RTT_75_OHM,
 549                 DDR2_RTT_OFF
 550         },
 551         {       /* cs3 */
 552                 FSL_DDR_ODT_NEVER,
 553                 FSL_DDR_ODT_NEVER,
 554                 DDR2_RTT_OFF,
 555                 DDR2_RTT_OFF
 556         }
 557 };
 558
 559 static const struct dynamic_odt dual_DS[4] = {
 560         {       /* cs0 */
 561                 FSL_DDR_ODT_OTHER_DIMM,
 562                 FSL_DDR_ODT_OTHER_DIMM,
 563                 DDR2_RTT_75_OHM,
 564                 DDR2_RTT_OFF
 565         },
 566         {       /* cs1 */
 567                 FSL_DDR_ODT_NEVER,
 568                 FSL_DDR_ODT_NEVER,
 569                 DDR2_RTT_OFF,
 570                 DDR2_RTT_OFF
 571         },
 572         {       /* cs2 */
 573                 FSL_DDR_ODT_OTHER_DIMM,
 574                 FSL_DDR_ODT_OTHER_DIMM,
 575                 DDR2_RTT_75_OHM,
 576                 DDR2_RTT_OFF
 577         },
 578         {0, 0, 0, 0}
 579 };
 580
 581 static const struct dynamic_odt dual_SD[4] = {
 582         {       /* cs0 */
 583                 FSL_DDR_ODT_OTHER_DIMM,
 584                 FSL_DDR_ODT_OTHER_DIMM,
 585                 DDR2_RTT_75_OHM,
 586                 DDR2_RTT_OFF
 587         },
 588         {0, 0, 0, 0},
 589         {       /* cs2 */
 590                 FSL_DDR_ODT_OTHER_DIMM,
 591                 FSL_DDR_ODT_OTHER_DIMM,
 592                 DDR2_RTT_75_OHM,
 593                 DDR2_RTT_OFF
 594         },
 595         {       /* cs3 */
 596                 FSL_DDR_ODT_NEVER,
 597                 FSL_DDR_ODT_NEVER,
 598                 DDR2_RTT_OFF,
 599                 DDR2_RTT_OFF
 600         }
 601 };
 602
 603 static const struct dynamic_odt dual_SS[4] = {
 604         {       /* cs0 */
 605                 FSL_DDR_ODT_OTHER_DIMM,
 606                 FSL_DDR_ODT_OTHER_DIMM,
 607                 DDR2_RTT_75_OHM,
 608                 DDR2_RTT_OFF
 609         },
 610         {0, 0, 0, 0},
 611         {       /* cs2 */
 612                 FSL_DDR_ODT_OTHER_DIMM,
 613                 FSL_DDR_ODT_OTHER_DIMM,
 614                 DDR2_RTT_75_OHM,
 615                 DDR2_RTT_OFF
 616         },
 617         {0, 0, 0, 0}
 618 };
 619
 620 static const struct dynamic_odt dual_D0[4] = {
 621         {       /* cs0 */
 622                 FSL_DDR_ODT_NEVER,
 623                 FSL_DDR_ODT_ALL,
 624                 DDR2_RTT_150_OHM,
 625                 DDR2_RTT_OFF
 626         },
 627         {       /* cs1 */
 628                 FSL_DDR_ODT_NEVER,
 629                 FSL_DDR_ODT_NEVER,
 630                 DDR2_RTT_OFF,
 631                 DDR2_RTT_OFF
 632         },
 633         {0, 0, 0, 0},
 634         {0, 0, 0, 0}
 635 };
 636
 637 static const struct dynamic_odt dual_0D[4] = {
 638         {0, 0, 0, 0},
 639         {0, 0, 0, 0},
 640         {       /* cs2 */
 641                 FSL_DDR_ODT_NEVER,
 642                 FSL_DDR_ODT_ALL,
 643                 DDR2_RTT_150_OHM,
 644                 DDR2_RTT_OFF
 645         },
 646         {       /* cs3 */
 647                 FSL_DDR_ODT_NEVER,
 648                 FSL_DDR_ODT_NEVER,
 649                 DDR2_RTT_OFF,
 650                 DDR2_RTT_OFF
 651         }
 652 };
 653
 654 static const struct dynamic_odt dual_S0[4] = {
 655         {       /* cs0 */
 656                 FSL_DDR_ODT_NEVER,
 657                 FSL_DDR_ODT_CS,
 658                 DDR2_RTT_150_OHM,
 659                 DDR2_RTT_OFF
 660         },
 661         {0, 0, 0, 0},
 662         {0, 0, 0, 0},
 663         {0, 0, 0, 0}
 664
 665 };
 666
 667 static const struct dynamic_odt dual_0S[4] = {
 668         {0, 0, 0, 0},
 669         {0, 0, 0, 0},
 670         {       /* cs2 */
 671                 FSL_DDR_ODT_NEVER,
 672                 FSL_DDR_ODT_CS,
 673                 DDR2_RTT_150_OHM,
 674                 DDR2_RTT_OFF
 675         },
 676         {0, 0, 0, 0}
 677
 678 };
 679
 680 static const struct dynamic_odt odt_unknown[4] = {
 681         {       /* cs0 */
 682                 FSL_DDR_ODT_NEVER,
 683                 FSL_DDR_ODT_CS,
 684                 DDR2_RTT_75_OHM,
 685                 DDR2_RTT_OFF
 686         },
 687         {       /* cs1 */
 688                 FSL_DDR_ODT_NEVER,
 689                 FSL_DDR_ODT_NEVER,
