drivers/acpi/acpica/exregion.c

   1 /******************************************************************************
   2  *
   3  * Module Name: exregion - ACPI default op_region (address space) handlers
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2014, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acinterp.h"
  47
  48 #define _COMPONENT          ACPI_EXECUTER
  49 ACPI_MODULE_NAME("exregion")
  50
  51 /*******************************************************************************
  52  *
  53  * FUNCTION:    acpi_ex_system_memory_space_handler
  54  *
  55  * PARAMETERS:  function            - Read or Write operation
  56  *              address             - Where in the space to read or write
  57  *              bit_width           - Field width in bits (8, 16, or 32)
  58  *              value               - Pointer to in or out value
  59  *              handler_context     - Pointer to Handler's context
  60  *              region_context      - Pointer to context specific to the
  61  *                                    accessed region
  62  *
  63  * RETURN:      Status
  64  *
  65  * DESCRIPTION: Handler for the System Memory address space (Op Region)
  66  *
  67  ******************************************************************************/
  68 acpi_status
  69 acpi_ex_system_memory_space_handler(u32 function,
  70                                     acpi_physical_address address,
  71                                     u32 bit_width,
  72                                     u64 *value,
  73                                     void *handler_context, void *region_context)
  74 {
  75         acpi_status status = AE_OK;
  76         void *logical_addr_ptr = NULL;
  77         struct acpi_mem_space_context *mem_info = region_context;
  78         u32 length;
  79         acpi_size map_length;
  80         acpi_size page_boundary_map_length;
  81 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
  82         u32 remainder;
  83 #endif
  84
  85         ACPI_FUNCTION_TRACE(ex_system_memory_space_handler);
  86
  87         /* Validate and translate the bit width */
  88
  89         switch (bit_width) {
  90         case 8:
  91
  92                 length = 1;
  93                 break;
  94
  95         case 16:
  96
  97                 length = 2;
  98                 break;
  99
 100         case 32:
 101
 102                 length = 4;
 103                 break;
 104
 105         case 64:
 106
 107                 length = 8;
 108                 break;
 109
 110         default:
 111
 112                 ACPI_ERROR((AE_INFO, "Invalid SystemMemory width %u",
 113                             bit_width));
 114                 return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
 115         }
 116
 117 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
 118         /*
 119          * Hardware does not support non-aligned data transfers, we must verify
 120          * the request.
 121          */
 122         (void)acpi_ut_short_divide((u64) address, length, NULL, &remainder);
 123         if (remainder != 0) {
 124                 return_ACPI_STATUS(AE_AML_ALIGNMENT);
 125         }
 126 #endif
 127
 128         /*
 129          * Does the request fit into the cached memory mapping?
 130          * Is 1) Address below the current mapping? OR
 131          *    2) Address beyond the current mapping?
 132          */
 133         if ((address < mem_info->mapped_physical_address) ||
 134             (((u64) address + length) > ((u64)
 135                                          mem_info->mapped_physical_address +
 136                                          mem_info->mapped_length))) {
 137                 /*
 138                  * The request cannot be resolved by the current memory mapping;
 139                  * Delete the existing mapping and create a new one.
 140                  */
 141                 if (mem_info->mapped_length) {
 142
 143                         /* Valid mapping, delete it */
 144
 145                         acpi_os_unmap_memory(mem_info->mapped_logical_address,
 146                                              mem_info->mapped_length);
 147                 }
 148
 149                 /*
 150                  * October 2009: Attempt to map from the requested address to the
 151                  * end of the region. However, we will never map more than one
 152                  * page, nor will we cross a page boundary.
 153                  */
 154                 map_length = (acpi_size)
 155                     ((mem_info->address + mem_info->length) - address);
 156
 157                 /*
 158                  * If mapping the entire remaining portion of the region will cross
 159                  * a page boundary, just map up to the page boundary, do not cross.
 160                  * On some systems, crossing a page boundary while mapping regions
 161                  * can cause warnings if the pages have different attributes
 162                  * due to resource management.
