3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
28 # pick up any command line args to config
32 -d*) PREFIX="debug-";;
34 -h*) TEST="true"; cat <<EOF
35 Usage: config [options]
36 -d Add a debug- prefix to machine choice.
37 -t Test mode, do not run the Configure perl script.
40 Any other text will be passed to the Configure perl script.
41 See INSTALL for instructions.
45 *) options=$options" $i" ;;
49 # First get uname entries that we use below
51 MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
52 RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
53 SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
54 VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
57 # Now test for ISC and SCO, since it is has a braindamaged uname.
59 # We need to work around FreeBSD 1.1.5.1
61 XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
62 if [ "x$XREL" != "x" ]; then
63 if [ -f /etc/kconfig ]; then
66 echo "${MACHINE}-whatever-isc4"; exit 0
72 echo "whatever-whatever-sco3"; exit 0
75 echo "whatever-whatever-sco5"; exit 0
79 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
80 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
81 x2*) echo "whatever-whatever-unixware2"; exit 0 ;;
85 echo "whatever-whatever-unixware1"; exit 0
89 # We hardcode i586 in place of ${MACHINE} for the
90 # following reason. The catch is that even though Pentium
91 # is minimum requirement for platforms in question,
92 # ${MACHINE} gets always assigned to i386. Now, problem
93 # with i386 is that it makes ./config pass 386 to
94 # ./Configure, which in turn makes make generate
95 # inefficient SHA-1 (for this moment) code.
96 x[678]*) echo "i586-sco-unixware7"; exit 0 ;;
102 # Now we simply scan though... In most cases, the SYSTEM info is enough
104 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
106 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
107 echo "parisc-hp-MPE/iX"; exit 0
110 echo "m68k-apple-aux3"; exit 0
114 echo "${MACHINE}-ibm-aix"; exit 0
118 echo "${MACHINE}-ibm-aix"; exit 0
122 echo "${MACHINE}-ibm-aix3"; exit 0
126 if [ -e /boot/develop/headers/be/bone ]; then
127 echo "beos-x86-bone"; exit 0
129 echo "beos-x86-r5"; exit 0
134 echo "${MACHINE}-dg-dgux"; exit 0
138 echo "${MACHINE}-hi-hiux"; exit 0
142 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
144 1[0-9].*) # HPUX 10 and 11 targets are unified
145 echo "${MACHINE}-hp-hpux1x"; exit 0
148 echo "${MACHINE}-hp-hpux"; exit 0
154 echo "mips2-sgi-irix"; exit 0
158 echo "mips3-sgi-irix"; exit 0
162 echo "mips4-sgi-irix64"; exit 0
166 echo "${MACHINE}-whatever-linux2"; exit 0
170 echo "${MACHINE}-whatever-linux1"; exit 0
174 echo "hurd-x86"; exit 0;
178 echo "${MACHINE}-lynx-lynxos"; exit 0
181 BSD/OS:4.*) # BSD/OS always says 386
182 echo "i486-whatever-bsdi4"; exit 0
185 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
186 case `/sbin/sysctl -n hw.model` in
188 echo "i586-whatever-bsdi"; exit 0
191 echo "i386-whatever-bsdi"; exit 0
197 echo "${MACHINE}-whatever-bsdi"; exit 0
201 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
202 MACH=`sysctl -n hw.model`
205 *386* ) MACH="i386" ;;
206 *486* ) MACH="i486" ;;
207 Pentium\ II*) MACH="i686" ;;
208 Pentium* ) MACH="i586" ;;
209 * ) MACH="$MACHINE" ;;
212 i[0-9]86 ) ARCH="pc" ;;
214 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
218 echo "${MACHINE}-whatever-freebsd"; exit 0
222 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
226 echo "${MACHINE}-whatever-netbsd"; exit 0
230 echo "${MACHINE}-whatever-openbsd"; exit 0
234 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
238 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
241 echo "${MACHINE}-dec-tru64"; exit 0
244 echo "${MACHINE}-dec-osf"; exit 0
247 echo "${MACHINE}-dec-osf"; exit 0
255 echo "${MACHINE}-whatever-qnx4"
258 echo "${MACHINE}-whatever-qnx6"
261 echo "${MACHINE}-whatever-qnx"
268 echo "i860-intel-osf1"; exit 0
272 echo "ppc-apple-rhapsody"; exit 0
278 echo "ppc-apple-darwin${VERSION}"
