3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
28 # pick up any command line args to config
32 -d*) PREFIX="debug-";;
34 -h*) TEST="true"; cat <<EOF
35 Usage: config [options]
36 -d Add a debug- prefix to machine choice.
37 -t Test mode, do not run the Configure perl script.
40 Any other text will be passed to the Configure perl script.
41 See INSTALL for instructions.
45 *) options=$options" $i" ;;
49 # First get uname entries that we use below
51 MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
52 RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
53 SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
54 VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
57 # Now test for ISC and SCO, since it is has a braindamaged uname.
59 # We need to work around FreeBSD 1.1.5.1
61 XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
62 if [ "x$XREL" != "x" ]; then
63 if [ -f /etc/kconfig ]; then
66 echo "${MACHINE}-whatever-isc4"; exit 0
72 echo "whatever-whatever-sco3"; exit 0
75 echo "whatever-whatever-sco5"; exit 0
79 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
80 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
81 x2*) echo "whatever-whatever-unixware2"; exit 0 ;;
85 echo "i386-whatever-unixware1"; exit 0
89 # We hardcode i586 in place of ${MACHINE} for the
90 # following reason. The catch is that even though Pentium
91 # is minimum requirement for platforms in question,
92 # ${MACHINE} gets always assigned to i386. Now, problem
93 # with i386 is that it makes ./config pass 386 to
94 # ./Configure, which in turn makes make generate
95 # inefficient SHA-1 (for this moment) code.
96 x7*) echo "i586-sco-unixware7"; exit 0 ;;
97 x8*) echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
103 # Now we simply scan though... In most cases, the SYSTEM info is enough
105 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
107 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
108 echo "parisc-hp-MPE/iX"; exit 0
111 echo "m68k-apple-aux3"; exit 0
115 echo "${MACHINE}-ibm-aix"; exit 0
119 echo "${MACHINE}-ibm-aix"; exit 0
123 echo "${MACHINE}-ibm-aix3"; exit 0
127 echo "${MACHINE}-dg-dgux"; exit 0
131 echo "${MACHINE}-hi-hiux"; exit 0
135 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
137 1[0-9].*) # HPUX 10 and 11 targets are unified
138 echo "${MACHINE}-hp-hpux1x"; exit 0
141 echo "${MACHINE}-hp-hpux"; exit 0
147 echo "mips2-sgi-irix"; exit 0
151 echo "mips3-sgi-irix"; exit 0
155 echo "mips4-sgi-irix64"; exit 0
159 echo "${MACHINE}-whatever-linux2"; exit 0
163 echo "${MACHINE}-whatever-linux1"; exit 0
167 echo "hurd-x86"; exit 0;
171 echo "${MACHINE}-lynx-lynxos"; exit 0
174 BSD/OS:4.*) # BSD/OS always says 386
175 echo "i486-whatever-bsdi4"; exit 0
178 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
179 case `/sbin/sysctl -n hw.model` in
181 echo "i586-whatever-bsdi"; exit 0
184 echo "i386-whatever-bsdi"; exit 0
190 echo "${MACHINE}-whatever-bsdi"; exit 0
194 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
195 MACH=`sysctl -n hw.model`
198 *386* ) MACH="i386" ;;
199 *486* ) MACH="i486" ;;
200 Pentium\ II*) MACH="i686" ;;
201 Pentium* ) MACH="i586" ;;
202 * ) MACH="$MACHINE" ;;
205 i[0-9]86 ) ARCH="pc" ;;
207 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
211 echo "${MACHINE}-whatever-freebsd"; exit 0
215 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
219 echo "${MACHINE}-whatever-netbsd"; exit 0
223 echo "${MACHINE}-whatever-openbsd"; exit 0
227 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
231 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
234 echo "${MACHINE}-dec-tru64"; exit 0
237 echo "${MACHINE}-dec-osf"; exit 0
240 echo "${MACHINE}-dec-osf"; exit 0
248 echo "${MACHINE}-whatever-qnx4"
251 echo "${MACHINE}-whatever-qnx6"
254 echo "${MACHINE}-whatever-qnx"
261 echo "i860-intel-osf1"; exit 0
265 echo "ppc-apple-rhapsody"; exit 0
271 echo "ppc-apple-darwin${VERSION}"
