3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
28 # pick up any command line args to config
32 -d*) PREFIX="debug-";;
34 -h*) TEST="true"; cat <<EOF
35 Usage: config [options]
36 -d Add a debug- prefix to machine choice.
37 -t Test mode, do not run the Configure perl script.
40 Any other text will be passed to the Configure perl script.
41 See INSTALL for instructions.
45 *) options=$options" $i" ;;
49 # First get uname entries that we use below
51 [ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
52 [ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
53 [ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
54 [ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
57 # Now test for ISC and SCO, since it is has a braindamaged uname.
59 # We need to work around FreeBSD 1.1.5.1
61 XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
62 if [ "x$XREL" != "x" ]; then
63 if [ -f /etc/kconfig ]; then
66 echo "${MACHINE}-whatever-isc4"; exit 0
72 echo "whatever-whatever-sco3"; exit 0
75 echo "whatever-whatever-sco5"; exit 0
79 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
80 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
81 x2*) echo "whatever-whatever-unixware2"; exit 0 ;;
85 echo "whatever-whatever-unixware1"; exit 0
89 # We hardcode i586 in place of ${MACHINE} for the
90 # following reason. The catch is that even though Pentium
91 # is minimum requirement for platforms in question,
92 # ${MACHINE} gets always assigned to i386. Now, problem
93 # with i386 is that it makes ./config pass 386 to
94 # ./Configure, which in turn makes make generate
95 # inefficient SHA-1 (for this moment) code.
96 x[678]*) echo "i586-sco-unixware7"; exit 0 ;;
102 # Now we simply scan though... In most cases, the SYSTEM info is enough
104 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
106 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
107 echo "parisc-hp-MPE/iX"; exit 0
110 echo "m68k-apple-aux3"; exit 0
114 echo "${MACHINE}-ibm-aix"; exit 0
118 echo "${MACHINE}-ibm-aix"; exit 0
122 echo "${MACHINE}-ibm-aix3"; exit 0
126 if [ -e /boot/develop/headers/be/bone ]; then
127 echo "beos-x86-bone"; exit 0
129 echo "beos-x86-r5"; exit 0
134 echo "${MACHINE}-dg-dgux"; exit 0
138 echo "${MACHINE}-hi-hiux"; exit 0
142 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
144 1[0-9].*) # HPUX 10 and 11 targets are unified
145 echo "${MACHINE}-hp-hpux1x"; exit 0
148 echo "${MACHINE}-hp-hpux"; exit 0
154 echo "mips2-sgi-irix"; exit 0
158 echo "mips3-sgi-irix"; exit 0
162 echo "mips4-sgi-irix64"; exit 0
166 echo "${MACHINE}-whatever-linux2"; exit 0
170 echo "${MACHINE}-whatever-linux1"; exit 0
174 echo "hurd-x86"; exit 0;
178 echo "${MACHINE}-lynx-lynxos"; exit 0
181 BSD/OS:4.*) # BSD/OS always says 386
182 echo "i486-whatever-bsdi4"; exit 0
185 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
186 case `/sbin/sysctl -n hw.model` in
188 echo "i586-whatever-bsdi"; exit 0
191 echo "i386-whatever-bsdi"; exit 0
197 echo "${MACHINE}-whatever-bsdi"; exit 0
201 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
202 MACH=`sysctl -n hw.model`
205 *386* ) MACH="i386" ;;
206 *486* ) MACH="i486" ;;
207 Pentium\ II*) MACH="i686" ;;
208 Pentium* ) MACH="i586" ;;
209 * ) MACH="$MACHINE" ;;
212 i[0-9]86 ) ARCH="pc" ;;
214 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
218 echo "${MACHINE}-whatever-freebsd"; exit 0
222 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
226 echo "${MACHINE}-whatever-netbsd"; exit 0
230 echo "${MACHINE}-whatever-openbsd"; exit 0
234 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
238 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
241 echo "${MACHINE}-dec-tru64"; exit 0
244 echo "${MACHINE}-dec-osf"; exit 0
247 echo "${MACHINE}-dec-osf"; exit 0
255 echo "${MACHINE}-whatever-qnx4"
258 echo "${MACHINE}-whatever-qnx6"
261 echo "${MACHINE}-whatever-qnx"
268 echo "i860-intel-osf1"; exit 0
272 echo "ppc-apple-rhapsody"; exit 0
278 echo "ppc-apple-darwin${VERSION}"
281 echo "i686-apple-darwin${VERSION}"
288 echo "${MACHINE}-whatever-solaris2"; exit 0
292 echo "${MACHINE}-sun-sunos4"; exit 0
296 echo "${MACHINE}-whatever-sysv4"; exit 0
300 echo "i386-stratus-vos"; exit 0
304 echo "hppa1.1-stratus-vos"; exit 0
308 echo "${MACHINE}-whatever-sysv4"; exit 0
312 echo "${MACHINE}-whatever-sysv4"; exit 0
315 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*)
316 echo "i486-ncr-sysv4"; exit 0
320 echo "${MACHINE}-unknown-ultrix"; exit 0
