drivers/acpi/acpica/dswload.c

   1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
   2 /******************************************************************************
   3  *
   4  * Module Name: dswload - Dispatcher first pass namespace load callbacks
   5  *
   6  * Copyright (C) 2000 - 2019, Intel Corp.
   7  *
   8  *****************************************************************************/
   9
  10 #include <acpi/acpi.h>
  11 #include "accommon.h"
  12 #include "acparser.h"
  13 #include "amlcode.h"
  14 #include "acdispat.h"
  15 #include "acinterp.h"
  16 #include "acnamesp.h"
  17
  18 #ifdef ACPI_ASL_COMPILER
  19 #include "acdisasm.h"
  20 #endif
  21
  22 #define _COMPONENT          ACPI_DISPATCHER
  23 ACPI_MODULE_NAME("dswload")
  24
  25 /*******************************************************************************
  26  *
  27  * FUNCTION:    acpi_ds_init_callbacks
  28  *
  29  * PARAMETERS:  walk_state      - Current state of the parse tree walk
  30  *              pass_number     - 1, 2, or 3
  31  *
  32  * RETURN:      Status
  33  *
  34  * DESCRIPTION: Init walk state callbacks
  35  *
  36  ******************************************************************************/
  37 acpi_status
  38 acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number)
  39 {
  40
  41         switch (pass_number) {
  42         case 0:
  43
  44                 /* Parse only - caller will setup callbacks */
  45
  46                 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
  47                     ACPI_PARSE_DELETE_TREE | ACPI_PARSE_DISASSEMBLE;
  48                 walk_state->descending_callback = NULL;
  49                 walk_state->ascending_callback = NULL;
  50                 break;
  51
  52         case 1:
  53
  54                 /* Load pass 1 */
  55
  56                 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
  57                     ACPI_PARSE_DELETE_TREE;
  58                 walk_state->descending_callback = acpi_ds_load1_begin_op;
  59                 walk_state->ascending_callback = acpi_ds_load1_end_op;
  60                 break;
  61
  62         case 2:
  63
  64                 /* Load pass 2 */
  65
  66                 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
  67                     ACPI_PARSE_DELETE_TREE;
  68                 walk_state->descending_callback = acpi_ds_load2_begin_op;
  69                 walk_state->ascending_callback = acpi_ds_load2_end_op;
  70                 break;
  71
  72         case 3:
  73
  74                 /* Execution pass */
  75
  76                 walk_state->parse_flags |= ACPI_PARSE_EXECUTE |
  77                     ACPI_PARSE_DELETE_TREE;
  78                 walk_state->descending_callback = acpi_ds_exec_begin_op;
  79                 walk_state->ascending_callback = acpi_ds_exec_end_op;
  80                 break;
  81
  82         default:
  83
  84                 return (AE_BAD_PARAMETER);
  85         }
  86
  87         return (AE_OK);
  88 }
  89
  90 /*******************************************************************************
  91  *
  92  * FUNCTION:    acpi_ds_load1_begin_op
  93  *
  94  * PARAMETERS:  walk_state      - Current state of the parse tree walk
  95  *              out_op          - Where to return op if a new one is created
  96  *
  97  * RETURN:      Status
  98  *
  99  * DESCRIPTION: Descending callback used during the loading of ACPI tables.
