3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
28 # pick up any command line args to config
32 -d*) PREFIX="debug-";;
34 -h*) TEST="true"; cat <<EOF
35 Usage: config [options]
36 -d Add a debug- prefix to machine choice.
37 -t Test mode, do not run the Configure perl script.
40 Any other text will be passed to the Configure perl script.
41 See INSTALL for instructions.
45 *) options=$options" $i" ;;
49 # First get uname entries that we use below
51 [ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
52 [ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
53 [ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
54 [ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
57 # Now test for ISC and SCO, since it is has a braindamaged uname.
59 # We need to work around FreeBSD 1.1.5.1
61 XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
62 if [ "x$XREL" != "x" ]; then
63 if [ -f /etc/kconfig ]; then
66 echo "${MACHINE}-whatever-isc4"; exit 0
72 echo "whatever-whatever-sco3"; exit 0
75 echo "whatever-whatever-sco5"; exit 0
79 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
80 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
81 x2*) echo "whatever-whatever-unixware2"; exit 0 ;;
85 echo "whatever-whatever-unixware1"; exit 0
89 # We hardcode i586 in place of ${MACHINE} for the
90 # following reason. The catch is that even though Pentium
91 # is minimum requirement for platforms in question,
92 # ${MACHINE} gets always assigned to i386. Now, problem
93 # with i386 is that it makes ./config pass 386 to
94 # ./Configure, which in turn makes make generate
95 # inefficient SHA-1 (for this moment) code.
96 x[678]*) echo "i586-sco-unixware7"; exit 0 ;;
102 # Now we simply scan though... In most cases, the SYSTEM info is enough
104 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
106 echo "m68k-apple-aux3"; exit 0
110 echo "${MACHINE}-ibm-aix"; exit 0
114 echo "${MACHINE}-ibm-aix"; exit 0
118 echo "${MACHINE}-ibm-aix3"; exit 0
122 echo "${MACHINE}-hi-hiux"; exit 0
126 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
128 1[0-9].*) # HPUX 10 and 11 targets are unified
129 echo "${MACHINE}-hp-hpux1x"; exit 0
132 echo "${MACHINE}-hp-hpux"; exit 0
138 echo "mips2-sgi-irix"; exit 0
142 echo "mips3-sgi-irix"; exit 0
146 echo "mips4-sgi-irix64"; exit 0
150 echo "${MACHINE}-whatever-linux2"; exit 0
154 echo "${MACHINE}-whatever-linux1"; exit 0
158 echo "hurd-x86"; exit 0;
162 echo "${MACHINE}-lynx-lynxos"; exit 0
165 BSD/OS:4.*) # BSD/OS always says 386
166 echo "i486-whatever-bsdi4"; exit 0
169 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
170 case `/sbin/sysctl -n hw.model` in
172 echo "i586-whatever-bsdi"; exit 0
175 echo "i386-whatever-bsdi"; exit 0
181 echo "${MACHINE}-whatever-bsdi"; exit 0
185 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
186 MACH=`sysctl -n hw.model`
189 *386* ) MACH="i386" ;;
190 *486* ) MACH="i486" ;;
191 Pentium\ II*) MACH="i686" ;;
192 Pentium* ) MACH="i586" ;;
193 * ) MACH="$MACHINE" ;;
196 i[0-9]86 ) ARCH="pc" ;;
198 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
202 echo "${MACHINE}-whatever-freebsd"; exit 0
206 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
210 echo "${MACHINE}-whatever-netbsd"; exit 0
214 echo "${MACHINE}-whatever-openbsd"; exit 0
218 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
222 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
225 echo "${MACHINE}-dec-tru64"; exit 0
228 echo "${MACHINE}-dec-osf"; exit 0
231 echo "${MACHINE}-dec-osf"; exit 0
239 echo "${MACHINE}-whatever-qnx4"
242 echo "${MACHINE}-whatever-qnx6"
245 echo "${MACHINE}-whatever-qnx"
252 echo "i860-intel-osf1"; exit 0
256 echo "ppc-apple-rhapsody"; exit 0
262 echo "ppc-apple-darwin${VERSION}"
265 echo "i686-apple-darwin${VERSION}"
272 echo "${MACHINE}-whatever-solaris2"; exit 0
276 echo "${MACHINE}-sun-sunos4"; exit 0
280 echo "${MACHINE}-whatever-sysv4"; exit 0
284 echo "i386-stratus-vos"; exit 0
288 echo "hppa1.1-stratus-vos"; exit 0
292 echo "${MACHINE}-whatever-sysv4"; exit 0
296 echo "${MACHINE}-whatever-sysv4"; exit 0
299 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*)
300 echo "i486-ncr-sysv4"; exit 0
304 echo "${MACHINE}-unknown-ultrix"; exit 0
308 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
312 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
316 echo "${MACHINE}-ncr-sysv4"; exit 0
320 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
324 echo "${MACHINE}-whatever-mingw"; exit 0;
329 echo "${MACHINE}-whatever-cygwin_pre1.3"
