drivers/acpi/pci_root.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  *  pci_root.c - ACPI PCI Root Bridge Driver ($Revision: 40 $)
   4  *
   5  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
   6  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
   7  */
   8
   9 #include <linux/kernel.h>
  10 #include <linux/module.h>
  11 #include <linux/init.h>
  12 #include <linux/types.h>
  13 #include <linux/mutex.h>
  14 #include <linux/pm.h>
  15 #include <linux/pm_runtime.h>
  16 #include <linux/pci.h>
  17 #include <linux/pci-acpi.h>
  18 #include <linux/dmar.h>
  19 #include <linux/acpi.h>
  20 #include <linux/slab.h>
  21 #include <linux/dmi.h>
  22 #include <linux/platform_data/x86/apple.h>
  23 #include <acpi/apei.h>  /* for acpi_hest_init() */
  24
  25 #include "internal.h"
  26
  27 #define _COMPONENT              ACPI_PCI_COMPONENT
  28 ACPI_MODULE_NAME("pci_root");
  29 #define ACPI_PCI_ROOT_CLASS             "pci_bridge"
  30 #define ACPI_PCI_ROOT_DEVICE_NAME       "PCI Root Bridge"
  31 static int acpi_pci_root_add(struct acpi_device *device,
  32                              const struct acpi_device_id *not_used);
  33 static void acpi_pci_root_remove(struct acpi_device *device);
  34
  35 static int acpi_pci_root_scan_dependent(struct acpi_device *adev)
  36 {
  37         acpiphp_check_host_bridge(adev);
  38         return 0;
  39 }
  40
  41 #define ACPI_PCIE_REQ_SUPPORT (OSC_PCI_EXT_CONFIG_SUPPORT \
  42                                 | OSC_PCI_ASPM_SUPPORT \
  43                                 | OSC_PCI_CLOCK_PM_SUPPORT \
  44                                 | OSC_PCI_MSI_SUPPORT)
  45
  46 static const struct acpi_device_id root_device_ids[] = {
  47         {"PNP0A03", 0},
  48         {"", 0},
  49 };
  50
  51 static struct acpi_scan_handler pci_root_handler = {
  52         .ids = root_device_ids,
  53         .attach = acpi_pci_root_add,
  54         .detach = acpi_pci_root_remove,
  55         .hotplug = {
  56                 .enabled = true,
  57                 .scan_dependent = acpi_pci_root_scan_dependent,
  58         },
  59 };
  60
  61 static DEFINE_MUTEX(osc_lock);
  62
  63 /**
  64  * acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge
  65  * @handle - the ACPI CA node in question.
  66  *
  67  * Note: we could make this API take a struct acpi_device * instead, but
  68  * for now, it's more convenient to operate on an acpi_handle.
  69  */
  70 int acpi_is_root_bridge(acpi_handle handle)
  71 {
  72         int ret;
  73         struct acpi_device *device;
  74
  75         ret = acpi_bus_get_device(handle, &device);
  76         if (ret)
  77                 return 0;
  78
  79         ret = acpi_match_device_ids(device, root_device_ids);
  80         if (ret)
  81                 return 0;
  82         else
  83                 return 1;
  84 }
  85 EXPORT_SYMBOL_GPL(acpi_is_root_bridge);
  86
  87 static acpi_status
  88 get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
  89 {
  90         struct resource *res = data;
  91         struct acpi_resource_address64 address;
  92         acpi_status status;
  93
  94         status = acpi_resource_to_address64(resource, &address);
  95         if (ACPI_FAILURE(status))
  96                 return AE_OK;
  97
  98         if ((address.address.address_length > 0) &&
  99             (address.resource_type == ACPI_BUS_NUMBER_RANGE)) {
 100                 res->start = address.address.minimum;
 101                 res->end = address.address.minimum + address.address.address_length - 1;
 102         }
 103
 104         return AE_OK;
 105 }
 106
 107 static acpi_status try_get_root_bridge_busnr(acpi_handle handle,
 108                                              struct resource *res)
 109 {
 110         acpi_status status;
 111
 112         res->start = -1;
 113         status =
 114             acpi_walk_resources(handle, METHOD_NAME__CRS,
 115                                 get_root_bridge_busnr_callback, res);
 116         if (ACPI_FAILURE(status))
 117                 return status;
 118         if (res->start == -1)
 119                 return AE_ERROR;
 120         return AE_OK;
 121 }
 122
 123 struct pci_osc_bit_struct {
 124         u32 bit;
 125         char *desc;
 126 };
 127
 128 static struct pci_osc_bit_struct pci_osc_support_bit[] = {
 129         { OSC_PCI_EXT_CONFIG_SUPPORT, "ExtendedConfig" },
 130         { OSC_PCI_ASPM_SUPPORT, "ASPM" },
 131         { OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" },
 132         { OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" },
 133         { OSC_PCI_MSI_SUPPORT, "MSI" },
