configs/ge_bx50v3_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_MX6=y
   3 CONFIG_SYS_TEXT_BASE=0x17800000
   4 CONFIG_TARGET_GE_BX50V3=y
   5 CONFIG_NR_DRAM_BANKS=1
   6 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
   7 CONFIG_FIT=y
   8 CONFIG_BOOTDELAY=1
   9 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  10 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
  11
  12 # monitor's EEPROM is connected to the bus through the mux channel 1
  13 # (the number is the offset in CONFIG_SYS_I2C_BUSES)
  14 CONFIG_SYS_VPD_EEPROM_I2C_BUS=4
  15 # Address of Atmel 24C08 EEPROM
  16 CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
  17 CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1
  18 CONFIG_SYS_VPD_EEPROM_SIZE=1024
  19
  20 CONFIG_SUPPORT_RAW_INITRD=y
  21 CONFIG_BOARD_EARLY_INIT_F=y
  22 CONFIG_LAST_STAGE_INIT=y
  23 CONFIG_HUSH_PARSER=y
  24 CONFIG_CMD_BOOTZ=y
  25 # CONFIG_CMD_FLASH is not set
  26 CONFIG_CMD_GPIO=y
  27 CONFIG_CMD_I2C=y
  28 CONFIG_CMD_MMC=y
  29 CONFIG_CMD_PCI=y
  30 CONFIG_CMD_SF=y
  31 # CONFIG_CMD_NFS is not set
  32 CONFIG_CMD_CACHE=y
  33 CONFIG_CMD_EXT2=y
  34 CONFIG_CMD_EXT4=y
  35 CONFIG_CMD_EXT4_WRITE=y
  36 CONFIG_CMD_FS_GENERIC=y
  37 CONFIG_DOS_PARTITION=y
  38 CONFIG_ENV_IS_IN_SPI_FLASH=y
  39 CONFIG_BOOTCOUNT_LIMIT=y
  40 CONFIG_BOOTCOUNT_EXT=y
  41 CONFIG_BOOTCOUNT_BOOTLIMIT=10
  42 CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
  43 CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
  44 CONFIG_FSL_ESDHC=y
  45 CONFIG_SPI_FLASH=y
  46 CONFIG_SPI_FLASH_STMICRO=y
  47 CONFIG_SPI_FLASH_WINBOND=y
  48 CONFIG_E1000=y
  49 CONFIG_CMD_E1000=y
  50 CONFIG_MII=y
  51 CONFIG_SPI=y
  52 CONFIG_MXC_SPI=y
  53 CONFIG_IMX_WATCHDOG=y
  54 CONFIG_OF_LIBFDT=y
  55 # CONFIG_EFI_LOADER is not set