2 # Copyright 2007-2016 The OpenSSL Project Authors. All Rights Reserved.
4 # Licensed under the OpenSSL license (the "License"). You may not use
5 # this file except in compliance with the License. You can obtain a copy
6 # in the file LICENSE in the source distribution or at
7 # https://www.openssl.org/source/license.html
10 # ====================================================================
11 # Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
12 # project. The module is, however, dual licensed under OpenSSL and
13 # CRYPTOGAMS licenses depending on where you obtain it. For further
14 # details see http://www.openssl.org/~appro/cryptogams/.
15 # ====================================================================
17 # sha1_block procedure for ARMv4.
21 # Size/performance trade-off
22 # ====================================================================
23 # impl size in bytes comp cycles[*] measured performance
24 # ====================================================================
26 # armv4-small 392/+29% 1958/+64% 2250/+96%
27 # armv4-compact 740/+89% 1552/+26% 1840/+22%
28 # armv4-large 1420/+92% 1307/+19% 1370/+34%[***]
29 # full unroll ~5100/+260% ~1260/+4% ~1300/+5%
30 # ====================================================================
31 # thumb = same as 'small' but in Thumb instructions[**] and
32 # with recurring code in two private functions;
33 # small = detached Xload/update, loops are folded;
34 # compact = detached Xload/update, 5x unroll;
35 # large = interleaved Xload/update, 5x unroll;
36 # full unroll = interleaved Xload/update, full unroll, estimated[!];
38 # [*] Manually counted instructions in "grand" loop body. Measured
39 # performance is affected by prologue and epilogue overhead,
40 # i-cache availability, branch penalties, etc.
41 # [**] While each Thumb instruction is twice smaller, they are not as
42 # diverse as ARM ones: e.g., there are only two arithmetic
43 # instructions with 3 arguments, no [fixed] rotate, addressing
44 # modes are limited. As result it takes more instructions to do
45 # the same job in Thumb, therefore the code is never twice as
46 # small and always slower.
47 # [***] which is also ~35% better than compiler generated code. Dual-
48 # issue Cortex A8 core was measured to process input block in
53 # Rescheduling for dual-issue pipeline resulted in 13% improvement on
54 # Cortex A8 core and in absolute terms ~870 cycles per input block
55 # [or 13.6 cycles per byte].
59 # Profiler-assisted and platform-specific optimization resulted in 10%
60 # improvement on Cortex A8 core and 12.2 cycles per byte.
64 # Add NEON implementation (see sha1-586.pl for background info). On
65 # Cortex A8 it was measured to process one byte in 6.7 cycles or >80%
66 # faster than integer-only code. Because [fully unrolled] NEON code
67 # is ~2.5x larger and there are some redundant instructions executed
68 # when processing last block, improvement is not as big for smallest
69 # blocks, only ~30%. Snapdragon S4 is a tad faster, 6.4 cycles per
70 # byte, which is also >80% faster than integer-only code. Cortex-A15
71 # is even faster spending 5.6 cycles per byte outperforming integer-
72 # only code by factor of 2.
76 # Add ARMv8 code path performing at 2.35 cpb on Apple A7.
79 if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
80 else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
82 if ($flavour && $flavour ne "void") {
83 $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
84 ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
85 ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
86 die "can't locate arm-xlate.pl";
