configs/sama5d4ek_nandflash_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_AT91=y
   3 CONFIG_TARGET_SAMA5D4EK=y
   4 CONFIG_SPL_GPIO_SUPPORT=y
   5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   7 CONFIG_SYS_MALLOC_F_LEN=0x2000
   8 CONFIG_SPL_SERIAL_SUPPORT=y
   9 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
  10 CONFIG_SPL_NAND_SUPPORT=y
  11 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek"
  12 CONFIG_FIT=y
  13 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
  14 CONFIG_BOOTDELAY=3
  15 # CONFIG_CONSOLE_MUX is not set
  16 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  17 # CONFIG_DISPLAY_BOARDINFO is not set
  18 CONFIG_SPL=y
  19 CONFIG_HUSH_PARSER=y
  20 CONFIG_CMD_BOOTZ=y
  21 # CONFIG_CMD_IMI is not set
  22 # CONFIG_CMD_IMLS is not set
  23 # CONFIG_CMD_LOADS is not set
  24 # CONFIG_CMD_FLASH is not set
  25 CONFIG_CMD_MMC=y
  26 CONFIG_CMD_SF=y
  27 CONFIG_CMD_USB=y
  28 # CONFIG_CMD_FPGA is not set
  29 CONFIG_CMD_DHCP=y
  30 CONFIG_CMD_PING=y
  31 CONFIG_CMD_FAT=y
  32 CONFIG_OF_CONTROL=y
  33 CONFIG_SPL_OF_CONTROL=y
  34 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
  35 CONFIG_DM=y
  36 CONFIG_SPL_DM=y
  37 CONFIG_SPL_DM_SEQ_ALIAS=y
  38 CONFIG_CLK=y
  39 CONFIG_SPL_CLK=y
  40 CONFIG_CLK_AT91=y
  41 CONFIG_AT91_UTMI=y
  42 CONFIG_AT91_H32MX=y
  43 CONFIG_DM_GPIO=y
  44 CONFIG_AT91_GPIO=y
  45 CONFIG_DM_MMC=y
  46 CONFIG_GENERIC_ATMEL_MCI=y
  47 CONFIG_DM_SPI_FLASH=y
  48 CONFIG_SPI_FLASH=y
  49 CONFIG_SPI_FLASH_ATMEL=y
  50 CONFIG_DM_ETH=y
  51 CONFIG_MACB=y
  52 CONFIG_PINCTRL=y
  53 CONFIG_SPL_PINCTRL=y
  54 CONFIG_PINCTRL_AT91=y
  55 CONFIG_DM_SERIAL=y
  56 CONFIG_DEBUG_UART=y
  57 CONFIG_DEBUG_UART_ATMEL=y
  58 CONFIG_DEBUG_UART_BASE=0xfc00c000
  59 CONFIG_DEBUG_UART_CLOCK=88000000
  60 CONFIG_DEBUG_UART_BOARD_INIT=y
  61 CONFIG_DEBUG_UART_ANNOUNCE=y
  62 CONFIG_ATMEL_USART=y
  63 CONFIG_DM_SPI=y
  64 CONFIG_ATMEL_SPI=y
  65 CONFIG_USB=y
  66 CONFIG_DM_USB=y
  67 CONFIG_USB_EHCI_HCD=y
  68 CONFIG_USB_STORAGE=y
  69 CONFIG_USB_GADGET=y
  70 CONFIG_USB_GADGET_ATMEL_USBA=y
  71 CONFIG_LCD=y