3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
28 # pick up any command line args to config
32 -d*) PREFIX="debug-";;
34 -h*) TEST="true"; cat <<EOF
35 Usage: config [options]
36 -d Add a debug- prefix to machine choice.
37 -t Test mode, do not run the Configure perl script.
40 Any other text will be passed to the Configure perl script.
41 See INSTALL for instructions.
45 *) options=$options" $i" ;;
49 # First get uname entries that we use below
51 MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
52 RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
53 SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
54 VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
57 # Now test for ISC and SCO, since it is has a braindamaged uname.
59 # We need to work around FreeBSD 1.1.5.1
61 XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
62 if [ "x$XREL" != "x" ]; then
63 if [ -f /etc/kconfig ]; then
66 echo "${MACHINE}-whatever-isc4"; exit 0
72 echo "whatever-whatever-sco3"; exit 0
75 echo "whatever-whatever-sco5"; exit 0
79 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
80 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
81 x2*) echo "whatever-whatever-unixware2"; exit 0 ;;
85 echo "whatever-whatever-unixware1"; exit 0
89 # We hardcode i586 in place of ${MACHINE} for the
90 # following reason. The catch is that even though Pentium
91 # is minimum requirement for platforms in question,
92 # ${MACHINE} gets always assigned to i386. Now, problem
93 # with i386 is that it makes ./config pass 386 to
94 # ./Configure, which in turn makes make generate
95 # inefficient SHA-1 (for this moment) code.
96 x7*) echo "i586-sco-unixware7"; exit 0 ;;
97 x8*) echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;;
103 # Now we simply scan though... In most cases, the SYSTEM info is enough
105 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
107 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
108 echo "parisc-hp-MPE/iX"; exit 0
111 echo "m68k-apple-aux3"; exit 0
115 echo "${MACHINE}-ibm-aix5"; exit 0
119 echo "${MACHINE}-ibm-aix"; exit 0
123 echo "${MACHINE}-dg-dgux"; exit 0
127 echo "${MACHINE}-hi-hiux"; exit 0
131 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
133 1[0-9].*) # HPUX 10 and 11 targets are unified
134 echo "${MACHINE}-hp-hpux1x"; exit 0
137 echo "${MACHINE}-hp-hpux"; exit 0
143 echo "mips2-sgi-irix"; exit 0
147 echo "mips3-sgi-irix"; exit 0
151 echo "mips4-sgi-irix64"; exit 0
155 echo "${MACHINE}-whatever-linux2"; exit 0
159 echo "${MACHINE}-whatever-linux1"; exit 0
163 echo "hurd-x86"; exit 0;
167 echo "${MACHINE}-lynx-lynxos"; exit 0
170 BSD/OS:4.*) # BSD/OS always says 386
171 echo "i486-whatever-bsdi4"; exit 0
174 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
175 case `/sbin/sysctl -n hw.model` in
177 echo "i586-whatever-bsdi"; exit 0
180 echo "i386-whatever-bsdi"; exit 0
186 echo "${MACHINE}-whatever-bsdi"; exit 0
190 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
191 MACH=`sysctl -n hw.model`
194 *386* ) MACH="i386" ;;
195 *486* ) MACH="i486" ;;
196 Pentium\ II*) MACH="i686" ;;
197 Pentium* ) MACH="i586" ;;
198 * ) MACH="$MACHINE" ;;
201 i[0-9]86 ) ARCH="pc" ;;
203 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
207 echo "${MACHINE}-whatever-freebsd"; exit 0
211 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
215 echo "${MACHINE}-whatever-netbsd"; exit 0
219 echo "${MACHINE}-whatever-openbsd"; exit 0
223 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
227 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
230 echo "${MACHINE}-dec-tru64"; exit 0
233 echo "${MACHINE}-dec-osf"; exit 0
236 echo "${MACHINE}-dec-osf"; exit 0
244 echo "${MACHINE}-whatever-qnx4"
247 echo "${MACHINE}-whatever-qnx6"
250 echo "${MACHINE}-whatever-qnx"
257 echo "i860-intel-osf1"; exit 0
261 echo "ppc-apple-rhapsody"; exit 0
267 echo "ppc-apple-darwin${VERSION}"
270 echo "i386-apple-darwin${VERSION}"