 134         { OSC_PCI_HPX_TYPE_3_SUPPORT, "HPX-Type3" },
 135 };
 136
 137 static struct pci_osc_bit_struct pci_osc_control_bit[] = {
 138         { OSC_PCI_EXPRESS_NATIVE_HP_CONTROL, "PCIeHotplug" },
 139         { OSC_PCI_SHPC_NATIVE_HP_CONTROL, "SHPCHotplug" },
 140         { OSC_PCI_EXPRESS_PME_CONTROL, "PME" },
 141         { OSC_PCI_EXPRESS_AER_CONTROL, "AER" },
 142         { OSC_PCI_EXPRESS_CAPABILITY_CONTROL, "PCIeCapability" },
 143         { OSC_PCI_EXPRESS_LTR_CONTROL, "LTR" },
 144 };
 145
 146 static void decode_osc_bits(struct acpi_pci_root *root, char *msg, u32 word,
 147                             struct pci_osc_bit_struct *table, int size)
 148 {
 149         char buf[80];
 150         int i, len = 0;
 151         struct pci_osc_bit_struct *entry;
 152
 153         buf[0] = '\0';
 154         for (i = 0, entry = table; i < size; i++, entry++)
 155                 if (word & entry->bit)
 156                         len += snprintf(buf + len, sizeof(buf) - len, "%s%s",
 157                                         len ? " " : "", entry->desc);
 158
 159         dev_info(&root->device->dev, "_OSC: %s [%s]\n", msg, buf);
 160 }
 161
 162 static void decode_osc_support(struct acpi_pci_root *root, char *msg, u32 word)
 163 {
 164         decode_osc_bits(root, msg, word, pci_osc_support_bit,
 165                         ARRAY_SIZE(pci_osc_support_bit));
 166 }
 167
 168 static void decode_osc_control(struct acpi_pci_root *root, char *msg, u32 word)
 169 {
 170         decode_osc_bits(root, msg, word, pci_osc_control_bit,
 171                         ARRAY_SIZE(pci_osc_control_bit));
 172 }
 173
 174 static u8 pci_osc_uuid_str[] = "33DB4D5B-1FF7-401C-9657-7441C03DD766";
 175
 176 static acpi_status acpi_pci_run_osc(acpi_handle handle,
 177                                     const u32 *capbuf, u32 *retval)
 178 {
 179         struct acpi_osc_context context = {
 180                 .uuid_str = pci_osc_uuid_str,
 181                 .rev = 1,
 182                 .cap.length = 12,
 183                 .cap.pointer = (void *)capbuf,
 184         };
 185         acpi_status status;
 186
 187         status = acpi_run_osc(handle, &context);
 188         if (ACPI_SUCCESS(status)) {
 189                 *retval = *((u32 *)(context.ret.pointer + 8));
 190                 kfree(context.ret.pointer);
 191         }
 192         return status;
 193 }
 194
 195 static acpi_status acpi_pci_query_osc(struct acpi_pci_root *root,
 196                                         u32 support,
 197                                         u32 *control)
 198 {
 199         acpi_status status;
 200         u32 result, capbuf[3];
 201
 202         support &= OSC_PCI_SUPPORT_MASKS;
 203         support |= root->osc_support_set;
 204
 205         capbuf[OSC_QUERY_DWORD] = OSC_QUERY_ENABLE;
 206         capbuf[OSC_SUPPORT_DWORD] = support;
 207         if (control) {
 208                 *control &= OSC_PCI_CONTROL_MASKS;
 209                 capbuf[OSC_CONTROL_DWORD] = *control | root->osc_control_set;
 210         } else {
 211                 /* Run _OSC query only with existing controls. */
 212                 capbuf[OSC_CONTROL_DWORD] = root->osc_control_set;
 213         }
 214
 215         status = acpi_pci_run_osc(root->device->handle, capbuf, &result);
 216         if (ACPI_SUCCESS(status)) {
 217                 root->osc_support_set = support;
 218                 if (control)
 219                         *control = result;
 220         }
 221         return status;
 222 }
 223
 224 static acpi_status acpi_pci_osc_support(struct acpi_pci_root *root, u32 flags)
 225 {
 226         acpi_status status;
 227
 228         mutex_lock(&osc_lock);
 229         status = acpi_pci_query_osc(root, flags, NULL);
 230         mutex_unlock(&osc_lock);
 231         return status;
 232 }
 233
 234 struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
 235 {
 236         struct acpi_pci_root *root;
 237         struct acpi_device *device;
 238
 239         if (acpi_bus_get_device(handle, &device) ||
 240             acpi_match_device_ids(device, root_device_ids))
 241                 return NULL;
 242
 243         root = acpi_driver_data(device);
 244
 245         return root;
 246 }
 247 EXPORT_SYMBOL_GPL(acpi_pci_find_root);
 248
 249 struct acpi_handle_node {
 250         struct list_head node;
 251         acpi_handle handle;
 252 };
 253
 254 /**
 255  * acpi_get_pci_dev - convert ACPI CA handle to struct pci_dev
 256  * @handle: the handle in question
 257  *
 258  * Given an ACPI CA handle, the desired PCI device is located in the
 259  * list of PCI devices.
