2 * MPC8260 FCC Fast Ethernet
4 * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
6 * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
7 * Marius Groeger <mgroeger@sysgo.de>
9 * See file CREDITS for list of people who contributed to this
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
29 * MPC8260 FCC Fast Ethernet
30 * Basic ET HW initialization and packet RX/TX routines
32 * This code will not perform the IO port configuration. This should be
33 * done in the iop_conf_t structure specific for the board.
36 * add a PHY driver to do the negotiation
37 * reflect negotiation results in FPSMR
38 * look for ways to configure the board specific stuff elsewhere, eg.
39 * config_xxx.h or the board directory
44 #include <asm/cpm_8260.h>
50 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_COMMANDS & CFG_CMD_NET) && \
51 defined(CONFIG_NET_MULTI)
53 static struct ether_fcc_info_s
57 ulong cpm_cr_enet_sblock;
58 ulong cpm_cr_enet_page;
64 #ifdef CONFIG_ETHER_ON_FCC1
75 #ifdef CONFIG_ETHER_ON_FCC2
86 #ifdef CONFIG_ETHER_ON_FCC3
98 /*---------------------------------------------------------------------*/
100 /* Maximum input DMA size. Must be a should(?) be a multiple of 4. */
101 #define PKT_MAXDMA_SIZE 1520
103 /* The FCC stores dest/src/type, data, and checksum for receive packets. */
104 #define PKT_MAXBUF_SIZE 1518
105 #define PKT_MINBUF_SIZE 64
107 /* Maximum input buffer size. Must be a multiple of 32. */
108 #define PKT_MAXBLR_SIZE 1536
110 #define TOUT_LOOP 1000000
114 static char txbuf[TX_BUF_CNT][PKT_MAXBLR_SIZE] __attribute__ ((aligned(8)));
116 #error "txbuf must be 64-bit aligned"
119 static uint rxIdx; /* index of the current RX buffer */
120 static uint txIdx; /* index of the current TX buffer */
123 * FCC Ethernet Tx and Rx buffer descriptors.
124 * Provide for Double Buffering
125 * Note: PKTBUFSRX is defined in net.h
128 typedef volatile struct rtxbd {
129 cbd_t rxbd[PKTBUFSRX];
130 cbd_t txbd[TX_BUF_CNT];
133 /* Good news: the FCC supports external BDs! */
135 static RTXBD rtx __attribute__ ((aligned(8)));
137 #error "rtx must be 64-bit aligned"
140 static int fec_send(struct eth_device* dev, volatile void *packet, int length)
146 printf("fec: bad packet size: %d\n", length);
150 for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
151 if (i >= TOUT_LOOP) {
152 printf("fec: tx buffer not ready\n");
157 rtx.txbd[txIdx].cbd_bufaddr = (uint)packet;
158 rtx.txbd[txIdx].cbd_datlen = length;
159 rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |
162 for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
163 if (i >= TOUT_LOOP) {
164 printf("fec: tx error\n");
170 printf("cycles: %d status: %04x\n", i, rtx.txbd[txIdx].cbd_sc);
173 /* return only status bits */
174 result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
180 static int fec_recv(struct eth_device* dev)
186 if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
188 break; /* nothing received - leave for() loop */
190 length = rtx.rxbd[rxIdx].cbd_datlen;
192 if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) {
193 printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc);
196 /* Pass the packet up to the protocol layers. */
197 NetReceive(NetRxPackets[rxIdx], length - 4);
201 /* Give the buffer back to the FCC. */
202 rtx.rxbd[rxIdx].cbd_datlen = 0;
204 /* wrap around buffer index when necessary */
205 if ((rxIdx + 1) >= PKTBUFSRX) {
206 rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
210 rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
218 static int fec_init(struct eth_device* dev, bd_t *bis)
220 struct ether_fcc_info_s * info = dev->priv;
222 volatile immap_t *immr = (immap_t *)CFG_IMMR;
223 volatile cpm8260_t *cp = &(immr->im_cpm);
224 fcc_enet_t *pram_ptr;
225 unsigned long mem_addr;
231 /* 28.9 - (1-2): ioports have been set up already */
233 /* 28.9 - (3): connect FCC's tx and rx clocks */
234 immr->im_cpmux.cmx_uar = 0;
235 immr->im_cpmux.cmx_fcr = (immr->im_cpmux.cmx_fcr & ~info->cmxfcr_mask) |