277 echo "${MACHINE}-whatever-solaris2"; exit 0
281 echo "${MACHINE}-sun-sunos4"; exit 0
285 echo "${MACHINE}-whatever-sysv4"; exit 0
289 echo "i386-stratus-vos"; exit 0
293 echo "hppa1.1-stratus-vos"; exit 0
297 echo "${MACHINE}-whatever-sysv4"; exit 0
301 echo "${MACHINE}-whatever-sysv4"; exit 0
304 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*)
305 echo "i486-ncr-sysv4"; exit 0
309 echo "${MACHINE}-unknown-ultrix"; exit 0
313 echo "${MACHINE}-siemens-sysv4"; exit 0
317 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
321 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
325 echo "${MACHINE}-ncr-sysv4"; exit 0
329 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
333 echo "mips-sony-newsos4"; exit 0;
339 echo "${MACHINE}-whatever-cygwin_pre1.3"
342 echo "${MACHINE}-whatever-cygwin"
349 echo "t3e-cray-unicosmk"; exit 0;
353 echo "j90-cray-unicos"; exit 0;
357 echo "nsr-tandem-nsk"; exit 0;
362 # Ugg. These are all we can determine by what we know about
363 # the output of uname. Be more creative:
366 # Do the Apollo stuff first. Here, we just simply assume
367 # that the existance of the /usr/apollo directory is proof
369 if [ -d /usr/apollo ]; then
370 echo "whatever-apollo-whatever"
375 ISNEXT=`hostinfo 2>/dev/null`
378 echo "whatever-next-nextstep3.3"; exit 0
381 echo "whatever-next-nextstep"; exit 0
385 # At this point we gone through all the one's
388 echo "${MACHINE}-whatever-${SYSTEM}"
392 # ---------------------------------------------------------------------------
393 # this is where the translation occurs into SSLeay terms
394 # ---------------------------------------------------------------------------
396 # figure out if gcc is available and if so we use it otherwise
397 # we fallback to whatever cc does on the system
398 GCCVER=`(gcc -dumpversion) 2>/dev/null`
399 if [ "$GCCVER" != "" ]; then
401 # then strip off whatever prefix egcs prepends the number with...
402 # Hopefully, this will work for any future prefixes as well.
403 GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'`
404 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
405 # does give us what we want though, so we use that. We just just the
406 # major and minor version numbers.
407 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
408 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
413 if [ "$SYSTEM" = "HP-UX" ];then
414 # By default gcc is a ILP32 compiler (with long long == 64).
416 if [ $GCCVER -ge 30 ]; then
417 # PA64 support only came in with gcc 3.0.x.
418 # We check if the preprocessor symbol __LP64__ is defined...
419 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
420 : # __LP64__ has slipped through, it therefore is not defined
426 if [ "$SYSTEM" = "SunOS" ]; then
427 if [ $GCCVER -ge 30 ]; then
428 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
429 # to be working, at the very least 'make test' passes...
430 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
436 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
437 CCVER=`(cc -V 2>&1) 2>/dev/null | \
438 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
439 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
441 if [ $CCVER -gt 40 ]; then
442 CC=cc # overrides gcc!!!
443 if [ $CCVER -eq 50 ]; then
444 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
445 echo " patch #107357-01 or later applied."
448 elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then
453 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
454 # check for Compaq C, expected output is "blah-blah C Vx.x"
455 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
456 egrep -e '.* C V[0-9]\.[0-9]' | \
457 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
459 if [ $CCCVER -gt 60 ]; then
460 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
461 # only on hash routines and des, otherwise gcc (2.95)
462 # keeps along rather tight...
