x86: qemu: Fix build warnings with CONFIG_DISTRO_DEFAULTS=n
[oweals/u-boot.git] / configs / ls1021aqds_nand_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_LS1021AQDS=y
3 CONFIG_SYS_TEXT_BASE=0x82000000
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_SPL_SERIAL_SUPPORT=y
7 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
8 CONFIG_NR_DRAM_BANKS=1
9 CONFIG_SPL=y
10 CONFIG_AHCI=y
11 CONFIG_FIT=y
12 CONFIG_FIT_VERBOSE=y
13 CONFIG_OF_BOARD_SETUP=y
14 CONFIG_OF_STDOUT_VIA_ALIAS=y
15 CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND_BOOT"
16 CONFIG_NAND_BOOT=y
17 CONFIG_BOOTDELAY=3
18 CONFIG_SILENT_CONSOLE=y
19 # CONFIG_CONSOLE_MUX is not set
20 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
21 CONFIG_MISC_INIT_R=y
22 CONFIG_SPL_TEXT_BASE=0x10000000
23 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
24 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
25 CONFIG_SPL_ENV_SUPPORT=y
26 CONFIG_SPL_I2C_SUPPORT=y
27 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
28 CONFIG_SPL_NAND_SUPPORT=y
29 CONFIG_SPL_WATCHDOG_SUPPORT=y
30 CONFIG_HUSH_PARSER=y
31 CONFIG_CMD_BOOTZ=y
32 CONFIG_CMD_IMLS=y
33 CONFIG_CMD_GREPENV=y
34 CONFIG_CMD_MEMINFO=y
35 CONFIG_CMD_MEMTEST=y
36 CONFIG_CMD_GPT=y
37 CONFIG_CMD_I2C=y
38 CONFIG_CMD_MMC=y
39 CONFIG_CMD_NAND=y
40 CONFIG_CMD_USB=y
41 # CONFIG_CMD_SETEXPR is not set
42 CONFIG_CMD_DHCP=y
43 CONFIG_CMD_MII=y
44 CONFIG_CMD_PING=y
45 CONFIG_CMD_BMP=y
46 CONFIG_CMD_EXT2=y
47 CONFIG_CMD_FAT=y
48 # CONFIG_SPL_EFI_PARTITION is not set
49 CONFIG_OF_CONTROL=y
50 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
51 CONFIG_ENV_IS_IN_NAND=y
52 CONFIG_DM=y
53 CONFIG_SATA_CEVA=y
54 CONFIG_FSL_CAAM=y
55 CONFIG_SYS_FSL_DDR3=y
56 CONFIG_DM_MMC=y
57 CONFIG_FSL_ESDHC=y
58 CONFIG_MTD_NOR_FLASH=y
59 CONFIG_FLASH_CFI_DRIVER=y
60 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
61 CONFIG_SYS_FLASH_CFI=y
62 CONFIG_PHY_GIGE=y
63 CONFIG_E1000=y
64 CONFIG_MII=y
65 CONFIG_TSEC_ENET=y
66 CONFIG_PCI=y
67 CONFIG_DM_PCI=y
68 CONFIG_DM_PCI_COMPAT=y
69 CONFIG_PCIE_LAYERSCAPE=y
70 CONFIG_DM_SCSI=y
71 CONFIG_SYS_NS16550=y
72 CONFIG_USB=y
73 CONFIG_DM_USB=y
74 CONFIG_USB_XHCI_HCD=y
75 CONFIG_USB_XHCI_DWC3=y
76 CONFIG_USB_STORAGE=y
77 CONFIG_VIDEO_FSL_DCU_FB=y
78 CONFIG_VIDEO=y
79 # CONFIG_VIDEO_SW_CURSOR is not set