drivers/clk/rockchip/clk_rk3328.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * (C) Copyright 2017 Rockchip Electronics Co., Ltd
   4  */
   5
   6 #include <common.h>
   7 #include <bitfield.h>
   8 #include <clk-uclass.h>
   9 #include <dm.h>
  10 #include <errno.h>
  11 #include <malloc.h>
  12 #include <syscon.h>
  13 #include <asm/arch-rockchip/clock.h>
  14 #include <asm/arch-rockchip/cru_rk3328.h>
  15 #include <asm/arch-rockchip/hardware.h>
  16 #include <asm/arch-rockchip/grf_rk3328.h>
  17 #include <asm/io.h>
  18 #include <dm/lists.h>
  19 #include <dt-bindings/clock/rk3328-cru.h>
  20
  21 struct pll_div {
  22         u32 refdiv;
  23         u32 fbdiv;
  24         u32 postdiv1;
  25         u32 postdiv2;
  26         u32 frac;
  27 };
  28
  29 #define RATE_TO_DIV(input_rate, output_rate) \
  30         ((input_rate) / (output_rate) - 1);
  31 #define DIV_TO_RATE(input_rate, div)    ((input_rate) / ((div) + 1))
  32
  33 #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
  34         .refdiv = _refdiv,\
  35         .fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\
  36         .postdiv1 = _postdiv1, .postdiv2 = _postdiv2};
  37
  38 static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 1, 4, 1);
  39 static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 2, 2, 1);
  40
  41 static const struct pll_div apll_816_cfg = PLL_DIVISORS(816 * MHz, 1, 2, 1);
  42 static const struct pll_div apll_600_cfg = PLL_DIVISORS(600 * MHz, 1, 3, 1);
  43
  44 static const struct pll_div *apll_cfgs[] = {
  45         [APLL_816_MHZ] = &apll_816_cfg,
  46         [APLL_600_MHZ] = &apll_600_cfg,
  47 };
  48
  49 enum {
  50         /* PLL_CON0 */
  51         PLL_POSTDIV1_SHIFT              = 12,
  52         PLL_POSTDIV1_MASK               = 0x7 << PLL_POSTDIV1_SHIFT,
  53         PLL_FBDIV_SHIFT                 = 0,
  54         PLL_FBDIV_MASK                  = 0xfff,
  55
  56         /* PLL_CON1 */
  57         PLL_DSMPD_SHIFT                 = 12,
  58         PLL_DSMPD_MASK                  = 1 << PLL_DSMPD_SHIFT,
  59         PLL_INTEGER_MODE                = 1,
  60         PLL_LOCK_STATUS_SHIFT           = 10,
  61         PLL_LOCK_STATUS_MASK            = 1 << PLL_LOCK_STATUS_SHIFT,
  62         PLL_POSTDIV2_SHIFT              = 6,
  63         PLL_POSTDIV2_MASK               = 0x7 << PLL_POSTDIV2_SHIFT,
  64         PLL_REFDIV_SHIFT                = 0,
  65         PLL_REFDIV_MASK                 = 0x3f,
  66
  67         /* PLL_CON2 */
  68         PLL_FRACDIV_SHIFT               = 0,
  69         PLL_FRACDIV_MASK                = 0xffffff,
  70
  71         /* MODE_CON */
  72         APLL_MODE_SHIFT                 = 0,
  73         NPLL_MODE_SHIFT                 = 1,
  74         DPLL_MODE_SHIFT                 = 4,
  75         CPLL_MODE_SHIFT                 = 8,
  76         GPLL_MODE_SHIFT                 = 12,
  77         PLL_MODE_SLOW                   = 0,
  78         PLL_MODE_NORM,
  79
  80         /* CLKSEL_CON0 */
  81         CLK_CORE_PLL_SEL_APLL           = 0,
  82         CLK_CORE_PLL_SEL_GPLL,
  83         CLK_CORE_PLL_SEL_DPLL,
  84         CLK_CORE_PLL_SEL_NPLL,
  85         CLK_CORE_PLL_SEL_SHIFT          = 6,
  86         CLK_CORE_PLL_SEL_MASK           = 3 << CLK_CORE_PLL_SEL_SHIFT,
  87         CLK_CORE_DIV_SHIFT              = 0,
  88         CLK_CORE_DIV_MASK               = 0x1f,
  89
  90         /* CLKSEL_CON1 */
  91         ACLKM_CORE_DIV_SHIFT            = 4,