88 open STDOUT,"| \"$^X\" $xlate $flavour $output";
90 open STDOUT,">$output";
110 my ($a,$b,$c,$d,$e,$opt1,$opt2)=@_;
115 add $e,$K,$e,ror#2 @ E+=K_xx_xx
118 eor $t2,$t2,$t3 @ 1 cycle stall
119 eor $t1,$c,$d @ F_xx_xx
121 add $e,$e,$a,ror#27 @ E+=ROR(A,27)
122 eor $t0,$t0,$t2,ror#31
126 add $e,$e,$t0 @ E+=X[i]
131 my ($a,$b,$c,$d,$e)=@_;
137 add $e,$K,$e,ror#2 @ E+=K_00_19
139 orr $t0,$t0,$t1,lsl#8
140 eor $t1,$c,$d @ F_xx_xx
141 orr $t0,$t0,$t2,lsl#16
142 add $e,$e,$a,ror#27 @ E+=ROR(A,27)
143 orr $t0,$t0,$t3,lsl#24
145 ldr $t0,[$inp],#4 @ handles unaligned
146 add $e,$K,$e,ror#2 @ E+=K_00_19
147 eor $t1,$c,$d @ F_xx_xx
148 add $e,$e,$a,ror#27 @ E+=ROR(A,27)
150 rev $t0,$t0 @ byte swap
154 add $e,$e,$t0 @ E+=X[i]
155 eor $t1,$t1,$d,ror#2 @ F_00_19(B,C,D)
157 add $e,$e,$t1 @ E+=F_00_19(B,C,D)
162 my ($a,$b,$c,$d,$e)=@_;
163 &Xupdate(@_,"and $t1,$b,$t1,ror#2");
165 eor $t1,$t1,$d,ror#2 @ F_00_19(B,C,D)
166 add $e,$e,$t1 @ E+=F_00_19(B,C,D)
171 my ($a,$b,$c,$d,$e)=@_;
172 &Xupdate(@_,"eor $t1,$b,$t1,ror#2");
174 add $e,$e,$t1 @ E+=F_20_39(B,C,D)
179 my ($a,$b,$c,$d,$e)=@_;
180 &Xupdate(@_,"and $t1,$b,$t1,ror#2","and $t2,$c,$d");
182 add $e,$e,$t1 @ E+=F_40_59(B,C,D)
188 #include "arm_arch.h"
191 #if defined(__thumb2__)
198 .global sha1_block_data_order
199 .type sha1_block_data_order,%function
202 sha1_block_data_order:
203 #if __ARM_MAX_ARCH__>=7
206 ldr r12,.LOPENSSL_armcap
207 ldr r12,[r3,r12] @ OPENSSL_armcap_P
216 stmdb sp!,{r4-r12,lr}
217 add $len,$inp,$len,lsl#6 @ $len to point at the end of $inp
218 ldmia $ctx,{$a,$b,$c,$d,$e}
225 mov $e,$e,ror#30 @ [6]
228 for($i=0;$i<5;$i++) {
229 &BODY_00_15(@V); unshift(@V,pop(@V));
232 #if defined(__thumb2__)
238 bne .L_00_15 @ [((11+4)*5+2)*3]
241 &BODY_00_15(@V); unshift(@V,pop(@V));
242 &BODY_16_19(@V); unshift(@V,pop(@V));
243 &BODY_16_19(@V); unshift(@V,pop(@V));
244 &BODY_16_19(@V); unshift(@V,pop(@V));
245 &BODY_16_19(@V); unshift(@V,pop(@V));
248 ldr $K,.LK_20_39 @ [+15+16*4]
249 cmn sp,#0 @ [+3], clear carry to denote 20_39
252 for($i=0;$i<5;$i++) {
253 &BODY_20_39(@V); unshift(@V,pop(@V));
256 #if defined(__thumb2__)
260 teq $Xi,sp @ preserve carry
262 bne .L_20_39_or_60_79 @ [+((12+3)*5+2)*4]
263 bcs .L_done @ [+((12+3)*5+2)*4], spare 300 bytes
266 sub sp,sp,#20*4 @ [+2]
269 for($i=0;$i<5;$i++) {
270 &BODY_40_59(@V); unshift(@V,pop(@V));
273 #if defined(__thumb2__)
279 bne .L_40_59 @ [+((12+5)*5+2)*4]
283 cmp sp,#0 @ set carry to denote 60_79
284 b .L_20_39_or_60_79 @ [+4], spare 300 bytes
286 add sp,sp,#80*4 @ "deallocate" stack frame
287 ldmia $ctx,{$K,$t0,$t1,$t2,$t3}
293 stmia $ctx,{$a,$b,$c,$d,$e}
295 bne .Lloop @ [+18], total 1307
298 ldmia sp!,{r4-r12,pc}
300 ldmia sp!,{r4-r12,lr}
302 moveq pc,lr @ be binary compatible with V4, yet
303 bx lr @ interoperable with Thumb ISA:-)
305 .size sha1_block_data_order,.-sha1_block_data_order
308 .LK_00_19: .word 0x5a827999
309 .LK_20_39: .word 0x6ed9eba1
310 .LK_40_59: .word 0x8f1bbcdc
311 .LK_60_79: .word 0xca62c1d6
312 #if __ARM_MAX_ARCH__>=7
314 .word OPENSSL_armcap_P-.Lsha1_block
316 .asciz "SHA1 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
319 #####################################################################
323 my @V=($a,$b,$c,$d,$e);
324 my ($K_XX_XX,$Ki,$t0,$t1,$Xfer,$saved_sp)=map("r$_",(8..12,14));
326 my @X=map("q$_",(8..11,0..3));
327 my @Tx=("q12","q13");
328 my ($K,$zero)=("q14","q15");
331 sub AUTOLOAD() # thunk [simplified] x86-style perlasm
332 { my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
334 $arg = "#$arg" if ($arg*1 eq $arg);
335 $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
340 '($a,$b,$c,$d,$e)=@V;'. # '$code.="@ $j\n";'.