324 echo "${MACHINE}-siemens-sysv4"; exit 0
328 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
332 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
336 echo "${MACHINE}-ncr-sysv4"; exit 0
340 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
344 echo "mips-sony-newsos4"; exit 0;
348 echo "${MACHINE}-whatever-mingw"; exit 0;
353 echo "${MACHINE}-whatever-cygwin_pre1.3"
356 echo "${MACHINE}-whatever-cygwin"
363 echo "t3e-cray-unicosmk"; exit 0;
367 echo "j90-cray-unicos"; exit 0;
371 echo "nsr-tandem-nsk"; exit 0;
375 echo "${MACHINE}-whatever-vxworks"; exit 0;
380 # Ugg. These are all we can determine by what we know about
381 # the output of uname. Be more creative:
384 # Do the Apollo stuff first. Here, we just simply assume
385 # that the existance of the /usr/apollo directory is proof
387 if [ -d /usr/apollo ]; then
388 echo "whatever-apollo-whatever"
393 ISNEXT=`hostinfo 2>/dev/null`
396 echo "whatever-next-nextstep3.3"; exit 0
399 echo "whatever-next-nextstep"; exit 0
403 # At this point we gone through all the one's
406 echo "${MACHINE}-whatever-${SYSTEM}"
410 # ---------------------------------------------------------------------------
411 # this is where the translation occurs into SSLeay terms
412 # ---------------------------------------------------------------------------
414 if [ -z "$GCCVER" ]; then
415 GCCVER=`(gcc -dumpversion) 2>/dev/null`
417 if [ "$GCCVER" != "" ]; then
418 # then strip off whatever prefix egcs prepends the number with...
419 # Hopefully, this will work for any future prefixes as well.
420 GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
421 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
422 # does give us what we want though, so we use that. We just just the
423 # major and minor version numbers.
424 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
425 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
428 # Only set CC if not supplied already
429 if [ -z "$CC" ]; then
430 # figure out if gcc is available and if so we use it otherwise
431 # we fallback to whatever cc does on the system
432 if [ "$GCCVER" != "" ]; then
439 if [ "$SYSTEM" = "HP-UX" ];then
440 # By default gcc is a ILP32 compiler (with long long == 64).
442 if [ $GCCVER -ge 30 ]; then
443 # PA64 support only came in with gcc 3.0.x.
444 # We check if the preprocessor symbol __LP64__ is defined...
445 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
446 : # __LP64__ has slipped through, it therefore is not defined
452 if [ "$SYSTEM" = "SunOS" ]; then
453 if [ $GCCVER -ge 30 ]; then
454 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
455 # to be working, at the very least 'make test' passes...
456 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
462 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
463 CCVER=`(cc -V 2>&1) 2>/dev/null | \
464 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
465 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
467 if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then
468 CC=cc # overrides gcc!!!
469 if [ $CCVER -eq 50 ]; then
470 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
471 echo " patch #107357-01 or later applied."
477 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
478 # check for Compaq C, expected output is "blah-blah C Vx.x"
479 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
480 egrep -e '.* C V[0-9]\.[0-9]' | \
481 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
483 if [ $CCCVER -gt 60 ]; then
484 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
485 # only on hash routines and des, otherwise gcc (2.95)
486 # keeps along rather tight...
490 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
491 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
496 # read the output of the embedded GuessOS
499 echo Operating system: $GUESSOS
501 # now map the output into SSLeay terms ... really should hack into the
502 # script above so we end up with values in vars but that would take
503 # more time that I want to waste at the moment
512 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
514 if [ $CPU -ge 4000 ]; then
515 options="$options -mips2"
520 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
522 #if [ $CPU -ge 5000 ]; then
523 # options="$options -mips4"
525 # options="$options -mips3"
530 echo "WARNING! If you wish to build 64-bit library, then you have to"
531 echo " invoke './Configure irix64-mips4-$CC' *manually*."