  92         ACLKM_CORE_DIV_MASK             = 0x7 << ACLKM_CORE_DIV_SHIFT,
  93         PCLK_DBG_DIV_SHIFT              = 0,
  94         PCLK_DBG_DIV_MASK               = 0xF << PCLK_DBG_DIV_SHIFT,
  95
  96         /* CLKSEL_CON27 */
  97         GMAC2IO_PLL_SEL_SHIFT           = 7,
  98         GMAC2IO_PLL_SEL_MASK            = 1 << GMAC2IO_PLL_SEL_SHIFT,
  99         GMAC2IO_PLL_SEL_CPLL            = 0,
 100         GMAC2IO_PLL_SEL_GPLL            = 1,
 101         GMAC2IO_CLK_DIV_MASK            = 0x1f,
 102         GMAC2IO_CLK_DIV_SHIFT           = 0,
 103
 104         /* CLKSEL_CON28 */
 105         ACLK_PERIHP_PLL_SEL_CPLL        = 0,
 106         ACLK_PERIHP_PLL_SEL_GPLL,
 107         ACLK_PERIHP_PLL_SEL_HDMIPHY,
 108         ACLK_PERIHP_PLL_SEL_SHIFT       = 6,
 109         ACLK_PERIHP_PLL_SEL_MASK        = 3 << ACLK_PERIHP_PLL_SEL_SHIFT,
 110         ACLK_PERIHP_DIV_CON_SHIFT       = 0,
 111         ACLK_PERIHP_DIV_CON_MASK        = 0x1f,
 112
 113         /* CLKSEL_CON29 */
 114         PCLK_PERIHP_DIV_CON_SHIFT       = 4,
 115         PCLK_PERIHP_DIV_CON_MASK        = 0x7 << PCLK_PERIHP_DIV_CON_SHIFT,
 116         HCLK_PERIHP_DIV_CON_SHIFT       = 0,
 117         HCLK_PERIHP_DIV_CON_MASK        = 3 << HCLK_PERIHP_DIV_CON_SHIFT,
 118
 119         /* CLKSEL_CON22 */
 120         CLK_TSADC_DIV_CON_SHIFT         = 0,
 121         CLK_TSADC_DIV_CON_MASK          = 0x3ff,
 122
 123         /* CLKSEL_CON23 */
 124         CLK_SARADC_DIV_CON_SHIFT        = 0,
 125         CLK_SARADC_DIV_CON_MASK         = GENMASK(9, 0),
 126         CLK_SARADC_DIV_CON_WIDTH        = 10,
 127
 128         /* CLKSEL_CON24 */
 129         CLK_PWM_PLL_SEL_CPLL            = 0,
 130         CLK_PWM_PLL_SEL_GPLL,
 131         CLK_PWM_PLL_SEL_SHIFT           = 15,
 132         CLK_PWM_PLL_SEL_MASK            = 1 << CLK_PWM_PLL_SEL_SHIFT,
 133         CLK_PWM_DIV_CON_SHIFT           = 8,
 134         CLK_PWM_DIV_CON_MASK            = 0x7f << CLK_PWM_DIV_CON_SHIFT,
 135
 136         CLK_SPI_PLL_SEL_CPLL            = 0,
 137         CLK_SPI_PLL_SEL_GPLL,
 138         CLK_SPI_PLL_SEL_SHIFT           = 7,
 139         CLK_SPI_PLL_SEL_MASK            = 1 << CLK_SPI_PLL_SEL_SHIFT,
 140         CLK_SPI_DIV_CON_SHIFT           = 0,
 141         CLK_SPI_DIV_CON_MASK            = 0x7f << CLK_SPI_DIV_CON_SHIFT,
 142
 143         /* CLKSEL_CON30 */
 144         CLK_SDMMC_PLL_SEL_CPLL          = 0,
 145         CLK_SDMMC_PLL_SEL_GPLL,
 146         CLK_SDMMC_PLL_SEL_24M,
 147         CLK_SDMMC_PLL_SEL_USBPHY,
 148         CLK_SDMMC_PLL_SHIFT             = 8,
 149         CLK_SDMMC_PLL_MASK              = 0x3 << CLK_SDMMC_PLL_SHIFT,
 150         CLK_SDMMC_DIV_CON_SHIFT          = 0,
 151         CLK_SDMMC_DIV_CON_MASK           = 0xff << CLK_SDMMC_DIV_CON_SHIFT,
 152
 153         /* CLKSEL_CON32 */
 154         CLK_EMMC_PLL_SEL_CPLL           = 0,
 155         CLK_EMMC_PLL_SEL_GPLL,
 156         CLK_EMMC_PLL_SEL_24M,
 157         CLK_EMMC_PLL_SEL_USBPHY,
 158         CLK_EMMC_PLL_SHIFT              = 8,
 159         CLK_EMMC_PLL_MASK               = 0x3 << CLK_EMMC_PLL_SHIFT,
 160         CLK_EMMC_DIV_CON_SHIFT          = 0,
 161         CLK_EMMC_DIV_CON_MASK           = 0xff << CLK_EMMC_DIV_CON_SHIFT,
 162
 163         /* CLKSEL_CON34 */
 164         CLK_I2C_PLL_SEL_CPLL            = 0,
 165         CLK_I2C_PLL_SEL_GPLL,
 166         CLK_I2C_DIV_CON_MASK            = 0x7f,
 167         CLK_I2C_PLL_SEL_MASK            = 1,
 168         CLK_I2C1_PLL_SEL_SHIFT          = 15,
 169         CLK_I2C1_DIV_CON_SHIFT          = 8,
