configs: u200: enable support for USB Host & Gadget
[oweals/u-boot.git] / configs / at91sam9x5ek_spiflash_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_AT91=y
3 CONFIG_SYS_TEXT_BASE=0x26f00000
4 CONFIG_TARGET_AT91SAM9X5EK=y
5 CONFIG_SYS_MALLOC_F_LEN=0x2000
6 CONFIG_NR_DRAM_BANKS=1
7 CONFIG_DEBUG_UART_BOARD_INIT=y
8 CONFIG_DEBUG_UART_BASE=0xfffff200
9 CONFIG_DEBUG_UART_CLOCK=132000000
10 CONFIG_DEBUG_UART=y
11 CONFIG_FIT=y
12 CONFIG_SPI_BOOT=y
13 CONFIG_BOOTDELAY=3
14 CONFIG_USE_BOOTARGS=y
15 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs rw"
16 # CONFIG_CONSOLE_MUX is not set
17 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
18 # CONFIG_DISPLAY_BOARDINFO is not set
19 CONFIG_HUSH_PARSER=y
20 CONFIG_SYS_PROMPT="U-Boot> "
21 CONFIG_CMD_BOOTZ=y
22 # CONFIG_CMD_FLASH is not set
23 CONFIG_CMD_MMC=y
24 CONFIG_CMD_NAND=y
25 CONFIG_CMD_NAND_TRIMFFS=y
26 CONFIG_CMD_SF=y
27 CONFIG_CMD_USB=y
28 # CONFIG_CMD_SETEXPR is not set
29 CONFIG_CMD_DHCP=y
30 CONFIG_CMD_PING=y
31 CONFIG_CMD_FAT=y
32 CONFIG_CMD_MTDPARTS=y
33 CONFIG_CMD_UBI=y
34 CONFIG_OF_CONTROL=y
35 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
36 CONFIG_ENV_IS_IN_SPI_FLASH=y
37 CONFIG_DM=y
38 CONFIG_CLK=y
39 CONFIG_CLK_AT91=y
40 CONFIG_DM_GPIO=y
41 CONFIG_AT91_GPIO=y
42 CONFIG_DM_MMC=y
43 CONFIG_GENERIC_ATMEL_MCI=y
44 CONFIG_NAND=y
45 CONFIG_NAND_ATMEL=y
46 CONFIG_DM_SPI_FLASH=y
47 CONFIG_SPI_FLASH=y
48 CONFIG_SF_DEFAULT_SPEED=30000000
49 CONFIG_SPI_FLASH_ATMEL=y
50 CONFIG_DM_ETH=y
51 CONFIG_MACB=y
52 CONFIG_PINCTRL=y
53 CONFIG_PINCTRL_AT91=y
54 CONFIG_DM_SERIAL=y
55 CONFIG_DEBUG_UART_ATMEL=y
56 CONFIG_DEBUG_UART_ANNOUNCE=y
57 CONFIG_ATMEL_USART=y
58 CONFIG_SPI=y
59 CONFIG_DM_SPI=y
60 CONFIG_TIMER=y
61 CONFIG_ATMEL_PIT_TIMER=y
62 CONFIG_USB=y
63 CONFIG_DM_USB=y
64 CONFIG_USB_EHCI_HCD=y
65 CONFIG_USB_STORAGE=y
66 CONFIG_DM_VIDEO=y
67 CONFIG_ATMEL_HLCD=y