466 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
467 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
472 # read the output of the embedded GuessOS
475 echo Operating system: $GUESSOS
477 # now map the output into SSLeay terms ... really should hack into the
478 # script above so we end up with values in vars but that would take
479 # more time that I want to waste at the moment
482 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
484 if [ $CPU -ge 4000 ]; then
485 options="$options -mips2"
490 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
492 if [ $CPU -ge 5000 ]; then
493 options="$options -mips4"
495 options="$options -mips3"
500 echo "WARNING! If you wish to build 64-bit library, then you have to"
501 echo " invoke './Configure irix64-mips4-$CC' *manually*."
502 if [ "$TEST" = "false" ]; then
503 echo " You have about 5 seconds to press Ctrl-C to abort."
504 (stty -icanon min 0 time 50; read waste) < /dev/tty
506 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
508 if [ $CPU -ge 5000 ]; then
509 options="$options -mips4"
511 options="$options -mips3"
516 ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo`
517 case ${ISA:-generic} in
518 *[67]) OUT="linux-alpha+bwx-$CC" ;;
519 *) OUT="linux-alpha-$CC" ;;
521 if [ "$CC" = "gcc" ]; then
522 case ${ISA:-generic} in
523 EV5|EV45) options="$options -mcpu=ev5";;
524 EV56|PCA56) options="$options -mcpu=ev56";;
525 EV6|EV67|PCA57) options="$options -mcpu=ev6";;
531 #include <stdio.h> /* for printf() prototype */
532 int main (argc, argv) int argc; char *argv[]; {
534 printf ("linux-%s\n", argv[1]);
537 printf ("linux-%sel\n", argv[1]);
542 ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
545 ppc64-*-linux2) OUT="linux-ppc64" ;;
546 ppc-*-linux2) OUT="linux-ppc" ;;
547 m68k-*-linux*) OUT="linux-m68k" ;;
548 ia64-*-linux?) OUT="linux-ia64" ;;
549 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
550 ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
551 i386-apple-darwin*) OUT="darwin-i386-cc" ;;
553 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
554 echo " and wish to build 64-bit library, then you have to"
555 echo " invoke './Configure linux64-sparcv9' *manually*."
556 if [ "$TEST" = "false" ]; then
557 echo " You have about 5 seconds to press Ctrl-C to abort."
558 (stty -icanon min 0 time 50; read waste) < /dev/tty
560 OUT="linux-sparcv9" ;;
562 KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
563 case ${KARCH:-sun4} in
564 sun4u*) OUT="linux-sparcv9" ;;
565 sun4m) OUT="linux-sparcv8" ;;
566 sun4d) OUT="linux-sparcv8" ;;
567 *) OUT="linux-sparcv7" ;;
570 CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
571 CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo`
573 # ??TODO ?? Model transformations
574 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
575 # assuming no further arch. identification will ever be used by GCC.
576 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
577 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
578 # for these chips in the future.
579 # PA7300LC -> 7100LC (1.1)
580 # PA8200 -> 8000 (2.0)
581 # PA8500 -> 8000 (2.0)
582 # PA8600 -> 8000 (2.0)
584 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
585 # Finish Model transformations
587 options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
588 OUT="linux-parisc" ;;
589 arm*-*-linux2) OUT="linux-elf-arm" ;;
590 s390-*-linux2) OUT="linux-s390" ;;
591 s390x-*-linux?) OUT="linux-s390x" ;;
592 x86_64-*-linux?) OUT="linux-x86_64" ;;
593 *-*-linux2) OUT="linux-elf"
594 if [ "$GCCVER" -gt 28 ]; then
595 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
598 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
601 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
605 *-*-linux1) OUT="linux-aout" ;;
607 OUT="solaris-sparcv9-$CC"
608 ISA64=`(isalist) 2>/dev/null | grep sparcv9`
609 if [ "$ISA64" != "" ]; then
610 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
611 echo "WARNING! If you wish to build 64-bit library, then you have to"
612 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
613 if [ "$TEST" = "false" ]; then
614 echo " You have about 5 seconds to press Ctrl-C to abort."