342 '&add ($e,$e,$Ki)', # e+=X[i]+K
344 '&ldr ($Ki,sprintf "[sp,#%d]",4*(($j+1)&15))',
345 '&add ($e,$e,$a,"ror#27")', # e+=ROR(A,27)
346 '&eor ($t1,$t1,$t0)', # F_00_19
347 '&mov ($b,$b,"ror#2")', # b=ROR(b,2)
348 '&add ($e,$e,$t1);'. # e+=F_00_19
349 '$j++; unshift(@V,pop(@V));'
354 '($a,$b,$c,$d,$e)=@V;'. # '$code.="@ $j\n";'.
356 '&add ($e,$e,$Ki)', # e+=X[i]+K
357 '&ldr ($Ki,sprintf "[sp,#%d]",4*(($j+1)&15)) if ($j<79)',
358 '&eor ($t1,$t0,$c)', # F_20_39
359 '&add ($e,$e,$a,"ror#27")', # e+=ROR(A,27)
360 '&mov ($b,$b,"ror#2")', # b=ROR(b,2)
361 '&add ($e,$e,$t1);'. # e+=F_20_39
362 '$j++; unshift(@V,pop(@V));'
367 '($a,$b,$c,$d,$e)=@V;'. # '$code.="@ $j\n";'.
368 '&add ($e,$e,$Ki)', # e+=X[i]+K
370 '&ldr ($Ki,sprintf "[sp,#%d]",4*(($j+1)&15))',
371 '&add ($e,$e,$a,"ror#27")', # e+=ROR(A,27)
375 '&mov ($b,$b,"ror#2")', # b=ROR(b,2)
376 '&add ($e,$e,$t1);'. # e+=F_40_59
377 '$j++; unshift(@V,pop(@V));'
384 my @insns = (&$body,&$body,&$body,&$body);
387 &vext_8 (@X[0],@X[-4&7],@X[-3&7],8); # compose "X[-14]" in "X[0]"
391 &vadd_i32 (@Tx[1],@X[-1&7],$K);
393 &vld1_32 ("{$K\[]}","[$K_XX_XX,:32]!") if ($Xi%5==0);
395 &vext_8 (@Tx[0],@X[-1&7],$zero,4); # "X[-3]", 3 words
399 &veor (@X[0],@X[0],@X[-4&7]); # "X[0]"^="X[-16]"
402 &veor (@Tx[0],@Tx[0],@X[-2&7]); # "X[-3]"^"X[-8]"
405 &veor (@Tx[0],@Tx[0],@X[0]); # "X[0]"^="X[-3]"^"X[-8]
408 &vst1_32 ("{@Tx[1]}","[$Xfer,:128]!"); # X[]+K xfer
409 &sub ($Xfer,$Xfer,64) if ($Xi%4==0);
412 &vext_8 (@Tx[1],$zero,@Tx[0],4); # "X[0]"<<96, extract one dword
415 &vadd_i32 (@X[0],@Tx[0],@Tx[0]);
418 &vsri_32 (@X[0],@Tx[0],31); # "X[0]"<<<=1
422 &vshr_u32 (@Tx[0],@Tx[1],30);
425 &vshl_u32 (@Tx[1],@Tx[1],2);
428 &veor (@X[0],@X[0],@Tx[0]);
431 &veor (@X[0],@X[0],@Tx[1]); # "X[0]"^=("X[0]">>96)<<<2
433 foreach (@insns) { eval; } # remaining instructions [if any]
435 $Xi++; push(@X,shift(@X)); # "rotate" X[]
441 my @insns = (&$body,&$body,&$body,&$body);
444 &vext_8 (@Tx[0],@X[-2&7],@X[-1&7],8); # compose "X[-6]"
448 &veor (@X[0],@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]"
451 &veor (@X[0],@X[0],@X[-7&7]); # "X[0]"^="X[-28]"
454 &vadd_i32 (@Tx[1],@X[-1&7],$K);
456 &vld1_32 ("{$K\[]}","[$K_XX_XX,:32]!") if ($Xi%5==0);
458 &veor (@Tx[0],@Tx[0],@X[0]); # "X[-6]"^="X[0]"
461 &vshr_u32 (@X[0],@Tx[0],30);
464 &vst1_32 ("{@Tx[1]}","[$Xfer,:128]!"); # X[]+K xfer
465 &sub ($Xfer,$Xfer,64) if ($Xi%4==0);
468 &vsli_32 (@X[0],@Tx[0],2); # "X[0]"="X[-6]"<<<2
470 foreach (@insns) { eval; } # remaining instructions [if any]
472 $Xi++; push(@X,shift(@X)); # "rotate" X[]
478 my @insns = (&$body,&$body,&$body,&$body);
481 &vadd_i32 (@Tx[1],@X[-1&7],$K);
484 &vst1_32 ("{@Tx[1]}","[$Xfer,:128]!");
485 &sub ($Xfer,$Xfer,64);
488 &sub ($K_XX_XX,$K_XX_XX,16); # rewind $K_XX_XX
490 &subeq ($inp,$inp,64); # reload last block to avoid SEGV
491 &vld1_8 ("{@X[-4&7]-@X[-3&7]}","[$inp]!");
