2 # Copyright 1998-2016 The OpenSSL Project Authors. All Rights Reserved.
4 # Licensed under the OpenSSL license (the "License"). You may not use
5 # this file except in compliance with the License. You can obtain a copy
6 # in the file LICENSE in the source distribution or at
7 # https://www.openssl.org/source/license.html
9 # OpenSSL config: determine the operating system and run ./Configure
10 # Derived from minarch and GuessOS from Apache.
12 # Do "config -h" for usage information.
19 # pick up any command line args to config
23 -d*) options=$options" --debug";;
24 -t*) DRYRUN="true" VERBOSE="true";;
26 -h*) DRYRUN="true"; cat <<EOF
27 Usage: config [options]
28 -d Build with debugging when possible.
29 -t Test mode, do not run the Configure perl script.
30 -v Verbose mode, show the exact Configure call that is being made.
33 Any other text will be passed to the Configure perl script.
34 See INSTALL for instructions.
38 *) options=$options" $i" ;;
42 # First get uname entries that we use below
44 [ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
45 [ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
46 [ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
47 [ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
50 # Now test for ISC and SCO, since it is has a braindamaged uname.
52 # We need to work around FreeBSD 1.1.5.1
54 XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
55 if [ "x$XREL" != "x" ]; then
56 if [ -f /etc/kconfig ]; then
59 echo "${MACHINE}-whatever-isc4"; exit 0
65 echo "whatever-whatever-sco3"; exit 0
68 echo "whatever-whatever-sco5"; exit 0
72 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
73 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
74 x2*) echo "whatever-whatever-unixware2"; exit 0 ;;
78 echo "whatever-whatever-unixware1"; exit 0
82 # We hardcode i586 in place of ${MACHINE} for the
83 # following reason. The catch is that even though Pentium
84 # is minimum requirement for platforms in question,
85 # ${MACHINE} gets always assigned to i386. Now, problem
86 # with i386 is that it makes ./config pass 386 to
87 # ./Configure, which in turn makes make generate
88 # inefficient SHA-1 (for this moment) code.
89 x[678]*) echo "i586-sco-unixware7"; exit 0 ;;
95 # Now we simply scan though... In most cases, the SYSTEM info is enough
97 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
99 echo "m68k-apple-aux3"; exit 0
103 echo "${MACHINE}-ibm-aix"; exit 0
107 echo "${MACHINE}-ibm-aix"; exit 0
111 echo "${MACHINE}-ibm-aix3"; exit 0
115 echo "${MACHINE}-hi-hiux"; exit 0
119 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
121 1[0-9].*) # HPUX 10 and 11 targets are unified
122 echo "${MACHINE}-hp-hpux1x"; exit 0
125 echo "${MACHINE}-hp-hpux"; exit 0
131 echo "mips3-sgi-irix"; exit 0
135 echo "mips4-sgi-irix64"; exit 0
139 echo "${MACHINE}-whatever-linux2"; exit 0
143 echo "${MACHINE}-whatever-linux1"; exit 0
147 echo "hurd-x86"; exit 0;
151 echo "${MACHINE}-lynx-lynxos"; exit 0
154 BSD/OS:4.*) # BSD/OS always says 386
155 echo "i486-whatever-bsdi4"; exit 0
158 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
159 case `/sbin/sysctl -n hw.model` in
161 echo "i586-whatever-bsdi"; exit 0
164 echo "i386-whatever-bsdi"; exit 0
170 echo "${MACHINE}-whatever-bsdi"; exit 0
174 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
175 MACH=`sysctl -n hw.model`
178 *386* ) MACH="i386" ;;
179 *486* ) MACH="i486" ;;
180 Pentium\ II*) MACH="i686" ;;
181 Pentium* ) MACH="i586" ;;
182 * ) MACH="$MACHINE" ;;
185 i[0-9]86 ) ARCH="pc" ;;
187 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
191 echo "${MACHINE}-whatever-dragonfly"; exit 0
195 echo "${MACHINE}-whatever-freebsd"; exit 0
199 echo "${MACHINE}-whatever-haiku"; exit 0
203 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
207 echo "${MACHINE}-whatever-netbsd"; exit 0
211 echo "${MACHINE}-whatever-openbsd"; exit 0
215 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
219 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
222 echo "${MACHINE}-dec-tru64"; exit 0
225 echo "${MACHINE}-dec-osf"; exit 0
228 echo "${MACHINE}-dec-osf"; exit 0
236 echo "${MACHINE}-whatever-qnx4"
239 echo "${MACHINE}-whatever-qnx6"
242 echo "${MACHINE}-whatever-qnx"
249 echo "i860-intel-osf1"; exit 0
253 echo "ppc-apple-rhapsody"; exit 0
259 echo "ppc-apple-darwin${VERSION}"
262 echo "x86_64-apple-darwin${VERSION}"
265 echo "i686-apple-darwin${VERSION}"
272 echo "${MACHINE}-whatever-solaris2"; exit 0
276 echo "${MACHINE}-sun-sunos4"; exit 0
280 echo "${MACHINE}-whatever-sysv4"; exit 0
284 echo "i386-stratus-vos"; exit 0
288 echo "hppa1.1-stratus-vos"; exit 0
292 echo "${MACHINE}-whatever-sysv4"; exit 0
296 echo "${MACHINE}-whatever-sysv4"; exit 0