 260  *
 261  * If the device is found, its reference count is increased and this
 262  * function returns a pointer to its data structure.  The caller must
 263  * decrement the reference count by calling pci_dev_put().
 264  * If no device is found, %NULL is returned.
 265  */
 266 struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
 267 {
 268         int dev, fn;
 269         unsigned long long adr;
 270         acpi_status status;
 271         acpi_handle phandle;
 272         struct pci_bus *pbus;
 273         struct pci_dev *pdev = NULL;
 274         struct acpi_handle_node *node, *tmp;
 275         struct acpi_pci_root *root;
 276         LIST_HEAD(device_list);
 277
 278         /*
 279          * Walk up the ACPI CA namespace until we reach a PCI root bridge.
 280          */
 281         phandle = handle;
 282         while (!acpi_is_root_bridge(phandle)) {
 283                 node = kzalloc(sizeof(struct acpi_handle_node), GFP_KERNEL);
 284                 if (!node)
 285                         goto out;
 286
 287                 INIT_LIST_HEAD(&node->node);
 288                 node->handle = phandle;
 289                 list_add(&node->node, &device_list);
 290
 291                 status = acpi_get_parent(phandle, &phandle);
 292                 if (ACPI_FAILURE(status))
 293                         goto out;
 294         }
 295
 296         root = acpi_pci_find_root(phandle);
 297         if (!root)
 298                 goto out;
 299
 300         pbus = root->bus;
 301
 302         /*
 303          * Now, walk back down the PCI device tree until we return to our
 304          * original handle. Assumes that everything between the PCI root
 305          * bridge and the device we're looking for must be a P2P bridge.
 306          */
 307         list_for_each_entry(node, &device_list, node) {
 308                 acpi_handle hnd = node->handle;
 309                 status = acpi_evaluate_integer(hnd, "_ADR", NULL, &adr);
 310                 if (ACPI_FAILURE(status))
 311                         goto out;
 312                 dev = (adr >> 16) & 0xffff;
 313                 fn  = adr & 0xffff;
 314
 315                 pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
 316                 if (!pdev || hnd == handle)
 317                         break;
 318
 319                 pbus = pdev->subordinate;
 320                 pci_dev_put(pdev);
 321
 322                 /*
 323                  * This function may be called for a non-PCI device that has a
 324                  * PCI parent (eg. a disk under a PCI SATA controller).  In that
 325                  * case pdev->subordinate will be NULL for the parent.
 326                  */
 327                 if (!pbus) {
 328                         dev_dbg(&pdev->dev, "Not a PCI-to-PCI bridge\n");
 329                         pdev = NULL;
 330                         break;
 331                 }
 332         }
 333 out:
 334         list_for_each_entry_safe(node, tmp, &device_list, node)
 335                 kfree(node);
 336
 337         return pdev;
 338 }
 339 EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
 340
 341 /**
 342  * acpi_pci_osc_control_set - Request control of PCI root _OSC features.
 343  * @handle: ACPI handle of a PCI root bridge (or PCIe Root Complex).
 344  * @mask: Mask of _OSC bits to request control of, place to store control mask.
 345  * @req: Mask of _OSC bits the control of is essential to the caller.
 346  *
 347  * Run _OSC query for @mask and if that is successful, compare the returned
 348  * mask of control bits with @req.  If all of the @req bits are set in the
 349  * returned mask, run _OSC request for it.
 350  *
 351  * The variable at the @mask address may be modified regardless of whether or
 352  * not the function returns success.  On success it will contain the mask of
 353  * _OSC bits the BIOS has granted control of, but its contents are meaningless
 354  * on failure.