274 echo "i386-apple-darwin${VERSION}"
281 echo "${MACHINE}-whatever-solaris2"; exit 0
285 echo "${MACHINE}-sun-sunos4"; exit 0
289 echo "${MACHINE}-whatever-sysv4"; exit 0
293 echo "i386-stratus-vos"; exit 0
297 echo "hppa1.1-stratus-vos"; exit 0
301 echo "${MACHINE}-whatever-sysv4"; exit 0
305 echo "${MACHINE}-whatever-sysv4"; exit 0
308 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*)
309 echo "i486-ncr-sysv4"; exit 0
313 echo "${MACHINE}-unknown-ultrix"; exit 0
317 echo "${MACHINE}-siemens-sysv4"; exit 0
321 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
325 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
329 echo "${MACHINE}-ncr-sysv4"; exit 0
333 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
337 echo "mips-sony-newsos4"; exit 0;
343 echo "${MACHINE}-whatever-cygwin_pre1.3"
346 echo "${MACHINE}-whatever-cygwin"
353 echo "t3e-cray-unicosmk"; exit 0;
357 echo "j90-cray-unicos"; exit 0;
361 echo "nsr-tandem-nsk"; exit 0;
366 # Ugg. These are all we can determine by what we know about
367 # the output of uname. Be more creative:
370 # Do the Apollo stuff first. Here, we just simply assume
371 # that the existance of the /usr/apollo directory is proof
373 if [ -d /usr/apollo ]; then
374 echo "whatever-apollo-whatever"
379 ISNEXT=`hostinfo 2>/dev/null`
382 echo "whatever-next-nextstep3.3"; exit 0
385 echo "whatever-next-nextstep"; exit 0
389 # At this point we gone through all the one's
392 echo "${MACHINE}-whatever-${SYSTEM}"
396 # ---------------------------------------------------------------------------
397 # this is where the translation occurs into SSLeay terms
398 # ---------------------------------------------------------------------------
400 # figure out if gcc is available and if so we use it otherwise
401 # we fallback to whatever cc does on the system
402 GCCVER=`(gcc -dumpversion) 2>/dev/null`
403 if [ "$GCCVER" != "" ]; then
405 # then strip off whatever prefix egcs prepends the number with...
406 # Hopefully, this will work for any future prefixes as well.
407 GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
408 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
409 # does give us what we want though, so we use that. We just just the
410 # major and minor version numbers.
411 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
412 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
417 if [ "$SYSTEM" = "HP-UX" ];then
418 # By default gcc is a ILP32 compiler (with long long == 64).
420 if [ $GCCVER -ge 30 ]; then
421 # PA64 support only came in with gcc 3.0.x.
422 # We check if the preprocessor symbol __LP64__ is defined...
423 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
424 : # __LP64__ has slipped through, it therefore is not defined
430 if [ "$SYSTEM" = "SunOS" ]; then
431 if [ $GCCVER -ge 30 ]; then
432 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
433 # to be working, at the very least 'make test' passes...
434 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
440 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
441 CCVER=`(cc -V 2>&1) 2>/dev/null | \
442 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
443 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
445 if [ $CCVER -gt 40 ]; then
446 CC=cc # overrides gcc!!!
447 if [ $CCVER -eq 50 ]; then
448 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
449 echo " patch #107357-01 or later applied."
452 elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then
457 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
458 # check for Compaq C, expected output is "blah-blah C Vx.x"
459 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
460 egrep -e '.* C V[0-9]\.[0-9]' | \
461 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
463 if [ $CCCVER -gt 60 ]; then
464 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
465 # only on hash routines and des, otherwise gcc (2.95)
466 # keeps along rather tight...