 100  *
 101  ******************************************************************************/
 102
 103 acpi_status
 104 acpi_ds_load1_begin_op(struct acpi_walk_state *walk_state,
 105                        union acpi_parse_object **out_op)
 106 {
 107         union acpi_parse_object *op;
 108         struct acpi_namespace_node *node;
 109         acpi_status status;
 110         acpi_object_type object_type;
 111         char *path;
 112         u32 flags;
 113
 114         ACPI_FUNCTION_TRACE_PTR(ds_load1_begin_op, walk_state->op);
 115
 116         op = walk_state->op;
 117         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
 118                           walk_state));
 119
 120         /* We are only interested in opcodes that have an associated name */
 121
 122         if (op) {
 123                 if (!(walk_state->op_info->flags & AML_NAMED)) {
 124                         *out_op = op;
 125                         return_ACPI_STATUS(AE_OK);
 126                 }
 127
 128                 /* Check if this object has already been installed in the namespace */
 129
 130                 if (op->common.node) {
 131                         *out_op = op;
 132                         return_ACPI_STATUS(AE_OK);
 133                 }
 134         }
 135
 136         path = acpi_ps_get_next_namestring(&walk_state->parser_state);
 137
 138         /* Map the raw opcode into an internal object type */
 139
 140         object_type = walk_state->op_info->object_type;
 141
 142         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 143                           "State=%p Op=%p [%s]\n", walk_state, op,
 144                           acpi_ut_get_type_name(object_type)));
 145
 146         switch (walk_state->opcode) {
 147         case AML_SCOPE_OP:
 148                 /*
 149                  * The target name of the Scope() operator must exist at this point so
 150                  * that we can actually open the scope to enter new names underneath it.
 151                  * Allow search-to-root for single namesegs.
 152                  */
 153                 status =
 154                     acpi_ns_lookup(walk_state->scope_info, path, object_type,
 155                                    ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
 156                                    walk_state, &(node));
 157 #ifdef ACPI_ASL_COMPILER
 158                 if (status == AE_NOT_FOUND) {
 159                         /*
 160                          * Table disassembly:
 161                          * Target of Scope() not found. Generate an External for it, and
 162                          * insert the name into the namespace.
 163                          */
 164                         acpi_dm_add_op_to_external_list(op, path,
 165                                                         ACPI_TYPE_DEVICE, 0, 0);
 166                         status =
 167                             acpi_ns_lookup(walk_state->scope_info, path,
 168                                            object_type, ACPI_IMODE_LOAD_PASS1,
 169                                            ACPI_NS_SEARCH_PARENT, walk_state,
 170                                            &node);
 171                 }
 172 #endif
 173                 if (ACPI_FAILURE(status)) {
 174                         ACPI_ERROR_NAMESPACE(walk_state->scope_info, path,
 175                                              status);
 176                         return_ACPI_STATUS(status);
 177                 }
 178
 179                 /*
 180                  * Check to make sure that the target is
 181                  * one of the opcodes that actually opens a scope
 182                  */
 183                 switch (node->type) {
 184                 case ACPI_TYPE_ANY:
 185                 case ACPI_TYPE_LOCAL_SCOPE:     /* Scope  */
 186                 case ACPI_TYPE_DEVICE:
 187                 case ACPI_TYPE_POWER:
 188                 case ACPI_TYPE_PROCESSOR:
 189                 case ACPI_TYPE_THERMAL:
 190
 191                         /* These are acceptable types */
 192                         break;
 193
 194                 case ACPI_TYPE_INTEGER:
 195                 case ACPI_TYPE_STRING:
 196                 case ACPI_TYPE_BUFFER:
 197                         /*
 198                          * These types we will allow, but we will change the type.
 199                          * This enables some existing code of the form:
 200                          *
 201                          *  Name (DEB, 0)
 202                          *  Scope (DEB) { ... }
 203                          *
 204                          * Note: silently change the type here. On the second pass,
 205                          * we will report a warning
 206                          */
 207                         ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 208                                           "Type override - [%4.4s] had invalid type (%s) "
 209                                           "for Scope operator, changed to type ANY\n",
 210                                           acpi_ut_get_node_name(node),
 211                                           acpi_ut_get_type_name(node->type)));
 212
 213                         node->type = ACPI_TYPE_ANY;
 214                         walk_state->scope_info->common.value = ACPI_TYPE_ANY;
 215                         break;
 216
 217                 case ACPI_TYPE_METHOD:
 218                         /*
 219                          * Allow scope change to root during execution of module-level
 220                          * code. Root is typed METHOD during this time.