281 echo "i386-apple-darwin${VERSION}"
288 echo "${MACHINE}-whatever-solaris2"; exit 0
292 echo "${MACHINE}-sun-sunos4"; exit 0
296 echo "${MACHINE}-whatever-sysv4"; exit 0
300 echo "i386-stratus-vos"; exit 0
304 echo "hppa1.1-stratus-vos"; exit 0
308 echo "${MACHINE}-whatever-sysv4"; exit 0
312 echo "${MACHINE}-whatever-sysv4"; exit 0
315 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*)
316 echo "i486-ncr-sysv4"; exit 0
320 echo "${MACHINE}-unknown-ultrix"; exit 0
324 echo "${MACHINE}-siemens-sysv4"; exit 0
328 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
332 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
336 echo "${MACHINE}-ncr-sysv4"; exit 0
340 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
344 echo "mips-sony-newsos4"; exit 0;
348 echo "${MACHINE}-whatever-mingw"; exit 0;
353 echo "${MACHINE}-whatever-cygwin_pre1.3"
356 echo "${MACHINE}-whatever-cygwin"
363 echo "t3e-cray-unicosmk"; exit 0;
367 echo "j90-cray-unicos"; exit 0;
371 echo "nsr-tandem-nsk"; exit 0;
376 # Ugg. These are all we can determine by what we know about
377 # the output of uname. Be more creative:
380 # Do the Apollo stuff first. Here, we just simply assume
381 # that the existance of the /usr/apollo directory is proof
383 if [ -d /usr/apollo ]; then
384 echo "whatever-apollo-whatever"
389 ISNEXT=`hostinfo 2>/dev/null`
392 echo "whatever-next-nextstep3.3"; exit 0
395 echo "whatever-next-nextstep"; exit 0
399 # At this point we gone through all the one's
402 echo "${MACHINE}-whatever-${SYSTEM}"
406 # ---------------------------------------------------------------------------
407 # this is where the translation occurs into SSLeay terms
408 # ---------------------------------------------------------------------------
410 # figure out if gcc is available and if so we use it otherwise
411 # we fallback to whatever cc does on the system
412 GCCVER=`(gcc -dumpversion) 2>/dev/null`
413 if [ "$GCCVER" != "" ]; then
415 # then strip off whatever prefix egcs prepends the number with...
416 # Hopefully, this will work for any future prefixes as well.
417 GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
418 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
419 # does give us what we want though, so we use that. We just just the
420 # major and minor version numbers.
421 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
422 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
427 if [ "$SYSTEM" = "HP-UX" ];then
428 # By default gcc is a ILP32 compiler (with long long == 64).
430 if [ $GCCVER -ge 30 ]; then
431 # PA64 support only came in with gcc 3.0.x.
432 # We check if the preprocessor symbol __LP64__ is defined...
433 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
434 : # __LP64__ has slipped through, it therefore is not defined
440 if [ "$SYSTEM" = "SunOS" ]; then
441 if [ $GCCVER -ge 30 ]; then
442 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
443 # to be working, at the very least 'make test' passes...
444 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
450 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
451 CCVER=`(cc -V 2>&1) 2>/dev/null | \
452 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
453 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
455 if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then
456 CC=cc # overrides gcc!!!
457 if [ $CCVER -eq 50 ]; then
458 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
459 echo " patch #107357-01 or later applied."
465 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
466 # check for Compaq C, expected output is "blah-blah C Vx.x"
467 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
468 egrep -e '.* C V[0-9]\.[0-9]' | \
469 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
471 if [ $CCCVER -gt 60 ]; then
472 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
473 # only on hash routines and des, otherwise gcc (2.95)
474 # keeps along rather tight...