 163                  *
 164                  * This has the added benefit of constraining a single mapping to
 165                  * one page, which is similar to the original code that used a 4k
 166                  * maximum window.
 167                  */
 168                 page_boundary_map_length =
 169                     ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address;
 170                 if (page_boundary_map_length == 0) {
 171                         page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE;
 172                 }
 173
 174                 if (map_length > page_boundary_map_length) {
 175                         map_length = page_boundary_map_length;
 176                 }
 177
 178                 /* Create a new mapping starting at the address given */
 179
 180                 mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length);
 181                 if (!mem_info->mapped_logical_address) {
 182                         ACPI_ERROR((AE_INFO,
 183                                     "Could not map memory at 0x%8.8X%8.8X, size %u",
 184                                     ACPI_FORMAT_UINT64(address),
 185                                     (u32) map_length));
 186                         mem_info->mapped_length = 0;
 187                         return_ACPI_STATUS(AE_NO_MEMORY);
 188                 }
 189
 190                 /* Save the physical address and mapping size */
 191
 192                 mem_info->mapped_physical_address = address;
 193                 mem_info->mapped_length = map_length;
 194         }
 195
 196         /*
 197          * Generate a logical pointer corresponding to the address we want to
 198          * access
 199          */
 200         logical_addr_ptr = mem_info->mapped_logical_address +
 201             ((u64) address - (u64) mem_info->mapped_physical_address);
 202
 203         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 204                           "System-Memory (width %u) R/W %u Address=%8.8X%8.8X\n",
 205                           bit_width, function, ACPI_FORMAT_UINT64(address)));
 206
 207         /*
 208          * Perform the memory read or write
 209          *
 210          * Note: For machines that do not support non-aligned transfers, the target
 211          * address was checked for alignment above. We do not attempt to break the
 212          * transfer up into smaller (byte-size) chunks because the AML specifically
 213          * asked for a transfer width that the hardware may require.
 214          */
 215         switch (function) {
 216         case ACPI_READ:
 217
 218                 *value = 0;
 219                 switch (bit_width) {
 220                 case 8:
 221
 222                         *value = (u64)ACPI_GET8(logical_addr_ptr);
 223                         break;
 224
 225                 case 16:
 226
 227                         *value = (u64)ACPI_GET16(logical_addr_ptr);
 228                         break;
 229
 230                 case 32:
 231
 232                         *value = (u64)ACPI_GET32(logical_addr_ptr);
 233                         break;
 234
 235                 case 64:
 236
 237                         *value = (u64)ACPI_GET64(logical_addr_ptr);
 238                         break;
 239
 240                 default:
 241
 242                         /* bit_width was already validated */
 243
 244                         break;
 245                 }
 246                 break;
 247
 248         case ACPI_WRITE:
 249
 250                 switch (bit_width) {
 251                 case 8:
 252
 253                         ACPI_SET8(logical_addr_ptr, *value);
 254                         break;
 255
 256                 case 16:
 257
 258                         ACPI_SET16(logical_addr_ptr, *value);
 259                         break;
 260
 261                 case 32:
 262
 263                         ACPI_SET32(logical_addr_ptr, *value);
 264                         break;
 265
 266                 case 64:
 267
 268                         ACPI_SET64(logical_addr_ptr, *value);
 269                         break;
 270
 271                 default:
 272
 273                         /* bit_width was already validated */
 274
 275                         break;
 276                 }
 277                 break;
 278
 279         default:
 280
 281                 status = AE_BAD_PARAMETER;
 282                 break;
 283         }
 284
 285         return_ACPI_STATUS(status);
 286 }
 287
 288 /*******************************************************************************
 289  *
 290  * FUNCTION:    acpi_ex_system_io_space_handler
 291  *
 292  * PARAMETERS:  function            - Read or Write operation
 293  *              address             - Where in the space to read or write
 294  *              bit_width           - Field width in bits (8, 16, or 32)