299 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*)
300 echo "i486-ncr-sysv4"; exit 0
304 echo "${MACHINE}-unknown-ultrix"; exit 0
308 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
312 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
316 echo "${MACHINE}-ncr-sysv4"; exit 0
320 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
324 echo "${MACHINE}-whatever-mingw"; exit 0;
327 echo "${MACHINE}-pc-cygwin"; exit 0
331 echo "${MACHINE}-whatever-vxworks"; exit 0;
336 # Ugg. These are all we can determine by what we know about
337 # the output of uname. Be more creative:
340 # Do the Apollo stuff first. Here, we just simply assume
341 # that the existence of the /usr/apollo directory is proof
343 if [ -d /usr/apollo ]; then
344 echo "whatever-apollo-whatever"
349 ISNEXT=`hostinfo 2>/dev/null`
352 echo "whatever-next-nextstep3.3"; exit 0
355 echo "whatever-next-nextstep"; exit 0
359 # At this point we gone through all the one's
362 echo "${MACHINE}-whatever-${SYSTEM}"
366 # ---------------------------------------------------------------------------
367 # this is where the translation occurs into SSLeay terms
368 # ---------------------------------------------------------------------------
370 # Only set CC if not supplied already
371 if [ -z "$CROSS_COMPILE$CC" ]; then
372 GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null`
373 if [ "$GCCVER" != "" ]; then
374 # then strip off whatever prefix egcs prepends the number with...
375 # Hopefully, this will work for any future prefixes as well.
376 GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
377 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
378 # does give us what we want though, so we use that. We just just the
379 # major and minor version numbers.
380 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
381 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
388 if [ "$SYSTEM" = "HP-UX" ];then
389 # By default gcc is a ILP32 compiler (with long long == 64).
391 if [ $GCCVER -ge 30 ]; then
392 # PA64 support only came in with gcc 3.0.x.
393 # We check if the preprocessor symbol __LP64__ is defined...
394 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
395 : # __LP64__ has slipped through, it therefore is not defined
401 if [ "$SYSTEM" = "SunOS" ]; then
402 if [ $GCCVER -ge 30 ]; then
403 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
404 # to be working, at the very least 'make test' passes...
405 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
411 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
412 CCVER=`(cc -V 2>&1) 2>/dev/null | \
413 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
414 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
416 if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then
417 CC=cc # overrides gcc!!!
418 if [ $CCVER -eq 50 ]; then
419 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
420 echo " patch #107357-01 or later applied."
426 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
427 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
432 # read the output of the embedded GuessOS
435 echo Operating system: $GUESSOS
437 # now map the output into SSLeay terms ... really should hack into the
438 # script above so we end up with values in vars but that would take
439 # more time that I want to waste at the moment
448 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
450 #if [ $CPU -ge 5000 ]; then
451 # options="$options -mips4"
453 # options="$options -mips3"
458 echo "WARNING! If you wish to build 64-bit library, then you have to"
459 echo " invoke '$THERE/Configure irix64-mips4-$CC' *manually*."
460 if [ "$DRYRUN" = "false" -a -t 1 ]; then
461 echo " You have about 5 seconds to press Ctrl-C to abort."
462 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
464 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
466 #if [ $CPU -ge 5000 ]; then
467 # options="$options -mips4"
469 # options="$options -mips3"
473 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
475 ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
476 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
477 echo "WARNING! If you wish to build 64-bit library, then you have to"
478 echo " invoke '$THERE/Configure darwin64-ppc-cc' *manually*."
479 if [ "$DRYRUN" = "false" -a -t 1 ]; then
480 echo " You have about 5 seconds to press Ctrl-C to abort."
481 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
484 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
485 OUT="darwin64-ppc-cc"
490 ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
491 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
492 echo "WARNING! If you wish to build 64-bit library, then you have to"
493 echo " invoke 'KERNEL_BITS=64 $THERE/config $options'."