238 /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */
239 immr->im_fcc[info->ether_index].fcc_gfmr =
240 FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
242 /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet */
243 immr->im_fcc[info->ether_index].fcc_fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC;
245 /* 28.9 - (6): FDSR: Ethernet Syn */
246 immr->im_fcc[info->ether_index].fcc_fdsr = 0xD555;
248 /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */
252 /* Setup Receiver Buffer Descriptors */
253 for (i = 0; i < PKTBUFSRX; i++)
255 rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
256 rtx.rxbd[i].cbd_datlen = 0;
257 rtx.rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
259 rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
261 /* Setup Ethernet Transmitter Buffer Descriptors */
262 for (i = 0; i < TX_BUF_CNT; i++)
264 rtx.txbd[i].cbd_sc = (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
265 rtx.txbd[i].cbd_datlen = 0;
266 rtx.txbd[i].cbd_bufaddr = (uint)&txbuf[i][0];
268 rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
270 /* 28.9 - (7): initialise parameter ram */
271 pram_ptr = (fcc_enet_t *)&(immr->im_dprambase[info->proff_enet]);
273 /* clear whole structure to make sure all reserved fields are zero */
274 memset((void*)pram_ptr, 0, sizeof(fcc_enet_t));
277 * common Parameter RAM area
279 * Allocate space in the reserved FCC area of DPRAM for the
280 * internal buffers. No one uses this space (yet), so we
281 * can do this. Later, we will add resource management for
284 mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64);
285 pram_ptr->fen_genfcc.fcc_riptr = mem_addr;
286 pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32;
288 * Set maximum bytes per receive buffer.
289 * It must be a multiple of 32.
291 pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
292 pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB |
293 CFG_CPMFCR_RAMTYPE) << 24;
294 pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
295 pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB |
296 CFG_CPMFCR_RAMTYPE) << 24;
297 pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]);
299 /* protocol-specific area */
300 pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */
301 pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */
302 pram_ptr->fen_retlim = 15; /* Retry limit threshold */
303 pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
305 * Set Ethernet station address.
307 * This is supplied in the board information structure, so we
308 * copy that into the controller.
309 * So, far we have only been given one Ethernet address. We make
310 * it unique by setting a few bits in the upper byte of the
311 * non-static part of the address.
313 #define ea eth_get_dev()->enetaddr
314 pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4];
315 pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2];
316 pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0];
318 pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */
319 /* pad pointer. use tiptr since we don't need a specific padding char */
320 pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr;
321 pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length */
322 pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length */
323 pram_ptr->fen_rfthr = 1;
324 pram_ptr->fen_rfcnt = 1;
326 printf("pram_ptr->fen_genfcc.fcc_rbase %08lx\n",
327 pram_ptr->fen_genfcc.fcc_rbase);
328 printf("pram_ptr->fen_genfcc.fcc_tbase %08lx\n",
329 pram_ptr->fen_genfcc.fcc_tbase);
332 /* 28.9 - (8): clear out events in FCCE */
333 immr->im_fcc[info->ether_index].fcc_fcce = ~0x0;
335 /* 28.9 - (9): FCCM: mask all events */
336 immr->im_fcc[info->ether_index].fcc_fccm = 0;
338 /* 28.9 - (10-12): we don't use ethernet interrupts */
342 * Let's re-initialize the channel now. We have to do it later
343 * than the manual describes because we have just now finished
344 * the BD initialization.
