3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
27 # pick up any command line args to config
31 -d*) PREFIX="debug-";;
33 -h*) TEST="true"; cat <<EOF
34 Usage: config [options]
35 -d Add a debug- prefix to machine choice.
36 -t Test mode, do not run the Configure perl script.
39 Any other text will be passed to the Configure perl script.
40 See INSTALL for instructions.
44 *) options=$options" $i" ;;
48 # First get uname entries that we use below
50 MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
51 RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
52 SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
53 VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
56 # Now test for ISC and SCO, since it is has a braindamaged uname.
58 # We need to work around FreeBSD 1.1.5.1
60 XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
61 if [ "x$XREL" != "x" ]; then
62 if [ -f /etc/kconfig ]; then
65 echo "${MACHINE}-whatever-isc4"; exit 0
71 echo "whatever-whatever-sco3"; exit 0
74 echo "whatever-whatever-sco5"; exit 0
77 if [ "x$VERSION" = "x2.01" ]; then
78 echo "${MACHINE}-whatever-unixware201"; exit 0
79 elif [ "x$VERSION" = "x2.02" ]; then
80 echo "${MACHINE}-whatever-unixware202"; exit 0
81 elif [ "x$VERSION" = "x2.03" ]; then
82 echo "${MACHINE}-whatever-unixware203"; exit 0
83 elif [ "x$VERSION" = "x2.1.1" ]; then
84 echo "${MACHINE}-whatever-unixware211"; exit 0
85 elif [ "x$VERSION" = "x2.1.2" ]; then
86 echo "${MACHINE}-whatever-unixware212"; exit 0
87 elif [ "x$VERSION" = "x2.1.3" ]; then
88 echo "${MACHINE}-whatever-unixware213"; exit 0
90 echo "${MACHINE}-whatever-unixware2"; exit 0
94 echo "whatever-whatever-unixware1"; exit 0
97 if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x8" ]; then
98 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
102 if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then
103 echo "${MACHINE}-sco-unixware7"; exit 0
109 # Now we simply scan though... In most cases, the SYSTEM info is enough
111 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
113 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
114 echo "parisc-hp-MPE/iX"; exit 0
117 echo "m68k-apple-aux3"; exit 0
121 echo "${MACHINE}-ibm-aix43"; exit 0
125 echo "${MACHINE}-ibm-aix43"; exit 0
129 echo "${MACHINE}-ibm-aix"; exit 0
133 echo "${MACHINE}-dg-dgux"; exit 0
137 echo "${MACHINE}-hi-hiux"; exit 0
141 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
143 1[0-9].*) # HPUX 10 and 11 targets are unified
144 echo "${MACHINE}-hp-hpux10"; exit 0
147 echo "${MACHINE}-hp-hpux"; exit 0
153 echo "mips2-sgi-irix"; exit 0
157 echo "mips3-sgi-irix"; exit 0
161 echo "mips4-sgi-irix64"; exit 0
165 echo "${MACHINE}-whatever-linux2"; exit 0
169 echo "${MACHINE}-whatever-linux1"; exit 0
173 echo "hurd-x86"; exit 0;
177 echo "${MACHINE}-lynx-lynxos"; exit 0
180 BSD/OS:4.*) # BSD/OS always says 386
181 echo "i486-whatever-bsdi4"; exit 0
184 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
185 case `/sbin/sysctl -n hw.model` in
187 echo "i586-whatever-bsdi"; exit 0
190 echo "i386-whatever-bsdi"; exit 0
196 echo "${MACHINE}-whatever-bsdi"; exit 0
200 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
201 MACH=`sysctl -n hw.model`
204 *386* ) MACH="i386" ;;
205 *486* ) MACH="i486" ;;
206 Pentium\ II*) MACH="i686" ;;
207 Pentium* ) MACH="i586" ;;
208 Alpha* ) MACH="alpha" ;;
209 * ) MACH="$MACHINE" ;;
212 i[0-9]86 ) ARCH="pc" ;;
214 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
218 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
222 echo "${MACHINE}-whatever-netbsd"; exit 0
226 echo "${MACHINE}-whatever-openbsd"; exit 0
230 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
234 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
237 echo "${MACHINE}-dec-tru64"; exit 0
240 echo "${MACHINE}-dec-osf"; exit 0
243 echo "${MACHINE}-dec-osf"; exit 0
251 echo "${MACHINE}-whatever-qnx4"
254 echo "${MACHINE}-whatever-qnx6"
257 echo "${MACHINE}-whatever-qnx"
264 echo "i860-intel-osf1"; exit 0
268 echo "ppc-apple-rhapsody"; exit 0
274 echo "ppc-apple-darwin${VERSION}"
277 echo "i386-apple-darwin${VERSION}"
284 echo "${MACHINE}-whatever-solaris2"; exit 0
288 echo "${MACHINE}-sun-sunos4"; exit 0
292 echo "${MACHINE}-whatever-sysv4"; exit 0
296 echo "${MACHINE}-whatever-sysv4"; exit 0
300 echo "${MACHINE}-whatever-sysv4"; exit 0
303 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*)
304 echo "i486-ncr-sysv4"; exit 0
308 echo "${MACHINE}-unknown-ultrix"; exit 0
312 echo "${MACHINE}-siemens-sysv4"; exit 0
316 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
320 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
324 echo "${MACHINE}-ncr-sysv4"; exit 0
328 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
332 echo "mips-sony-newsos4"; exit 0;
338 echo "${MACHINE}-whatever-cygwin_pre1.3"
341 echo "${MACHINE}-whatever-cygwin"
348 echo "t3e-cray-unicosmk"; exit 0;
352 echo "j90-cray-unicos"; exit 0;
357 # Ugg. These are all we can determine by what we know about
358 # the output of uname. Be more creative:
361 # Do the Apollo stuff first. Here, we just simply assume
362 # that the existance of the /usr/apollo directory is proof
364 if [ -d /usr/apollo ]; then
365 echo "whatever-apollo-whatever"
370 ISNEXT=`hostinfo 2>/dev/null`
373 echo "whatever-next-nextstep3.3"; exit 0
376 echo "whatever-next-nextstep"; exit 0
380 # At this point we gone through all the one's
383 echo "${MACHINE}-whatever-${SYSTEM}"
387 # ---------------------------------------------------------------------------
388 # this is where the translation occurs into SSLeay terms
389 # ---------------------------------------------------------------------------
391 # figure out if gcc is available and if so we use it otherwise
392 # we fallback to whatever cc does on the system
393 GCCVER=`(gcc --version) 2>/dev/null | head -1`
394 if [ "$GCCVER" != "" ]; then
396 # then strip off whatever prefix Cygnus as well as GCC 3.1 prepends
397 # the number with... Hopefully, this will work for any future prefixes
399 GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z ()]*\-//'`
400 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
401 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
407 if [ "$SYSTEM" = "SunOS" ]; then
408 if [ $GCCVER -ge 30 ]; then
409 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
410 # to be working, at the very least 'make test' passes...