 690                 DDR2_RTT_OFF,
 691                 DDR2_RTT_OFF
 692         },
 693         {       /* cs2 */
 694                 FSL_DDR_ODT_NEVER,
 695                 FSL_DDR_ODT_CS,
 696                 DDR2_RTT_75_OHM,
 697                 DDR2_RTT_OFF
 698         },
 699         {       /* cs3 */
 700                 FSL_DDR_ODT_NEVER,
 701                 FSL_DDR_ODT_NEVER,
 702                 DDR2_RTT_OFF,
 703                 DDR2_RTT_OFF
 704         }
 705 };
 706 #endif
 707
 708 /*
 709  * Automatically seleect bank interleaving mode based on DIMMs
 710  * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null.
 711  * This function only deal with one or two slots per controller.
 712  */
 713 static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm)
 714 {
 715 #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
 716         if (pdimm[0].n_ranks == 4)
 717                 return FSL_DDR_CS0_CS1_CS2_CS3;
 718         else if (pdimm[0].n_ranks == 2)
 719                 return FSL_DDR_CS0_CS1;
 720 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
 721 #ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 722         if (pdimm[0].n_ranks == 4)
 723                 return FSL_DDR_CS0_CS1_CS2_CS3;
 724 #endif
 725         if (pdimm[0].n_ranks == 2) {
 726                 if (pdimm[1].n_ranks == 2)
 727                         return FSL_DDR_CS0_CS1_CS2_CS3;
 728                 else
 729                         return FSL_DDR_CS0_CS1;
 730         }
 731 #endif
 732         return 0;
 733 }
 734
 735 unsigned int populate_memctl_options(const common_timing_params_t *common_dimm,
 736                         memctl_options_t *popts,
 737                         dimm_params_t *pdimm,
 738                         unsigned int ctrl_num)
 739 {
 740         unsigned int i;
 741         char buffer[HWCONFIG_BUFFER_SIZE];
 742         char *buf = NULL;
 743 #if defined(CONFIG_SYS_FSL_DDR3) || \
 744         defined(CONFIG_SYS_FSL_DDR2) || \
 745         defined(CONFIG_SYS_FSL_DDR4)
 746         const struct dynamic_odt *pdodt = odt_unknown;
 747 #endif
 748         ulong ddr_freq;
 749
 750         /*
 751          * Extract hwconfig from environment since we have not properly setup
 752          * the environment but need it for ddr config params
 753          */
 754         if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
 755                 buf = buffer;
 756
 757 #if defined(CONFIG_SYS_FSL_DDR3) || \
 758         defined(CONFIG_SYS_FSL_DDR2) || \
 759         defined(CONFIG_SYS_FSL_DDR4)
 760         /* Chip select options. */
 761 #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
 762         switch (pdimm[0].n_ranks) {
 763         case 1:
 764                 pdodt = single_S;
 765                 break;
 766         case 2:
 767                 pdodt = single_D;
 768                 break;
 769         case 4:
 770                 pdodt = single_Q;
 771                 break;
 772         }
 773 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
 774         switch (pdimm[0].n_ranks) {
 775 #ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 776         case 4:
 777                 pdodt = single_Q;
 778                 if (pdimm[1].n_ranks)
 779                         printf("Error: Quad- and Dual-rank DIMMs cannot be used together\n");
 780                 break;
 781 #endif
 782         case 2:
 783                 switch (pdimm[1].n_ranks) {
 784                 case 2:
 785                         pdodt = dual_DD;
 786                         break;
 787                 case 1:
 788                         pdodt = dual_DS;
 789                         break;
 790                 case 0:
 791                         pdodt = dual_D0;
 792                         break;
 793                 }
 794                 break;
 795         case 1:
 796                 switch (pdimm[1].n_ranks) {
 797                 case 2:
 798                         pdodt = dual_SD;
 799                         break;
 800                 case 1:
 801                         pdodt = dual_SS;
 802                         break;
 803                 case 0:
 804                         pdodt = dual_S0;
 805                         break;
 806                 }