 295  *              value               - Pointer to in or out value
 296  *              handler_context     - Pointer to Handler's context
 297  *              region_context      - Pointer to context specific to the
 298  *                                    accessed region
 299  *
 300  * RETURN:      Status
 301  *
 302  * DESCRIPTION: Handler for the System IO address space (Op Region)
 303  *
 304  ******************************************************************************/
 305
 306 acpi_status
 307 acpi_ex_system_io_space_handler(u32 function,
 308                                 acpi_physical_address address,
 309                                 u32 bit_width,
 310                                 u64 *value,
 311                                 void *handler_context, void *region_context)
 312 {
 313         acpi_status status = AE_OK;
 314         u32 value32;
 315
 316         ACPI_FUNCTION_TRACE(ex_system_io_space_handler);
 317
 318         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 319                           "System-IO (width %u) R/W %u Address=%8.8X%8.8X\n",
 320                           bit_width, function, ACPI_FORMAT_UINT64(address)));
 321
 322         /* Decode the function parameter */
 323
 324         switch (function) {
 325         case ACPI_READ:
 326
 327                 status = acpi_hw_read_port((acpi_io_address) address,
 328                                            &value32, bit_width);
 329                 *value = value32;
 330                 break;
 331
 332         case ACPI_WRITE:
 333
 334                 status = acpi_hw_write_port((acpi_io_address) address,
 335                                             (u32) * value, bit_width);
 336                 break;
 337
 338         default:
 339
 340                 status = AE_BAD_PARAMETER;
 341                 break;
 342         }
 343
 344         return_ACPI_STATUS(status);
 345 }
 346
 347 /*******************************************************************************
 348  *
 349  * FUNCTION:    acpi_ex_pci_config_space_handler
 350  *
 351  * PARAMETERS:  function            - Read or Write operation
 352  *              address             - Where in the space to read or write
 353  *              bit_width           - Field width in bits (8, 16, or 32)
 354  *              value               - Pointer to in or out value
 355  *              handler_context     - Pointer to Handler's context
 356  *              region_context      - Pointer to context specific to the
 357  *                                    accessed region
 358  *
 359  * RETURN:      Status
 360  *
 361  * DESCRIPTION: Handler for the PCI Config address space (Op Region)
 362  *
 363  ******************************************************************************/
 364
 365 acpi_status
 366 acpi_ex_pci_config_space_handler(u32 function,
 367                                  acpi_physical_address address,
 368                                  u32 bit_width,
 369                                  u64 *value,
 370                                  void *handler_context, void *region_context)
 371 {
 372         acpi_status status = AE_OK;
 373         struct acpi_pci_id *pci_id;
 374         u16 pci_register;
 375
 376         ACPI_FUNCTION_TRACE(ex_pci_config_space_handler);
 377
 378         /*
 379          *  The arguments to acpi_os(Read|Write)pci_configuration are:
 380          *
 381          *  pci_segment is the PCI bus segment range 0-31
 382          *  pci_bus     is the PCI bus number range 0-255
 383          *  pci_device  is the PCI device number range 0-31
 384          *  pci_function is the PCI device function number
 385          *  pci_register is the Config space register range 0-255 bytes
 386          *
 387          *  value - input value for write, output address for read
 388          *
 389          */
 390         pci_id = (struct acpi_pci_id *)region_context;
 391         pci_register = (u16) (u32) address;
 392
 393         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 394                           "Pci-Config %u (%u) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n",
 395                           function, bit_width, pci_id->segment, pci_id->bus,
 396                           pci_id->device, pci_id->function, pci_register));
 397
 398         switch (function) {
 399         case ACPI_READ:
 400
 401                 *value = 0;
 402                 status = acpi_os_read_pci_configuration(pci_id, pci_register,
 403                                                         value, bit_width);
 404                 break;
 405
 406         case ACPI_WRITE:
 407
 408                 status = acpi_os_write_pci_configuration(pci_id, pci_register,
 409                                                          *value, bit_width);
 410                 break;
 411
 412         default:
 413