470 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
471 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
476 # read the output of the embedded GuessOS
479 echo Operating system: $GUESSOS
481 # now map the output into SSLeay terms ... really should hack into the
482 # script above so we end up with values in vars but that would take
483 # more time that I want to waste at the moment
486 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
488 if [ $CPU -ge 4000 ]; then
489 options="$options -mips2"
494 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
496 #if [ $CPU -ge 5000 ]; then
497 # options="$options -mips4"
499 # options="$options -mips3"
504 echo "WARNING! If you wish to build 64-bit library, then you have to"
505 echo " invoke './Configure irix64-mips4-$CC' *manually*."
506 if [ "$TEST" = "false" -a -t 1 ]; then
507 echo " You have about 5 seconds to press Ctrl-C to abort."
508 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
510 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
512 #if [ $CPU -ge 5000 ]; then
513 # options="$options -mips4"
515 # options="$options -mips3"
520 ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo`
521 case ${ISA:-generic} in
522 *[67]) OUT="linux-alpha+bwx-$CC" ;;
523 *) OUT="linux-alpha-$CC" ;;
525 if [ "$CC" = "gcc" ]; then
526 case ${ISA:-generic} in
527 EV5|EV45) options="$options -mcpu=ev5";;
528 EV56|PCA56) options="$options -mcpu=ev56";;
529 EV6|EV67|PCA57) options="$options -mcpu=ev6";;
535 #include <stdio.h> /* for printf() prototype */
536 int main (argc, argv) int argc; char *argv[]; {
538 printf ("linux-%s\n", argv[1]);
541 printf ("linux-%sel\n", argv[1]);
546 ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
550 echo "WARNING! If you wish to build 64-bit library, then you have to"
551 echo " invoke './Configure linux-ppc64' *manually*."
552 if [ "$TEST" = "false" -a -t 1 ]; then
553 echo " You have about 5 seconds to press Ctrl-C to abort."
554 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
558 ppc-*-linux2) OUT="linux-ppc" ;;
559 m68k-*-linux*) OUT="linux-m68k" ;;
560 ia64-*-linux?) OUT="linux-ia64" ;;
561 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
562 ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
563 i386-apple-darwin*) OUT="darwin-i386-cc" ;;
565 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
566 echo " and wish to build 64-bit library, then you have to"
567 echo " invoke './Configure linux64-sparcv9' *manually*."
568 if [ "$TEST" = "false" -a -t 1 ]; then
569 echo " You have about 5 seconds to press Ctrl-C to abort."
570 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
572 OUT="linux-sparcv9" ;;
574 KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
575 case ${KARCH:-sun4} in
576 sun4u*) OUT="linux-sparcv9" ;;
577 sun4m) OUT="linux-sparcv8" ;;
578 sun4d) OUT="linux-sparcv8" ;;
579 *) OUT="linux-sparcv7" ;;
582 CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
583 CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo`
585 # ??TODO ?? Model transformations
586 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
587 # assuming no further arch. identification will ever be used by GCC.
588 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
589 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
590 # for these chips in the future.
591 # PA7300LC -> 7100LC (1.1)
592 # PA8200 -> 8000 (2.0)
593 # PA8500 -> 8000 (2.0)
594 # PA8600 -> 8000 (2.0)
596 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
597 # Finish Model transformations
599 options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
600 OUT="linux-parisc" ;;
601 arm*-*-linux2) OUT="linux-elf-arm" ;;
602 s390-*-linux2) OUT="linux-s390" ;;
603 s390x-*-linux?) OUT="linux-s390x" ;;
604 x86_64-*-linux?) OUT="linux-x86_64" ;;
605 *-*-linux2) OUT="linux-elf"
606 if [ "$GCCVER" -gt 28 ]; then
607 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
610 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
613 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
617 *-*-linux1) OUT="linux-aout" ;;
619 OUT="solaris-sparcv9-$CC"
620 ISA64=`(isalist) 2>/dev/null | grep sparcv9`
621 if [ "$ISA64" != "" ]; then
622 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
623 echo "WARNING! If you wish to build 64-bit library, then you have to"
624 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
625 if [ "$TEST" = "false" -a -t 1 ]; then
626 echo " You have about 5 seconds to press Ctrl-C to abort."