 807                 break;
 808         case 0:
 809                 switch (pdimm[1].n_ranks) {
 810                 case 2:
 811                         pdodt = dual_0D;
 812                         break;
 813                 case 1:
 814                         pdodt = dual_0S;
 815                         break;
 816                 }
 817                 break;
 818         }
 819 #endif  /* CONFIG_DIMM_SLOTS_PER_CTLR */
 820 #endif  /* CONFIG_SYS_FSL_DDR2, 3, 4 */
 821
 822         /* Pick chip-select local options. */
 823         for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
 824 #if defined(CONFIG_SYS_FSL_DDR3) || \
 825         defined(CONFIG_SYS_FSL_DDR2) || \
 826         defined(CONFIG_SYS_FSL_DDR4)
 827                 popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg;
 828                 popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg;
 829                 popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm;
 830                 popts->cs_local_opts[i].odt_rtt_wr = pdodt[i].odt_rtt_wr;
 831 #else
 832                 popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
 833                 popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
 834 #endif
 835                 popts->cs_local_opts[i].auto_precharge = 0;
 836         }
 837
 838         /* Pick interleaving mode. */
 839
 840         /*
 841          * 0 = no interleaving
 842          * 1 = interleaving between 2 controllers
 843          */
 844         popts->memctl_interleaving = 0;
 845
 846         /*
 847          * 0 = cacheline
 848          * 1 = page
 849          * 2 = (logical) bank
 850          * 3 = superbank (only if CS interleaving is enabled)
 851          */
 852         popts->memctl_interleaving_mode = 0;
 853
 854         /*
 855          * 0: cacheline: bit 30 of the 36-bit physical addr selects the memctl
 856          * 1: page:      bit to the left of the column bits selects the memctl
 857          * 2: bank:      bit to the left of the bank bits selects the memctl
 858          * 3: superbank: bit to the left of the chip select selects the memctl
 859          *
 860          * NOTE: ba_intlv (rank interleaving) is independent of memory
 861          * controller interleaving; it is only within a memory controller.
 862          * Must use superbank interleaving if rank interleaving is used and
 863          * memory controller interleaving is enabled.
 864          */
 865
 866         /*
 867          * 0 = no
 868          * 0x40 = CS0,CS1
 869          * 0x20 = CS2,CS3
 870          * 0x60 = CS0,CS1 + CS2,CS3
 871          * 0x04 = CS0,CS1,CS2,CS3
 872          */
 873         popts->ba_intlv_ctl = 0;
 874
 875         /* Memory Organization Parameters */
 876         popts->registered_dimm_en = common_dimm->all_dimms_registered;
 877
 878         /* Operational Mode Paramters */
 879
 880         /* Pick ECC modes */
 881         popts->ecc_mode = 0;              /* 0 = disabled, 1 = enabled */
 882 #ifdef CONFIG_DDR_ECC
 883         if (hwconfig_sub_f("fsl_ddr", "ecc", buf)) {
 884                 if (hwconfig_subarg_cmp_f("fsl_ddr", "ecc", "on", buf))
 885                         popts->ecc_mode = 1;
 886         } else
 887                 popts->ecc_mode = 1;
 888 #endif
 889         popts->ecc_init_using_memctl = 1; /* 0 = use DMA, 1 = use memctl */
 890
 891         /*
 892          * Choose DQS config
 893          * 0 for DDR1
 894          * 1 for DDR2
 895          */
 896 #if defined(CONFIG_SYS_FSL_DDR1)
 897         popts->dqs_config = 0;
 898 #elif defined(CONFIG_SYS_FSL_DDR2) || defined(CONFIG_SYS_FSL_DDR3)
 899         popts->dqs_config = 1;
 900 #endif
 901
 902         /* Choose self-refresh during sleep. */
 903         popts->self_refresh_in_sleep = 1;
 904
 905         /* Choose dynamic power management mode. */
 906         popts->dynamic_power = 0;
 907
 908         /*
 909          * check first dimm for primary sdram width
 910          * presuming all dimms are similar
 911          * 0 = 64-bit, 1 = 32-bit, 2 = 16-bit
 912          */
 913 #if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2)
 914         if (pdimm[0].n_ranks != 0) {
 915                 if ((pdimm[0].data_width >= 64) && \