 170         CLK_I2C0_PLL_SEL_SHIFT          = 7,
 171         CLK_I2C0_DIV_CON_SHIFT          = 0,
 172
 173         /* CLKSEL_CON35 */
 174         CLK_I2C3_PLL_SEL_SHIFT          = 15,
 175         CLK_I2C3_DIV_CON_SHIFT          = 8,
 176         CLK_I2C2_PLL_SEL_SHIFT          = 7,
 177         CLK_I2C2_DIV_CON_SHIFT          = 0,
 178 };
 179
 180 #define VCO_MAX_KHZ     (3200 * (MHz / KHz))
 181 #define VCO_MIN_KHZ     (800 * (MHz / KHz))
 182 #define OUTPUT_MAX_KHZ  (3200 * (MHz / KHz))
 183 #define OUTPUT_MIN_KHZ  (16 * (MHz / KHz))
 184
 185 /*
 186  *  the div restructions of pll in integer mode, these are defined in
 187  *  * CRU_*PLL_CON0 or PMUCRU_*PLL_CON0
 188  */
 189 #define PLL_DIV_MIN     16
 190 #define PLL_DIV_MAX     3200
 191
 192 /*
 193  * How to calculate the PLL(from TRM V0.3 Part 1 Page 63):
 194  * Formulas also embedded within the Fractional PLL Verilog model:
 195  * If DSMPD = 1 (DSM is disabled, "integer mode")
 196  * FOUTVCO = FREF / REFDIV * FBDIV
 197  * FOUTPOSTDIV = FOUTVCO / POSTDIV1 / POSTDIV2
 198  * Where:
 199  * FOUTVCO = Fractional PLL non-divided output frequency
 200  * FOUTPOSTDIV = Fractional PLL divided output frequency
 201  *               (output of second post divider)
 202  * FREF = Fractional PLL input reference frequency, (the OSC_HZ 24MHz input)
 203  * REFDIV = Fractional PLL input reference clock divider
 204  * FBDIV = Integer value programmed into feedback divide
 205  *
 206  */
 207 static void rkclk_set_pll(struct rk3328_cru *cru, enum rk_clk_id clk_id,
 208                         const struct pll_div *div)
 209 {
 210         u32 *pll_con;
 211         u32 mode_shift, mode_mask;
 212
 213         pll_con = NULL;
 214         mode_shift = 0;
 215         switch (clk_id) {
 216         case CLK_ARM:
 217                 pll_con = cru->apll_con;
 218                 mode_shift = APLL_MODE_SHIFT;
 219                 break;
 220         case CLK_DDR:
 221                 pll_con = cru->dpll_con;
 222                 mode_shift = DPLL_MODE_SHIFT;
 223                 break;
 224         case CLK_CODEC:
 225                 pll_con = cru->cpll_con;
 226                 mode_shift = CPLL_MODE_SHIFT;
 227                 break;
 228         case CLK_GENERAL:
 229                 pll_con = cru->gpll_con;
 230                 mode_shift = GPLL_MODE_SHIFT;
 231                 break;
 232         case CLK_NEW:
 233                 pll_con = cru->npll_con;
 234                 mode_shift = NPLL_MODE_SHIFT;
 235                 break;
 236         default:
 237                 break;
 238         }
 239         mode_mask = 1 << mode_shift;
 240
 241         /* All 8 PLLs have same VCO and output frequency range restrictions. */
 242         u32 vco_khz = OSC_HZ / 1000 * div->fbdiv / div->refdiv;
 243         u32 output_khz = vco_khz / div->postdiv1 / div->postdiv2;
 244
 245         debug("PLL at %p: fbdiv=%d, refdiv=%d, postdiv1=%d, \
 246               postdiv2=%d, vco=%u khz, output=%u khz\n",
 247               pll_con, div->fbdiv, div->refdiv, div->postdiv1,
 248               div->postdiv2, vco_khz, output_khz);
 249         assert(vco_khz >= VCO_MIN_KHZ && vco_khz <= VCO_MAX_KHZ &&
 250                output_khz >= OUTPUT_MIN_KHZ && output_khz <= OUTPUT_MAX_KHZ &&
 251                div->fbdiv >= PLL_DIV_MIN && div->fbdiv <= PLL_DIV_MAX);
 252
 253         /*
 254          * When power on or changing PLL setting,
 255          * we must force PLL into slow mode to ensure output stable clock.