478 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
479 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
484 # read the output of the embedded GuessOS
487 echo Operating system: $GUESSOS
489 # now map the output into SSLeay terms ... really should hack into the
490 # script above so we end up with values in vars but that would take
491 # more time that I want to waste at the moment
494 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
496 if [ $CPU -ge 4000 ]; then
497 options="$options -mips2"
502 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
504 #if [ $CPU -ge 5000 ]; then
505 # options="$options -mips4"
507 # options="$options -mips3"
512 echo "WARNING! If you wish to build 64-bit library, then you have to"
513 echo " invoke './Configure irix64-mips4-$CC' *manually*."
514 if [ "$TEST" = "false" -a -t 1 ]; then
515 echo " You have about 5 seconds to press Ctrl-C to abort."
516 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
518 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
520 #if [ $CPU -ge 5000 ]; then
521 # options="$options -mips4"
523 # options="$options -mips3"
527 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
529 ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
530 if [ "$ISA64" = "1" ]; then
531 echo "WARNING! If you wish to build 64-bit library, then you have to"
532 echo " invoke './Configure darwin64-ppc-cc' *manually*."
533 if [ "$TEST" = "false" -a -t 1 ]; then
534 echo " You have about 5 seconds to press Ctrl-C to abort."
535 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
538 OUT="darwin-ppc-cc" ;;
539 i386-apple-darwin*) OUT="darwin-i386-cc" ;;
541 ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
542 case ${ISA:-generic} in
543 *[678]) OUT="linux-alpha+bwx-$CC" ;;
544 *) OUT="linux-alpha-$CC" ;;
546 if [ "$CC" = "gcc" ]; then
547 case ${ISA:-generic} in
548 EV5|EV45) options="$options -mcpu=ev5";;
549 EV56|PCA56) options="$options -mcpu=ev56";;
550 *) options="$options -mcpu=ev6";;
555 echo "WARNING! If you wish to build 64-bit library, then you have to"
556 echo " invoke './Configure linux-ppc64' *manually*."
557 if [ "$TEST" = "false" -a -t 1 ]; then
558 echo " You have about 5 seconds to press Ctrl-C to abort."
559 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
563 ppc-*-linux2) OUT="linux-ppc" ;;
564 ia64-*-linux?) OUT="linux-ia64" ;;
566 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
567 echo " and wish to build 64-bit library, then you have to"
568 echo " invoke './Configure linux64-sparcv9' *manually*."
569 if [ "$TEST" = "false" -a -t 1 ]; then
570 echo " You have about 5 seconds to press Ctrl-C to abort."
571 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
573 OUT="linux-sparcv9" ;;
575 KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo`
576 case ${KARCH:-sun4} in
577 sun4u*) OUT="linux-sparcv9" ;;
578 sun4m) OUT="linux-sparcv8" ;;
579 sun4d) OUT="linux-sparcv8" ;;
580 *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
583 # 64-bit builds under parisc64 linux are not supported and
584 # compiler is expected to generate 32-bit objects...
585 CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo`
586 CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo`
588 # ??TODO ?? Model transformations
589 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
590 # assuming no further arch. identification will ever be used by GCC.
591 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
592 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
593 # for these chips in the future.
594 # PA7300LC -> 7100LC (1.1)
595 # PA8200 -> 8000 (2.0)
596 # PA8500 -> 8000 (2.0)
597 # PA8600 -> 8000 (2.0)
599 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'`
600 # Finish Model transformations
602 options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
603 OUT="linux-generic32" ;;
604 arm*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
605 arm*l-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
606 sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
607 sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
608 m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
609 s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
610 s390x-*-linux2) OUT="linux-s390x" ;;
611 x86_64-*-linux?) OUT="linux-x86_64" ;;
612 *86-*-linux2) OUT="linux-elf"
613 if [ "$GCCVER" -gt 28 ]; then
614 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
615 options="$options -march=pentium"
617 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
618 options="$options -march=pentiumpro"
620 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
621 options="$options -march=k6"
624 *-*-linux1) OUT="linux-aout" ;;
625 *-*-linux2) OUT="linux-generic32" ;;
626 sun4[uv]*-*-solaris2)
627 OUT="solaris-sparcv9-$CC"
628 ISA64=`(isalist) 2>/dev/null | grep sparcv9`
629 if [ "$ISA64" != "" ]; then
630 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
631 echo "WARNING! If you wish to build 64-bit library, then you have to"
632 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
633 if [ "$TEST" = "false" -a -t 1 ]; then
634 echo " You have about 5 seconds to press Ctrl-C to abort."