615 (stty -icanon min 0 time 50; read waste) < /dev/tty
617 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
618 # $GCC_ARCH denotes default ABI chosen by compiler driver
619 # (first one found on the $PATH). I assume that user
620 # expects certain consistency with the rest of his builds
621 # and therefore switch over to 64-bit. <appro>
622 OUT="solaris64-sparcv9-gcc"
623 echo "WARNING! If you wish to build 32-bit library, then you have to"
624 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
625 if [ "$TEST" = "false" ]; then
626 echo " You have about 5 seconds to press Ctrl-C to abort."
627 (stty -icanon min 0 time 50; read waste) < /dev/tty
629 elif [ "$GCC_ARCH" = "-m32" ]; then
630 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
631 echo " and wish to build 64-bit library, then you have to"
632 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
633 if [ "$TEST" = "false" ]; then
634 echo " You have about 5 seconds to press Ctrl-C to abort."
635 (stty -icanon min 0 time 50; read waste) < /dev/tty
640 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
641 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
642 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
643 *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
644 *-*-sunos4) OUT="sunos-$CC" ;;
645 alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
646 sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;;
647 ia64-*-freebsd*) OUT="FreeBSD-ia64" ;;
648 *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
649 *-freebsd[1-2]*) OUT="FreeBSD" ;;
650 *86*-*-netbsd) OUT="NetBSD-x86" ;;
651 sun3*-*-netbsd) OUT="NetBSD-m68" ;;
652 *-*-netbsd) OUT="NetBSD-sparc" ;;
653 alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
654 *86*-*-openbsd) OUT="OpenBSD-i386" ;;
655 m68k*-*-openbsd) OUT="OpenBSD-m68k" ;;
656 m88k*-*-openbsd) OUT="OpenBSD-m88k" ;;
657 mips*-*-openbsd) OUT="OpenBSD-mips" ;;
658 pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
659 powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;;
660 sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;;
661 sparc*-*-openbsd) OUT="OpenBSD-sparc" ;;
662 vax*-*-openbsd) OUT="OpenBSD-vax" ;;
663 hppa*-*-openbsd) OUT="OpenBSD-hppa" ;;
664 *-*-openbsd) OUT="OpenBSD" ;;
665 *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
666 *-*-osf) OUT="osf1-alpha-cc" ;;
667 *-*-tru64) OUT="tru64-alpha-cc" ;;
669 if [ "$CC" = "gcc" ]; then
675 *-*-unixware7) OUT="unixware-7" ;;
676 *-*-UnixWare7) OUT="unixware-7" ;;
677 *-*-Unixware7) OUT="unixware-7" ;;
678 *-*-unixware20*) OUT="unixware-2.0" ;;
679 *-*-unixware21*) OUT="unixware-2.1" ;;
680 *-*-UnixWare20*) OUT="unixware-2.0" ;;
681 *-*-UnixWare21*) OUT="unixware-2.1" ;;
682 *-*-Unixware20*) OUT="unixware-2.0" ;;
683 *-*-Unixware21*) OUT="unixware-2.1" ;;
685 options="$options no-threads no-shared no-asm no-dso"
688 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
689 RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
690 *-siemens-sysv4) OUT="SINIX" ;;
692 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
693 OUT="hpux64-parisc2-gcc"
695 KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
696 KERNEL_BITS=${KERNEL_BITS:-32}
697 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
698 CPU_VERSION=${CPU_VERSION:-0}
699 # See <sys/unistd.h> for further info on CPU_VERSION.
700 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
701 echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
702 echo " If you wish to build 32-bit library, the you have to"
703 echo " invoke './Configure hpux-ia64-cc' *manually*."
704 if [ "$TEST" = "false" ]; then
705 echo " You have about 5 seconds to press Ctrl-C to abort."
706 (stty -icanon min 0 time 50; read waste) < /dev/tty
709 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
710 OUT=${OUT:-"hpux-parisc2-${CC}"}
711 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
712 echo "WARNING! If you wish to build 64-bit library then you have to"
713 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
714 if [ "$TEST" = "false" ]; then
715 echo " You have about 5 seconds to press Ctrl-C to abort."