 256          */
 257         rk_clrsetreg(&cru->mode_con, mode_mask, PLL_MODE_SLOW << mode_shift);
 258
 259         /* use integer mode */
 260         rk_clrsetreg(&pll_con[1], PLL_DSMPD_MASK,
 261                      PLL_INTEGER_MODE << PLL_DSMPD_SHIFT);
 262
 263         rk_clrsetreg(&pll_con[0],
 264                      PLL_FBDIV_MASK | PLL_POSTDIV1_MASK,
 265                      (div->fbdiv << PLL_FBDIV_SHIFT) |
 266                      (div->postdiv1 << PLL_POSTDIV1_SHIFT));
 267         rk_clrsetreg(&pll_con[1],
 268                      PLL_POSTDIV2_MASK | PLL_REFDIV_MASK,
 269                      (div->postdiv2 << PLL_POSTDIV2_SHIFT) |
 270                      (div->refdiv << PLL_REFDIV_SHIFT));
 271
 272         /* waiting for pll lock */
 273         while (!(readl(&pll_con[1]) & (1 << PLL_LOCK_STATUS_SHIFT)))
 274                 udelay(1);
 275
 276         /* pll enter normal mode */
 277         rk_clrsetreg(&cru->mode_con, mode_mask, PLL_MODE_NORM << mode_shift);
 278 }
 279
 280 static void rkclk_init(struct rk3328_cru *cru)
 281 {
 282         u32 aclk_div;
 283         u32 hclk_div;
 284         u32 pclk_div;
 285
 286         rk3328_configure_cpu(cru, APLL_600_MHZ);
 287
 288         /* configure gpll cpll */
 289         rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg);
 290         rkclk_set_pll(cru, CLK_CODEC, &cpll_init_cfg);
 291
 292         /* configure perihp aclk, hclk, pclk */
 293         aclk_div = GPLL_HZ / PERIHP_ACLK_HZ - 1;
 294         hclk_div = PERIHP_ACLK_HZ / PERIHP_HCLK_HZ - 1;
 295         pclk_div = PERIHP_ACLK_HZ / PERIHP_PCLK_HZ - 1;
 296
 297         rk_clrsetreg(&cru->clksel_con[28],
 298                      ACLK_PERIHP_PLL_SEL_MASK | ACLK_PERIHP_DIV_CON_MASK,
 299                      ACLK_PERIHP_PLL_SEL_GPLL << ACLK_PERIHP_PLL_SEL_SHIFT |
 300                      aclk_div << ACLK_PERIHP_DIV_CON_SHIFT);
 301         rk_clrsetreg(&cru->clksel_con[29],
 302                      PCLK_PERIHP_DIV_CON_MASK | HCLK_PERIHP_DIV_CON_MASK,
 303                      pclk_div << PCLK_PERIHP_DIV_CON_SHIFT |
 304                      hclk_div << HCLK_PERIHP_DIV_CON_SHIFT);
 305 }
 306
 307 void rk3328_configure_cpu(struct rk3328_cru *cru,
 308                           enum apll_frequencies apll_freq)
 309 {
 310         u32 clk_core_div;
 311         u32 aclkm_div;
 312         u32 pclk_dbg_div;
 313
 314         rkclk_set_pll(cru, CLK_ARM, apll_cfgs[apll_freq]);
 315
 316         clk_core_div = APLL_HZ / CLK_CORE_HZ - 1;
 317         aclkm_div = APLL_HZ / ACLKM_CORE_HZ / (clk_core_div + 1) - 1;
 318         pclk_dbg_div = APLL_HZ / PCLK_DBG_HZ / (clk_core_div + 1) - 1;
 319
 320         rk_clrsetreg(&cru->clksel_con[0],
 321                      CLK_CORE_PLL_SEL_MASK | CLK_CORE_DIV_MASK,
 322                      CLK_CORE_PLL_SEL_APLL << CLK_CORE_PLL_SEL_SHIFT |
 323                      clk_core_div << CLK_CORE_DIV_SHIFT);
 324
 325         rk_clrsetreg(&cru->clksel_con[1],
 326                      PCLK_DBG_DIV_MASK | ACLKM_CORE_DIV_MASK,
 327                      pclk_dbg_div << PCLK_DBG_DIV_SHIFT |
 328                      aclkm_div << ACLKM_CORE_DIV_SHIFT);
 329 }
 330
 331
 332 static ulong rk3328_i2c_get_clk(struct rk3328_cru *cru, ulong clk_id)
 333 {
 334         u32 div, con;
 335
 336         switch (clk_id) {
 337         case SCLK_I2C0:
 338                 con = readl(&cru->clksel_con[34]);
 339                 div = con >> CLK_I2C0_DIV_CON_SHIFT & CLK_I2C_DIV_CON_MASK;