346 cp->cp_cpcr = mk_cr_cmd(info->cpm_cr_enet_page,
347 info->cpm_cr_enet_sblock,
349 CPM_CR_INIT_TRX) | CPM_CR_FLG;
351 __asm__ __volatile__ ("eieio");
352 } while (cp->cp_cpcr & CPM_CR_FLG);
354 /* 28.9 - (14): enable tx/rx in gfmr */
355 immr->im_fcc[info->ether_index].fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
360 static void fec_halt(struct eth_device* dev)
362 struct ether_fcc_info_s * info = dev->priv;
363 volatile immap_t *immr = (immap_t *)CFG_IMMR;
365 /* write GFMR: disable tx/rx */
366 immr->im_fcc[info->ether_index].fcc_gfmr &=
367 ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
370 int fec_initialize(bd_t *bis)
372 struct eth_device* dev;
375 for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
377 dev = (struct eth_device*) malloc(sizeof *dev);
378 memset(dev, 0, sizeof *dev);
380 sprintf(dev->name, "FCC%d ETHERNET",
381 ether_fcc_info[i].ether_index + 1);
382 dev->priv = ðer_fcc_info[i];
383 dev->init = fec_init;
384 dev->halt = fec_halt;
385 dev->send = fec_send;
386 dev->recv = fec_recv;
394 #ifdef CONFIG_ETHER_LOOPBACK_TEST
396 #define ELBT_BUFSZ 1024 /* must be multiple of 32 */
400 #define ELBT_NRXBD 4 /* must be at least 2 */
403 #define ELBT_MAXRXERR 32
404 #define ELBT_MAXTXERR 32
406 #define ELBT_CLSWAIT 1000 /* msec to wait for further input frames */
417 uint _l, _f, m, bc, mc, lg, no, sh, cr, ov, cl;
418 uint badsrc, badtyp, badlen, badbit;
422 static elbt_prdesc rxeacc_descs[] = {
423 { offsetof(elbt_rxeacc, _l), "Not Last in Frame" },
424 { offsetof(elbt_rxeacc, _f), "Not First in Frame" },
425 { offsetof(elbt_rxeacc, m), "Address Miss" },
426 { offsetof(elbt_rxeacc, bc), "Broadcast Address" },
427 { offsetof(elbt_rxeacc, mc), "Multicast Address" },
428 { offsetof(elbt_rxeacc, lg), "Frame Length Violation"},
429 { offsetof(elbt_rxeacc, no), "Non-Octet Alignment" },
430 { offsetof(elbt_rxeacc, sh), "Short Frame" },
431 { offsetof(elbt_rxeacc, cr), "CRC Error" },
432 { offsetof(elbt_rxeacc, ov), "Overrun" },
433 { offsetof(elbt_rxeacc, cl), "Collision" },
434 { offsetof(elbt_rxeacc, badsrc), "Bad Src Address" },
435 { offsetof(elbt_rxeacc, badtyp), "Bad Frame Type" },
436 { offsetof(elbt_rxeacc, badlen), "Bad Frame Length" },
437 { offsetof(elbt_rxeacc, badbit), "Data Compare Errors" },
439 static int rxeacc_ndesc = sizeof (rxeacc_descs) / sizeof (rxeacc_descs[0]);
443 uint def, hb, lc, rl, rc, un, csl;
447 static elbt_prdesc txeacc_descs[] = {
448 { offsetof(elbt_txeacc, def), "Defer Indication" },
449 { offsetof(elbt_txeacc, hb), "Heartbeat" },
450 { offsetof(elbt_txeacc, lc), "Late Collision" },
451 { offsetof(elbt_txeacc, rl), "Retransmission Limit" },