 916                         (pdimm[0].data_width <= 72))
 917                         popts->data_bus_width = 0;
 918                 else if ((pdimm[0].data_width >= 32) || \
 919                         (pdimm[0].data_width <= 40))
 920                         popts->data_bus_width = 1;
 921                 else {
 922                         panic("Error: data width %u is invalid!\n",
 923                                 pdimm[0].data_width);
 924                 }
 925         }
 926 #else
 927         if (pdimm[0].n_ranks != 0) {
 928                 if (pdimm[0].primary_sdram_width == 64)
 929                         popts->data_bus_width = 0;
 930                 else if (pdimm[0].primary_sdram_width == 32)
 931                         popts->data_bus_width = 1;
 932                 else if (pdimm[0].primary_sdram_width == 16)
 933                         popts->data_bus_width = 2;
 934                 else {
 935                         panic("Error: primary sdram width %u is invalid!\n",
 936                                 pdimm[0].primary_sdram_width);
 937                 }
 938         }
 939 #endif
 940
 941         popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0;
 942
 943         /* Choose burst length. */
 944 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
 945 #if defined(CONFIG_E500MC)
 946         popts->otf_burst_chop_en = 0;   /* on-the-fly burst chop disable */
 947         popts->burst_length = DDR_BL8;  /* Fixed 8-beat burst len */
 948 #else
 949         if ((popts->data_bus_width == 1) || (popts->data_bus_width == 2)) {
 950                 /* 32-bit or 16-bit bus */
 951                 popts->otf_burst_chop_en = 0;
 952                 popts->burst_length = DDR_BL8;
 953         } else {
 954                 popts->otf_burst_chop_en = 1;   /* on-the-fly burst chop */
 955                 popts->burst_length = DDR_OTF;  /* on-the-fly BC4 and BL8 */
 956         }
 957 #endif
 958 #else
 959         popts->burst_length = DDR_BL4;  /* has to be 4 for DDR2 */
 960 #endif
 961
 962         /* Choose ddr controller address mirror mode */
 963 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
 964         for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
 965                 if (pdimm[i].n_ranks) {
 966                         popts->mirrored_dimm = pdimm[i].mirrored_dimm;
 967                         break;
 968                 }
 969         }
 970 #endif
 971
 972         /* Global Timing Parameters. */
 973         debug("mclk_ps = %u ps\n", get_memory_clk_period_ps(ctrl_num));
 974
 975         /* Pick a caslat override. */
 976         popts->cas_latency_override = 0;
 977         popts->cas_latency_override_value = 3;
 978         if (popts->cas_latency_override) {
 979                 debug("using caslat override value = %u\n",
 980                        popts->cas_latency_override_value);
 981         }
 982
 983         /* Decide whether to use the computed derated latency */
 984         popts->use_derated_caslat = 0;
 985
 986         /* Choose an additive latency. */
 987         popts->additive_latency_override = 0;
 988         popts->additive_latency_override_value = 3;
 989         if (popts->additive_latency_override) {
 990                 debug("using additive latency override value = %u\n",
 991                        popts->additive_latency_override_value);
 992         }
 993
 994         /*
 995          * 2T_EN setting
 996          *
 997          * Factors to consider for 2T_EN:
 998          *      - number of DIMMs installed
 999          *      - number of components, number of active ranks
1000          *      - how much time you want to spend playing around
1001          */
1002         popts->twot_en = 0;
1003         popts->threet_en = 0;
1004
1005         /* for RDIMM, address parity enable */
1006         popts->ap_en = 1;
1007
1008         /*
1009          * BSTTOPRE precharge interval
1010          *
1011          * Set this to 0 for global auto precharge
1012          * The value of 0x100 has been used for DDR1, DDR2, DDR3.
1013          * It is not wrong. Any value should be OK. The performance depends on
1014          * applications. There is no one good value for all. One way to set
1015          * is to use 1/4 of refint value.