494 if [ "$DRYRUN" = "false" -a -t 1 ]; then
495 echo " You have about 5 seconds to press Ctrl-C to abort."
496 # The stty technique used elsewhere doesn't work on
497 # MacOS. At least, right now on this Mac.
501 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
502 OUT="darwin64-x86_64-cc"
506 x86_64-apple-darwin*)
507 if [ -z "$KERNEL_BITS" ]; then
508 echo "WARNING! If you wish to build 32-bit library, then you have to"
509 echo " invoke 'KERNEL_BITS=32 $THERE/config $options'."
510 if [ "$DRYRUN" = "false" -a -t 1 ]; then
511 echo " You have about 5 seconds to press Ctrl-C to abort."
512 # The stty technique used elsewhere doesn't work on
513 # MacOS. At least, right now on this Mac.
517 if [ "$KERNEL_BITS" = "32" ]; then
520 OUT="darwin64-x86_64-cc"
523 options="$options -arch%20armv6 -arch%20armv7"
524 OUT="iphoneos-cross" ;;
526 options="$options -arch%20${MACHINE}"
527 OUT="iphoneos-cross" ;;
528 arm64-*-iphoneos|*-*-ios64)
531 ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
532 case ${ISA:-generic} in
533 *[678]) OUT="linux-alpha+bwx-$CC" ;;
534 *) OUT="linux-alpha-$CC" ;;
536 if [ "$CC" = "gcc" ]; then
537 case ${ISA:-generic} in
538 EV5|EV45) options="$options -mcpu=ev5";;
539 EV56|PCA56) options="$options -mcpu=ev56";;
540 *) options="$options -mcpu=ev6";;
545 if [ -z "$KERNEL_BITS" ]; then
546 echo "WARNING! If you wish to build 64-bit library, then you have to"
547 echo " invoke '$THERE/Configure linux-ppc64' *manually*."
548 if [ "$DRYRUN" = "false" -a -t 1 ]; then
549 echo " You have about 5 seconds to press Ctrl-C to abort."
550 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
553 if [ "$KERNEL_BITS" = "64" ]; then
557 (echo "__LP64__" | gcc -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null) || options="$options -m32"
560 ppc64le-*-linux2) OUT="linux-ppc64le" ;;
561 ppc-*-linux2) OUT="linux-ppc" ;;
563 echo "WARNING! If you wish to build 64-bit library, then you have to"
564 echo " invoke '$THERE/Configure linux64-mips64' *manually*."
565 if [ "$DRYRUN" = "false" -a -t 1 ]; then
566 echo " You have about 5 seconds to press Ctrl-C to abort."
567 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
571 mips*-*-linux2) OUT="linux-mips32" ;;
572 ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;;
573 ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;;
574 pentium-*-vxworks*) OUT="vxworks-pentium" ;;
575 simlinux-*-vxworks*) OUT="vxworks-simlinux" ;;
576 mips-*-vxworks*) OUT="vxworks-mips";;
577 ia64-*-linux?) OUT="linux-ia64" ;;
579 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
580 echo " and wish to build 64-bit library, then you have to"
581 echo " invoke '$THERE/Configure linux64-sparcv9' *manually*."
582 if [ "$DRYRUN" = "false" -a -t 1 ]; then
583 echo " You have about 5 seconds to press Ctrl-C to abort."
584 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
586 OUT="linux-sparcv9" ;;
588 KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo`
589 case ${KARCH:-sun4} in
590 sun4u*) OUT="linux-sparcv9" ;;
591 sun4m) OUT="linux-sparcv8" ;;
592 sun4d) OUT="linux-sparcv8" ;;
593 *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
596 # 64-bit builds under parisc64 linux are not supported and
597 # compiler is expected to generate 32-bit objects...
598 CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo`
599 CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo`
601 # ??TODO ?? Model transformations
602 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
603 # assuming no further arch. identification will ever be used by GCC.
604 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
605 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
606 # for these chips in the future.
607 # PA7300LC -> 7100LC (1.1)
608 # PA8200 -> 8000 (2.0)
609 # PA8500 -> 8000 (2.0)
610 # PA8600 -> 8000 (2.0)
612 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'`
613 # Finish Model transformations
615 options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
616 OUT="linux-generic32" ;;
617 armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
618 armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;;
619 arm*-*-linux2) OUT="linux-armv4" ;;
620 aarch64-*-linux2) OUT="linux-aarch64" ;;
621 sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
622 sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
623 m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
624 s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
626 # To be uncommented when glibc bug is fixed, see Configure...
627 #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
628 # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
629 # echo " have to invoke './Configure linux32-s390x' *manually*."
