1 * TSEC-compatible ethernet nodes
5 - compatible : Should be "fsl,tsec"
6 - reg : Offset and length of the register set for the device
7 - phy-handle : See ethernet.txt file in the same directory.
8 - phy-connection-type : See ethernet.txt file in the same directory. This
9 property is only really needed if the connection is of type "rgmii-id",
10 "rgmii-rxid" and "rgmii-txid" as all other connection types are detected
15 compatible = "fsl,tsec";
16 reg = <0x24000 0x1000>;
18 phy-connection-type = "sgmii";
21 Child nodes of the TSEC controller are typically the individual PHY devices
22 connected via the MDIO bus (sometimes the MDIO bus controller is separate).
26 The MDIO is a bus to which the PHY devices are connected. For each
27 device that exists on this bus, a PHY node should be created.
30 - compatible : Should define the compatible device type for the
31 mdio. Currently supported string/device is "fsl,tsec-mdio".
32 - reg : Offset and length of the register set for the device
37 compatible = "fsl,tsec-mdio";