 340                 break;
 341         case SCLK_I2C1:
 342                 con = readl(&cru->clksel_con[34]);
 343                 div = con >> CLK_I2C1_DIV_CON_SHIFT & CLK_I2C_DIV_CON_MASK;
 344                 break;
 345         case SCLK_I2C2:
 346                 con = readl(&cru->clksel_con[35]);
 347                 div = con >> CLK_I2C2_DIV_CON_SHIFT & CLK_I2C_DIV_CON_MASK;
 348                 break;
 349         case SCLK_I2C3:
 350                 con = readl(&cru->clksel_con[35]);
 351                 div = con >> CLK_I2C3_DIV_CON_SHIFT & CLK_I2C_DIV_CON_MASK;
 352                 break;
 353         default:
 354                 printf("do not support this i2c bus\n");
 355                 return -EINVAL;
 356         }
 357
 358         return DIV_TO_RATE(GPLL_HZ, div);
 359 }
 360
 361 static ulong rk3328_i2c_set_clk(struct rk3328_cru *cru, ulong clk_id, uint hz)
 362 {
 363         int src_clk_div;
 364
 365         src_clk_div = GPLL_HZ / hz;
 366         assert(src_clk_div - 1 < 127);
 367
 368         switch (clk_id) {
 369         case SCLK_I2C0:
 370                 rk_clrsetreg(&cru->clksel_con[34],
 371                              CLK_I2C_DIV_CON_MASK << CLK_I2C0_DIV_CON_SHIFT |
 372                              CLK_I2C_PLL_SEL_MASK << CLK_I2C0_PLL_SEL_SHIFT,
 373                              (src_clk_div - 1) << CLK_I2C0_DIV_CON_SHIFT |
 374                              CLK_I2C_PLL_SEL_GPLL << CLK_I2C0_PLL_SEL_SHIFT);
 375                 break;
 376         case SCLK_I2C1:
 377                 rk_clrsetreg(&cru->clksel_con[34],
 378                              CLK_I2C_DIV_CON_MASK << CLK_I2C1_DIV_CON_SHIFT |
 379                              CLK_I2C_PLL_SEL_MASK << CLK_I2C1_PLL_SEL_SHIFT,
 380                              (src_clk_div - 1) << CLK_I2C1_DIV_CON_SHIFT |
 381                              CLK_I2C_PLL_SEL_GPLL << CLK_I2C1_PLL_SEL_SHIFT);
 382                 break;
 383         case SCLK_I2C2:
 384                 rk_clrsetreg(&cru->clksel_con[35],
 385                              CLK_I2C_DIV_CON_MASK << CLK_I2C2_DIV_CON_SHIFT |
 386                              CLK_I2C_PLL_SEL_MASK << CLK_I2C2_PLL_SEL_SHIFT,
 387                              (src_clk_div - 1) << CLK_I2C2_DIV_CON_SHIFT |
 388                              CLK_I2C_PLL_SEL_GPLL << CLK_I2C2_PLL_SEL_SHIFT);
 389                 break;
 390         case SCLK_I2C3:
 391                 rk_clrsetreg(&cru->clksel_con[35],
 392                              CLK_I2C_DIV_CON_MASK << CLK_I2C3_DIV_CON_SHIFT |
 393                              CLK_I2C_PLL_SEL_MASK << CLK_I2C3_PLL_SEL_SHIFT,
 394                              (src_clk_div - 1) << CLK_I2C3_DIV_CON_SHIFT |
 395                              CLK_I2C_PLL_SEL_GPLL << CLK_I2C3_PLL_SEL_SHIFT);
 396                 break;
 397         default:
 398                 printf("do not support this i2c bus\n");
 399                 return -EINVAL;
 400         }
 401
 402         return DIV_TO_RATE(GPLL_HZ, src_clk_div);
 403 }
 404
 405 static ulong rk3328_gmac2io_set_clk(struct rk3328_cru *cru, ulong rate)
 406 {
 407         struct rk3328_grf_regs *grf;
 408         ulong ret;
 409
 410         grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
 411
 412         /*
 413          * The RGMII CLK can be derived either from an external "clkin"
 414          * or can be generated from internally by a divider from SCLK_MAC.