630 # if [ "$DRYRUN" = "false" -a -t -1 ]; then
631 # echo " You have about 5 seconds to press Ctrl-C to abort."
632 # (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
638 if $CC -dM -E -x c /dev/null 2>&1 | grep -q ILP32 > /dev/null; then
644 # On machines where the compiler understands -m32, prefer a
645 # config target that uses it
646 if $CC -m32 -E -x c /dev/null > /dev/null 2>&1; then
651 *86-*-linux1) OUT="linux-aout" ;;
652 *-*-linux?) OUT="linux-generic32" ;;
653 sun4[uv]*-*-solaris2)
654 OUT="solaris-sparcv9-$CC"
655 ISA64=`(isainfo) 2>/dev/null | grep sparcv9`
656 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then
657 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
658 echo "WARNING! If you wish to build 64-bit library, then you have to"
659 echo " invoke '$THERE/Configure solaris64-sparcv9-cc' *manually*."
660 if [ "$DRYRUN" = "false" -a -t 1 ]; then
661 echo " You have about 5 seconds to press Ctrl-C to abort."
662 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
664 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
665 # $GCC_ARCH denotes default ABI chosen by compiler driver
666 # (first one found on the $PATH). I assume that user
667 # expects certain consistency with the rest of his builds
668 # and therefore switch over to 64-bit. <appro>
669 OUT="solaris64-sparcv9-gcc"
670 echo "WARNING! If you wish to build 32-bit library, then you have to"
671 echo " invoke '$THERE/Configure solaris-sparcv9-gcc' *manually*."
672 if [ "$DRYRUN" = "false" -a -t 1 ]; then
673 echo " You have about 5 seconds to press Ctrl-C to abort."
674 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
676 elif [ "$GCC_ARCH" = "-m32" ]; then
677 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
678 echo " and wish to build 64-bit library, then you have to"
679 echo " invoke '$THERE/Configure solaris64-sparcv9-gcc' *manually*."
680 if [ "$DRYRUN" = "false" -a -t 1 ]; then
681 echo " You have about 5 seconds to press Ctrl-C to abort."
682 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
686 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then
687 OUT="solaris64-sparcv9-$CC"
690 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
691 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
692 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
694 ISA64=`(isainfo) 2>/dev/null | grep amd64`
695 if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then
696 OUT="solaris64-x86_64-$CC"
698 OUT="solaris-x86-$CC"
699 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then
700 options="$options no-sse2"
704 *-*-sunos4) OUT="sunos-$CC" ;;
706 *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
707 alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
708 powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
709 sparc64-*-*bsd*) OUT="BSD-sparc64" ;;
710 ia64-*-*bsd*) OUT="BSD-ia64" ;;
711 x86_64-*-dragonfly*) OUT="BSD-x86_64" ;;
712 amd64-*-*bsd*) OUT="BSD-x86_64" ;;
713 *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc...
714 if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD
715 libc=/usr/lib/libc.so
717 # ld searches for highest libc.so.* and so do we
718 libc=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null`
720 case "`(file -L $libc) 2>/dev/null`" in
721 *ELF*) OUT="BSD-x86-elf" ;;
722 *) OUT="BSD-x86"; options="$options no-sse2" ;;
724 *-*-*bsd*) OUT="BSD-generic32" ;;
726 x86_64-*-haiku) OUT="haiku-x86_64" ;;
727 *-*-haiku) OUT="haiku-x86" ;;
729 *-*-osf) OUT="osf1-alpha-cc" ;;
730 *-*-tru64) OUT="tru64-alpha-cc" ;;
732 if [ "$CC" = "gcc" ]; then
733 OUT="unixware-7-gcc" ; options="$options no-sse2"
735 OUT="unixware-7" ; options="$options no-sse2 -D__i386__"
738 *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;;
739 *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;;
741 options="$options no-threads no-shared no-asm no-dso"
744 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
746 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
747 OUT="hpux64-parisc2-gcc"
749 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
750 KERNEL_BITS=${KERNEL_BITS:-32}
751 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
752 CPU_VERSION=${CPU_VERSION:-0}
753 # See <sys/unistd.h> for further info on CPU_VERSION.
754 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
755 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
760 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
761 OUT=${OUT:-"hpux-parisc2-${CC}"}
762 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
763 echo "WARNING! If you wish to build 64-bit library then you have to"
764 echo " invoke '$THERE/Configure hpux64-parisc2-cc' *manually*."
765 if [ "$DRYRUN" = "false" -a -t 1 ]; then
766 echo " You have about 5 seconds to press Ctrl-C to abort."