 355  **/
 356 acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req)
 357 {
 358         struct acpi_pci_root *root;
 359         acpi_status status = AE_OK;
 360         u32 ctrl, capbuf[3];
 361
 362         if (!mask)
 363                 return AE_BAD_PARAMETER;
 364
 365         ctrl = *mask & OSC_PCI_CONTROL_MASKS;
 366         if ((ctrl & req) != req)
 367                 return AE_TYPE;
 368
 369         root = acpi_pci_find_root(handle);
 370         if (!root)
 371                 return AE_NOT_EXIST;
 372
 373         mutex_lock(&osc_lock);
 374
 375         *mask = ctrl | root->osc_control_set;
 376         /* No need to evaluate _OSC if the control was already granted. */
 377         if ((root->osc_control_set & ctrl) == ctrl)
 378                 goto out;
 379
 380         /* Need to check the available controls bits before requesting them. */
 381         while (*mask) {
 382                 status = acpi_pci_query_osc(root, root->osc_support_set, mask);
 383                 if (ACPI_FAILURE(status))
 384                         goto out;
 385                 if (ctrl == *mask)
 386                         break;
 387                 decode_osc_control(root, "platform does not support",
 388                                    ctrl & ~(*mask));
 389                 ctrl = *mask;
 390         }
 391
 392         if ((ctrl & req) != req) {
 393                 decode_osc_control(root, "not requesting control; platform does not support",
 394                                    req & ~(ctrl));
 395                 status = AE_SUPPORT;
 396                 goto out;
 397         }
 398
 399         capbuf[OSC_QUERY_DWORD] = 0;
 400         capbuf[OSC_SUPPORT_DWORD] = root->osc_support_set;
 401         capbuf[OSC_CONTROL_DWORD] = ctrl;
 402         status = acpi_pci_run_osc(handle, capbuf, mask);
 403         if (ACPI_SUCCESS(status))
 404                 root->osc_control_set = *mask;
 405 out:
 406         mutex_unlock(&osc_lock);
 407         return status;
 408 }
 409 EXPORT_SYMBOL(acpi_pci_osc_control_set);
 410
 411 static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
 412                                  bool is_pcie)
 413 {
 414         u32 support, control, requested;
 415         acpi_status status;
 416         struct acpi_device *device = root->device;
 417         acpi_handle handle = device->handle;
 418
 419         /*
 420          * Apple always return failure on _OSC calls when _OSI("Darwin") has
 421          * been called successfully. We know the feature set supported by the
 422          * platform, so avoid calling _OSC at all
 423          */
 424         if (x86_apple_machine) {
 425                 root->osc_control_set = ~OSC_PCI_EXPRESS_PME_CONTROL;
 426                 decode_osc_control(root, "OS assumes control of",
 427                                    root->osc_control_set);
 428                 return;
 429         }
 430
 431         /*
 432          * All supported architectures that use ACPI have support for
 433          * PCI domains, so we indicate this in _OSC support capabilities.
 434          */
 435         support = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
 436         support |= OSC_PCI_HPX_TYPE_3_SUPPORT;
 437         if (pci_ext_cfg_avail())
 438                 support |= OSC_PCI_EXT_CONFIG_SUPPORT;
 439         if (pcie_aspm_support_enabled())
 440                 support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
 441         if (pci_msi_enabled())
 442                 support |= OSC_PCI_MSI_SUPPORT;
 443
 444         decode_osc_support(root, "OS supports", support);
 445         status = acpi_pci_osc_support(root, support);
 446         if (ACPI_FAILURE(status)) {
 447                 *no_aspm = 1;
 448
 449                 /* _OSC is optional for PCI host bridges */
 450                 if ((status == AE_NOT_FOUND) && !is_pcie)
 451                         return;
 452
 453                 dev_info(&device->dev, "_OSC failed (%s)%s\n",
 454                          acpi_format_exception(status),
 455                          pcie_aspm_support_enabled() ? "; disabling ASPM" : "");
 456                 return;
 457         }
 458
 459         if (pcie_ports_disabled) {
 460                 dev_info(&device->dev, "PCIe port services disabled; not requesting _OSC control\n");
 461                 return;
 462         }
 463
 464         if ((support & ACPI_PCIE_REQ_SUPPORT) != ACPI_PCIE_REQ_SUPPORT) {
 465                 decode_osc_support(root, "not requesting OS control; OS requires",
 466                                    ACPI_PCIE_REQ_SUPPORT);
 467                 return;
 468         }
 469
 470         control = OSC_PCI_EXPRESS_CAPABILITY_CONTROL
 471                 | OSC_PCI_EXPRESS_PME_CONTROL;
 472
 473         if (IS_ENABLED(CONFIG_PCIEASPM))
 474                 control |= OSC_PCI_EXPRESS_LTR_CONTROL;
 475
 476         if (IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE))
 477                 control |= OSC_PCI_EXPRESS_NATIVE_HP_CONTROL;
 478
 479         if (IS_ENABLED(CONFIG_HOTPLUG_PCI_SHPC))
 480                 control |= OSC_PCI_SHPC_NATIVE_HP_CONTROL;
 481
 482         if (pci_aer_available()) {
 483                 if (aer_acpi_firmware_first())
 484                         dev_info(&device->dev,
 485                                  "PCIe AER handled by firmware\n");
 486                 else
 487                         control |= OSC_PCI_EXPRESS_AER_CONTROL;
 488         }
 489
 490         requested = control;
 491         status = acpi_pci_osc_control_set(handle, &control,
 492                                           OSC_PCI_EXPRESS_CAPABILITY_CONTROL);
 493         if (ACPI_SUCCESS(status)) {
 494                 decode_osc_control(root, "OS now controls", control);
 495                 if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
 496                         /*
 497                          * We have ASPM control, but the FADT indicates that
 498                          * it's unsupported. Leave existing configuration
 499                          * intact and prevent the OS from touching it.
