3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
27 # pick up any command line args to config
31 -d*) PREFIX="debug-";;
33 -h*) TEST="true"; cat <<EOF
34 Usage: config [options]
35 -d Add a debug- prefix to machine choice.
36 -t Test mode, do not run the Configure perl script.
39 Any other text will be passed to the Configure perl script.
40 See INSTALL for instructions.
44 *) options=$options" $i" ;;
48 # First get uname entries that we use below
50 MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
51 RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
52 SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
53 VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
56 # Now test for ISC and SCO, since it is has a braindamaged uname.
58 # We need to work around FreeBSD 1.1.5.1
60 XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
61 if [ "x$XREL" != "x" ]; then
62 if [ -f /etc/kconfig ]; then
65 echo "${MACHINE}-whatever-isc4"; exit 0
71 echo "whatever-whatever-sco3"; exit 0
74 echo "whatever-whatever-sco5"; exit 0
77 if [ "x$VERSION" = "x2.01" ]; then
78 echo "${MACHINE}-whatever-unixware201"; exit 0
79 elif [ "x$VERSION" = "x2.02" ]; then
80 echo "${MACHINE}-whatever-unixware202"; exit 0
81 elif [ "x$VERSION" = "x2.03" ]; then
82 echo "${MACHINE}-whatever-unixware203"; exit 0
83 elif [ "x$VERSION" = "x2.1.1" ]; then
84 echo "${MACHINE}-whatever-unixware211"; exit 0
85 elif [ "x$VERSION" = "x2.1.2" ]; then
86 echo "${MACHINE}-whatever-unixware212"; exit 0
87 elif [ "x$VERSION" = "x2.1.3" ]; then
88 echo "${MACHINE}-whatever-unixware213"; exit 0
90 echo "${MACHINE}-whatever-unixware2"; exit 0
94 echo "whatever-whatever-unixware1"; exit 0
97 if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
98 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
102 if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
103 echo "${MACHINE}-sco-unixware7"; exit 0
109 # Now we simply scan though... In most cases, the SYSTEM info is enough
111 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
113 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
114 echo "parisc-hp-MPE/iX"; exit 0
117 echo "m68k-apple-aux3"; exit 0
121 echo "${MACHINE}-ibm-aix43"; exit 0
125 echo "${MACHINE}-ibm-aix43"; exit 0
129 echo "${MACHINE}-ibm-aix"; exit 0
133 echo "${MACHINE}-dg-dgux"; exit 0
137 echo "${MACHINE}-hi-hiux"; exit 0
141 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
143 1[0-9].*) # HPUX 10 and 11 targets are unified
144 echo "${MACHINE}-hp-hpux10"; exit 0
147 echo "${MACHINE}-hp-hpux"; exit 0
153 echo "mips2-sgi-irix"; exit 0
157 echo "mips3-sgi-irix"; exit 0
161 echo "mips4-sgi-irix64"; exit 0
165 echo "${MACHINE}-whatever-linux2"; exit 0
169 echo "${MACHINE}-whatever-linux1"; exit 0
173 echo "hurd-x86"; exit 0;
177 echo "${MACHINE}-lynx-lynxos"; exit 0
180 BSD/OS:4.*) # BSD/OS always says 386
181 echo "i486-whatever-bsdi4"; exit 0
184 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
185 case `/sbin/sysctl -n hw.model` in
187 echo "i586-whatever-bsdi"; exit 0
190 echo "i386-whatever-bsdi"; exit 0
196 echo "${MACHINE}-whatever-bsdi"; exit 0
200 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
201 MACH=`sysctl -n hw.model`
204 *386* ) MACH="i386" ;;
205 *486* ) MACH="i486" ;;
206 Pentium\ II*) MACH="i686" ;;
207 Pentium* ) MACH="i586" ;;
208 * ) MACH="$MACHINE" ;;
211 i[0-9]86 ) ARCH="pc" ;;
213 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
217 echo "${MACHINE}-whatever-freebsd"; exit 0
221 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
225 echo "${MACHINE}-whatever-netbsd"; exit 0
229 echo "${MACHINE}-whatever-openbsd"; exit 0
233 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