494 &vld1_8 ("{@X[-2&7]-@X[-1&7]}","[$inp]!");
497 &vld1_32 ("{$K\[]}","[$K_XX_XX,:32]!"); # load K_00_19
500 &vrev32_8 (@X[-4&7],@X[-4&7]);
502 foreach (@insns) { eval; } # remaining instructions
510 my @insns = (&$body,&$body,&$body,&$body);
513 &vrev32_8 (@X[($Xi-3)&7],@X[($Xi-3)&7]);
516 &vadd_i32 (@X[$Xi&7],@X[($Xi-4)&7],$K);
519 &vst1_32 ("{@X[$Xi&7]}","[$Xfer,:128]!");# X[]+K xfer to IALU
521 foreach (@insns) { eval; }
527 #if __ARM_MAX_ARCH__>=7
531 .type sha1_block_data_order_neon,%function
533 sha1_block_data_order_neon:
535 stmdb sp!,{r4-r12,lr}
536 add $len,$inp,$len,lsl#6 @ $len to point at the end of $inp
537 @ dmb @ errata #451034 on early Cortex A8
538 @ vstmdb sp!,{d8-d15} @ ABI specification says so
541 adr $K_XX_XX,.LK_00_19
542 bic $Xfer,$Xfer,#15 @ align for 128-bit stores
544 ldmia $ctx,{$a,$b,$c,$d,$e} @ load context
545 mov sp,$Xfer @ alloca
547 vld1.8 {@X[-4&7]-@X[-3&7]},[$inp]! @ handles unaligned
548 veor $zero,$zero,$zero
549 vld1.8 {@X[-2&7]-@X[-1&7]},[$inp]!
550 vld1.32 {${K}\[]},[$K_XX_XX,:32]! @ load K_00_19
551 vrev32.8 @X[-4&7],@X[-4&7] @ yes, even on
552 vrev32.8 @X[-3&7],@X[-3&7] @ big-endian...
553 vrev32.8 @X[-2&7],@X[-2&7]
554 vadd.i32 @X[0],@X[-4&7],$K
555 vrev32.8 @X[-1&7],@X[-1&7]
556 vadd.i32 @X[1],@X[-3&7],$K
557 vst1.32 {@X[0]},[$Xfer,:128]!
558 vadd.i32 @X[2],@X[-2&7],$K
559 vst1.32 {@X[1]},[$Xfer,:128]!
560 vst1.32 {@X[2]},[$Xfer,:128]!
561 ldr $Ki,[sp] @ big RAW stall
565 &Xupdate_16_31(\&body_00_19);
566 &Xupdate_16_31(\&body_00_19);
567 &Xupdate_16_31(\&body_00_19);
568 &Xupdate_16_31(\&body_00_19);
569 &Xupdate_32_79(\&body_00_19);
570 &Xupdate_32_79(\&body_20_39);
571 &Xupdate_32_79(\&body_20_39);
572 &Xupdate_32_79(\&body_20_39);
573 &Xupdate_32_79(\&body_20_39);
574 &Xupdate_32_79(\&body_20_39);
575 &Xupdate_32_79(\&body_40_59);
576 &Xupdate_32_79(\&body_40_59);
577 &Xupdate_32_79(\&body_40_59);
578 &Xupdate_32_79(\&body_40_59);
579 &Xupdate_32_79(\&body_40_59);
580 &Xupdate_32_79(\&body_20_39);
581 &Xuplast_80(\&body_20_39);
582 &Xloop(\&body_20_39);
583 &Xloop(\&body_20_39);
584 &Xloop(\&body_20_39);
586 ldmia $ctx,{$Ki,$t0,$t1,$Xfer} @ accumulate context
597 stmia $ctx,{$a,$b,$c,$d,$e}
602 @ vldmia sp!,{d8-d15}
603 ldmia sp!,{r4-r12,pc}
604 .size sha1_block_data_order_neon,.-sha1_block_data_order_neon
608 #####################################################################
612 my ($ABCD,$E,$E0,$E1)=map("q$_",(0..3));
613 my @MSG=map("q$_",(4..7));
614 my @Kxx=map("q$_",(8..11));
615 my ($W0,$W1,$ABCD_SAVE)=map("q$_",(12..14));
618 #if __ARM_MAX_ARCH__>=7
620 # if defined(__thumb2__)
621 # define INST(a,b,c,d) .byte c,d|0xf,a,b
623 # define INST(a,b,c,d) .byte a,b,c,d|0x10
626 .type sha1_block_data_order_armv8,%function
628 sha1_block_data_order_armv8:
630 vstmdb sp!,{d8-d15} @ ABI specification says so
634 vld1.32 {$ABCD},[$ctx]!