332 echo "${MACHINE}-whatever-cygwin"
339 echo "t3e-cray-unicosmk"; exit 0;
343 echo "j90-cray-unicos"; exit 0;
347 echo "nsr-tandem-nsk"; exit 0;
351 echo "${MACHINE}-whatever-vxworks"; exit 0;
356 # Ugg. These are all we can determine by what we know about
357 # the output of uname. Be more creative:
360 # Do the Apollo stuff first. Here, we just simply assume
361 # that the existence of the /usr/apollo directory is proof
363 if [ -d /usr/apollo ]; then
364 echo "whatever-apollo-whatever"
369 ISNEXT=`hostinfo 2>/dev/null`
372 echo "whatever-next-nextstep3.3"; exit 0
375 echo "whatever-next-nextstep"; exit 0
379 # At this point we gone through all the one's
382 echo "${MACHINE}-whatever-${SYSTEM}"
386 # ---------------------------------------------------------------------------
387 # this is where the translation occurs into SSLeay terms
388 # ---------------------------------------------------------------------------
390 # Only set CC if not supplied already
391 if [ -z "$CROSS_COMPILE$CC" ]; then
392 GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null`
393 if [ "$GCCVER" != "" ]; then
394 # then strip off whatever prefix egcs prepends the number with...
395 # Hopefully, this will work for any future prefixes as well.
396 GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
397 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
398 # does give us what we want though, so we use that. We just just the
399 # major and minor version numbers.
400 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
401 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
408 if [ "$SYSTEM" = "HP-UX" ];then
409 # By default gcc is a ILP32 compiler (with long long == 64).
411 if [ $GCCVER -ge 30 ]; then
412 # PA64 support only came in with gcc 3.0.x.
413 # We check if the preprocessor symbol __LP64__ is defined...
414 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
415 : # __LP64__ has slipped through, it therefore is not defined
421 if [ "$SYSTEM" = "SunOS" ]; then
422 if [ $GCCVER -ge 30 ]; then
423 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
424 # to be working, at the very least 'make test' passes...
425 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
431 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
432 CCVER=`(cc -V 2>&1) 2>/dev/null | \
433 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
434 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
436 if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then
437 CC=cc # overrides gcc!!!
438 if [ $CCVER -eq 50 ]; then
439 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
440 echo " patch #107357-01 or later applied."
446 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
447 # check for Compaq C, expected output is "blah-blah C Vx.x"
448 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
449 egrep -e '.* C V[0-9]\.[0-9]' | \
450 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
452 if [ $CCCVER -gt 60 ]; then
453 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
454 # only on hash routines and des, otherwise gcc (2.95)
455 # keeps along rather tight...
459 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
460 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
465 # read the output of the embedded GuessOS
468 echo Operating system: $GUESSOS
470 # now map the output into SSLeay terms ... really should hack into the
471 # script above so we end up with values in vars but that would take
472 # more time that I want to waste at the moment
481 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
483 if [ $CPU -ge 4000 ]; then
484 options="$options -mips2"
489 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
491 #if [ $CPU -ge 5000 ]; then
492 # options="$options -mips4"
494 # options="$options -mips3"
499 echo "WARNING! If you wish to build 64-bit library, then you have to"
500 echo " invoke './Configure irix64-mips4-$CC' *manually*."
501 if [ "$TEST" = "false" -a -t 1 ]; then
502 echo " You have about 5 seconds to press Ctrl-C to abort."
503 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
505 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
507 #if [ $CPU -ge 5000 ]; then
508 # options="$options -mips4"
510 # options="$options -mips3"
514 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
516 ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
517 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
518 echo "WARNING! If you wish to build 64-bit library, then you have to"
519 echo " invoke './Configure darwin64-ppc-cc' *manually*."
