3 # ====================================================================
4 # [Re]written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
5 # project. The module is, however, dual licensed under OpenSSL and
6 # CRYPTOGAMS licenses depending on where you obtain it. For further
7 # details see http://www.openssl.org/~appro/cryptogams/.
8 # ====================================================================
10 # At some point it became apparent that the original SSLeay RC4
11 # assembler implementation performs suboptimally on latest IA-32
12 # microarchitectures. After re-tuning performance has changed as
20 # (*) This number is actually a trade-off:-) It's possible to
21 # achieve +72%, but at the cost of -48% off PIII performance.
22 # In other words code performing further 13% faster on AMD
23 # would perform almost 2 times slower on Intel PIII...
24 # For reference! This code delivers ~80% of rc4-amd64.pl
25 # performance on the same Opteron machine.
26 # (**) This number requires compressed key schedule set up by
27 # RC4_set_key [see commentary below for further details].
29 # <appro@fy.chalmers.se>
31 $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
32 push(@INC,"${dir}","${dir}../../perlasm");
35 &asm_init($ARGV[0],"rc4-586.pl");
47 my $func = ($i==0)?*mov:*or;
49 &add (&LB($yy),&LB($tx));
50 &mov ($ty,&DWP(0,$dat,$yy,4));
51 &mov (&DWP(0,$dat,$yy,4),$tx);
52 &mov (&DWP(0,$dat,$xx,4),$ty);
56 &ror ($out,8) if ($i!=0);
58 &mov ($tx,&DWP(0,$dat,$xx,4));
60 &mov ($tx,&wparam(3)); # reload [re-biased] out
62 &$func ($out,&DWP(0,$dat,$ty,4));
65 # void RC4(RC4_KEY *key,size_t len,const unsigned char *inp,unsigned char *out);
66 &function_begin("RC4");
67 &mov ($dat,&wparam(0)); # load key schedule pointer
68 &mov ($ty, &wparam(1)); # load len
69 &mov ($inp,&wparam(2)); # load inp
70 &mov ($out,&wparam(3)); # load out
72 &xor ($xx,$xx); # avoid partial register stalls
75 &cmp ($ty,0); # safety net
76 &je (&label("abort"));
78 &mov (&LB($xx),&BP(0,$dat)); # load key->x
79 &mov (&LB($yy),&BP(4,$dat)); # load key->y
82 &lea ($tx,&DWP(0,$inp,$ty));
83 &sub ($out,$inp); # re-bias out
84 &mov (&wparam(1),$tx); # save input+len
88 # detect compressed key schedule...
89 &cmp (&DWP(256,$dat),-1);
90 &je (&label("RC4_CHAR"));
92 &mov ($tx,&DWP(0,$dat,$xx,4));
94 &and ($ty,-4); # how many 4-byte chunks?
95 &jz (&label("loop1"));
97 &lea ($ty,&DWP(-4,$inp,$ty));
98 &mov (&wparam(2),$ty); # save input+(len/4)*4-4
99 &mov (&wparam(3),$out); # $out as accumulator in this loop
101 &set_label("loop4",16);
102 for ($i=0;$i<4;$i++) { RC4_loop($i); }
104 &xor ($out,&DWP(0,$inp));
105 &cmp ($inp,&wparam(2)); # compare to input+(len/4)*4-4
106 &mov (&DWP(0,$tx,$inp),$out);# $tx holds re-biased out here
107 &lea ($inp,&DWP(4,$inp));
108 &mov ($tx,&DWP(0,$dat,$xx,4));
109 &jb (&label("loop4"));
111 &cmp ($inp,&wparam(1)); # compare to input+len
112 &je (&label("done"));
113 &mov ($out,&wparam(3)); # restore $out
115 &set_label("loop1",16);
116 &add (&LB($yy),&LB($tx));
117 &mov ($ty,&DWP(0,$dat,$yy,4));
118 &mov (&DWP(0,$dat,$yy,4),$tx);
119 &mov (&DWP(0,$dat,$xx,4),$ty);
123 &mov ($ty,&DWP(0,$dat,$ty,4));
124 &xor (&LB($ty),&BP(0,$inp));
125 &lea ($inp,&DWP(1,$inp));
126 &mov ($tx,&DWP(0,$dat,$xx,4));
127 &cmp ($inp,&wparam(1)); # compare to input+len
128 &mov (&BP(-1,$out,$inp),&LB($ty));
129 &jb (&label("loop1"));
131 &jmp (&label("done"));
133 # this is essentially Intel P4 specific codepath...
134 &set_label("RC4_CHAR",16);
135 &movz ($tx,&BP(0,$dat,$xx));
136 # strangely enough unrolled loop performs over 20% slower...