452 { offsetof(elbt_txeacc, rc), "Retry Count" },
453 { offsetof(elbt_txeacc, un), "Underrun" },
454 { offsetof(elbt_txeacc, csl), "Carrier Sense Lost" },
456 static int txeacc_ndesc = sizeof (txeacc_descs) / sizeof (txeacc_descs[0]);
460 uchar rxbufs[ELBT_NRXBD][ELBT_BUFSZ];
461 uchar txbufs[ELBT_NTXBD][ELBT_BUFSZ];
462 cbd_t rxbd[ELBT_NRXBD];
463 cbd_t txbd[ELBT_NTXBD];
464 enum { Idle, Running, Closing, Closed } state;
465 int proff, page, sblock;
466 uint clstime, nsent, ntxerr, nrcvd, nrxerr;
467 ushort rxerrs[ELBT_MAXRXERR], txerrs[ELBT_MAXTXERR];
470 } __attribute__ ((aligned(8)))
473 static uchar patbytes[ELBT_NTXBD] = {
474 0xff, 0xaa, 0x55, 0x00
476 static uint patwords[ELBT_NTXBD] = {
477 0xffffffff, 0xaaaaaaaa, 0x55555555, 0x00000000
481 static elbt_chan elbt_chans[3] __attribute__ ((aligned(8)));
483 #error "elbt_chans must be 64-bit aligned"
486 #define CPM_CR_GRACEFUL_STOP_TX ((ushort)0x0005)
488 static elbt_prdesc epram_descs[] = {
489 { offsetof(fcc_enet_t, fen_crcec), "CRC Errors" },
490 { offsetof(fcc_enet_t, fen_alec), "Alignment Errors" },
491 { offsetof(fcc_enet_t, fen_disfc), "Discarded Frames" },
492 { offsetof(fcc_enet_t, fen_octc), "Octets" },
493 { offsetof(fcc_enet_t, fen_colc), "Collisions" },
494 { offsetof(fcc_enet_t, fen_broc), "Broadcast Frames" },
495 { offsetof(fcc_enet_t, fen_mulc), "Multicast Frames" },
496 { offsetof(fcc_enet_t, fen_uspc), "Undersize Frames" },
497 { offsetof(fcc_enet_t, fen_frgc), "Fragments" },
498 { offsetof(fcc_enet_t, fen_ospc), "Oversize Frames" },
499 { offsetof(fcc_enet_t, fen_jbrc), "Jabbers" },
500 { offsetof(fcc_enet_t, fen_p64c), "64 Octet Frames" },
501 { offsetof(fcc_enet_t, fen_p65c), "65-127 Octet Frames" },
502 { offsetof(fcc_enet_t, fen_p128c), "128-255 Octet Frames" },
503 { offsetof(fcc_enet_t, fen_p256c), "256-511 Octet Frames" },
504 { offsetof(fcc_enet_t, fen_p512c), "512-1023 Octet Frames" },
505 { offsetof(fcc_enet_t, fen_p1024c), "1024-1518 Octet Frames"},
507 static int epram_ndesc = sizeof (epram_descs) / sizeof (epram_descs[0]);
510 * given an elbt_prdesc array and an array of base addresses, print
511 * each prdesc down the screen with the values fetched from each
512 * base address across the screen
515 print_desc (elbt_prdesc descs[], int ndesc, uchar *bases[], int nbase)
517 elbt_prdesc *dp = descs, *edp = dp + ndesc;
522 for (i = 0; i < nbase; i++)
523 printf (" Channel %d", i);
529 printf ("%-32s", dp->lab);
531 for (i = 0; i < nbase; i++) {
532 uint val = *(uint *)(bases[i] + dp->off);
534 printf (" %10u", val);
544 * return number of bits that are set in a value; value contains
545 * nbits (right-justified) bits.