 414                 status = AE_BAD_PARAMETER;
 415                 break;
 416         }
 417
 418         return_ACPI_STATUS(status);
 419 }
 420
 421 /*******************************************************************************
 422  *
 423  * FUNCTION:    acpi_ex_cmos_space_handler
 424  *
 425  * PARAMETERS:  function            - Read or Write operation
 426  *              address             - Where in the space to read or write
 427  *              bit_width           - Field width in bits (8, 16, or 32)
 428  *              value               - Pointer to in or out value
 429  *              handler_context     - Pointer to Handler's context
 430  *              region_context      - Pointer to context specific to the
 431  *                                    accessed region
 432  *
 433  * RETURN:      Status
 434  *
 435  * DESCRIPTION: Handler for the CMOS address space (Op Region)
 436  *
 437  ******************************************************************************/
 438
 439 acpi_status
 440 acpi_ex_cmos_space_handler(u32 function,
 441                            acpi_physical_address address,
 442                            u32 bit_width,
 443                            u64 *value,
 444                            void *handler_context, void *region_context)
 445 {
 446         acpi_status status = AE_OK;
 447
 448         ACPI_FUNCTION_TRACE(ex_cmos_space_handler);
 449
 450         return_ACPI_STATUS(status);
 451 }
 452
 453 /*******************************************************************************
 454  *
 455  * FUNCTION:    acpi_ex_pci_bar_space_handler
 456  *
 457  * PARAMETERS:  function            - Read or Write operation
 458  *              address             - Where in the space to read or write
 459  *              bit_width           - Field width in bits (8, 16, or 32)
 460  *              value               - Pointer to in or out value
 461  *              handler_context     - Pointer to Handler's context
 462  *              region_context      - Pointer to context specific to the
 463  *                                    accessed region
 464  *
 465  * RETURN:      Status
 466  *
 467  * DESCRIPTION: Handler for the PCI bar_target address space (Op Region)
 468  *
 469  ******************************************************************************/
 470
 471 acpi_status
 472 acpi_ex_pci_bar_space_handler(u32 function,
 473                               acpi_physical_address address,
 474                               u32 bit_width,
 475                               u64 *value,
 476                               void *handler_context, void *region_context)
 477 {
 478         acpi_status status = AE_OK;
 479
 480         ACPI_FUNCTION_TRACE(ex_pci_bar_space_handler);
 481
 482         return_ACPI_STATUS(status);
 483 }
 484
 485 /*******************************************************************************
 486  *
 487  * FUNCTION:    acpi_ex_data_table_space_handler
 488  *
 489  * PARAMETERS:  function            - Read or Write operation
 490  *              address             - Where in the space to read or write
 491  *              bit_width           - Field width in bits (8, 16, or 32)
 492  *              value               - Pointer to in or out value
 493  *              handler_context     - Pointer to Handler's context
 494  *              region_context      - Pointer to context specific to the
 495  *                                    accessed region
 496  *
 497  * RETURN:      Status
 498  *
 499  * DESCRIPTION: Handler for the Data Table address space (Op Region)
 500  *
 501  ******************************************************************************/
 502
 503 acpi_status
 504 acpi_ex_data_table_space_handler(u32 function,
 505                                  acpi_physical_address address,
 506                                  u32 bit_width,
 507                                  u64 *value,
 508                                  void *handler_context, void *region_context)
 509 {
 510         ACPI_FUNCTION_TRACE(ex_data_table_space_handler);
 511
 512         /*
 513          * Perform the memory read or write. The bit_width was already
 514          * validated.
 515          */
 516         switch (function) {
 517         case ACPI_READ:
 518
 519                 ACPI_MEMCPY(ACPI_CAST_PTR(char, value),
 520                             ACPI_PHYSADDR_TO_PTR(address),
 521                             ACPI_DIV_8(bit_width));
 522                 break;
 523
 524         case ACPI_WRITE:
 525
 526                 ACPI_MEMCPY(ACPI_PHYSADDR_TO_PTR(address),
 527                             ACPI_CAST_PTR(char, value), ACPI_DIV_8(bit_width));
 528                 break;
 529
 530         default:
 531
 532                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 533         }
 534
 535         return_ACPI_STATUS(AE_OK);
 536 }