635 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
637 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
638 # $GCC_ARCH denotes default ABI chosen by compiler driver
639 # (first one found on the $PATH). I assume that user
640 # expects certain consistency with the rest of his builds
641 # and therefore switch over to 64-bit. <appro>
642 OUT="solaris64-sparcv9-gcc"
643 echo "WARNING! If you wish to build 32-bit library, then you have to"
644 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
645 if [ "$TEST" = "false" -a -t 1 ]; then
646 echo " You have about 5 seconds to press Ctrl-C to abort."
647 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
649 elif [ "$GCC_ARCH" = "-m32" ]; then
650 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
651 echo " and wish to build 64-bit library, then you have to"
652 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
653 if [ "$TEST" = "false" -a -t 1 ]; then
654 echo " You have about 5 seconds to press Ctrl-C to abort."
655 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
660 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
661 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
662 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
664 ISA64=`(isalist) 2>/dev/null | grep amd64`
665 if [ "$ISA64" != "" ]; then
666 OUT="solaris64-x86_64-$CC"
668 OUT="solaris-x86-$CC"
669 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then
670 options="$options no-sse2"
674 *-*-sunos4) OUT="sunos-$CC" ;;
676 *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
677 alpha*-*-*bsd*) OUT="BSD-generic64; options="$options -DL_ENDIAN" ;;
678 powerpc64-*-*bsd*) OUT="BSD-generic64; options="$options -DB_ENDIAN" ;;
679 sparc64-*-*bsd*) OUT="BSD-sparc64" ;;
680 ia64-*-*bsd*) OUT="BSD-ia64" ;;
681 amd64-*-*bsd*) OUT="BSD-x86_64" ;;
682 *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc...
683 if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD
684 libc=/usr/lib/libc.so
686 # ld searches for highest libc.so.* and so do we
687 libc=`(ls /usr/lib/libc.so.* | tail -1) 2>/dev/null`
689 case "`(file -L $libc) 2>/dev/null`" in
690 *ELF*) OUT="BSD-x86-elf" ;;
691 *) OUT="BSD-x86"; options="$options no-sse2" ;;
693 *-*-*bsd*) OUT="BSD-generic32" ;;
695 *-*-osf) OUT="osf1-alpha-cc" ;;
696 *-*-tru64) OUT="tru64-alpha-cc" ;;
698 if [ "$CC" = "gcc" ]; then
699 OUT="unixware-7-gcc" ; options="$options no-sse2"
701 OUT="unixware-7" ; options="$options no-sse2 -D__i386__"
704 *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;;
705 *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;;
707 options="$options no-threads no-shared no-asm no-dso"
710 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
711 RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
712 *-siemens-sysv4) OUT="SINIX" ;;
714 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
715 OUT="hpux64-parisc2-gcc"
717 KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
718 KERNEL_BITS=${KERNEL_BITS:-32}
719 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
720 CPU_VERSION=${CPU_VERSION:-0}
721 # See <sys/unistd.h> for further info on CPU_VERSION.
722 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
723 echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
724 echo " If you wish to build 32-bit library, the you have to"
725 echo " invoke './Configure hpux-ia64-cc' *manually*."
726 if [ "$TEST" = "false" -a -t 1 ]; then
727 echo " You have about 5 seconds to press Ctrl-C to abort."
728 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
731 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
732 OUT=${OUT:-"hpux-parisc2-${CC}"}
733 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
734 echo "WARNING! If you wish to build 64-bit library then you have to"
735 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
736 if [ "$TEST" = "false" -a -t 1 ]; then
737 echo " You have about 5 seconds to press Ctrl-C to abort."