 500                          */
 501                         dev_info(&device->dev, "FADT indicates ASPM is unsupported, using BIOS configuration\n");
 502                         *no_aspm = 1;
 503                 }
 504         } else {
 505                 decode_osc_control(root, "OS requested", requested);
 506                 decode_osc_control(root, "platform willing to grant", control);
 507                 dev_info(&device->dev, "_OSC failed (%s); disabling ASPM\n",
 508                         acpi_format_exception(status));
 509
 510                 /*
 511                  * We want to disable ASPM here, but aspm_disabled
 512                  * needs to remain in its state from boot so that we
 513                  * properly handle PCIe 1.1 devices.  So we set this
 514                  * flag here, to defer the action until after the ACPI
 515                  * root scan.
 516                  */
 517                 *no_aspm = 1;
 518         }
 519 }
 520
 521 static int acpi_pci_root_add(struct acpi_device *device,
 522                              const struct acpi_device_id *not_used)
 523 {
 524         unsigned long long segment, bus;
 525         acpi_status status;
 526         int result;
 527         struct acpi_pci_root *root;
 528         acpi_handle handle = device->handle;
 529         int no_aspm = 0;
 530         bool hotadd = system_state == SYSTEM_RUNNING;
 531         bool is_pcie;
 532
 533         root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
 534         if (!root)
 535                 return -ENOMEM;
 536
 537         segment = 0;
 538         status = acpi_evaluate_integer(handle, METHOD_NAME__SEG, NULL,
 539                                        &segment);
 540         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
 541                 dev_err(&device->dev,  "can't evaluate _SEG\n");
 542                 result = -ENODEV;
 543                 goto end;
 544         }
 545
 546         /* Check _CRS first, then _BBN.  If no _BBN, default to zero. */
 547         root->secondary.flags = IORESOURCE_BUS;
 548         status = try_get_root_bridge_busnr(handle, &root->secondary);
 549         if (ACPI_FAILURE(status)) {
 550                 /*
 551                  * We need both the start and end of the downstream bus range
 552                  * to interpret _CBA (MMCONFIG base address), so it really is
 553                  * supposed to be in _CRS.  If we don't find it there, all we
 554                  * can do is assume [_BBN-0xFF] or [0-0xFF].
 555                  */
 556                 root->secondary.end = 0xFF;
 557                 dev_warn(&device->dev,
 558                          FW_BUG "no secondary bus range in _CRS\n");
 559                 status = acpi_evaluate_integer(handle, METHOD_NAME__BBN,
 560                                                NULL, &bus);
 561                 if (ACPI_SUCCESS(status))
 562                         root->secondary.start = bus;
 563                 else if (status == AE_NOT_FOUND)
 564                         root->secondary.start = 0;
 565                 else {
 566                         dev_err(&device->dev, "can't evaluate _BBN\n");
 567                         result = -ENODEV;
 568                         goto end;
 569                 }
 570         }
 571
 572         root->device = device;
 573         root->segment = segment & 0xFFFF;
 574         strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
 575         strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
 576         device->driver_data = root;
 577
 578         if (hotadd && dmar_device_add(handle)) {
 579                 result = -ENXIO;
 580                 goto end;
 581         }
 582
 583         pr_info(PREFIX "%s [%s] (domain %04x %pR)\n",
 584                acpi_device_name(device), acpi_device_bid(device),
 585                root->segment, &root->secondary);
 586
 587         root->mcfg_addr = acpi_pci_root_get_mcfg_addr(handle);
 588
 589         is_pcie = strcmp(acpi_device_hid(device), "PNP0A08") == 0;
 590         negotiate_os_control(root, &no_aspm, is_pcie);
 591
 592         /*
 593          * TBD: Need PCI interface for enumeration/configuration of roots.