547 static uint __inline__
548 nbs (uint value, uint nbits)
552 uint pos = sizeof (uint) * 8;
554 __asm__ __volatile__ ("\
556 1: rlwnm. %2,%1,%4,31,31\n\
562 : "r"(value), "r"(nbits), "r"(cnt), "r"(pos)
578 badbits (uchar *bp, int n, ulong pat)
583 while (n > 0 && ((ulong)bp & (sizeof (ulong) - 1)) != 0) {
586 diff = *bp++ ^ (uchar)pat;
589 cnt += nbs ((ulong)diff, 8);
595 nl = n / sizeof (ulong);
596 n -= nl * sizeof (ulong);
604 cnt += nbs (diff, 32);
614 diff = *bp++ ^ (uchar)pat;
617 cnt += nbs ((ulong)diff, 8);
625 static inline unsigned short
626 swap16 (unsigned short x)
628 return (((x & 0xff) << 8) | ((x & 0xff00) >> 8));
632 eth_loopback_test (void)
634 DECLARE_GLOBAL_DATA_PTR;
636 volatile immap_t *immr = (immap_t *)CFG_IMMR;
637 volatile cpm8260_t *cp = &(immr->im_cpm);
639 ulong runtime, nmsec;
642 puts ("FCC Ethernet External loopback test\n");
644 memcpy (NetOurEther, gd->bd->bi_enetaddr, 6);
647 * global initialisations for all FCC channels
650 /* 28.9 - (1-2): ioports have been set up already */
652 #if defined(CONFIG_HYMOD)
654 * Attention: this is board-specific
659 # define FCC_START_LOOP 0
660 # define FCC_END_LOOP 2
663 * Attention: this is board-specific
664 * - FCC1 Rx-CLK is CLK10
665 * - FCC1 Tx-CLK is CLK11
666 * - FCC2 Rx-CLK is CLK13
667 * - FCC2 Tx-CLK is CLK14
668 * - FCC3 Rx-CLK is CLK15
669 * - FCC3 Tx-CLK is CLK16
672 /* 28.9 - (3): connect FCC's tx and rx clocks */
673 immr->im_cpmux.cmx_uar = 0;
674 immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
675 CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
676 CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
677 #elif defined(CONFIG_SBC8260) || defined(CONFIG_SACSng)
679 * Attention: this is board-specific
682 # define FCC_START_LOOP 1
683 # define FCC_END_LOOP 1
686 * Attention: this is board-specific
687 * - FCC2 Rx-CLK is CLK13
688 * - FCC2 Tx-CLK is CLK14
691 /* 28.9 - (3): connect FCC's tx and rx clocks */
692 immr->im_cpmux.cmx_uar = 0;
693 immr->im_cpmux.cmx_fcr = CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14;
695 #error "eth_loopback_test not supported on your board"
698 puts ("Initialise FCC channels:");
700 for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
701 elbt_chan *ecp = &elbt_chans[c];
702 volatile fcc_t *fcp = &immr->im_fcc[c];
703 volatile fcc_enet_t *fpp;
708 * initialise channel data
713 memset ((void *)ecp, 0, sizeof (*ecp));
720 ecp->proff = PROFF_FCC1;
721 ecp->page = CPM_CR_FCC1_PAGE;
722 ecp->sblock = CPM_CR_FCC1_SBLOCK;
726 ecp->proff = PROFF_FCC2;
727 ecp->page = CPM_CR_FCC2_PAGE;
728 ecp->sblock = CPM_CR_FCC2_SBLOCK;
732 ecp->proff = PROFF_FCC3;
733 ecp->page = CPM_CR_FCC3_PAGE;
734 ecp->sblock = CPM_CR_FCC3_SBLOCK;
739 * set up tx buffers and bds
742 for (i = 0; i < ELBT_NTXBD; i++) {
743 cbd_t *bdp = &ecp->txbd[i];
744 uchar *bp = &ecp->txbufs[i][0];
746 bdp->cbd_bufaddr = (uint)bp;
748 bdp->cbd_datlen = ELBT_BUFSZ - ELBT_CRCSZ;
749 bdp->cbd_sc = BD_ENET_TX_READY | BD_ENET_TX_PAD | \
750 BD_ENET_TX_LAST | BD_ENET_TX_TC;
752 memset ((void *)bp, patbytes[i], ELBT_BUFSZ);
753 NetSetEther (bp, NetBcastAddr, 0x8000);