1016          */
1017         popts->bstopre = picos_to_mclk(ctrl_num, common_dimm->refresh_rate_ps)
1018                          >> 2;
1019
1020         /*
1021          * Window for four activates -- tFAW
1022          *
1023          * FIXME: UM: applies only to DDR2/DDR3 with eight logical banks only
1024          * FIXME: varies depending upon number of column addresses or data
1025          * FIXME: width, was considering looking at pdimm->primary_sdram_width
1026          */
1027 #if defined(CONFIG_SYS_FSL_DDR1)
1028         popts->tfaw_window_four_activates_ps = mclk_to_picos(ctrl_num, 1);
1029
1030 #elif defined(CONFIG_SYS_FSL_DDR2)
1031         /*
1032          * x4/x8;  some datasheets have 35000
1033          * x16 wide columns only?  Use 50000?
1034          */
1035         popts->tfaw_window_four_activates_ps = 37500;
1036
1037 #else
1038         popts->tfaw_window_four_activates_ps = pdimm[0].tfaw_ps;
1039 #endif
1040         popts->zq_en = 0;
1041         popts->wrlvl_en = 0;
1042 #if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
1043         /*
1044          * due to ddr3 dimm is fly-by topology
1045          * we suggest to enable write leveling to
1046          * meet the tQDSS under different loading.
1047          */
1048         popts->wrlvl_en = 1;
1049         popts->zq_en = 1;
1050         popts->wrlvl_override = 0;
1051 #endif
1052
1053         /*
1054          * Check interleaving configuration from environment.
1055          * Please refer to doc/README.fsl-ddr for the detail.
1056          *
1057          * If memory controller interleaving is enabled, then the data
1058          * bus widths must be programmed identically for all memory controllers.
1059          *
1060          * Attempt to set all controllers to the same chip select
1061          * interleaving mode. It will do a best effort to get the
1062          * requested ranks interleaved together such that the result
1063          * should be a subset of the requested configuration.
1064          *
1065          * if CONFIG_SYS_FSL_DDR_INTLV_256B is defined, mandatory interleaving
1066          * with 256 Byte is enabled.
1067          */
1068 #if (CONFIG_NUM_DDR_CONTROLLERS > 1)
1069         if (!hwconfig_sub_f("fsl_ddr", "ctlr_intlv", buf))
1070 #ifdef CONFIG_SYS_FSL_DDR_INTLV_256B
1071                 ;
1072 #else
1073                 goto done;
1074 #endif
1075         if (pdimm[0].n_ranks == 0) {
1076                 printf("There is no rank on CS0 for controller %d.\n", ctrl_num);
1077                 popts->memctl_interleaving = 0;
1078                 goto done;
1079         }
1080         popts->memctl_interleaving = 1;
1081 #ifdef CONFIG_SYS_FSL_DDR_INTLV_256B
1082         popts->memctl_interleaving_mode = FSL_DDR_256B_INTERLEAVING;
1083         popts->memctl_interleaving = 1;
1084         debug("256 Byte interleaving\n");
1085 #else
1086         /*
1087          * test null first. if CONFIG_HWCONFIG is not defined
1088          * hwconfig_arg_cmp returns non-zero
1089          */
1090         if (hwconfig_subarg_cmp_f("fsl_ddr", "ctlr_intlv",
1091                                     "null", buf)) {
1092                 popts->memctl_interleaving = 0;
1093                 debug("memory controller interleaving disabled.\n");
1094         } else if (hwconfig_subarg_cmp_f("fsl_ddr",
1095                                         "ctlr_intlv",
1096                                         "cacheline", buf)) {
1097                 popts->memctl_interleaving_mode =
1098                         ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
1099                         0 : FSL_DDR_CACHE_LINE_INTERLEAVING;
1100                 popts->memctl_interleaving =
1101                         ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
1102                         0 : 1;
1103         } else if (hwconfig_subarg_cmp_f("fsl_ddr",
1104                                         "ctlr_intlv",
1105                                         "page", buf)) {
1106                 popts->memctl_interleaving_mode =
1107                         ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
1108                         0 : FSL_DDR_PAGE_INTERLEAVING;
1109                 popts->memctl_interleaving =
1110                         ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
1111                         0 : 1;
1112         } else if (hwconfig_subarg_cmp_f("fsl_ddr",
1113                                         "ctlr_intlv",
1114                                         "bank", buf)) {
1115                 popts->memctl_interleaving_mode =
1116                         ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
1117                         0 : FSL_DDR_BANK_INTERLEAVING;
1118                 popts->memctl_interleaving =
1119                         ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
1120                         0 : 1;
1121         } else if (hwconfig_subarg_cmp_f("fsl_ddr",
1122                                         "ctlr_intlv",
1123                                         "superbank", buf)) {
1124                 popts->memctl_interleaving_mode =