627 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
629 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
630 # $GCC_ARCH denotes default ABI chosen by compiler driver
631 # (first one found on the $PATH). I assume that user
632 # expects certain consistency with the rest of his builds
633 # and therefore switch over to 64-bit. <appro>
634 OUT="solaris64-sparcv9-gcc"
635 echo "WARNING! If you wish to build 32-bit library, then you have to"
636 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
637 if [ "$TEST" = "false" -a -t 1 ]; then
638 echo " You have about 5 seconds to press Ctrl-C to abort."
639 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
641 elif [ "$GCC_ARCH" = "-m32" ]; then
642 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
643 echo " and wish to build 64-bit library, then you have to"
644 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
645 if [ "$TEST" = "false" -a -t 1 ]; then
646 echo " You have about 5 seconds to press Ctrl-C to abort."
647 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
652 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
653 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
654 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
655 *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
656 *-*-sunos4) OUT="sunos-$CC" ;;
657 alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
658 sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;;
659 ia64-*-freebsd*) OUT="FreeBSD-ia64" ;;
660 *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
661 *-freebsd[1-2]*) OUT="FreeBSD" ;;
662 *86*-*-netbsd) OUT="NetBSD-x86" ;;
663 sun3*-*-netbsd) OUT="NetBSD-m68" ;;
664 *-*-netbsd) OUT="NetBSD-sparc" ;;
665 alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
666 *86*-*-openbsd) OUT="OpenBSD-i386" ;;
667 m68k*-*-openbsd) OUT="OpenBSD-m68k" ;;
668 m88k*-*-openbsd) OUT="OpenBSD-m88k" ;;
669 mips*-*-openbsd) OUT="OpenBSD-mips" ;;
670 pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
671 powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;;
672 sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;;
673 sparc*-*-openbsd) OUT="OpenBSD-sparc" ;;
674 vax*-*-openbsd) OUT="OpenBSD-vax" ;;
675 hppa*-*-openbsd) OUT="OpenBSD-hppa" ;;
676 *-*-openbsd) OUT="OpenBSD" ;;
677 *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
678 *-*-osf) OUT="alphaold-cc" ;;
679 *-*-tru64) OUT="alpha-cc" ;;
681 if [ "$CC" = "gcc" ]; then
687 *-*-unixware7) OUT="unixware-7" ;;
688 *-*-UnixWare7) OUT="unixware-7" ;;
689 *-*-Unixware7) OUT="unixware-7" ;;
690 *-*-unixware20*) OUT="unixware-2.0" ;;
691 *-*-unixware21*) OUT="unixware-2.1" ;;
692 *-*-UnixWare20*) OUT="unixware-2.0" ;;
693 *-*-UnixWare21*) OUT="unixware-2.1" ;;
694 *-*-Unixware20*) OUT="unixware-2.0" ;;
695 *-*-Unixware21*) OUT="unixware-2.1" ;;
697 options="$options no-threads no-shared no-asm no-dso"
700 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
701 RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
702 *-siemens-sysv4) OUT="SINIX" ;;
706 if [ $GCC_BITS = "64" ]; then
707 OUT="hpux64-parisc2-gcc"
709 OUT="hpux-parisc-gcc"
712 OUT="hpux-parisc-$CC"
714 KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
715 KERNEL_BITS=${KERNEL_BITS:-32}
716 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
717 CPU_VERSION=${CPU_VERSION:-0}
718 # See <sys/unistd.h> for further info on CPU_VERSION.
719 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
720 echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
721 echo " If you wish to build 32-bit library, the you have to"
722 echo " invoke './Configure hpux-ia64-cc' *manually*."
723 if [ "$TEST" = "false" -a -t 1 ]; then
724 echo " You have about 5 seconds to press Ctrl-C to abort."
725 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
728 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
729 if [ "$CC" = "cc" ]; then
730 OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc?
732 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
733 echo "WARNING! If you wish to build 64-bit library then you have to"
734 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
735 if [ "$TEST" = "false" -a -t 1 ]; then
736 echo " You have about 5 seconds to press Ctrl-C to abort."