 221                          */
 222                         if ((node == acpi_gbl_root_node) &&
 223                             (walk_state->
 224                              parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
 225                                 break;
 226                         }
 227
 228                         /*lint -fallthrough */
 229
 230                 default:
 231
 232                         /* All other types are an error */
 233
 234                         ACPI_ERROR((AE_INFO,
 235                                     "Invalid type (%s) for target of "
 236                                     "Scope operator [%4.4s] (Cannot override)",
 237                                     acpi_ut_get_type_name(node->type),
 238                                     acpi_ut_get_node_name(node)));
 239
 240                         return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 241                 }
 242                 break;
 243
 244         default:
 245                 /*
 246                  * For all other named opcodes, we will enter the name into
 247                  * the namespace.
 248                  *
 249                  * Setup the search flags.
 250                  * Since we are entering a name into the namespace, we do not want to
 251                  * enable the search-to-root upsearch.
 252                  *
 253                  * There are only two conditions where it is acceptable that the name
 254                  * already exists:
 255                  *    1) the Scope() operator can reopen a scoping object that was
 256                  *       previously defined (Scope, Method, Device, etc.)
 257                  *    2) Whenever we are parsing a deferred opcode (op_region, Buffer,
 258                  *       buffer_field, or Package), the name of the object is already
 259                  *       in the namespace.
 260                  */
 261                 if (walk_state->deferred_node) {
 262
 263                         /* This name is already in the namespace, get the node */
 264
 265                         node = walk_state->deferred_node;
 266                         status = AE_OK;
 267                         break;
 268                 }
 269
 270                 /*
 271                  * If we are executing a method, do not create any namespace objects
 272                  * during the load phase, only during execution.
 273                  */
 274                 if (walk_state->method_node) {
 275                         node = NULL;
 276                         status = AE_OK;
 277                         break;
 278                 }
 279
 280                 flags = ACPI_NS_NO_UPSEARCH;
 281                 if ((walk_state->opcode != AML_SCOPE_OP) &&
 282                     (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
 283                         if (walk_state->namespace_override) {
 284                                 flags |= ACPI_NS_OVERRIDE_IF_FOUND;
 285                                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 286                                                   "[%s] Override allowed\n",
 287                                                   acpi_ut_get_type_name
 288                                                   (object_type)));
 289                         } else {
 290                                 flags |= ACPI_NS_ERROR_IF_FOUND;
 291                                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 292                                                   "[%s] Cannot already exist\n",
 293                                                   acpi_ut_get_type_name
 294                                                   (object_type)));
 295                         }
 296                 } else {
 297                         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 298                                           "[%s] Both Find or Create allowed\n",
 299                                           acpi_ut_get_type_name(object_type)));
 300                 }
 301
 302                 /*
 303                  * Enter the named type into the internal namespace. We enter the name
 304                  * as we go downward in the parse tree. Any necessary subobjects that
 305                  * involve arguments to the opcode must be created as we go back up the
 306                  * parse tree later.
 307                  */
 308                 status =
 309                     acpi_ns_lookup(walk_state->scope_info, path, object_type,
 310                                    ACPI_IMODE_LOAD_PASS1, flags, walk_state,
 311                                    &node);
 312                 if (ACPI_FAILURE(status)) {
 313                         if (status == AE_ALREADY_EXISTS) {
 314
 315                                 /* The name already exists in this scope */
 316
 317                                 if (node->flags & ANOBJ_IS_EXTERNAL) {
 318                                         /*
 319                                          * Allow one create on an object or segment that was
 320                                          * previously declared External
 321                                          */
 322                                         node->flags &= ~ANOBJ_IS_EXTERNAL;
 323                                         node->type = (u8) object_type;
 324
 325                                         /* Just retyped a node, probably will need to open a scope */
 326
 327                                         if (acpi_ns_opens_scope(object_type)) {
 328                                                 status =
 329                                                     acpi_ds_scope_stack_push
 330                                                     (node, object_type,