755 ecp->txbd[ELBT_NTXBD - 1].cbd_sc |= BD_ENET_TX_WRAP;
758 * set up rx buffers and bds
761 for (i = 0; i < ELBT_NRXBD; i++) {
762 cbd_t *bdp = &ecp->rxbd[i];
763 uchar *bp = &ecp->rxbufs[i][0];
765 bdp->cbd_bufaddr = (uint)bp;
767 bdp->cbd_sc = BD_ENET_RX_EMPTY;
769 memset ((void *)bp, 0, ELBT_BUFSZ);
771 ecp->rxbd[ELBT_NRXBD - 1].cbd_sc |= BD_ENET_RX_WRAP;
774 * set up the FCC channel hardware
777 /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */
778 fcp->fcc_gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
780 /* 28.9 - (5): FPSMR: fd, enet CRC, Promis, RMON, Rx SHort */
781 fcp->fcc_fpsmr = FCC_PSMR_FDE | FCC_PSMR_LPB | \
782 FCC_PSMR_ENCRC | FCC_PSMR_PRO | \
783 FCC_PSMR_MON | FCC_PSMR_RSH;
785 /* 28.9 - (6): FDSR: Ethernet Syn */
786 fcp->fcc_fdsr = 0xD555;
788 /* 29.9 - (7): initialise parameter ram */
789 fpp = (fcc_enet_t *)&(immr->im_dprambase[ecp->proff]);
791 /* clear whole struct to make sure all resv fields are zero */
792 memset ((void *)fpp, 0, sizeof (fcc_enet_t));
795 * common Parameter RAM area
797 * Allocate space in the reserved FCC area of DPRAM for the
798 * internal buffers. No one uses this space (yet), so we
799 * can do this. Later, we will add resource management for
802 addr = CPM_FCC_SPECIAL_BASE + (c * 64);
803 fpp->fen_genfcc.fcc_riptr = addr;
804 fpp->fen_genfcc.fcc_tiptr = addr + 32;
807 * Set maximum bytes per receive buffer.
808 * It must be a multiple of 32.
809 * buffers are in 60x bus memory.
811 fpp->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
812 fpp->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
813 fpp->fen_genfcc.fcc_rbase = (unsigned int)(&ecp->rxbd[0]);
814 fpp->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
815 fpp->fen_genfcc.fcc_tbase = (unsigned int)(&ecp->txbd[0]);
817 /* protocol-specific area */
818 fpp->fen_cmask = 0xdebb20e3; /* CRC mask */
819 fpp->fen_cpres = 0xffffffff; /* CRC preset */
820 fpp->fen_retlim = 15; /* Retry limit threshold */
821 fpp->fen_mflr = PKT_MAXBUF_SIZE;/* max frame length register */
824 * Set Ethernet station address.
826 * This is supplied in the board information structure, so we
827 * copy that into the controller.
828 * So, far we have only been given one Ethernet address. We use
829 * the same address for all channels
831 #define ea gd->bd->bi_enetaddr
832 fpp->fen_paddrh = (ea[5] << 8) + ea[4];
833 fpp->fen_paddrm = (ea[3] << 8) + ea[2];
834 fpp->fen_paddrl = (ea[1] << 8) + ea[0];
837 fpp->fen_minflr = PKT_MINBUF_SIZE; /* min frame len register */
839 * pad pointer. use tiptr since we don't need
840 * a specific padding char
842 fpp->fen_padptr = fpp->fen_genfcc.fcc_tiptr;
843 fpp->fen_maxd1 = PKT_MAXDMA_SIZE; /* max DMA1 length */
844 fpp->fen_maxd2 = PKT_MAXDMA_SIZE; /* max DMA2 length */
848 /* 28.9 - (8): clear out events in FCCE */
849 fcp->fcc_fcce = ~0x0;
851 /* 28.9 - (9): FCCM: mask all events */
854 /* 28.9 - (10-12): we don't use ethernet interrupts */
858 * Let's re-initialize the channel now. We have to do it later
859 * than the manual describes because we have just now finished
860 * the BD initialization.