 594          */
 595
 596         /*
 597          * Scan the Root Bridge
 598          * --------------------
 599          * Must do this prior to any attempt to bind the root device, as the
 600          * PCI namespace does not get created until this call is made (and
 601          * thus the root bridge's pci_dev does not exist).
 602          */
 603         root->bus = pci_acpi_scan_root(root);
 604         if (!root->bus) {
 605                 dev_err(&device->dev,
 606                         "Bus %04x:%02x not present in PCI namespace\n",
 607                         root->segment, (unsigned int)root->secondary.start);
 608                 device->driver_data = NULL;
 609                 result = -ENODEV;
 610                 goto remove_dmar;
 611         }
 612
 613         if (no_aspm)
 614                 pcie_no_aspm();
 615
 616         pci_acpi_add_bus_pm_notifier(device);
 617         device_set_wakeup_capable(root->bus->bridge, device->wakeup.flags.valid);
 618
 619         if (hotadd) {
 620                 pcibios_resource_survey_bus(root->bus);
 621                 pci_assign_unassigned_root_bus_resources(root->bus);
 622                 /*
 623                  * This is only called for the hotadd case. For the boot-time
 624                  * case, we need to wait until after PCI initialization in
 625                  * order to deal with IOAPICs mapped in on a PCI BAR.
 626                  *
 627                  * This is currently x86-specific, because acpi_ioapic_add()
 628                  * is an empty function without CONFIG_ACPI_HOTPLUG_IOAPIC.
 629                  * And CONFIG_ACPI_HOTPLUG_IOAPIC depends on CONFIG_X86_IO_APIC
 630                  * (see drivers/acpi/Kconfig).
 631                  */
 632                 acpi_ioapic_add(root->device->handle);
 633         }
 634
 635         pci_lock_rescan_remove();
 636         pci_bus_add_devices(root->bus);
 637         pci_unlock_rescan_remove();
 638         return 1;
 639
 640 remove_dmar:
 641         if (hotadd)
 642                 dmar_device_remove(handle);
 643 end:
 644         kfree(root);
 645         return result;
 646 }
 647
 648 static void acpi_pci_root_remove(struct acpi_device *device)
 649 {
 650         struct acpi_pci_root *root = acpi_driver_data(device);
 651
 652         pci_lock_rescan_remove();
 653
 654         pci_stop_root_bus(root->bus);
 655
 656         pci_ioapic_remove(root);
 657         device_set_wakeup_capable(root->bus->bridge, false);
 658         pci_acpi_remove_bus_pm_notifier(device);
 659
 660         pci_remove_root_bus(root->bus);
 661         WARN_ON(acpi_ioapic_remove(root));
 662
 663         dmar_device_remove(device->handle);
 664
 665         pci_unlock_rescan_remove();
 666
 667         kfree(root);
 668 }
 669
 670 /*
 671  * Following code to support acpi_pci_root_create() is copied from
 672  * arch/x86/pci/acpi.c and modified so it could be reused by x86, IA64
 673  * and ARM64.
 674  */
 675 static void acpi_pci_root_validate_resources(struct device *dev,
 676                                              struct list_head *resources,
 677                                              unsigned long type)
 678 {
 679         LIST_HEAD(list);
 680         struct resource *res1, *res2, *root = NULL;
 681         struct resource_entry *tmp, *entry, *entry2;
 682
 683         BUG_ON((type & (IORESOURCE_MEM | IORESOURCE_IO)) == 0);
 684         root = (type & IORESOURCE_MEM) ? &iomem_resource : &ioport_resource;
 685
 686         list_splice_init(resources, &list);
 687         resource_list_for_each_entry_safe(entry, tmp, &list) {
 688                 bool free = false;
 689                 resource_size_t end;
 690
 691                 res1 = entry->res;
 692                 if (!(res1->flags & type))
 693                         goto next;
 694
 695                 /* Exclude non-addressable range or non-addressable portion */
 696                 end = min(res1->end, root->end);
 697                 if (end <= res1->start) {
 698                         dev_info(dev, "host bridge window %pR (ignored, not CPU addressable)\n",
 699                                  res1);
 700                         free = true;
 701                         goto next;
 702                 } else if (res1->end != end) {
 703                         dev_info(dev, "host bridge window %pR ([%#llx-%#llx] ignored, not CPU addressable)\n",
 704                                  res1, (unsigned long long)end + 1,
 705                                  (unsigned long long)res1->end);
 706                         res1->end = end;
 707                 }
 708
 709                 resource_list_for_each_entry(entry2, resources) {
 710                         res2 = entry2->res;
 711                         if (!(res2->flags & type))
 712                                 continue;
 713
 714                         /*
 715                          * I don't like throwing away windows because then
 716                          * our resources no longer match the ACPI _CRS, but
 717                          * the kernel resource tree doesn't allow overlaps.