532 if [ "$TEST" = "false" -a -t 1 ]; then
533 echo " You have about 5 seconds to press Ctrl-C to abort."
534 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
536 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
538 #if [ $CPU -ge 5000 ]; then
539 # options="$options -mips4"
541 # options="$options -mips3"
545 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
547 ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
548 if [ "$ISA64" = "1" ]; then
549 echo "WARNING! If you wish to build 64-bit library, then you have to"
550 echo " invoke './Configure darwin64-ppc-cc' *manually*."
551 if [ "$TEST" = "false" -a -t 1 ]; then
552 echo " You have about 5 seconds to press Ctrl-C to abort."
553 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
556 OUT="darwin-ppc-cc" ;;
558 ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
559 if [ "$ISA64" = "1" ]; then
560 echo "WARNING! If you wish to build 64-bit library, then you have to"
561 echo " invoke './Configure darwin64-x86_64-cc' *manually*."
562 if [ "$TEST" = "false" -a -t 1 ]; then
563 echo " You have about 5 seconds to press Ctrl-C to abort."
564 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
567 OUT="darwin-i386-cc" ;;
569 ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
570 case ${ISA:-generic} in
571 *[678]) OUT="linux-alpha+bwx-$CC" ;;
572 *) OUT="linux-alpha-$CC" ;;
574 if [ "$CC" = "gcc" ]; then
575 case ${ISA:-generic} in
576 EV5|EV45) options="$options -mcpu=ev5";;
577 EV56|PCA56) options="$options -mcpu=ev56";;
578 *) options="$options -mcpu=ev6";;
583 echo "WARNING! If you wish to build 64-bit library, then you have to"
584 echo " invoke './Configure linux-ppc64' *manually*."
585 if [ "$TEST" = "false" -a -t 1 ]; then
586 echo " You have about 5 seconds to press Ctrl-C to abort."
587 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
591 ppc-*-linux2) OUT="linux-ppc" ;;
592 ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;;
593 ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;;
594 pentium-*-vxworks*) OUT="vxworks-pentium" ;;
595 simlinux-*-vxworks*) OUT="vxworks-simlinux" ;;
596 mips-*-vxworks*) OUT="vxworks-mips";;
597 ia64-*-linux?) OUT="linux-ia64" ;;
599 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
600 echo " and wish to build 64-bit library, then you have to"
601 echo " invoke './Configure linux64-sparcv9' *manually*."
602 if [ "$TEST" = "false" -a -t 1 ]; then
603 echo " You have about 5 seconds to press Ctrl-C to abort."
604 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
606 OUT="linux-sparcv9" ;;
608 KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo`
609 case ${KARCH:-sun4} in
610 sun4u*) OUT="linux-sparcv9" ;;
611 sun4m) OUT="linux-sparcv8" ;;
612 sun4d) OUT="linux-sparcv8" ;;
613 *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
616 # 64-bit builds under parisc64 linux are not supported and
617 # compiler is expected to generate 32-bit objects...
618 CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo`
619 CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo`
621 # ??TODO ?? Model transformations
622 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
623 # assuming no further arch. identification will ever be used by GCC.
624 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
625 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
626 # for these chips in the future.
627 # PA7300LC -> 7100LC (1.1)
628 # PA8200 -> 8000 (2.0)
629 # PA8500 -> 8000 (2.0)
630 # PA8600 -> 8000 (2.0)
632 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'`
633 # Finish Model transformations
635 options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
636 OUT="linux-generic32" ;;
637 armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
638 armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;;
639 arm*-*-linux2) OUT="linux-armv4" ;;
640 sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
641 sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
642 m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
643 s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
645 # To be uncommented when glibc bug is fixed, see Configure...
646 #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
647 # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
648 # echo " have to invoke './Configure linux32-s390x' *manually*."
649 # if [ "$TEST" = "false" -a -t -1 ]; then
650 # echo " You have about 5 seconds to press Ctrl-C to abort."