 415          */
 416         if (readl(&grf->mac_con[1]) & BIT(10) &&
 417             readl(&grf->soc_con[4]) & BIT(14)) {
 418                 /* An external clock will always generate the right rate... */
 419                 ret = rate;
 420         } else {
 421                 u32 con = readl(&cru->clksel_con[27]);
 422                 ulong pll_rate;
 423                 u8 div;
 424
 425                 if ((con >> GMAC2IO_PLL_SEL_SHIFT) & GMAC2IO_PLL_SEL_GPLL)
 426                         pll_rate = GPLL_HZ;
 427                 else
 428                         pll_rate = CPLL_HZ;
 429
 430                 div = DIV_ROUND_UP(pll_rate, rate) - 1;
 431                 if (div <= 0x1f)
 432                         rk_clrsetreg(&cru->clksel_con[27], GMAC2IO_CLK_DIV_MASK,
 433                                      div << GMAC2IO_CLK_DIV_SHIFT);
 434                 else
 435                         debug("Unsupported div for gmac:%d\n", div);
 436
 437                 return DIV_TO_RATE(pll_rate, div);
 438         }
 439
 440         return ret;
 441 }
 442
 443 static ulong rk3328_mmc_get_clk(struct rk3328_cru *cru, uint clk_id)
 444 {
 445         u32 div, con, con_id;
 446
 447         switch (clk_id) {
 448         case HCLK_SDMMC:
 449         case SCLK_SDMMC:
 450                 con_id = 30;
 451                 break;
 452         case HCLK_EMMC:
 453         case SCLK_EMMC:
 454                 con_id = 32;
 455                 break;
 456         default:
 457                 return -EINVAL;
 458         }
 459         con = readl(&cru->clksel_con[con_id]);
 460         div = (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT;
 461
 462         if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT
 463             == CLK_EMMC_PLL_SEL_24M)
 464                 return DIV_TO_RATE(OSC_HZ, div) / 2;
 465         else
 466                 return DIV_TO_RATE(GPLL_HZ, div) / 2;
 467 }
 468
 469 static ulong rk3328_mmc_set_clk(struct rk3328_cru *cru,
 470                                 ulong clk_id, ulong set_rate)
 471 {
 472         int src_clk_div;
 473         u32 con_id;
 474
 475         switch (clk_id) {
 476         case HCLK_SDMMC:
 477         case SCLK_SDMMC:
 478                 con_id = 30;
 479                 break;
 480         case HCLK_EMMC:
 481         case SCLK_EMMC:
 482                 con_id = 32;
 483                 break;
 484         default:
 485                 return -EINVAL;
 486         }
 487         /* Select clk_sdmmc/emmc source from GPLL by default */
 488         /* mmc clock defaulg div 2 internal, need provide double in cru */
 489         src_clk_div = DIV_ROUND_UP(GPLL_HZ / 2, set_rate);
 490
 491         if (src_clk_div > 127) {
 492                 /* use 24MHz source for 400KHz clock */
 493                 src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate);
 494                 rk_clrsetreg(&cru->clksel_con[con_id],
 495                              CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,
 496                              CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT |
 497                              (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);
 498         } else {
 499                 rk_clrsetreg(&cru->clksel_con[con_id],
 500                              CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK,
 501                              CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT |
 502                              (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT);
 503         }
 504
 505         return rk3328_mmc_get_clk(cru, clk_id);
 506 }
 507
 508 static ulong rk3328_pwm_get_clk(struct rk3328_cru *cru)
 509 {
 510         u32 div, con;
 511
 512         con = readl(&cru->clksel_con[24]);
 513         div = (con & CLK_PWM_DIV_CON_MASK) >> CLK_PWM_DIV_CON_SHIFT;
 514
 515         return DIV_TO_RATE(GPLL_HZ, div);
 516 }
 517
 518 static ulong rk3328_pwm_set_clk(struct rk3328_cru *cru, uint hz)
 519 {
 520         u32 div = GPLL_HZ / hz;
 521
 522         rk_clrsetreg(&cru->clksel_con[24],
 523                      CLK_PWM_PLL_SEL_MASK | CLK_PWM_DIV_CON_MASK,
 524                      CLK_PWM_PLL_SEL_GPLL << CLK_PWM_PLL_SEL_SHIFT |
 525                      (div - 1) << CLK_PWM_DIV_CON_SHIFT);
 526
 527         return DIV_TO_RATE(GPLL_HZ, div);
 528 }
 529
 530 static ulong rk3328_saradc_get_clk(struct rk3328_cru *cru)
 531 {
 532         u32 div, val;
 533
 534         val = readl(&cru->clksel_con[23]);
 535         div = bitfield_extract(val, CLK_SARADC_DIV_CON_SHIFT,
 536                                CLK_SARADC_DIV_CON_WIDTH);
 537
 538         return DIV_TO_RATE(OSC_HZ, div);
 539 }
 540
 541 static ulong rk3328_saradc_set_clk(struct rk3328_cru *cru, uint hz)
 542 {
 543         int src_clk_div;
 544
 545         src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1;
 546         assert(src_clk_div < 128);
 547
 548         rk_clrsetreg(&cru->clksel_con[23],
 549                      CLK_SARADC_DIV_CON_MASK,
 550                      src_clk_div << CLK_SARADC_DIV_CON_SHIFT);
 551
 552         return rk3328_saradc_get_clk(cru);
 553 }
 554