 331                                                      walk_state);
 332                                                 if (ACPI_FAILURE(status)) {
 333                                                         return_ACPI_STATUS
 334                                                             (status);
 335                                                 }
 336                                         }
 337
 338                                         status = AE_OK;
 339                                 }
 340                         }
 341
 342                         if (ACPI_FAILURE(status)) {
 343                                 ACPI_ERROR_NAMESPACE(walk_state->scope_info,
 344                                                      path, status);
 345                                 return_ACPI_STATUS(status);
 346                         }
 347                 }
 348                 break;
 349         }
 350
 351         /* Common exit */
 352
 353         if (!op) {
 354
 355                 /* Create a new op */
 356
 357                 op = acpi_ps_alloc_op(walk_state->opcode, walk_state->aml);
 358                 if (!op) {
 359                         return_ACPI_STATUS(AE_NO_MEMORY);
 360                 }
 361         }
 362
 363         /* Initialize the op */
 364
 365 #ifdef ACPI_CONSTANT_EVAL_ONLY
 366         op->named.path = path;
 367 #endif
 368
 369         if (node) {
 370                 /*
 371                  * Put the Node in the "op" object that the parser uses, so we
 372                  * can get it again quickly when this scope is closed
 373                  */
 374                 op->common.node = node;
 375                 op->named.name = node->name.integer;
 376         }
 377
 378         acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
 379                            op);
 380         *out_op = op;
 381         return_ACPI_STATUS(status);
 382 }
 383
 384 /*******************************************************************************
 385  *
 386  * FUNCTION:    acpi_ds_load1_end_op
 387  *
 388  * PARAMETERS:  walk_state      - Current state of the parse tree walk
 389  *
 390  * RETURN:      Status
 391  *
 392  * DESCRIPTION: Ascending callback used during the loading of the namespace,
 393  *              both control methods and everything else.
 394  *
 395  ******************************************************************************/
 396
 397 acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
 398 {
 399         union acpi_parse_object *op;
 400         acpi_object_type object_type;
 401         acpi_status status = AE_OK;
 402
 403 #ifdef ACPI_ASL_COMPILER
 404         u8 param_count;
 405 #endif
 406
 407         ACPI_FUNCTION_TRACE(ds_load1_end_op);
 408
 409         op = walk_state->op;
 410         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
 411                           walk_state));
 412
 413         /* We are only interested in opcodes that have an associated name */
 414
 415         if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
 416                 return_ACPI_STATUS(AE_OK);
 417         }
 418
 419         /* Get the object type to determine if we should pop the scope */
 420
 421         object_type = walk_state->op_info->object_type;
 422
 423         if (walk_state->op_info->flags & AML_FIELD) {
 424                 /*
 425                  * If we are executing a method, do not create any namespace objects
 426                  * during the load phase, only during execution.
 427                  */
 428                 if (!walk_state->method_node) {
 429                         if (walk_state->opcode == AML_FIELD_OP ||
 430                             walk_state->opcode == AML_BANK_FIELD_OP ||
 431                             walk_state->opcode == AML_INDEX_FIELD_OP) {
 432                                 status =
 433                                     acpi_ds_init_field_objects(op, walk_state);
 434                         }
 435                 }
 436                 return_ACPI_STATUS(status);
 437         }
 438
 439         /*
 440          * If we are executing a method, do not create any namespace objects
 441          * during the load phase, only during execution.
 442          */
 443         if (!walk_state->method_node) {
 444                 if (op->common.aml_opcode == AML_REGION_OP) {
 445                         status =
 446                             acpi_ex_create_region(op->named.data,
 447                                                   op->named.length,
 448                                                   (acpi_adr_space_type)
 449                                                   ((op->common.value.arg)->
 450                                                    common.value.integer),
 451                                                   walk_state);
 452                         if (ACPI_FAILURE(status)) {
 453                                 return_ACPI_STATUS(status);
 454                         }
 455                 } else if (op->common.aml_opcode == AML_DATA_REGION_OP) {
 456                         status =
 457                             acpi_ex_create_region(op->named.data,
 458                                                   op->named.length,
 459                                                   ACPI_ADR_SPACE_DATA_TABLE,
 460                                                   walk_state);
 461                         if (ACPI_FAILURE(status)) {
 462                                 return_ACPI_STATUS(status);
 463                         }
 464                 }
 465         }
 466
 467         if (op->common.aml_opcode == AML_NAME_OP) {
 468
 469                 /* For Name opcode, get the object type from the argument */
 470
 471                 if (op->common.value.arg) {
 472                         object_type = (acpi_ps_get_opcode_info((op->common.