862 cp->cp_cpcr = mk_cr_cmd (ecp->page, ecp->sblock, \
863 0x0c, CPM_CR_INIT_TRX) | CPM_CR_FLG;
865 __asm__ __volatile__ ("eieio");
866 } while (cp->cp_cpcr & CPM_CR_FLG);
869 puts (" done\nStarting test... (Ctrl-C to Finish)\n");
872 * Note: don't want serial output from here until the end of the
873 * test - the delays would probably stuff things up.
877 runtime = get_timer (0);
882 for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
883 volatile fcc_t *fcp = &immr->im_fcc[c];
884 elbt_chan *ecp = &elbt_chans[c];
887 switch (ecp->state) {
891 * set the channel Running ...
894 /* 28.9 - (14): enable tx/rx in gfmr */
895 fcp->fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
897 ecp->state = Running;
902 * (while Running only) check for
903 * termination of the test
910 * initiate a "graceful stop transmit"
913 cp->cp_cpcr = mk_cr_cmd (ecp->page, \
915 CPM_CR_GRACEFUL_STOP_TX) | \
918 __asm__ __volatile__ ("eieio");
919 } while (cp->cp_cpcr & CPM_CR_FLG);
921 ecp->clstime = get_timer (0);
922 ecp->state = Closing;
924 /* fall through ... */
928 * (while Running or Closing) poll the channel:
929 * - check for any non-READY tx buffers and
931 * - check for any non-EMPTY rx buffers and
932 * check that they were received correctly,
933 * adjust counters etc, then make empty
936 for (i = 0; i < ELBT_NTXBD; i++) {
937 cbd_t *bdp = &ecp->txbd[i];
938 ushort sc = bdp->cbd_sc;
940 if ((sc & BD_ENET_TX_READY) != 0)
944 * this frame has finished
949 if (sc & BD_ENET_TX_STATS) {
957 if (n < ELBT_MAXTXERR)
960 if (sc & BD_ENET_TX_DEF)
962 if (sc & BD_ENET_TX_HB)
964 if (sc & BD_ENET_TX_LC)
966 if (sc & BD_ENET_TX_RL)
968 if (sc & BD_ENET_TX_RCMASK)
970 if (sc & BD_ENET_TX_UN)
972 if (sc & BD_ENET_TX_CSL)
979 if (ecp->state == Closing)
980 ecp->clstime = get_timer (0);
982 /* make it ready again */
983 bdp->cbd_sc |= BD_ENET_TX_READY;
986 for (i = 0; i < ELBT_NRXBD; i++) {
987 cbd_t *bdp = &ecp->rxbd[i];
988 ushort sc = bdp->cbd_sc, mask;
990 if ((sc & BD_ENET_RX_EMPTY) != 0)
993 /* we have a new frame in this buffer */
996 mask = BD_ENET_RX_LAST|BD_ENET_RX_FIRST;
997 if ((sc & mask) != mask) {
998 /* somethings wrong here ... */
999 if (!(sc & BD_ENET_RX_LAST))
1001 if (!(sc & BD_ENET_RX_FIRST))
1005 if (sc & BD_ENET_RX_STATS) {
1009 * we had some sort of error
1013 if (n < ELBT_MAXRXERR)
1014 ecp->rxerrs[n] = sc;
1016 if (sc & BD_ENET_RX_MISS)
1018 if (sc & BD_ENET_RX_BC)
1020 if (sc & BD_ENET_RX_MC)
1022 if (sc & BD_ENET_RX_LG)
1024 if (sc & BD_ENET_RX_NO)
1026 if (sc & BD_ENET_RX_SH)
1028 if (sc & BD_ENET_RX_CR)
1030 if (sc & BD_ENET_RX_OV)
1032 if (sc & BD_ENET_RX_CL)
1039 ushort datlen = bdp->cbd_datlen;