 555 static ulong rk3328_clk_get_rate(struct clk *clk)
 556 {
 557         struct rk3328_clk_priv *priv = dev_get_priv(clk->dev);
 558         ulong rate = 0;
 559
 560         switch (clk->id) {
 561         case 0 ... 29:
 562                 return 0;
 563         case HCLK_SDMMC:
 564         case HCLK_EMMC:
 565         case SCLK_SDMMC:
 566         case SCLK_EMMC:
 567                 rate = rk3328_mmc_get_clk(priv->cru, clk->id);
 568                 break;
 569         case SCLK_I2C0:
 570         case SCLK_I2C1:
 571         case SCLK_I2C2:
 572         case SCLK_I2C3:
 573                 rate = rk3328_i2c_get_clk(priv->cru, clk->id);
 574                 break;
 575         case SCLK_PWM:
 576                 rate = rk3328_pwm_get_clk(priv->cru);
 577                 break;
 578         case SCLK_SARADC:
 579                 rate = rk3328_saradc_get_clk(priv->cru);
 580                 break;
 581         default:
 582                 return -ENOENT;
 583         }
 584
 585         return rate;
 586 }
 587
 588 static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate)
 589 {
 590         struct rk3328_clk_priv *priv = dev_get_priv(clk->dev);
 591         ulong ret = 0;
 592
 593         switch (clk->id) {
 594         case 0 ... 29:
 595                 return 0;
 596         case HCLK_SDMMC:
 597         case HCLK_EMMC:
 598         case SCLK_SDMMC:
 599         case SCLK_EMMC:
 600                 ret = rk3328_mmc_set_clk(priv->cru, clk->id, rate);
 601                 break;
 602         case SCLK_I2C0:
 603         case SCLK_I2C1:
 604         case SCLK_I2C2:
 605         case SCLK_I2C3:
 606                 ret = rk3328_i2c_set_clk(priv->cru, clk->id, rate);
 607                 break;
 608         case SCLK_MAC2IO:
 609                 ret = rk3328_gmac2io_set_clk(priv->cru, rate);
 610                 break;
 611         case SCLK_PWM:
 612                 ret = rk3328_pwm_set_clk(priv->cru, rate);
 613                 break;
 614         case SCLK_SARADC:
 615                 ret = rk3328_saradc_set_clk(priv->cru, rate);
 616                 break;
 617         case DCLK_LCDC:
 618         case SCLK_PDM:
 619         case SCLK_RTC32K:
 620         case SCLK_UART0:
 621         case SCLK_UART1:
 622         case SCLK_UART2:
 623         case SCLK_SDIO:
 624         case SCLK_TSP:
 625         case SCLK_WIFI:
 626         case ACLK_BUS_PRE:
 627         case HCLK_BUS_PRE:
 628         case PCLK_BUS_PRE:
 629         case ACLK_PERI_PRE:
 630         case HCLK_PERI:
 631         case PCLK_PERI:
 632         case ACLK_VIO_PRE:
 633         case HCLK_VIO_PRE:
 634         case ACLK_RGA_PRE:
 635         case SCLK_RGA:
 636         case ACLK_VOP_PRE:
 637         case ACLK_RKVDEC_PRE:
 638         case ACLK_RKVENC:
 639         case ACLK_VPU_PRE:
 640         case SCLK_VDEC_CABAC:
 641         case SCLK_VDEC_CORE:
 642         case SCLK_VENC_CORE:
 643         case SCLK_VENC_DSP:
 644         case SCLK_EFUSE:
 645         case PCLK_DDR:
 646         case ACLK_GMAC:
 647         case PCLK_GMAC:
 648         case SCLK_USB3OTG_SUSPEND:
 649                 return 0;
 650         default:
 651                 return -ENOENT;
 652         }
 653
 654         return ret;
 655 }
 656
 657 static int rk3328_gmac2io_set_parent(struct clk *clk, struct clk *parent)
 658 {
 659         struct rk3328_grf_regs *grf;
 660         const char *clock_output_name;
 661         int ret;
 662
 663         grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
 664
 665         /*
 666          * If the requested parent is in the same clock-controller and the id
 667          * is SCLK_MAC2IO_SRC ("clk_mac2io_src"), switch to the internal clock.
 668          */
 669         if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC2IO_SRC)) {
 670                 debug("%s: switching RGMII to SCLK_MAC2IO_SRC\n", __func__);
 671                 rk_clrreg(&grf->mac_con[1], BIT(10));
 672                 return 0;
 673         }
 674
 675         /*
 676          * Otherwise, we need to check the clock-output-names of the
 677          * requested parent to see if the requested id is "gmac_clkin".
 678          */
 679         ret = dev_read_string_index(parent->dev, "clock-output-names",
 680                                     parent->id, &clock_output_name);
 681         if (ret < 0)
 682                 return -ENODATA;
 683
 684         /* If this is "gmac_clkin", switch to the external clock input */
 685         if (!strcmp(clock_output_name, "gmac_clkin")) {
 686                 debug("%s: switching RGMII to CLKIN\n", __func__);
 687                 rk_setreg(&grf->mac_con[1], BIT(10));
 688                 return 0;
 689         }
 690
 691         return -EINVAL;
 692 }
 693
 694 static int rk3328_gmac2io_ext_set_parent(struct clk *clk, struct clk *parent)
 695 {
 696         struct rk3328_grf_regs *grf;
 697         const char *clock_output_name;
 698         int ret;
 699
 700         grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
 701
 702         /*
 703          * If the requested parent is in the same clock-controller and the id
 704          * is SCLK_MAC2IO ("clk_mac2io"), switch to the internal clock.