 473                                                                 value.arg)->
 474                                                                common.
 475                                                                aml_opcode))->
 476                             object_type;
 477
 478                         /* Set node type if we have a namespace node */
 479
 480                         if (op->common.node) {
 481                                 op->common.node->type = (u8) object_type;
 482                         }
 483                 }
 484         }
 485 #ifdef ACPI_ASL_COMPILER
 486         /*
 487          * For external opcode, get the object type from the argument and
 488          * get the parameter count from the argument's next.
 489          */
 490         if (acpi_gbl_disasm_flag &&
 491             op->common.node && op->common.aml_opcode == AML_EXTERNAL_OP) {
 492                 /*
 493                  * Note, if this external is not a method
 494                  * Op->Common.Value.Arg->Common.Next->Common.Value.Integer == 0
 495                  * Therefore, param_count will be 0.
 496                  */
 497                 param_count =
 498                     (u8)op->common.value.arg->common.next->common.value.integer;
 499                 object_type = (u8)op->common.value.arg->common.value.integer;
 500                 op->common.node->flags |= ANOBJ_IS_EXTERNAL;
 501                 op->common.node->type = (u8)object_type;
 502
 503                 acpi_dm_create_subobject_for_external((u8)object_type,
 504                                                       &op->common.node,
 505                                                       param_count);
 506
 507                 /*
 508                  * Add the external to the external list because we may be
 509                  * emitting code based off of the items within the external list.
 510                  */
 511                 acpi_dm_add_op_to_external_list(op, op->named.path,
 512                                                 (u8)object_type, param_count,
 513                                                 ACPI_EXT_ORIGIN_FROM_OPCODE |
 514                                                 ACPI_EXT_RESOLVED_REFERENCE);
 515         }
 516 #endif
 517
 518         /*
 519          * If we are executing a method, do not create any namespace objects
 520          * during the load phase, only during execution.
 521          */
 522         if (!walk_state->method_node) {
 523                 if (op->common.aml_opcode == AML_METHOD_OP) {
 524                         /*
 525                          * method_op pkg_length name_string method_flags term_list
 526                          *
 527                          * Note: We must create the method node/object pair as soon as we
 528                          * see the method declaration. This allows later pass1 parsing
 529                          * of invocations of the method (need to know the number of
 530                          * arguments.)
 531                          */
 532                         ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 533                                           "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
 534                                           walk_state, op, op->named.node));
 535
 536                         if (!acpi_ns_get_attached_object(op->named.node)) {
 537                                 walk_state->operands[0] =
 538                                     ACPI_CAST_PTR(void, op->named.node);
 539                                 walk_state->num_operands = 1;
 540
 541                                 status =
 542                                     acpi_ds_create_operands(walk_state,
 543                                                             op->common.value.
 544                                                             arg);
 545                                 if (ACPI_SUCCESS(status)) {
 546                                         status =
 547                                             acpi_ex_create_method(op->named.
 548                                                                   data,
 549                                                                   op->named.
 550                                                                   length,
 551                                                                   walk_state);
 552                                 }
 553
 554                                 walk_state->operands[0] = NULL;
 555                                 walk_state->num_operands = 0;
 556
 557                                 if (ACPI_FAILURE(status)) {
 558                                         return_ACPI_STATUS(status);
 559                                 }
 560                         }
 561                 }
 562         }
 563
 564         /* Pop the scope stack (only if loading a table) */
 565
 566         if (!walk_state->method_node &&
 567             op->common.aml_opcode != AML_EXTERNAL_OP &&
 568             acpi_ns_opens_scope(object_type)) {
 569                 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
 570                                   "(%s): Popping scope for Op %p\n",
 571                                   acpi_ut_get_type_name(object_type), op));
 572
 573                 status = acpi_ds_scope_stack_pop(walk_state);
 574         }
 575
 576         return_ACPI_STATUS(status);
 577 }