configs/mx6cuboxi_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_MX6=y
   3 CONFIG_SYS_TEXT_BASE=0x17800000
   4 CONFIG_SPL_GPIO_SUPPORT=y
   5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   7 CONFIG_TARGET_MX6CUBOXI=y
   8 CONFIG_SPL_MMC_SUPPORT=y
   9 CONFIG_SPL_SERIAL_SUPPORT=y
  10 CONFIG_ENV_SIZE=0x2000
  11 CONFIG_ENV_OFFSET=0xFE000
  12 CONFIG_NR_DRAM_BANKS=1
  13 CONFIG_SPL=y
  14 CONFIG_SPL_LIBDISK_SUPPORT=y
  15 # CONFIG_CMD_BMODE is not set
  16 CONFIG_CMD_HDMIDETECT=y
  17 CONFIG_AHCI=y
  18 CONFIG_SPL_TEXT_BASE=0x00908000
  19 CONFIG_DISTRO_DEFAULTS=y
  20 CONFIG_FIT=y
  21 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
  22 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
  23 CONFIG_USE_PREBOOT=y
  24 CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin  serial,usbkbd; setenv stdout serial,vga; setenv stderr serial,vga; else setenv stdin  serial; setenv stdout serial; setenv stderr serial; fi;"
  25 CONFIG_BOUNCE_BUFFER=y
  26 CONFIG_BOARD_EARLY_INIT_F=y
  27 CONFIG_SPL_FS_EXT4=y
  28 CONFIG_SPL_I2C_SUPPORT=y
  29 CONFIG_SPL_WATCHDOG_SUPPORT=y
  30 CONFIG_CMD_GPIO=y
  31 CONFIG_CMD_MMC=y
  32 # CONFIG_CMD_PINMUX is not set
  33 CONFIG_CMD_SATA=y
  34 CONFIG_CMD_USB=y
  35 CONFIG_CMD_CACHE=y
  36 CONFIG_CMD_EXT4_WRITE=y
  37 # CONFIG_SPL_PARTITION_UUIDS is not set
  38 CONFIG_OF_CONTROL=y
  39 CONFIG_DEFAULT_DEVICE_TREE="imx6dl-hummingboard2-emmc-som-v15"
  40 CONFIG_OF_LIST="imx6dl-hummingboard2-emmc-som-v15 imx6q-hummingboard2-emmc-som-v15"
  41 CONFIG_MULTI_DTB_FIT=y
  42 CONFIG_ENV_IS_IN_MMC=y
  43 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  44 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
  45 CONFIG_NET_RANDOM_ETHADDR=y
  46 CONFIG_DM=y
  47 CONFIG_DWC_AHSATA=y
  48 CONFIG_DM_GPIO=y
  49 CONFIG_DM_MMC=y
  50 CONFIG_FSL_USDHC=y
  51 CONFIG_PHYLIB=y
  52 CONFIG_MII=y
  53 CONFIG_PINCTRL=y
  54 CONFIG_PINCTRL_IMX6=y
  55 CONFIG_DM_REGULATOR=y
  56 CONFIG_DM_REGULATOR_FIXED=y
  57 CONFIG_DM_THERMAL=y
  58 CONFIG_USB=y
  59 CONFIG_DM_USB=y
  60 CONFIG_USB_KEYBOARD=y
  61 CONFIG_VIDEO_IPUV3=y
  62 CONFIG_VIDEO=y
  63 # CONFIG_VIDEO_SW_CURSOR is not set