651 # (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
656 x86_64-*-linux?) OUT="linux-x86_64" ;;
657 *86-*-linux2) OUT="linux-elf"
658 if [ "$GCCVER" -gt 28 ]; then
659 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
660 options="$options -march=pentium"
662 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
663 options="$options -march=pentiumpro"
665 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
666 options="$options -march=k6"
669 *-*-linux1) OUT="linux-aout" ;;
670 *-*-linux2) OUT="linux-generic32" ;;
671 sun4[uv]*-*-solaris2)
672 OUT="solaris-sparcv9-$CC"
673 ISA64=`(isalist) 2>/dev/null | grep sparcv9`
674 if [ "$ISA64" != "" ]; then
675 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
676 echo "WARNING! If you wish to build 64-bit library, then you have to"
677 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
678 if [ "$TEST" = "false" -a -t 1 ]; then
679 echo " You have about 5 seconds to press Ctrl-C to abort."
680 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
682 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
683 # $GCC_ARCH denotes default ABI chosen by compiler driver
684 # (first one found on the $PATH). I assume that user
685 # expects certain consistency with the rest of his builds
686 # and therefore switch over to 64-bit. <appro>
687 OUT="solaris64-sparcv9-gcc"
688 echo "WARNING! If you wish to build 32-bit library, then you have to"
689 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
690 if [ "$TEST" = "false" -a -t 1 ]; then
691 echo " You have about 5 seconds to press Ctrl-C to abort."
692 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
694 elif [ "$GCC_ARCH" = "-m32" ]; then
695 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
696 echo " and wish to build 64-bit library, then you have to"
697 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
698 if [ "$TEST" = "false" -a -t 1 ]; then
699 echo " You have about 5 seconds to press Ctrl-C to abort."
700 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
705 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
706 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
707 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
709 ISA64=`(isalist) 2>/dev/null | grep amd64`
710 if [ "$ISA64" != "" ]; then
711 OUT="solaris64-x86_64-$CC"
713 OUT="solaris-x86-$CC"
714 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then
715 options="$options no-sse2"
719 *-*-sunos4) OUT="sunos-$CC" ;;
721 *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
722 alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
723 powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
724 sparc64-*-*bsd*) OUT="BSD-sparc64" ;;
725 ia64-*-*bsd*) OUT="BSD-ia64" ;;
726 amd64-*-*bsd*) OUT="BSD-x86_64" ;;
727 *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc...
728 if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD
729 libc=/usr/lib/libc.so
731 # ld searches for highest libc.so.* and so do we
732 libc=`(ls /usr/lib/libc.so.* | tail -1) 2>/dev/null`
734 case "`(file -L $libc) 2>/dev/null`" in
735 *ELF*) OUT="BSD-x86-elf" ;;
736 *) OUT="BSD-x86"; options="$options no-sse2" ;;
738 *-*-*bsd*) OUT="BSD-generic32" ;;
740 *-*-osf) OUT="osf1-alpha-cc" ;;
741 *-*-tru64) OUT="tru64-alpha-cc" ;;
743 if [ "$CC" = "gcc" ]; then
744 OUT="unixware-7-gcc" ; options="$options no-sse2"
746 OUT="unixware-7" ; options="$options no-sse2 -D__i386__"
749 *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;;
750 *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;;
752 options="$options no-threads no-shared no-asm no-dso"
755 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
756 RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
757 *-siemens-sysv4) OUT="SINIX" ;;
759 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
760 OUT="hpux64-parisc2-gcc"
762 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
763 KERNEL_BITS=${KERNEL_BITS:-32}
764 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
765 CPU_VERSION=${CPU_VERSION:-0}
766 # See <sys/unistd.h> for further info on CPU_VERSION.
767 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
768 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
773 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
774 OUT=${OUT:-"hpux-parisc2-${CC}"}
775 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
776 echo "WARNING! If you wish to build 64-bit library then you have to"
777 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
778 if [ "$TEST" = "false" -a -t 1 ]; then
779 echo " You have about 5 seconds to press Ctrl-C to abort."
780 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
783 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
784 OUT="hpux-parisc-${CC}"
785 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
786 OUT="hpux-parisc-${CC}"
787 else # Motorola(?) CPU
790 options="$options -D_REENTRANT" ;;
791 *-hpux) OUT="hpux-parisc-$CC" ;;
793 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
794 KERNEL_BITS=${KERNEL_BITS:-32}
795 OBJECT_MODE=${OBJECT_MODE:-32}
796 if [ "$CC" = "gcc" ]; then
798 if [ $OBJECT_MODE -eq 64 ]; then
799 echo 'Your $OBJECT_MODE was found to be set to 64'
802 elif [ $OBJECT_MODE -eq 64 ]; then
803 echo 'Your $OBJECT_MODE was found to be set to 64'
807 if [ $KERNEL_BITS -eq 64 ]; then
808 echo "WARNING! If you wish to build 64-bit kit, then you have to"
809 echo " invoke './Configure aix64-cc' *manually*."