1125                         ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
1126                         0 : FSL_DDR_SUPERBANK_INTERLEAVING;
1127                 popts->memctl_interleaving =
1128                         ((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
1129                         0 : 1;
1130 #if (CONFIG_NUM_DDR_CONTROLLERS == 3)
1131         } else if (hwconfig_subarg_cmp_f("fsl_ddr",
1132                                         "ctlr_intlv",
1133                                         "3way_1KB", buf)) {
1134                 popts->memctl_interleaving_mode =
1135                         FSL_DDR_3WAY_1KB_INTERLEAVING;
1136         } else if (hwconfig_subarg_cmp_f("fsl_ddr",
1137                                         "ctlr_intlv",
1138                                         "3way_4KB", buf)) {
1139                 popts->memctl_interleaving_mode =
1140                         FSL_DDR_3WAY_4KB_INTERLEAVING;
1141         } else if (hwconfig_subarg_cmp_f("fsl_ddr",
1142                                         "ctlr_intlv",
1143                                         "3way_8KB", buf)) {
1144                 popts->memctl_interleaving_mode =
1145                         FSL_DDR_3WAY_8KB_INTERLEAVING;
1146 #elif (CONFIG_NUM_DDR_CONTROLLERS == 4)
1147         } else if (hwconfig_subarg_cmp_f("fsl_ddr",
1148                                         "ctlr_intlv",
1149                                         "4way_1KB", buf)) {
1150                 popts->memctl_interleaving_mode =
1151                         FSL_DDR_4WAY_1KB_INTERLEAVING;
1152         } else if (hwconfig_subarg_cmp_f("fsl_ddr",
1153                                         "ctlr_intlv",
1154                                         "4way_4KB", buf)) {
1155                 popts->memctl_interleaving_mode =
1156                         FSL_DDR_4WAY_4KB_INTERLEAVING;
1157         } else if (hwconfig_subarg_cmp_f("fsl_ddr",
1158                                         "ctlr_intlv",
1159                                         "4way_8KB", buf)) {
1160                 popts->memctl_interleaving_mode =
1161                         FSL_DDR_4WAY_8KB_INTERLEAVING;
1162 #endif
1163         } else {
1164                 popts->memctl_interleaving = 0;
1165                 printf("hwconfig has unrecognized parameter for ctlr_intlv.\n");
1166         }
1167 #endif  /* CONFIG_SYS_FSL_DDR_INTLV_256B */
1168 done:
1169 #endif /* CONFIG_NUM_DDR_CONTROLLERS > 1 */
1170         if ((hwconfig_sub_f("fsl_ddr", "bank_intlv", buf)) &&
1171                 (CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
1172                 /* test null first. if CONFIG_HWCONFIG is not defined,
1173                  * hwconfig_subarg_cmp_f returns non-zero */
1174                 if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1175                                             "null", buf))
1176                         debug("bank interleaving disabled.\n");
1177                 else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1178                                                  "cs0_cs1", buf))
1179                         popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
1180                 else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1181                                                  "cs2_cs3", buf))
1182                         popts->ba_intlv_ctl = FSL_DDR_CS2_CS3;
1183                 else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1184                                                  "cs0_cs1_and_cs2_cs3", buf))
1185                         popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3;
1186                 else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1187                                                  "cs0_cs1_cs2_cs3", buf))
1188                         popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
1189                 else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
1190                                                 "auto", buf))
1191                         popts->ba_intlv_ctl = auto_bank_intlv(pdimm);
1192                 else
1193                         printf("hwconfig has unrecognized parameter for bank_intlv.\n");
1194                 switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
1195                 case FSL_DDR_CS0_CS1_CS2_CS3:
1196 #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
1197                         if (pdimm[0].n_ranks < 4) {
1198                                 popts->ba_intlv_ctl = 0;
1199                                 printf("Not enough bank(chip-select) for "
1200                                         "CS0+CS1+CS2+CS3 on controller %d, "
1201                                         "interleaving disabled!\n", ctrl_num);
1202                         }
1203 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
1204 #ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
1205                         if (pdimm[0].n_ranks == 4)
1206                                 break;
1207 #endif
1208                         if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
1209                                 popts->ba_intlv_ctl = 0;