237 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
240 echo "${MACHINE}-dec-tru64"; exit 0
243 echo "${MACHINE}-dec-osf"; exit 0
246 echo "${MACHINE}-dec-osf"; exit 0
254 echo "${MACHINE}-whatever-qnx4"
257 echo "${MACHINE}-whatever-qnx6"
260 echo "${MACHINE}-whatever-qnx"
267 echo "i860-intel-osf1"; exit 0
271 echo "ppc-apple-rhapsody"; exit 0
277 echo "ppc-apple-darwin${VERSION}"
280 echo "i386-apple-darwin${VERSION}"
287 echo "${MACHINE}-whatever-solaris2"; exit 0
291 echo "${MACHINE}-sun-sunos4"; exit 0
295 echo "${MACHINE}-whatever-sysv4"; exit 0
299 echo "${MACHINE}-whatever-sysv4"; exit 0
303 echo "${MACHINE}-whatever-sysv4"; exit 0
306 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*)
307 echo "i486-ncr-sysv4"; exit 0
311 echo "${MACHINE}-unknown-ultrix"; exit 0
315 echo "${MACHINE}-siemens-sysv4"; exit 0
319 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
323 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
327 echo "${MACHINE}-ncr-sysv4"; exit 0
331 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
335 echo "mips-sony-newsos4"; exit 0;
341 echo "${MACHINE}-whatever-cygwin_pre1.3"
344 echo "${MACHINE}-whatever-cygwin"
351 echo "t3e-cray-unicosmk"; exit 0;
355 echo "j90-cray-unicos"; exit 0;
359 echo "nsr-tandem-nsk"; exit 0;
364 # Ugg. These are all we can determine by what we know about
365 # the output of uname. Be more creative:
368 # Do the Apollo stuff first. Here, we just simply assume
369 # that the existance of the /usr/apollo directory is proof
371 if [ -d /usr/apollo ]; then
372 echo "whatever-apollo-whatever"
377 ISNEXT=`hostinfo 2>/dev/null`
380 echo "whatever-next-nextstep3.3"; exit 0
383 echo "whatever-next-nextstep"; exit 0
387 # At this point we gone through all the one's
390 echo "${MACHINE}-whatever-${SYSTEM}"
394 # ---------------------------------------------------------------------------
395 # this is where the translation occurs into SSLeay terms
396 # ---------------------------------------------------------------------------
398 # figure out if gcc is available and if so we use it otherwise
399 # we fallback to whatever cc does on the system
400 GCCVER=`(gcc -dumpversion) 2>/dev/null`
401 if [ "$GCCVER" != "" ]; then
403 # then strip off whatever prefix egcs prepends the number with...
404 # Hopefully, this will work for any future prefixes as well.
405 GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
406 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
407 # does give us what we want though, so we use that. We just just the
408 # major and minor version numbers.
409 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
410 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
415 if [ "$SYSTEM" = "HP-UX" ];then
416 # By default gcc is a ILP32 compiler (with long long == 64).
418 if [ $GCCVER -ge 30 ]; then
419 # PA64 support only came in with gcc 3.0.x.
420 # We look for the preprocessor symbol __LP64__ indicating
421 # 64bit bit long and pointer. sizeof(int) == 32 on HPUX64.
422 if gcc -v -E -x c /dev/null 2>&1 | grep __LP64__ > /dev/null; then
427 if [ "$SYSTEM" = "SunOS" ]; then
428 if [ $GCCVER -ge 30 ]; then
429 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
430 # to be working, at the very least 'make test' passes...
431 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
437 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
438 CCVER=`(cc -V 2>&1) 2>/dev/null | \
439 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
440 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
442 if [ $CCVER -gt 40 ]; then
443 CC=cc # overrides gcc!!!
444 if [ $CCVER -eq 50 ]; then
445 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
446 echo " patch #107357-01 or later applied."