1042 int ours, tb, n, nbytes;
1044 ehp = (Ethernet_t *) \
1047 ours = memcmp (ehp->et_src, \
1050 prot = swap16 (ehp->et_protlen);
1054 nbytes = ELBT_BUFSZ - \
1055 offsetof (Ethernet_t, \
1059 /* check the frame is correct */
1060 if (datlen != ELBT_BUFSZ)
1061 ecp->rxeacc.badlen++;
1063 ecp->rxeacc.badsrc++;
1064 else if (!tb || n >= ELBT_NTXBD)
1065 ecp->rxeacc.badtyp++;
1076 ecp->rxeacc.badbit += \
1081 if (ecp->state == Closing)
1082 ecp->clstime = get_timer (0);
1084 /* make it empty again */
1085 bdp->cbd_sc |= BD_ENET_RX_EMPTY;
1088 if (ecp->state != Closing)
1092 * (while Closing) check to see if
1093 * waited long enough
1096 if (get_timer (ecp->clstime) >= ELBT_CLSWAIT) {
1097 /* write GFMR: disable tx/rx */
1099 ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
1100 ecp->state = Closed;
1111 } while (nclosed < (FCC_END_LOOP - FCC_START_LOOP + 1));
1113 runtime = get_timer (runtime);
1114 if (runtime <= ELBT_CLSWAIT) {
1115 printf ("Whoops! somehow elapsed time (%ld) is wrong (<= %d)\n",
1116 runtime, ELBT_CLSWAIT);
1119 nmsec = runtime - ELBT_CLSWAIT;
1121 printf ("Test Finished in %ldms (plus %dms close wait period)!\n\n",
1122 nmsec, ELBT_CLSWAIT);
1128 for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
1129 elbt_chan *ecp = &elbt_chans[c];
1130 uint rxpps, txpps, nerr;
1132 rxpps = (ecp->nrcvd * 1000) / nmsec;
1133 txpps = (ecp->nsent * 1000) / nmsec;
1135 printf ("Channel %d: %d rcvd (%d pps, %d rxerrs), "
1136 "%d sent (%d pps, %d txerrs)\n\n", c,
1137 ecp->nrcvd, rxpps, ecp->nrxerr,
1138 ecp->nsent, txpps, ecp->ntxerr);
1140 if ((nerr = ecp->nrxerr) > 0) {
1143 printf ("\tFirst %d rx errs:", nerr);
1144 for (i = 0; i < nerr; i++)
1145 printf (" %04x", ecp->rxerrs[i]);
1149 if ((nerr = ecp->ntxerr) > 0) {
1152 printf ("\tFirst %d tx errs:", nerr);
1153 for (i = 0; i < nerr; i++)
1154 printf (" %04x", ecp->txerrs[i]);
1159 puts ("Receive Error Counts:\n");
1160 for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
1161 bases[c] = (uchar *)&elbt_chans[c].rxeacc;
1162 print_desc (rxeacc_descs, rxeacc_ndesc, bases, 3);
1164 puts ("\nTransmit Error Counts:\n");
1165 for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
1166 bases[c] = (uchar *)&elbt_chans[c].txeacc;
1167 print_desc (txeacc_descs, txeacc_ndesc, bases, 3);
1169 puts ("\nRMON(-like) Counters:\n");
1170 for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
1171 bases[c] = (uchar *)&immr->im_dprambase[elbt_chans[c].proff];
1172 print_desc (epram_descs, epram_ndesc, bases, 3);
1175 #endif /* CONFIG_ETHER_LOOPBACK_TEST */
1177 #endif /* CONFIG_ETHER_ON_FCC && CFG_CMD_NET && CONFIG_NET_MULTI */