635 vld1.32 {$E\[0]},[$ctx]
637 vld1.32 {@Kxx[0]\[]},[r3,:32]!
638 vld1.32 {@Kxx[1]\[]},[r3,:32]!
639 vld1.32 {@Kxx[2]\[]},[r3,:32]!
640 vld1.32 {@Kxx[3]\[]},[r3,:32]
643 vld1.8 {@MSG[0]-@MSG[1]},[$inp]!
644 vld1.8 {@MSG[2]-@MSG[3]},[$inp]!
645 vrev32.8 @MSG[0],@MSG[0]
646 vrev32.8 @MSG[1],@MSG[1]
648 vadd.i32 $W0,@Kxx[0],@MSG[0]
649 vrev32.8 @MSG[2],@MSG[2]
650 vmov $ABCD_SAVE,$ABCD @ offload
653 vadd.i32 $W1,@Kxx[0],@MSG[1]
654 vrev32.8 @MSG[3],@MSG[3]
657 vadd.i32 $W0,@Kxx[$j],@MSG[2]
658 sha1su0 @MSG[0],@MSG[1],@MSG[2]
660 for ($j=0,$i=1;$i<20-3;$i++) {
661 my $f=("c","p","m","p")[$i/5];
665 vadd.i32 $W1,@Kxx[$j],@MSG[3]
666 sha1su1 @MSG[0],@MSG[3]
668 $code.=<<___ if ($i<20-4);
669 sha1su0 @MSG[1],@MSG[2],@MSG[3]
671 ($E0,$E1)=($E1,$E0); ($W0,$W1)=($W1,$W0);
672 push(@MSG,shift(@MSG)); $j++ if ((($i+3)%5)==0);
677 vadd.i32 $W1,@Kxx[$j],@MSG[3]
686 vadd.i32 $ABCD,$ABCD,$ABCD_SAVE
689 vst1.32 {$ABCD},[$ctx]!
690 vst1.32 {$E\[0]},[$ctx]
694 .size sha1_block_data_order_armv8,.-sha1_block_data_order_armv8
699 #if __ARM_MAX_ARCH__>=7
700 .comm OPENSSL_armcap_P,4,4
705 "sha1c" => 0xf2000c40, "sha1p" => 0xf2100c40,
706 "sha1m" => 0xf2200c40, "sha1su0" => 0xf2300c40,
707 "sha1h" => 0xf3b902c0, "sha1su1" => 0xf3ba0380 );
710 my ($mnemonic,$arg)=@_;
712 if ($arg =~ m/q([0-9]+)(?:,\s*q([0-9]+))?,\s*q([0-9]+)/o) {
713 my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19)
714 |(($2&7)<<17)|(($2&8)<<4)
715 |(($3&7)<<1) |(($3&8)<<2);
716 # since ARMv7 instructions are always encoded little-endian.
717 # correct solution is to use .inst directive, but older
718 # assemblers don't implement it:-(
720 # this fix-up provides Thumb encoding in conjunction with INST
721 $word &= ~0x10000000 if (($word & 0x0f000000) == 0x02000000);
722 sprintf "INST(0x%02x,0x%02x,0x%02x,0x%02x)\t@ %s %s",
723 $word&0xff,($word>>8)&0xff,
724 ($word>>16)&0xff,($word>>24)&0xff,
730 foreach (split($/,$code)) {
731 s/{q([0-9]+)\[\]}/sprintf "{d%d[],d%d[]}",2*$1,2*$1+1/eo or
732 s/{q([0-9]+)\[0\]}/sprintf "{d%d[0]}",2*$1/eo;
734 s/\b(sha1\w+)\s+(q.*)/unsha1($1,$2)/geo;
737 s/\bbx\s+lr\b/.word\t0xe12fff1e/o; # make it possible to compile with -march=armv4
742 close STDOUT; # enforce flush