449 elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then
454 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
455 # check for Compaq C, expected output is "blah-blah C Vx.x"
456 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
457 egrep -e '.* C V[0-9]\.[0-9]' | \
458 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
460 if [ $CCCVER -gt 60 ]; then
461 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
462 # only on hash routines and des, otherwise gcc (2.95)
463 # keeps along rather tight...
469 # read the output of the embedded GuessOS
472 echo Operating system: $GUESSOS
474 # now map the output into SSLeay terms ... really should hack into the
475 # script above so we end up with values in vars but that would take
476 # more time that I want to waste at the moment
479 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
481 if [ $CPU -ge 4000 ]; then
482 options="$options -mips2"
487 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
489 if [ $CPU -ge 5000 ]; then
490 options="$options -mips4"
492 options="$options -mips3"
497 echo "WARNING! If you wish to build 64-bit library, then you have to"
498 echo " invoke './Configure irix64-mips4-$CC' *manually*."
499 if [ "$TEST" = "false" ]; then
500 echo " You have about 5 seconds to press Ctrl-C to abort."
501 (stty -icanon min 0 time 50; read waste) < /dev/tty
503 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
505 if [ $CPU -ge 5000 ]; then
506 options="$options -mips4"
508 options="$options -mips3"
513 ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo`
514 case ${ISA:-generic} in
515 *[67]) OUT="linux-alpha+bwx-$CC" ;;
516 *) OUT="linux-alpha-$CC" ;;
518 if [ "$CC" = "gcc" ]; then
519 case ${ISA:-generic} in
520 EV5|EV45) options="$options -mcpu=ev5";;
521 EV56|PCA56) options="$options -mcpu=ev56";;
522 EV6|EV67|PCA57) options="$options -mcpu=ev6";;
528 #include <stdio.h> /* for printf() prototype */
529 int main (argc, argv) int argc; char *argv[]; {
531 printf ("linux-%s\n", argv[1]);
534 printf ("linux-%sel\n", argv[1]);
539 ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
543 #Use the standard target for PPC architecture until we create a
544 #special one for the 64bit architecture.
546 ppc-*-linux2) OUT="linux-ppc" ;;
547 m68k-*-linux*) OUT="linux-m68k" ;;
548 ia64-*-linux?) OUT="linux-ia64" ;;
549 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
550 ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
551 i386-apple-darwin*) OUT="darwin-i386-cc" ;;
553 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
554 echo " and wish to build 64-bit library, then you have to"
555 echo " invoke './Configure linux64-sparcv9' *manually*."
556 if [ "$TEST" = "false" ]; then
557 echo " You have about 5 seconds to press Ctrl-C to abort."
558 (stty -icanon min 0 time 50; read waste) < /dev/tty
560 OUT="linux-sparcv9" ;;
562 KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
563 case ${KARCH:-sun4} in
564 sun4u*) OUT="linux-sparcv9" ;;
565 sun4m) OUT="linux-sparcv8" ;;
566 sun4d) OUT="linux-sparcv8" ;;
567 *) OUT="linux-sparcv7" ;;
570 CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
571 CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo`
573 # ??TODO ?? Model transformations
574 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
575 # assuming no further arch. identification will ever be used by GCC.
576 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
577 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
578 # for these chips in the future.
579 # PA7300LC -> 7100LC (1.1)
580 # PA8200 -> 8000 (2.0)
581 # PA8500 -> 8000 (2.0)
582 # PA8600 -> 8000 (2.0)
584 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
585 # Finish Model transformations
587 options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
588 OUT="linux-parisc" ;;
589 arm*-*-linux2) OUT="linux-elf-arm" ;;
590 s390-*-linux2) OUT="linux-s390" ;;
591 s390x-*-linux?) OUT="linux-s390x" ;;
592 x86_64-*-linux?) OUT="linux-x86_64" ;;
593 *-*-linux2) OUT="linux-elf"
594 if [ "$GCCVER" -gt 28 ]; then
595 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
598 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
601 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
605 *-*-linux1) OUT="linux-aout" ;;
607 OUT="solaris-sparcv9-$CC"
608 ISA64=`(isalist) 2>/dev/null | grep sparcv9`
609 if [ "$ISA64" != "" ]; then
610 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
611 echo "WARNING! If you wish to build 64-bit library, then you have to"
612 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
613 if [ "$TEST" = "false" ]; then
614 echo " You have about 5 seconds to press Ctrl-C to abort."
