drivers/acpi/acpica/hwtimer.c

   1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
   2 /******************************************************************************
   3  *
   4  * Name: hwtimer.c - ACPI Power Management Timer Interface
   5  *
   6  * Copyright (C) 2000 - 2019, Intel Corp.
   7  *
   8  *****************************************************************************/
   9
  10 #define EXPORT_ACPI_INTERFACES
  11
  12 #include <acpi/acpi.h>
  13 #include "accommon.h"
  14
  15 #define _COMPONENT          ACPI_HARDWARE
  16 ACPI_MODULE_NAME("hwtimer")
  17
  18 #if (!ACPI_REDUCED_HARDWARE)    /* Entire module */
  19 /******************************************************************************
  20  *
  21  * FUNCTION:    acpi_get_timer_resolution
  22  *
  23  * PARAMETERS:  resolution          - Where the resolution is returned
  24  *
  25  * RETURN:      Status and timer resolution
  26  *
  27  * DESCRIPTION: Obtains resolution of the ACPI PM Timer (24 or 32 bits).
  28  *
  29  ******************************************************************************/
  30 acpi_status acpi_get_timer_resolution(u32 * resolution)
  31 {
  32         ACPI_FUNCTION_TRACE(acpi_get_timer_resolution);
  33
  34         if (!resolution) {
  35                 return_ACPI_STATUS(AE_BAD_PARAMETER);
  36         }
  37
  38         if ((acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) == 0) {
  39                 *resolution = 24;
  40         } else {
  41                 *resolution = 32;
  42         }
  43
  44         return_ACPI_STATUS(AE_OK);
  45 }
  46
  47 ACPI_EXPORT_SYMBOL(acpi_get_timer_resolution)
  48
  49 /******************************************************************************
  50  *
  51  * FUNCTION:    acpi_get_timer
  52  *
  53  * PARAMETERS:  ticks               - Where the timer value is returned
  54  *
  55  * RETURN:      Status and current timer value (ticks)
  56  *
  57  * DESCRIPTION: Obtains current value of ACPI PM Timer (in ticks).
  58  *
  59  ******************************************************************************/
  60 acpi_status acpi_get_timer(u32 * ticks)
  61 {
  62         acpi_status status;
  63         u64 timer_value;
  64
  65         ACPI_FUNCTION_TRACE(acpi_get_timer);
  66
  67         if (!ticks) {
  68                 return_ACPI_STATUS(AE_BAD_PARAMETER);
  69         }
  70
  71         /* ACPI 5.0A: PM Timer is optional */
  72
  73         if (!acpi_gbl_FADT.xpm_timer_block.address) {
  74                 return_ACPI_STATUS(AE_SUPPORT);
  75         }
  76
  77         status = acpi_hw_read(&timer_value, &acpi_gbl_FADT.xpm_timer_block);
  78         if (ACPI_SUCCESS(status)) {
  79
  80                 /* ACPI PM Timer is defined to be 32 bits (PM_TMR_LEN) */
  81
  82                 *ticks = (u32)timer_value;
  83         }
  84
  85         return_ACPI_STATUS(status);
  86 }
  87
  88 ACPI_EXPORT_SYMBOL(acpi_get_timer)
  89
  90 /******************************************************************************
  91  *
  92  * FUNCTION:    acpi_get_timer_duration
  93  *
  94  * PARAMETERS:  start_ticks         - Starting timestamp
  95  *              end_ticks           - End timestamp
  96  *              time_elapsed        - Where the elapsed time is returned
  97  *
  98  * RETURN:      Status and time_elapsed
  99  *
 100  * DESCRIPTION: Computes the time elapsed (in microseconds) between two
 101  *              PM Timer time stamps, taking into account the possibility of
 102  *              rollovers, the timer resolution, and timer frequency.
 103  *
 104  *              The PM Timer's clock ticks at roughly 3.6 times per
 105  *              _microsecond_, and its clock continues through Cx state
 106  *              transitions (unlike many CPU timestamp counters) -- making it
 107  *              a versatile and accurate timer.
 108  *
 109  *              Note that this function accommodates only a single timer
 110  *              rollover. Thus for 24-bit timers, this function should only
 111  *              be used for calculating durations less than ~4.6 seconds
 112  *              (~20 minutes for 32-bit timers) -- calculations below:
 113  *
 114  *              2**24 Ticks / 3,600,000 Ticks/Sec = 4.66 sec
 115  *              2**32 Ticks / 3,600,000 Ticks/Sec = 1193 sec or 19.88 minutes
 116  *
 117  ******************************************************************************/
 118 acpi_status
 119 acpi_get_timer_duration(u32 start_ticks, u32 end_ticks, u32 *time_elapsed)
 120 {
 121         acpi_status status;
 122         u64 delta_ticks;
 123         u64 quotient;
 124
 125         ACPI_FUNCTION_TRACE(acpi_get_timer_duration);
 126
 127         if (!time_elapsed) {
 128                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 129         }
 130
 131         /* ACPI 5.0A: PM Timer is optional */
 132
 133         if (!acpi_gbl_FADT.xpm_timer_block.address) {
 134                 return_ACPI_STATUS(AE_SUPPORT);
 135         }
 136
 137         if (start_ticks == end_ticks) {
 138                 *time_elapsed = 0;
 139                 return_ACPI_STATUS(AE_OK);
 140         }
 141
 142         /*
 143          * Compute Tick Delta:
 144          * Handle (max one) timer rollovers on 24-bit versus 32-bit timers.
 145          */
 146         delta_ticks = end_ticks;
 147         if (start_ticks > end_ticks) {
 148                 if ((acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) == 0) {
 149
 150                         /* 24-bit Timer */
 151
 152                         delta_ticks |= (u64)1 << 24;
 153                 } else {
 154                         /* 32-bit Timer */
 155
 156                         delta_ticks |= (u64)1 << 32;
 157                 }
 158         }
 159         delta_ticks -= start_ticks;
 160
 161         /*
 162          * Compute Duration (Requires a 64-bit multiply and divide):
 163          *
 164          * time_elapsed (microseconds) =
 165          *  (delta_ticks * ACPI_USEC_PER_SEC) / ACPI_PM_TIMER_FREQUENCY;
 166          */
 167         status = acpi_ut_short_divide(delta_ticks * ACPI_USEC_PER_SEC,
 168                                       ACPI_PM_TIMER_FREQUENCY, &quotient, NULL);
 169
 170         *time_elapsed = (u32)quotient;
 171         return_ACPI_STATUS(status);
 172 }
 173
 174 ACPI_EXPORT_SYMBOL(acpi_get_timer_duration)
 175 #endif                          /* !ACPI_REDUCED_HARDWARE */