1210                                 printf("Not enough bank(chip-select) for "
1211                                         "CS0+CS1+CS2+CS3 on controller %d, "
1212                                         "interleaving disabled!\n", ctrl_num);
1213                         }
1214                         if (pdimm[0].capacity != pdimm[1].capacity) {
1215                                 popts->ba_intlv_ctl = 0;
1216                                 printf("Not identical DIMM size for "
1217                                         "CS0+CS1+CS2+CS3 on controller %d, "
1218                                         "interleaving disabled!\n", ctrl_num);
1219                         }
1220 #endif
1221                         break;
1222                 case FSL_DDR_CS0_CS1:
1223                         if (pdimm[0].n_ranks < 2) {
1224                                 popts->ba_intlv_ctl = 0;
1225                                 printf("Not enough bank(chip-select) for "
1226                                         "CS0+CS1 on controller %d, "
1227                                         "interleaving disabled!\n", ctrl_num);
1228                         }
1229                         break;
1230                 case FSL_DDR_CS2_CS3:
1231 #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
1232                         if (pdimm[0].n_ranks < 4) {
1233                                 popts->ba_intlv_ctl = 0;
1234                                 printf("Not enough bank(chip-select) for CS2+CS3 "
1235                                         "on controller %d, interleaving disabled!\n", ctrl_num);
1236                         }
1237 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
1238                         if (pdimm[1].n_ranks < 2) {
1239                                 popts->ba_intlv_ctl = 0;
1240                                 printf("Not enough bank(chip-select) for CS2+CS3 "
1241                                         "on controller %d, interleaving disabled!\n", ctrl_num);
1242                         }
1243 #endif
1244                         break;
1245                 case FSL_DDR_CS0_CS1_AND_CS2_CS3:
1246 #if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
1247                         if (pdimm[0].n_ranks < 4) {
1248                                 popts->ba_intlv_ctl = 0;
1249                                 printf("Not enough bank(CS) for CS0+CS1 and "
1250                                         "CS2+CS3 on controller %d, "
1251                                         "interleaving disabled!\n", ctrl_num);
1252                         }
1253 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
1254                         if ((pdimm[0].n_ranks < 2) || (pdimm[1].n_ranks < 2)) {
1255                                 popts->ba_intlv_ctl = 0;
1256                                 printf("Not enough bank(CS) for CS0+CS1 and "
1257                                         "CS2+CS3 on controller %d, "
1258                                         "interleaving disabled!\n", ctrl_num);
1259                         }
1260 #endif
1261                         break;
1262                 default:
1263                         popts->ba_intlv_ctl = 0;
1264                         break;
1265                 }
1266         }
1267
1268         if (hwconfig_sub_f("fsl_ddr", "addr_hash", buf)) {
1269                 if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash", "null", buf))
1270                         popts->addr_hash = 0;
1271                 else if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash",
1272                                                "true", buf))
1273                         popts->addr_hash = 1;
1274         }
1275
1276         if (pdimm[0].n_ranks == 4)
1277                 popts->quad_rank_present = 1;
1278
1279         ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
1280         if (popts->registered_dimm_en) {
1281                 popts->rcw_override = 1;
1282                 popts->rcw_1 = 0x000a5a00;
1283                 if (ddr_freq <= 800)
1284                         popts->rcw_2 = 0x00000000;
1285                 else if (ddr_freq <= 1066)
1286                         popts->rcw_2 = 0x00100000;
1287                 else if (ddr_freq <= 1333)
1288                         popts->rcw_2 = 0x00200000;
1289                 else
1290                         popts->rcw_2 = 0x00300000;
1291         }
1292
1293         fsl_ddr_board_options(popts, pdimm, ctrl_num);
1294
1295         return 0;
1296 }
1297
1298 void check_interleaving_options(fsl_ddr_info_t *pinfo)
1299 {
1300         int i, j, k, check_n_ranks, intlv_invalid = 0;
1301         unsigned int check_intlv, check_n_row_addr, check_n_col_addr;
1302         unsigned long long check_rank_density;
1303         struct dimm_params_s *dimm;
1304         int first_ctrl = pinfo->first_ctrl;
1305         int last_ctrl = first_ctrl + pinfo->num_ctrls - 1;
1306
1307         /*
1308          * Check if all controllers are configured for memory
1309          * controller interleaving. Identical dimms are recommended. At least
1310          * the size, row and col address should be checked.