615 (stty -icanon min 0 time 50; read waste) < /dev/tty
617 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
618 # $GCC_ARCH denotes default ABI chosen by compiler driver
619 # (first one found on the $PATH). I assume that user
620 # expects certain consistency with the rest of his builds
621 # and therefore switch over to 64-bit. <appro>
622 OUT="solaris64-sparcv9-gcc"
623 echo "WARNING! If you wish to build 32-bit library, then you have to"
624 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
625 if [ "$TEST" = "false" ]; then
626 echo " You have about 5 seconds to press Ctrl-C to abort."
627 (stty -icanon min 0 time 50; read waste) < /dev/tty
629 elif [ "$GCC_ARCH" = "-m32" ]; then
630 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
631 echo " and wish to build 64-bit library, then you have to"
632 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
633 if [ "$TEST" = "false" ]; then
634 echo " You have about 5 seconds to press Ctrl-C to abort."
635 (stty -icanon min 0 time 50; read waste) < /dev/tty
640 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
641 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
642 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
643 *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
644 *-*-sunos4) OUT="sunos-$CC" ;;
645 alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
646 sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;;
647 *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
648 *-freebsd[1-2]*) OUT="FreeBSD" ;;
649 *86*-*-netbsd) OUT="NetBSD-x86" ;;
650 sun3*-*-netbsd) OUT="NetBSD-m68" ;;
651 *-*-netbsd) OUT="NetBSD-sparc" ;;
652 alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
653 *86*-*-openbsd) OUT="OpenBSD-i386" ;;
654 m68k*-*-openbsd) OUT="OpenBSD-m68k" ;;
655 m88k*-*-openbsd) OUT="OpenBSD-m88k" ;;
656 mips*-*-openbsd) OUT="OpenBSD-mips" ;;
657 pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
658 powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;;
659 sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;;
660 sparc*-*-openbsd) OUT="OpenBSD-sparc" ;;
661 vax*-*-openbsd) OUT="OpenBSD-vax" ;;
662 hppa*-*-openbsd) OUT="OpenBSD-hppa" ;;
663 *-*-openbsd) OUT="OpenBSD" ;;
664 *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
665 *-*-osf) OUT="alphaold-cc" ;;
666 *-*-tru64) OUT="alpha-cc" ;;
668 if [ "$CC" = "gcc" ]; then
674 *-*-unixware7) OUT="unixware-7" ;;
675 *-*-UnixWare7) OUT="unixware-7" ;;
676 *-*-Unixware7) OUT="unixware-7" ;;
677 *-*-unixware20*) OUT="unixware-2.0" ;;
678 *-*-unixware21*) OUT="unixware-2.1" ;;
679 *-*-UnixWare20*) OUT="unixware-2.0" ;;
680 *-*-UnixWare21*) OUT="unixware-2.1" ;;
681 *-*-Unixware20*) OUT="unixware-2.0" ;;
682 *-*-Unixware21*) OUT="unixware-2.1" ;;
683 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
684 RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
685 *-siemens-sysv4) OUT="SINIX" ;;
689 if [ $GCC_BITS = "64" ]; then
690 OUT="hpux64-parisc-gcc"
692 OUT="hpux-parisc-gcc"
695 OUT="hpux-parisc-$CC"
697 KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
698 KERNEL_BITS=${KERNEL_BITS:-32}
699 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
700 CPU_VERSION=${CPU_VERSION:-0}
701 # See <sys/unistd.h> for further info on CPU_VERSION.