520 if [ "$TEST" = "false" -a -t 1 ]; then
521 echo " You have about 5 seconds to press Ctrl-C to abort."
522 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
525 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
526 OUT="darwin64-ppc-cc"
531 ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
532 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
533 echo "WARNING! If you wish to build 64-bit library, then you have to"
534 echo " invoke './Configure darwin64-x86_64-cc' *manually*."
535 if [ "$TEST" = "false" -a -t 1 ]; then
536 echo " You have about 5 seconds to press Ctrl-C to abort."
537 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
540 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
541 OUT="darwin64-x86_64-cc"
546 options="$options -arch%20armv6 -arch%20armv7"
547 OUT="iphoneos-cross" ;;
549 options="$options -arch%20${MACHINE}"
550 OUT="iphoneos-cross" ;;
551 arm64-*-iphoneos|*-*-ios64)
554 ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
555 case ${ISA:-generic} in
556 *[678]) OUT="linux-alpha+bwx-$CC" ;;
557 *) OUT="linux-alpha-$CC" ;;
559 if [ "$CC" = "gcc" ]; then
560 case ${ISA:-generic} in
561 EV5|EV45) options="$options -mcpu=ev5";;
562 EV56|PCA56) options="$options -mcpu=ev56";;
563 *) options="$options -mcpu=ev6";;
568 if [ -z "$KERNEL_BITS" ]; then
569 echo "WARNING! If you wish to build 64-bit library, then you have to"
570 echo " invoke './Configure linux-ppc64' *manually*."
571 if [ "$TEST" = "false" -a -t 1 ]; then
572 echo " You have about 5 seconds to press Ctrl-C to abort."
573 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
576 if [ "$KERNEL_BITS" = "64" ]; then
580 (echo "__LP64__" | gcc -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null) || options="$options -m32"
583 ppc64le-*-linux2) OUT="linux-ppc64le" ;;
584 ppc-*-linux2) OUT="linux-ppc" ;;
586 echo "WARNING! If you wish to build 64-bit library, then you have to"
587 echo " invoke './Configure linux64-mips64' *manually*."
588 if [ "$TEST" = "false" -a -t 1 ]; then
589 echo " You have about 5 seconds to press Ctrl-C to abort."
590 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
594 mips*-*-linux2) OUT="linux-mips32" ;;
595 ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;;
596 ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;;
597 pentium-*-vxworks*) OUT="vxworks-pentium" ;;
598 simlinux-*-vxworks*) OUT="vxworks-simlinux" ;;
599 mips-*-vxworks*) OUT="vxworks-mips";;
600 ia64-*-linux?) OUT="linux-ia64" ;;
602 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
603 echo " and wish to build 64-bit library, then you have to"
604 echo " invoke './Configure linux64-sparcv9' *manually*."
605 if [ "$TEST" = "false" -a -t 1 ]; then
606 echo " You have about 5 seconds to press Ctrl-C to abort."
607 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
609 OUT="linux-sparcv9" ;;
611 KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo`
612 case ${KARCH:-sun4} in
613 sun4u*) OUT="linux-sparcv9" ;;
614 sun4m) OUT="linux-sparcv8" ;;
615 sun4d) OUT="linux-sparcv8" ;;
616 *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
619 # 64-bit builds under parisc64 linux are not supported and
620 # compiler is expected to generate 32-bit objects...
621 CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo`
622 CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo`
624 # ??TODO ?? Model transformations
625 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
626 # assuming no further arch. identification will ever be used by GCC.
627 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
628 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
629 # for these chips in the future.
630 # PA7300LC -> 7100LC (1.1)
631 # PA8200 -> 8000 (2.0)
632 # PA8500 -> 8000 (2.0)
633 # PA8600 -> 8000 (2.0)
635 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'`
636 # Finish Model transformations
638 options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
639 OUT="linux-generic32" ;;
640 armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
641 armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;;
642 arm*-*-linux2) OUT="linux-armv4" ;;
643 aarch64-*-linux2) OUT="linux-aarch64" ;;
644 sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
645 sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
646 m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
647 s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
649 # To be uncommented when glibc bug is fixed, see Configure...
650 #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
651 # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
652 # echo " have to invoke './Configure linux32-s390x' *manually*."