716 (stty -icanon min 0 time 50; read waste) < /dev/tty
719 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
720 OUT="hpux-parisc-${CC}
721 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
722 OUT="hpux-parisc-${CC}
723 else # Motorola(?) CPU
726 options="$options -D_REENTRANT" ;;
727 *-hpux) OUT="hpux-parisc-$CC" ;;
729 KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
730 KERNEL_BITS=${KERNEL_BITS:-32}
731 if [ $KERNEL_BITS -eq 64 ]; then
732 # we default to 64-bit because PKI performance is >3x better...
733 OBJECT_MODE=${OBJECT_MODE:-$KERNEL_BITS}
738 if [ "$CC" = "cc" -a $OBJECT_MODE -eq 64 ]; then
740 echo "WARNING! If you wish to build 32-bit kit, then you have to"
741 echo " invoke './Configure aix-cc' *manually*."
742 if [ "$TEST" = "false" ]; then
743 echo " You have ~5 seconds to press Ctrl-C to abort."
744 (stty -icanon min 0 time 50; read waste) < /dev/tty
746 elif [ "$CC" = "gcc" ]; then
751 if [ "$CC" = "gcc" ]; then
757 # these are all covered by the catchall below
758 # *-aix) OUT="aix-$CC" ;;
759 # *-dgux) OUT="dgux" ;;
760 mips-sony-newsos4) OUT="newsos4-gcc" ;;
761 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
762 *-*-cygwin) OUT="Cygwin" ;;
763 t3e-cray-unicosmk) OUT="cray-t3e" ;;
764 j90-cray-unicos) OUT="cray-j90" ;;
765 nsr-tandem-nsk) OUT="tandem-c89" ;;
766 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
769 # NB: This atalla support has been superceded by the ENGINE support
770 # That contains its own header and definitions anyway. Support can
771 # be enabled or disabled on any supported platform without external
772 # headers, eg. by adding the "hw-atalla" switch to ./config or
775 # See whether we can compile Atalla support
776 #if [ -f /usr/include/atasi.h ]
778 # options="$options -DATALLA"
781 # gcc < 2.8 does not support -mcpu=ultrasparc
782 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
784 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
785 echo " Upgrade to gcc-2.8 or later."
787 OUT=solaris-sparcv8-gcc
789 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
791 echo "WARNING! Falling down to 'linux-sparcv8'."
792 echo " Upgrade to gcc-2.8 or later."
798 i386-*) options="$options 386" ;;
801 for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha
803 if [ ! -d crypto/$i ]
805 options="$options no-$i"
809 # Discover Kerberos 5 (since it's still a prototype, we don't
810 # do any guesses yet, that's why this section is commented away.
811 #if [ -d /usr/kerberos ]; then
812 # krb5_dir=/usr/kerberos
813 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
814 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
815 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
816 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
817 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
818 # options="$options --with-krb5-flavor=MIT"
820 #elif [ -d /usr/heimdal ]; then
821 # krb5_dir=/usr/heimdal
822 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
823 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
824 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
825 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
826 # options="$options --with-krb5-flavor=Heimdal"
830 if [ -z "$OUT" ]; then
834 if [ ".$PERL" = . ] ; then
835 for i in . `echo $PATH | sed 's/:/ /g'`; do
836 if [ -f "$i/perl5$EXE" ] ; then
843 if [ ".$PERL" = . ] ; then
844 for i in . `echo $PATH | sed 's/:/ /g'`; do
845 if [ -f "$i/perl$EXE" ] ; then
846 if "$i/perl$EXE" -e 'exit($]<5.0)'; then
854 if [ ".$PERL" = . ] ; then
855 echo "You need Perl 5."
859 # run Configure to check to see if we need to specify the
860 # compiler for the platform ... in which case we add it on
861 # the end ... otherwise we leave it off
863 $PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
864 if [ $? = "0" ]; then
870 $PERL ./Configure LIST | grep "$OUT" > /dev/null
871 if [ $? = "0" ]; then
872 echo Configuring for $OUT
874 if [ "$TEST" = "true" ]; then
875 echo $PERL ./Configure $OUT $options
877 $PERL ./Configure $OUT $options
880 echo "This system ($OUT) is not supported. See file INSTALL for details."