 718                          */
 719                         if (resource_overlaps(res1, res2)) {
 720                                 res2->start = min(res1->start, res2->start);
 721                                 res2->end = max(res1->end, res2->end);
 722                                 dev_info(dev, "host bridge window expanded to %pR; %pR ignored\n",
 723                                          res2, res1);
 724                                 free = true;
 725                                 goto next;
 726                         }
 727                 }
 728
 729 next:
 730                 resource_list_del(entry);
 731                 if (free)
 732                         resource_list_free_entry(entry);
 733                 else
 734                         resource_list_add_tail(entry, resources);
 735         }
 736 }
 737
 738 static void acpi_pci_root_remap_iospace(struct fwnode_handle *fwnode,
 739                         struct resource_entry *entry)
 740 {
 741 #ifdef PCI_IOBASE
 742         struct resource *res = entry->res;
 743         resource_size_t cpu_addr = res->start;
 744         resource_size_t pci_addr = cpu_addr - entry->offset;
 745         resource_size_t length = resource_size(res);
 746         unsigned long port;
 747
 748         if (pci_register_io_range(fwnode, cpu_addr, length))
 749                 goto err;
 750
 751         port = pci_address_to_pio(cpu_addr);
 752         if (port == (unsigned long)-1)
 753                 goto err;
 754
 755         res->start = port;
 756         res->end = port + length - 1;
 757         entry->offset = port - pci_addr;
 758
 759         if (pci_remap_iospace(res, cpu_addr) < 0)
 760                 goto err;
 761
 762         pr_info("Remapped I/O %pa to %pR\n", &cpu_addr, res);
 763         return;
 764 err:
 765         res->flags |= IORESOURCE_DISABLED;
 766 #endif
 767 }
 768
 769 int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info)
 770 {
 771         int ret;
 772         struct list_head *list = &info->resources;
 773         struct acpi_device *device = info->bridge;
 774         struct resource_entry *entry, *tmp;
 775         unsigned long flags;
 776
 777         flags = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT;
 778         ret = acpi_dev_get_resources(device, list,
 779                                      acpi_dev_filter_resource_type_cb,
 780                                      (void *)flags);
 781         if (ret < 0)
 782                 dev_warn(&device->dev,
 783                          "failed to parse _CRS method, error code %d\n", ret);
 784         else if (ret == 0)
 785                 dev_dbg(&device->dev,
 786                         "no IO and memory resources present in _CRS\n");
 787         else {
 788                 resource_list_for_each_entry_safe(entry, tmp, list) {
 789                         if (entry->res->flags & IORESOURCE_IO)
 790                                 acpi_pci_root_remap_iospace(&device->fwnode,
 791                                                 entry);
 792
 793                         if (entry->res->flags & IORESOURCE_DISABLED)
 794                                 resource_list_destroy_entry(entry);
 795                         else
 796                                 entry->res->name = info->name;
 797                 }
 798                 acpi_pci_root_validate_resources(&device->dev, list,
 799                                                  IORESOURCE_MEM);
 800                 acpi_pci_root_validate_resources(&device->dev, list,
 801                                                  IORESOURCE_IO);
 802         }
 803
 804         return ret;
 805 }
 806
 807 static void pci_acpi_root_add_resources(struct acpi_pci_root_info *info)
 808 {
 809         struct resource_entry *entry, *tmp;
 810         struct resource *res, *conflict, *root = NULL;
 811
 812         resource_list_for_each_entry_safe(entry, tmp, &info->resources) {
 813                 res = entry->res;
 814                 if (res->flags & IORESOURCE_MEM)
 815                         root = &iomem_resource;
 816                 else if (res->flags & IORESOURCE_IO)
 817                         root = &ioport_resource;
 818                 else
 819                         continue;
 820
 821                 /*
 822                  * Some legacy x86 host bridge drivers use iomem_resource and
 823                  * ioport_resource as default resource pool, skip it.