137 &set_label("cloop1");
138 &add (&LB($yy),&LB($tx));
139 &movz ($ty,&BP(0,$dat,$yy));
140 &mov (&BP(0,$dat,$yy),&LB($tx));
141 &mov (&BP(0,$dat,$xx),&LB($ty));
142 &add (&LB($ty),&LB($tx));
143 &movz ($ty,&BP(0,$dat,$ty));
145 &xor (&LB($ty),&BP(0,$inp));
146 &lea ($inp,&DWP(1,$inp));
147 &movz ($tx,&BP(0,$dat,$xx));
148 &cmp ($inp,&wparam(1));
149 &mov (&BP(-1,$out,$inp),&LB($ty));
150 &jb (&label("cloop1"));
154 &mov (&BP(-4,$dat),&LB($yy)); # save key->y
155 &mov (&BP(-8,$dat),&LB($xx)); # save key->x
157 &function_end("RC4");
159 ########################################################################
167 &external_label("OPENSSL_ia32cap_P");
169 # void RC4_set_key(RC4_KEY *key,int len,const unsigned char *data);
170 &function_begin("RC4_set_key");
171 &mov ($out,&wparam(0)); # load key
172 &mov ($idi,&wparam(1)); # load len
173 &mov ($inp,&wparam(2)); # load data
174 &picmeup($idx,"OPENSSL_ia32cap_P");
176 &lea ($out,&DWP(2*4,$out)); # &key->data
177 &lea ($inp,&DWP(0,$inp,$idi)); # $inp to point at the end
180 &mov (&DWP(-4,$out),$idi); # borrow key->y
182 &bt (&DWP(0,$idx),20); # check for bit#20
183 &jc (&label("c1stloop"));
185 &set_label("w1stloop",16);
186 &mov (&DWP(0,$out,"eax",4),"eax"); # key->data[i]=i;
187 &add (&LB("eax"),1); # i++;
188 &jnc (&label("w1stloop"));
193 &set_label("w2ndloop",16);
194 &mov ("eax",&DWP(0,$out,$ido,4));
195 &add (&LB($idx),&BP(0,$inp,$idi));
196 &add (&LB($idx),&LB("eax"));
198 &mov ("ebx",&DWP(0,$out,$idx,4));
199 &jnz (&label("wnowrap"));
200 &mov ($idi,&DWP(-4,$out));
201 &set_label("wnowrap");
202 &mov (&DWP(0,$out,$idx,4),"eax");
203 &mov (&DWP(0,$out,$ido,4),"ebx");
205 &jnc (&label("w2ndloop"));
206 &jmp (&label("exit"));
208 # Unlike all other x86 [and x86_64] implementations, Intel P4 core
209 # [including EM64T] was found to perform poorly with above "32-bit" key
210 # schedule, a.k.a. RC4_INT. Performance improvement for IA-32 hand-coded
211 # assembler turned out to be 3.5x if re-coded for compressed 8-bit one,
212 # a.k.a. RC4_CHAR! It's however inappropriate to just switch to 8-bit
213 # schedule for x86[_64], because non-P4 implementations suffer from
214 # significant performance losses then, e.g. PIII exhibits >2x
215 # deterioration, and so does Opteron. In order to assure optimal
216 # all-round performance, we detect P4 at run-time and set up compressed
217 # key schedule, which is recognized by RC4 procedure.
219 &set_label("c1stloop",16);
220 &mov (&BP(0,$out,"eax"),&LB("eax")); # key->data[i]=i;
221 &add (&LB("eax"),1); # i++;
222 &jnc (&label("c1stloop"));
228 &set_label("c2ndloop",16);
229 &mov (&LB("eax"),&BP(0,$out,$ido));
230 &add (&LB($idx),&BP(0,$inp,$idi));
231 &add (&LB($idx),&LB("eax"));
233 &mov (&LB("ebx"),&BP(0,$out,$idx));
234 &jnz (&label("cnowrap"));
235 &mov ($idi,&DWP(-4,$out));
236 &set_label("cnowrap");
237 &mov (&BP(0,$out,$idx),&LB("eax"));
238 &mov (&BP(0,$out,$ido),&LB("ebx"));
240 &jnc (&label("c2ndloop"));
242 &mov (&DWP(256,$out),-1); # mark schedule as compressed
246 &mov (&DWP(-8,$out),"eax"); # key->x=0;
247 &mov (&DWP(-4,$out),"eax"); # key->y=0;
248 &function_end("RC4_set_key");
250 # const char *RC4_options(void);
251 &function_begin_B("RC4_options");
252 &call (&label("pic_point"));
253 &set_label("pic_point");
255 &lea ("eax",&DWP(&label("opts")."-".&label("pic_point"),"eax"));
256 &picmeup("edx","OPENSSL_ia32cap_P");
257 &bt (&DWP(0,"edx"),20);
258 &jnc (&label("skip"));
262 &set_label("opts",64);
263 &asciz ("rc4(4x,int)");
264 &asciz ("rc4(1x,char)");
265 &asciz ("RC4 for x86, CRYPTOGAMS by <appro\@openssl.org>");
267 &function_end_B("RC4_options");