767 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
770 # PA-RISC 2.0 is no longer supported as separate 32-bit
771 # target. This is compensated for by run-time detection
772 # in most critical assembly modules and taking advantage
773 # of 2.0 architecture in PA-RISC 1.1 build.
774 OUT="hpux-parisc1_1-${CC}"
775 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
776 OUT="hpux-parisc1_1-${CC}"
777 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
778 OUT="hpux-parisc-${CC}"
779 else # Motorola(?) CPU
782 options="$options -D_REENTRANT" ;;
783 *-hpux) OUT="hpux-parisc-$CC" ;;
785 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
786 KERNEL_BITS=${KERNEL_BITS:-32}
787 OBJECT_MODE=${OBJECT_MODE:-32}
788 if [ "$CC" = "gcc" ]; then
790 if [ $OBJECT_MODE -eq 64 ]; then
791 echo 'Your $OBJECT_MODE was found to be set to 64'
794 elif [ $OBJECT_MODE -eq 64 ]; then
795 echo 'Your $OBJECT_MODE was found to be set to 64'
799 if [ $KERNEL_BITS -eq 64 ]; then
800 echo "WARNING! If you wish to build 64-bit kit, then you have to"
801 echo " invoke '$THERE/Configure aix64-cc' *manually*."
802 if [ "$DRYRUN" = "false" -a -t 1 ]; then
803 echo " You have ~5 seconds to press Ctrl-C to abort."
804 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1
808 if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then
809 : # this applies even to Power3 and later, as they return PowerPC_POWER[345]
811 options="$options no-asm"
814 # these are all covered by the catchall below
815 i[3456]86-*-cygwin) OUT="Cygwin-x86" ;;
816 *-*-cygwin) OUT="Cygwin-${MACHINE}" ;;
817 x86pc-*-qnx6) OUT="QNX6-i386" ;;
818 *-*-qnx6) OUT="QNX6" ;;
819 x86-*-android|i?86-*-android) OUT="android-x86" ;;
820 armv[7-9]*-*-android)
821 OUT="android-armeabi"; options="$options -march=armv7-a" ;;
822 arm*-*-android) OUT="android-armeabi" ;;
823 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
826 # NB: This atalla support has been superseded by the ENGINE support
827 # That contains its own header and definitions anyway. Support can
828 # be enabled or disabled on any supported platform without external
829 # headers, eg. by adding the "hw-atalla" switch to ./config or
832 # See whether we can compile Atalla support
833 #if [ -f /usr/include/atasi.h ]
835 # options="$options -DATALLA"
838 if [ -n "$CONFIG_OPTIONS" ]; then
839 options="$options $CONFIG_OPTIONS"
842 if expr "$options" : '.*no\-asm' > /dev/null; then :; else
843 sh -c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \
844 grep \\--noexecstack >/dev/null && \
845 options="$options -Wa,--noexecstack"
848 # gcc < 2.8 does not support -march=ultrasparc
849 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
851 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
852 echo " Upgrade to gcc-2.8 or later."
854 OUT=solaris-sparcv8-gcc
856 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
858 echo "WARNING! Falling down to 'linux-sparcv8'."
859 echo " Upgrade to gcc-2.8 or later."
865 i386-*) options="$options 386" ;;
868 for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
870 if [ ! -d $THERE/crypto/$i ]
872 options="$options no-$i"
876 if [ -z "$OUT" ]; then
880 if [ ".$PERL" = . ] ; then
881 for i in . `echo $PATH | sed 's/:/ /g'`; do
882 if [ -f "$i/perl5$EXE" ] ; then
889 if [ ".$PERL" = . ] ; then
890 for i in . `echo $PATH | sed 's/:/ /g'`; do
891 if [ -f "$i/perl$EXE" ] ; then
892 if "$i/perl$EXE" -e 'exit($]<5.0)'; then
900 if [ ".$PERL" = . ] ; then
901 echo "You need Perl 5."
905 # run Configure to check to see if we need to specify the
906 # compiler for the platform ... in which case we add it on
907 # the end ... otherwise we leave it off
909 $PERL $THERE/Configure LIST | grep "$OUT-$CC" > /dev/null
910 if [ $? = "0" ]; then
916 $PERL $THERE/Configure LIST | grep "$OUT" > /dev/null
917 if [ $? = "0" ]; then
918 if [ "$VERBOSE" = "true" ]; then
919 echo $PERL $THERE/Configure $OUT $options
921 if [ "$DRYRUN" = "false" ]; then
922 $PERL $THERE/Configure $OUT $options
925 echo "This system ($OUT) is not supported. See file INSTALL for details."