653 # if [ "$TEST" = "false" -a -t -1 ]; then
654 # echo " You have about 5 seconds to press Ctrl-C to abort."
655 # (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
660 x86_64-*-linux?) OUT="linux-x86_64" ;;
661 *86-*-linux2) OUT="linux-elf"
662 if [ "$GCCVER" -gt 28 ]; then
663 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
664 options="$options -march=pentium"
666 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
667 options="$options -march=pentiumpro"
669 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
670 options="$options -march=k6"
673 *-*-linux1) OUT="linux-aout" ;;
674 *-*-linux2) OUT="linux-generic32" ;;
675 sun4[uv]*-*-solaris2)
676 OUT="solaris-sparcv9-$CC"
677 ISA64=`(isalist) 2>/dev/null | grep sparcv9`
678 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then
679 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
680 echo "WARNING! If you wish to build 64-bit library, then you have to"
681 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
682 if [ "$TEST" = "false" -a -t 1 ]; then
683 echo " You have about 5 seconds to press Ctrl-C to abort."
684 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
686 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
687 # $GCC_ARCH denotes default ABI chosen by compiler driver
688 # (first one found on the $PATH). I assume that user
689 # expects certain consistency with the rest of his builds
690 # and therefore switch over to 64-bit. <appro>
691 OUT="solaris64-sparcv9-gcc"
692 echo "WARNING! If you wish to build 32-bit library, then you have to"
693 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
694 if [ "$TEST" = "false" -a -t 1 ]; then
695 echo " You have about 5 seconds to press Ctrl-C to abort."
696 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
698 elif [ "$GCC_ARCH" = "-m32" ]; then
699 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
700 echo " and wish to build 64-bit library, then you have to"
701 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
702 if [ "$TEST" = "false" -a -t 1 ]; then
703 echo " You have about 5 seconds to press Ctrl-C to abort."
704 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
708 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then
709 OUT="solaris64-sparcv9-$CC"
712 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
713 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
714 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
716 ISA64=`(isalist) 2>/dev/null | grep amd64`
717 if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then
718 OUT="solaris64-x86_64-$CC"
720 OUT="solaris-x86-$CC"
721 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then
722 options="$options no-sse2"
726 *-*-sunos4) OUT="sunos-$CC" ;;
728 *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
729 alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
730 powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
731 sparc64-*-*bsd*) OUT="BSD-sparc64" ;;
732 ia64-*-*bsd*) OUT="BSD-ia64" ;;
733 amd64-*-*bsd*) OUT="BSD-x86_64" ;;
734 *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc...
735 if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD
736 libc=/usr/lib/libc.so
738 # ld searches for highest libc.so.* and so do we
739 libc=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null`
741 case "`(file -L $libc) 2>/dev/null`" in
742 *ELF*) OUT="BSD-x86-elf" ;;
743 *) OUT="BSD-x86"; options="$options no-sse2" ;;
745 *-*-*bsd*) OUT="BSD-generic32" ;;
747 *-*-osf) OUT="osf1-alpha-cc" ;;
748 *-*-tru64) OUT="tru64-alpha-cc" ;;
750 if [ "$CC" = "gcc" ]; then
751 OUT="unixware-7-gcc" ; options="$options no-sse2"
753 OUT="unixware-7" ; options="$options no-sse2 -D__i386__"
756 *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;;
757 *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;;
759 options="$options no-threads no-shared no-asm no-dso"
762 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
764 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
765 OUT="hpux64-parisc2-gcc"
767 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
768 KERNEL_BITS=${KERNEL_BITS:-32}
769 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
770 CPU_VERSION=${CPU_VERSION:-0}
771 # See <sys/unistd.h> for further info on CPU_VERSION.
772 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
773 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
778 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
779 OUT=${OUT:-"hpux-parisc2-${CC}"}
780 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
781 echo "WARNING! If you wish to build 64-bit library then you have to"
782 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
783 if [ "$TEST" = "false" -a -t 1 ]; then
784 echo " You have about 5 seconds to press Ctrl-C to abort."