738 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
741 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
742 OUT="hpux-parisc-${CC}"
743 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
744 OUT="hpux-parisc-${CC}"
745 else # Motorola(?) CPU
748 options="$options -D_REENTRANT" ;;
749 *-hpux) OUT="hpux-parisc-$CC" ;;
751 KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
752 KERNEL_BITS=${KERNEL_BITS:-32}
753 OBJECT_MODE=${OBJECT_MODE:-32}
754 if [ "$CC" = "gcc" ]; then
756 elif [ $OBJECT_MODE -eq 64 ]; then
757 echo 'Your $OBJECT_MODE was found to be set to 64'
761 if [ $KERNEL_BITS -eq 64 ]; then
762 echo "WARNING! If you wish to build 64-bit kit, then you have to"
763 echo " invoke './Configure aix64-cc' *manually*."
764 if [ "$TEST" = "false" -a -t 1 ]; then
765 echo " You have ~5 seconds to press Ctrl-C to abort."
766 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
770 if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then
771 : # this applies even to Power3 and later, as they return PowerPC_POWER[345]
773 options="$options no-asm"
776 # these are all covered by the catchall below
777 # *-dgux) OUT="dgux" ;;
778 mips-sony-newsos4) OUT="newsos4-gcc" ;;
779 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
780 *-*-cygwin) OUT="Cygwin" ;;
781 t3e-cray-unicosmk) OUT="cray-t3e" ;;
782 j90-cray-unicos) OUT="cray-j90" ;;
783 nsr-tandem-nsk) OUT="tandem-c89" ;;
784 beos-*) OUT="$GUESSOS" ;;
785 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
788 # NB: This atalla support has been superceded by the ENGINE support
789 # That contains its own header and definitions anyway. Support can
790 # be enabled or disabled on any supported platform without external
791 # headers, eg. by adding the "hw-atalla" switch to ./config or
794 # See whether we can compile Atalla support
795 #if [ -f /usr/include/atasi.h ]
797 # options="$options -DATALLA"
800 # gcc < 2.8 does not support -march=ultrasparc
801 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
803 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
804 echo " Upgrade to gcc-2.8 or later."
806 OUT=solaris-sparcv8-gcc
808 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
810 echo "WARNING! Falling down to 'linux-sparcv8'."
811 echo " Upgrade to gcc-2.8 or later."
817 i386-*) options="$options 386" ;;
820 for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
822 if [ ! -d crypto/$i ]
824 options="$options no-$i"
828 # Discover Kerberos 5 (since it's still a prototype, we don't
829 # do any guesses yet, that's why this section is commented away.
830 #if [ -d /usr/kerberos ]; then
831 # krb5_dir=/usr/kerberos
832 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
833 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
834 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
835 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
836 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
837 # options="$options --with-krb5-flavor=MIT"
839 #elif [ -d /usr/heimdal ]; then
840 # krb5_dir=/usr/heimdal
841 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
842 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
843 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
844 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
845 # options="$options --with-krb5-flavor=Heimdal"
849 if [ -z "$OUT" ]; then
853 if [ ".$PERL" = . ] ; then
854 for i in . `echo $PATH | sed 's/:/ /g'`; do
855 if [ -f "$i/perl5$EXE" ] ; then
862 if [ ".$PERL" = . ] ; then
863 for i in . `echo $PATH | sed 's/:/ /g'`; do
864 if [ -f "$i/perl$EXE" ] ; then
865 if "$i/perl$EXE" -e 'exit($]<5.0)'; then
873 if [ ".$PERL" = . ] ; then
874 echo "You need Perl 5."
878 # run Configure to check to see if we need to specify the
879 # compiler for the platform ... in which case we add it on
880 # the end ... otherwise we leave it off
882 $PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
883 if [ $? = "0" ]; then
889 $PERL ./Configure LIST | grep "$OUT" > /dev/null
890 if [ $? = "0" ]; then
891 echo Configuring for $OUT
893 if [ "$TEST" = "true" ]; then
894 echo $PERL ./Configure $OUT $options
896 $PERL ./Configure $OUT $options
899 echo "This system ($OUT) is not supported. See file INSTALL for details."