737 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
740 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
742 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
744 else # Motorola(?) CPU
747 options="$options -D_REENTRANT" ;;
748 *-hpux) OUT="hpux-parisc-$CC" ;;
750 KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
751 KERNEL_BITS=${KERNEL_BITS:-32}
752 OBJECT_MODE=${OBJECT_MODE:-32}
753 if [ "$CC" = "gcc" ]; then
755 elif [ $OBJECT_MODE -eq 64 ]; then
756 echo 'Your $OBJECT_MODE was found to be set to 64'
760 if [ $KERNEL_BITS -eq 64 ]; then
761 echo "WARNING! If you wish to build 64-bit kit, then you have to"
762 echo " invoke './Configure aix64-cc' *manually*."
763 if [ "$TEST" = "false" -a -t 1 ]; then
764 echo " You have ~5 seconds to press Ctrl-C to abort."
765 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
770 # these are all covered by the catchall below
771 # *-dgux) OUT="dgux" ;;
772 mips-sony-newsos4) OUT="newsos4-gcc" ;;
773 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
774 *-*-cygwin) OUT="Cygwin" ;;
775 t3e-cray-unicosmk) OUT="cray-t3e" ;;
776 j90-cray-unicos) OUT="cray-j90" ;;
777 nsr-tandem-nsk) OUT="tandem-c89" ;;
778 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
781 # NB: This atalla support has been superceded by the ENGINE support
782 # That contains its own header and definitions anyway. Support can
783 # be enabled or disabled on any supported platform without external
784 # headers, eg. by adding the "hw-atalla" switch to ./config or
787 # See whether we can compile Atalla support
788 #if [ -f /usr/include/atasi.h ]
790 # options="$options -DATALLA"
793 # gcc < 2.8 does not support -mcpu=ultrasparc
794 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
796 echo "WARNING! Do consider upgrading to gcc-2.8 or later."
798 OUT=solaris-sparcv9-gcc27
800 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
802 echo "WARNING! Falling down to 'linux-sparcv8'."
803 echo " Upgrade to gcc-2.8 or later."
809 i386-*) options="$options 386" ;;
812 for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
814 if [ ! -d crypto/$i ]
816 options="$options no-$i"
820 # Discover Kerberos 5 (since it's still a prototype, we don't
821 # do any guesses yet, that's why this section is commented away.
822 #if [ -d /usr/kerberos ]; then
823 # krb5_dir=/usr/kerberos
824 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
825 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
826 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
827 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
828 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
829 # options="$options --with-krb5-flavor=MIT"
831 #elif [ -d /usr/heimdal ]; then
832 # krb5_dir=/usr/heimdal
833 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
834 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
835 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
836 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
837 # options="$options --with-krb5-flavor=Heimdal"
841 if [ -z "$OUT" ]; then
845 if [ ".$PERL" = . ] ; then
846 for i in . `echo $PATH | sed 's/:/ /g'`; do
847 if [ -f "$i/perl5$EXE" ] ; then
854 if [ ".$PERL" = . ] ; then
855 for i in . `echo $PATH | sed 's/:/ /g'`; do
856 if [ -f "$i/perl$EXE" ] ; then
857 if "$i/perl$EXE" -e 'exit($]<5.0)'; then
865 if [ ".$PERL" = . ] ; then
866 echo "You need Perl 5."
870 # run Configure to check to see if we need to specify the
871 # compiler for the platform ... in which case we add it on
872 # the end ... otherwise we leave it off
874 $PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
875 if [ $? = "0" ]; then
881 $PERL ./Configure LIST | grep "$OUT" > /dev/null
882 if [ $? = "0" ]; then
883 echo Configuring for $OUT
885 if [ "$TEST" = "true" ]; then
886 echo $PERL ./Configure $OUT $options
888 $PERL ./Configure $OUT $options
891 echo "This system ($OUT) is not supported. See file INSTALL for details."