785 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
788 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
789 OUT="hpux-parisc-${CC}"
790 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
791 OUT="hpux-parisc-${CC}"
792 else # Motorola(?) CPU
795 options="$options -D_REENTRANT" ;;
796 *-hpux) OUT="hpux-parisc-$CC" ;;
798 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
799 KERNEL_BITS=${KERNEL_BITS:-32}
800 OBJECT_MODE=${OBJECT_MODE:-32}
801 if [ "$CC" = "gcc" ]; then
803 if [ $OBJECT_MODE -eq 64 ]; then
804 echo 'Your $OBJECT_MODE was found to be set to 64'
807 elif [ $OBJECT_MODE -eq 64 ]; then
808 echo 'Your $OBJECT_MODE was found to be set to 64'
812 if [ $KERNEL_BITS -eq 64 ]; then
813 echo "WARNING! If you wish to build 64-bit kit, then you have to"
814 echo " invoke './Configure aix64-cc' *manually*."
815 if [ "$TEST" = "false" -a -t 1 ]; then
816 echo " You have ~5 seconds to press Ctrl-C to abort."
817 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
821 if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then
822 : # this applies even to Power3 and later, as they return PowerPC_POWER[345]
824 options="$options no-asm"
827 # these are all covered by the catchall below
828 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
829 *-*-cygwin) OUT="Cygwin" ;;
830 t3e-cray-unicosmk) OUT="cray-t3e" ;;
831 j90-cray-unicos) OUT="cray-j90" ;;
832 nsr-tandem-nsk) OUT="tandem-c89" ;;
833 x86pc-*-qnx6) OUT="QNX6-i386" ;;
834 *-*-qnx6) OUT="QNX6" ;;
835 x86-*-android|i?86-*-android) OUT="android-x86" ;;
836 armv[7-9]*-*-android) OUT="android-armv7" ;;
837 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
840 # NB: This atalla support has been superseded by the ENGINE support
841 # That contains its own header and definitions anyway. Support can
842 # be enabled or disabled on any supported platform without external
843 # headers, eg. by adding the "hw-atalla" switch to ./config or
846 # See whether we can compile Atalla support
847 #if [ -f /usr/include/atasi.h ]
849 # options="$options -DATALLA"
852 if [ -n "$CONFIG_OPTIONS" ]; then
853 options="$options $CONFIG_OPTIONS"
856 if expr "$options" : '.*no\-asm' > /dev/null; then :; else
857 sh -c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \
858 grep \\--noexecstack >/dev/null && \
859 options="$options -Wa,--noexecstack"
862 # gcc < 2.8 does not support -march=ultrasparc
863 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
865 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
866 echo " Upgrade to gcc-2.8 or later."
868 OUT=solaris-sparcv8-gcc
870 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
872 echo "WARNING! Falling down to 'linux-sparcv8'."
873 echo " Upgrade to gcc-2.8 or later."
879 i386-*) options="$options 386" ;;
882 for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
884 if [ ! -d crypto/$i ]
886 options="$options no-$i"
890 # Discover Kerberos 5 (since it's still a prototype, we don't
891 # do any guesses yet, that's why this section is commented away.
892 #if [ -d /usr/kerberos ]; then
893 # krb5_dir=/usr/kerberos
894 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
895 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
896 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
897 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
898 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
899 # options="$options --with-krb5-flavor=MIT"
901 #elif [ -d /usr/heimdal ]; then
902 # krb5_dir=/usr/heimdal
903 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
904 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
905 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
906 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
907 # options="$options --with-krb5-flavor=Heimdal"
911 if [ -z "$OUT" ]; then
915 if [ ".$PERL" = . ] ; then
916 for i in . `echo $PATH | sed 's/:/ /g'`; do
917 if [ -f "$i/perl5$EXE" ] ; then
924 if [ ".$PERL" = . ] ; then
925 for i in . `echo $PATH | sed 's/:/ /g'`; do
926 if [ -f "$i/perl$EXE" ] ; then
927 if "$i/perl$EXE" -e 'exit($]<5.0)'; then
935 if [ ".$PERL" = . ] ; then
936 echo "You need Perl 5."
940 # run Configure to check to see if we need to specify the
941 # compiler for the platform ... in which case we add it on
942 # the end ... otherwise we leave it off
944 $PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
945 if [ $? = "0" ]; then
951 $PERL ./Configure LIST | grep "$OUT" > /dev/null
952 if [ $? = "0" ]; then
953 echo Configuring for $OUT
955 if [ "$TEST" = "true" ]; then
956 echo $PERL ./Configure $OUT $options
958 $PERL ./Configure $OUT $options
961 echo "This system ($OUT) is not supported. See file INSTALL for details."