 705          */
 706         if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC2IO)) {
 707                 debug("%s: switching RGMII to SCLK_MAC2IO\n", __func__);
 708                 rk_clrreg(&grf->soc_con[4], BIT(14));
 709                 return 0;
 710         }
 711
 712         /*
 713          * Otherwise, we need to check the clock-output-names of the
 714          * requested parent to see if the requested id is "gmac_clkin".
 715          */
 716         ret = dev_read_string_index(parent->dev, "clock-output-names",
 717                                     parent->id, &clock_output_name);
 718         if (ret < 0)
 719                 return -ENODATA;
 720
 721         /* If this is "gmac_clkin", switch to the external clock input */
 722         if (!strcmp(clock_output_name, "gmac_clkin")) {
 723                 debug("%s: switching RGMII to CLKIN\n", __func__);
 724                 rk_setreg(&grf->soc_con[4], BIT(14));
 725                 return 0;
 726         }
 727
 728         return -EINVAL;
 729 }
 730
 731 static int rk3328_clk_set_parent(struct clk *clk, struct clk *parent)
 732 {
 733         switch (clk->id) {
 734         case SCLK_MAC2IO:
 735                 return rk3328_gmac2io_set_parent(clk, parent);
 736         case SCLK_MAC2IO_EXT:
 737                 return rk3328_gmac2io_ext_set_parent(clk, parent);
 738         case DCLK_LCDC:
 739         case SCLK_PDM:
 740         case SCLK_RTC32K:
 741         case SCLK_UART0:
 742         case SCLK_UART1:
 743         case SCLK_UART2:
 744                 return 0;
 745         }
 746
 747         debug("%s: unsupported clk %ld\n", __func__, clk->id);
 748         return -ENOENT;
 749 }
 750
 751 static struct clk_ops rk3328_clk_ops = {
 752         .get_rate = rk3328_clk_get_rate,
 753         .set_rate = rk3328_clk_set_rate,
 754         .set_parent = rk3328_clk_set_parent,
 755 };
 756
 757 static int rk3328_clk_probe(struct udevice *dev)
 758 {
 759         struct rk3328_clk_priv *priv = dev_get_priv(dev);
 760
 761         rkclk_init(priv->cru);
 762
 763         return 0;
 764 }
 765
 766 static int rk3328_clk_ofdata_to_platdata(struct udevice *dev)
 767 {
 768         struct rk3328_clk_priv *priv = dev_get_priv(dev);
 769
 770         priv->cru = dev_read_addr_ptr(dev);
 771
 772         return 0;
 773 }
 774
 775 static int rk3328_clk_bind(struct udevice *dev)
 776 {
 777         int ret;
 778         struct udevice *sys_child;
 779         struct sysreset_reg *priv;
 780
 781         /* The reset driver does not have a device node, so bind it here */
 782         ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
 783                                  &sys_child);
 784         if (ret) {
 785                 debug("Warning: No sysreset driver: ret=%d\n", ret);
 786         } else {
 787                 priv = malloc(sizeof(struct sysreset_reg));
 788                 priv->glb_srst_fst_value = offsetof(struct rk3328_cru,
 789                                                     glb_srst_fst_value);
 790                 priv->glb_srst_snd_value = offsetof(struct rk3328_cru,
 791                                                     glb_srst_snd_value);
 792                 sys_child->priv = priv;
 793         }
 794
 795 #if CONFIG_IS_ENABLED(RESET_ROCKCHIP)
 796         ret = offsetof(struct rk3328_cru, softrst_con[0]);
 797         ret = rockchip_reset_bind(dev, ret, 12);
 798         if (ret)
 799                 debug("Warning: software reset driver bind faile\n");
 800 #endif
 801
 802         return ret;
 803 }
 804
 805 static const struct udevice_id rk3328_clk_ids[] = {
 806         { .compatible = "rockchip,rk3328-cru" },
 807         { }
 808 };
 809
 810 U_BOOT_DRIVER(rockchip_rk3328_cru) = {
 811         .name           = "rockchip_rk3328_cru",
 812         .id             = UCLASS_CLK,
 813         .of_match       = rk3328_clk_ids,
 814         .priv_auto_alloc_size = sizeof(struct rk3328_clk_priv),
 815         .ofdata_to_platdata = rk3328_clk_ofdata_to_platdata,
 816         .ops            = &rk3328_clk_ops,
 817         .bind           = rk3328_clk_bind,
 818         .probe          = rk3328_clk_probe,
 819 };