1311          */
1312         j = 0;
1313         check_n_ranks = pinfo->dimm_params[first_ctrl][0].n_ranks;
1314         check_rank_density = pinfo->dimm_params[first_ctrl][0].rank_density;
1315         check_n_row_addr =  pinfo->dimm_params[first_ctrl][0].n_row_addr;
1316         check_n_col_addr = pinfo->dimm_params[first_ctrl][0].n_col_addr;
1317         check_intlv = pinfo->memctl_opts[first_ctrl].memctl_interleaving_mode;
1318         for (i = first_ctrl; i <= last_ctrl; i++) {
1319                 dimm = &pinfo->dimm_params[i][0];
1320                 if (!pinfo->memctl_opts[i].memctl_interleaving) {
1321                         continue;
1322                 } else if (((check_rank_density != dimm->rank_density) ||
1323                      (check_n_ranks != dimm->n_ranks) ||
1324                      (check_n_row_addr != dimm->n_row_addr) ||
1325                      (check_n_col_addr != dimm->n_col_addr) ||
1326                      (check_intlv !=
1327                         pinfo->memctl_opts[i].memctl_interleaving_mode))){
1328                         intlv_invalid = 1;
1329                         break;
1330                 } else {
1331                         j++;
1332                 }
1333
1334         }
1335         if (intlv_invalid) {
1336                 for (i = first_ctrl; i <= last_ctrl; i++)
1337                         pinfo->memctl_opts[i].memctl_interleaving = 0;
1338                 printf("Not all DIMMs are identical. "
1339                         "Memory controller interleaving disabled.\n");
1340         } else {
1341                 switch (check_intlv) {
1342                 case FSL_DDR_256B_INTERLEAVING:
1343                 case FSL_DDR_CACHE_LINE_INTERLEAVING:
1344                 case FSL_DDR_PAGE_INTERLEAVING:
1345                 case FSL_DDR_BANK_INTERLEAVING:
1346                 case FSL_DDR_SUPERBANK_INTERLEAVING:
1347 #if (3 == CONFIG_NUM_DDR_CONTROLLERS)
1348                                 k = 2;
1349 #else
1350                                 k = CONFIG_NUM_DDR_CONTROLLERS;
1351 #endif
1352                         break;
1353                 case FSL_DDR_3WAY_1KB_INTERLEAVING:
1354                 case FSL_DDR_3WAY_4KB_INTERLEAVING:
1355                 case FSL_DDR_3WAY_8KB_INTERLEAVING:
1356                 case FSL_DDR_4WAY_1KB_INTERLEAVING:
1357                 case FSL_DDR_4WAY_4KB_INTERLEAVING:
1358                 case FSL_DDR_4WAY_8KB_INTERLEAVING:
1359                 default:
1360                         k = CONFIG_NUM_DDR_CONTROLLERS;
1361                         break;
1362                 }
1363                 debug("%d of %d controllers are interleaving.\n", j, k);
1364                 if (j && (j != k)) {
1365                         for (i = first_ctrl; i <= last_ctrl; i++)
1366                                 pinfo->memctl_opts[i].memctl_interleaving = 0;
1367                         if ((last_ctrl - first_ctrl) > 1)
1368                                 puts("Not all controllers have compatible interleaving mode. All disabled.\n");
1369                 }
1370         }
1371         debug("Checking interleaving options completed\n");
1372 }
1373
1374 int fsl_use_spd(void)
1375 {
1376         int use_spd = 0;
1377
1378 #ifdef CONFIG_DDR_SPD
1379         char buffer[HWCONFIG_BUFFER_SIZE];
1380         char *buf = NULL;
1381
1382         /*
1383          * Extract hwconfig from environment since we have not properly setup
1384          * the environment but need it for ddr config params
1385          */
1386         if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
1387                 buf = buffer;
1388
1389         /* if hwconfig is not enabled, or "sdram" is not defined, use spd */
1390         if (hwconfig_sub_f("fsl_ddr", "sdram", buf)) {
1391                 if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram", "spd", buf))
1392                         use_spd = 1;
1393                 else if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram",
1394                                                "fixed", buf))
1395                         use_spd = 0;
1396                 else
1397                         use_spd = 1;
1398         } else
1399                 use_spd = 1;
1400 #endif
1401
1402         return use_spd;
1403 }