 824                  */
 825                 if (res == root)
 826                         continue;
 827
 828                 conflict = insert_resource_conflict(root, res);
 829                 if (conflict) {
 830                         dev_info(&info->bridge->dev,
 831                                  "ignoring host bridge window %pR (conflicts with %s %pR)\n",
 832                                  res, conflict->name, conflict);
 833                         resource_list_destroy_entry(entry);
 834                 }
 835         }
 836 }
 837
 838 static void __acpi_pci_root_release_info(struct acpi_pci_root_info *info)
 839 {
 840         struct resource *res;
 841         struct resource_entry *entry, *tmp;
 842
 843         if (!info)
 844                 return;
 845
 846         resource_list_for_each_entry_safe(entry, tmp, &info->resources) {
 847                 res = entry->res;
 848                 if (res->parent &&
 849                     (res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
 850                         release_resource(res);
 851                 resource_list_destroy_entry(entry);
 852         }
 853
 854         info->ops->release_info(info);
 855 }
 856
 857 static void acpi_pci_root_release_info(struct pci_host_bridge *bridge)
 858 {
 859         struct resource *res;
 860         struct resource_entry *entry;
 861
 862         resource_list_for_each_entry(entry, &bridge->windows) {
 863                 res = entry->res;
 864                 if (res->flags & IORESOURCE_IO)
 865                         pci_unmap_iospace(res);
 866                 if (res->parent &&
 867                     (res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
 868                         release_resource(res);
 869         }
 870         __acpi_pci_root_release_info(bridge->release_data);
 871 }
 872
 873 struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
 874                                      struct acpi_pci_root_ops *ops,
 875                                      struct acpi_pci_root_info *info,
 876                                      void *sysdata)
 877 {
 878         int ret, busnum = root->secondary.start;
 879         struct acpi_device *device = root->device;
 880         int node = acpi_get_node(device->handle);
 881         struct pci_bus *bus;
 882         struct pci_host_bridge *host_bridge;
 883         union acpi_object *obj;
 884
 885         info->root = root;
 886         info->bridge = device;
 887         info->ops = ops;
 888         INIT_LIST_HEAD(&info->resources);
 889         snprintf(info->name, sizeof(info->name), "PCI Bus %04x:%02x",
 890                  root->segment, busnum);
 891
 892         if (ops->init_info && ops->init_info(info))
 893                 goto out_release_info;
 894         if (ops->prepare_resources)
 895                 ret = ops->prepare_resources(info);
 896         else
 897                 ret = acpi_pci_probe_root_resources(info);
 898         if (ret < 0)
 899                 goto out_release_info;
 900
 901         pci_acpi_root_add_resources(info);
 902         pci_add_resource(&info->resources, &root->secondary);
 903         bus = pci_create_root_bus(NULL, busnum, ops->pci_ops,
 904                                   sysdata, &info->resources);
 905         if (!bus)
 906                 goto out_release_info;
 907
 908         host_bridge = to_pci_host_bridge(bus->bridge);
 909         if (!(root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
 910                 host_bridge->native_pcie_hotplug = 0;
 911         if (!(root->osc_control_set & OSC_PCI_SHPC_NATIVE_HP_CONTROL))
 912                 host_bridge->native_shpc_hotplug = 0;
 913         if (!(root->osc_control_set & OSC_PCI_EXPRESS_AER_CONTROL))
 914                 host_bridge->native_aer = 0;
 915         if (!(root->osc_control_set & OSC_PCI_EXPRESS_PME_CONTROL))
 916                 host_bridge->native_pme = 0;
 917         if (!(root->osc_control_set & OSC_PCI_EXPRESS_LTR_CONTROL))
 918                 host_bridge->native_ltr = 0;
 919
 920         /*
 921          * Evaluate the "PCI Boot Configuration" _DSM Function.  If it
 922          * exists and returns 0, we must preserve any PCI resource
 923          * assignments made by firmware for this host bridge.
 924          */
 925         obj = acpi_evaluate_dsm(ACPI_HANDLE(bus->bridge), &pci_acpi_dsm_guid, 1,
 926                                 IGNORE_PCI_BOOT_CONFIG_DSM, NULL);
 927         if (obj && obj->type == ACPI_TYPE_INTEGER && obj->integer.value == 0)
 928                 host_bridge->preserve_config = 1;
 929         ACPI_FREE(obj);
 930
 931         pci_scan_child_bus(bus);
 932         pci_set_host_bridge_release(host_bridge, acpi_pci_root_release_info,
 933                                     info);
 934         if (node != NUMA_NO_NODE)
 935                 dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
 936         return bus;
 937
 938 out_release_info:
 939         __acpi_pci_root_release_info(info);
 940         return NULL;
 941 }
 942
 943 void __init acpi_pci_root_init(void)
 944 {
 945         acpi_hest_init();
 946         if (acpi_pci_disabled)
 947                 return;
 948
 949         pci_acpi_crs_quirks();
 950         acpi_scan_add_handler_with_hotplug(&pci_root_handler, "pci_root");
 951 }