810 if [ "$TEST" = "false" -a -t 1 ]; then
811 echo " You have ~5 seconds to press Ctrl-C to abort."
812 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
816 if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then
817 : # this applies even to Power3 and later, as they return PowerPC_POWER[345]
819 options="$options no-asm"
822 # these are all covered by the catchall below
823 # *-dgux) OUT="dgux" ;;
824 mips-sony-newsos4) OUT="newsos4-gcc" ;;
825 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
826 *-*-cygwin) OUT="Cygwin" ;;
827 t3e-cray-unicosmk) OUT="cray-t3e" ;;
828 j90-cray-unicos) OUT="cray-j90" ;;
829 nsr-tandem-nsk) OUT="tandem-c89" ;;
830 beos-*) OUT="$GUESSOS" ;;
831 x86pc-*-qnx6) OUT="QNX6-i386" ;;
832 *-*-qnx6) OUT="QNX6" ;;
833 armv[7-9]*-*-android) OUT="android-armv7" ;;
834 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
837 # NB: This atalla support has been superceded by the ENGINE support
838 # That contains its own header and definitions anyway. Support can
839 # be enabled or disabled on any supported platform without external
840 # headers, eg. by adding the "hw-atalla" switch to ./config or
843 # See whether we can compile Atalla support
844 #if [ -f /usr/include/atasi.h ]
846 # options="$options -DATALLA"
849 if [ -n "$CONFIG_OPTIONS" ]; then
850 options="$options $CONFIG_OPTIONS"
853 if [ -z "$CONFIG_SKIP_NOEXECSTACK" ]; then
854 ! expr "$options" : '.*no\-asm' > /dev/null && \
855 ($CC -Wa,--help -c -o /dev/null -x assembler /dev/null 2>&1 | \
856 grep \\--noexecstack) 2>&1 > /dev/null && \
857 options="$options -Wa,--noexecstack"
860 # gcc < 2.8 does not support -march=ultrasparc
861 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
863 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
864 echo " Upgrade to gcc-2.8 or later."
866 OUT=solaris-sparcv8-gcc
868 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
870 echo "WARNING! Falling down to 'linux-sparcv8'."
871 echo " Upgrade to gcc-2.8 or later."
877 i386-*) options="$options 386" ;;
880 for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
882 if [ ! -d crypto/$i ]
884 options="$options no-$i"
888 # Discover Kerberos 5 (since it's still a prototype, we don't
889 # do any guesses yet, that's why this section is commented away.
890 #if [ -d /usr/kerberos ]; then
891 # krb5_dir=/usr/kerberos
892 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
893 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
894 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
895 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
896 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
897 # options="$options --with-krb5-flavor=MIT"
899 #elif [ -d /usr/heimdal ]; then
900 # krb5_dir=/usr/heimdal
901 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
902 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
903 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
904 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
905 # options="$options --with-krb5-flavor=Heimdal"
909 if [ -z "$OUT" ]; then
913 if [ ".$PERL" = . ] ; then
914 for i in . `echo $PATH | sed 's/:/ /g'`; do
915 if [ -f "$i/perl5$EXE" ] ; then
922 if [ ".$PERL" = . ] ; then
923 for i in . `echo $PATH | sed 's/:/ /g'`; do
924 if [ -f "$i/perl$EXE" ] ; then
925 if "$i/perl$EXE" -e 'exit($]<5.0)'; then
933 if [ ".$PERL" = . ] ; then
934 echo "You need Perl 5."
938 # run Configure to check to see if we need to specify the
939 # compiler for the platform ... in which case we add it on
940 # the end ... otherwise we leave it off
942 $PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
943 if [ $? = "0" ]; then
949 $PERL ./Configure LIST | grep "$OUT" > /dev/null
950 if [ $? = "0" ]; then
951 echo Configuring for $OUT
953 if [ "$TEST" = "true" ]; then
954 echo $PERL ./Configure $OUT $options
956 $PERL ./Configure $OUT $options
959 echo "This system ($OUT) is not supported. See file INSTALL for details."