arm64: zynqmp: Add support for zcu208
[oweals/u-boot.git] / configs / chiliboard_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_CPU_INIT=y
3 CONFIG_ARCH_OMAP2PLUS=y
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_AM33XX=y
7 CONFIG_TARGET_CHILIBOARD=y
8 CONFIG_SPL_MMC_SUPPORT=y
9 CONFIG_SPL_SERIAL_SUPPORT=y
10 CONFIG_ENV_SIZE=0x2000
11 CONFIG_ENV_OFFSET=0x20000
12 CONFIG_SPL=y
13 CONFIG_SPL_FS_FAT=y
14 CONFIG_SPL_LIBDISK_SUPPORT=y
15 CONFIG_DISTRO_DEFAULTS=y
16 CONFIG_BOOTDELAY=1
17 # CONFIG_USE_BOOTCOMMAND is not set
18 CONFIG_SYS_CONSOLE_INFO_QUIET=y
19 CONFIG_DEFAULT_FDT_FILE="am335x-chiliboard.dtb"
20 CONFIG_SPL_I2C_SUPPORT=y
21 CONFIG_SPL_POWER_SUPPORT=y
22 CONFIG_SPL_WATCHDOG_SUPPORT=y
23 CONFIG_CMD_ASKENV=y
24 # CONFIG_CMD_FLASH is not set
25 CONFIG_CMD_GPIO=y
26 CONFIG_CMD_I2C=y
27 CONFIG_CMD_MMC=y
28 CONFIG_CMD_NAND=y
29 CONFIG_CMD_USB=y
30 # CONFIG_CMD_SETEXPR is not set
31 CONFIG_CMD_EXT4_WRITE=y
32 CONFIG_CMD_MTDPARTS=y
33 CONFIG_MTDIDS_DEFAULT="nand0=8000000.nand"
34 CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nand:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)"
35 CONFIG_OF_CONTROL=y
36 CONFIG_DEFAULT_DEVICE_TREE="am335x-chiliboard"
37 CONFIG_ENV_IS_IN_MMC=y
38 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
39 CONFIG_ENV_OFFSET_REDUND=0x22000
40 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
41 CONFIG_BOOTCOUNT_LIMIT=y
42 CONFIG_DM_GPIO=y
43 CONFIG_MISC=y
44 CONFIG_DM_MMC=y
45 CONFIG_MMC_OMAP_HS=y
46 CONFIG_MTD=y
47 CONFIG_MTD_RAW_NAND=y
48 CONFIG_DM_ETH=y
49 CONFIG_MII=y
50 CONFIG_DRIVER_TI_CPSW=y
51 CONFIG_SPI=y
52 CONFIG_DM_SPI=y
53 CONFIG_OMAP3_SPI=y
54 CONFIG_TIMER=y
55 CONFIG_OMAP_TIMER=y
56 CONFIG_USB=y
57 CONFIG_DM_USB=y
58 CONFIG_USB_MUSB_HOST=y
59 CONFIG_USB_MUSB_TI=y
60 CONFIG_FAT_WRITE=y
61 CONFIG_LZO=y