702 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
703 echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
704 echo " If you wish to build 32-bit library, the you have to"
705 echo " invoke './Configure hpux-ia64-cc' *manually*."
706 if [ "$TEST" = "false" ]; then
707 echo " You have about 5 seconds to press Ctrl-C to abort."
708 (stty -icanon min 0 time 50; read waste) < /dev/tty
711 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
712 if [ "$CC" = "cc" ]; then
713 OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc?
715 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
716 echo "WARNING! If you wish to build 64-bit library then you have to"
717 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
718 if [ "$TEST" = "false" ]; then
719 echo " You have about 5 seconds to press Ctrl-C to abort."
720 (stty -icanon min 0 time 50; read waste) < /dev/tty
723 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
725 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
727 else # Motorola(?) CPU
730 options="$options -D_REENTRANT" ;;
731 *-hpux) OUT="hpux-parisc-$CC" ;;
732 # these are all covered by the catchall below
733 # *-aix) OUT="aix-$CC" ;;
734 # *-dgux) OUT="dgux" ;;
735 mips-sony-newsos4) OUT="newsos4-gcc" ;;
736 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
737 *-*-cygwin) OUT="Cygwin" ;;
738 t3e-cray-unicosmk) OUT="cray-t3e" ;;
739 j90-cray-unicos) OUT="cray-j90" ;;
740 nsr-tandem-nsk) OUT="tandem-c89" ;;
741 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
744 # NB: This atalla support has been superceded by the ENGINE support
745 # That contains its own header and definitions anyway. Support can
746 # be enabled or disabled on any supported platform without external
747 # headers, eg. by adding the "hw-atalla" switch to ./config or
750 # See whether we can compile Atalla support
751 #if [ -f /usr/include/atasi.h ]
753 # options="$options -DATALLA"
756 # gcc < 2.8 does not support -mcpu=ultrasparc
757 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
759 echo "WARNING! Do consider upgrading to gcc-2.8 or later."
761 OUT=solaris-sparcv9-gcc27
763 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
765 echo "WARNING! Falling down to 'linux-sparcv8'."
766 echo " Upgrade to gcc-2.8 or later."
772 i386-*) options="$options 386" ;;
775 for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
777 if [ ! -d crypto/$i ]
779 options="$options no-$i"
783 # Discover Kerberos 5 (since it's still a prototype, we don't
784 # do any guesses yet, that's why this section is commented away.
785 #if [ -d /usr/kerberos ]; then
786 # krb5_dir=/usr/kerberos
787 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
788 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
789 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
790 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
791 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
792 # options="$options --with-krb5-flavor=MIT"
794 #elif [ -d /usr/heimdal ]; then
795 # krb5_dir=/usr/heimdal
796 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
797 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
798 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
799 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
800 # options="$options --with-krb5-flavor=Heimdal"
804 if [ -z "$OUT" ]; then
808 if [ ".$PERL" = . ] ; then
809 for i in . `echo $PATH | sed 's/:/ /g'`; do
810 if [ -f "$i/perl5" ] ; then
817 if [ ".$PERL" = . ] ; then
818 for i in . `echo $PATH | sed 's/:/ /g'`; do
819 if [ -f "$i/perl" ] ; then
820 if "$i/perl" -e 'exit($]<5.0)'; then
828 if [ ".$PERL" = . ] ; then
829 echo "You need Perl 5."
833 # run Configure to check to see if we need to specify the
834 # compiler for the platform ... in which case we add it on
835 # the end ... otherwise we leave it off
837 $PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
838 if [ $? = "0" ]; then
844 $PERL ./Configure LIST | grep "$OUT" > /dev/null
845 if [ $? = "0" ]; then
846 echo Configuring for $OUT
848 if [ "$TEST" = "true" ]; then
849 echo $PERL ./Configure $OUT $options
851 $PERL ./Configure $OUT $options
854 echo "This system ($OUT) is not supported. See file INSTALL for details."