411 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
417 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
418 CCVER=`(cc -V 2>&1) 2>/dev/null | \
419 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
420 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
422 if [ $CCVER -gt 40 ]; then
423 CC=cc # overrides gcc!!!
424 if [ $CCVER -eq 50 ]; then
425 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
426 echo " patch #107357-01 or later applied."
429 elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then
434 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
435 # check for Compaq C, expected output is "blah-blah C Vx.x"
436 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
437 egrep -e '.* C V[0-9]\.[0-9]' | \
438 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
440 if [ $CCCVER -gt 60 ]; then
441 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
442 # only on hash routines and des, otherwise gcc (2.95)
443 # keeps along rather tight...
449 # read the output of the embedded GuessOS
452 echo Operating system: $GUESSOS
454 # now map the output into SSLeay terms ... really should hack into the
455 # script above so we end up with values in vars but that would take
456 # more time that I want to waste at the moment
459 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
461 if [ $CPU -ge 4000 ]; then
462 options="$options -mips2"
467 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
469 if [ $CPU -ge 5000 ]; then
470 options="$options -mips4"
472 options="$options -mips3"
477 echo "WARNING! If you wish to build 64-bit library, then you have to"
478 echo " invoke './Configure irix64-mips4-$CC' *manually*."
479 if [ "$TEST" = "false" ]; then
480 echo " You have about 5 seconds to press Ctrl-C to abort."
481 (stty -icanon min 0 time 50; read waste) < /dev/tty
483 CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
485 if [ $CPU -ge 5000 ]; then
486 options="$options -mips4"
488 options="$options -mips3"
493 ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo`
494 case ${ISA:-generic} in
495 *[67]) OUT="linux-alpha+bwx-$CC" ;;
496 *) OUT="linux-alpha-$CC" ;;
498 if [ "$CC" = "gcc" ]; then
499 case ${ISA:-generic} in
500 EV5|EV45) options="$options -mcpu=ev5";;
501 EV56|PCA56) options="$options -mcpu=ev56";;
502 EV6|EV67|PCA57) options="$options -mcpu=ev6";;
508 #include <stdio.h> /* for printf() prototype */
509 int main (argc, argv) int argc; char *argv[]; {
511 printf ("linux-%s\n", argv[1]);
514 printf ("linux-%sel\n", argv[1]);
519 ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
523 #Use the standard target for PPC architecture until we create a
524 #special one for the 64bit architecture.
526 ppc-*-linux2) OUT="linux-ppc" ;;
527 m68k-*-linux*) OUT="linux-m68k" ;;
528 ia64-*-linux?) OUT="linux-ia64" ;;
529 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
530 ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
531 i386-apple-darwin*) OUT="darwin-i386-cc" ;;
533 #Before we can uncomment following lines we have to wait at least
534 #till 64-bit glibc for SPARC is operational:-(
535 #echo "WARNING! If you wish to build 64-bit library, then you have to"
536 #echo " invoke './Configure linux64-sparcv9' *manually*."
537 #echo " Type return if you want to continue, Ctrl-C to abort."
538 #read waste < /dev/tty
539 OUT="linux-sparcv9" ;;
541 KARCH=`awk '/^type/{print$3}' /proc/cpuinfo`
542 case ${KARCH:-sun4} in
543 sun4u*) OUT="linux-sparcv9" ;;
544 sun4m) OUT="linux-sparcv8" ;;
545 sun4d) OUT="linux-sparcv8" ;;
546 *) OUT="linux-sparcv7" ;;
549 CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
550 CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo`
552 # ??TODO ?? Model transformations
553 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
554 # assuming no further arch. identification will ever be used by GCC.
555 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
556 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
557 # for these chips in the future.
558 # PA7300LC -> 7100LC (1.1)
559 # PA8200 -> 8000 (2.0)
560 # PA8500 -> 8000 (2.0)
561 # PA8600 -> 8000 (2.0)
563 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
564 # Finish Model transformations
566 options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
567 OUT="linux-parisc" ;;
568 arm*-*-linux2) OUT="linux-elf-arm" ;;
569 s390-*-linux2) OUT="linux-s390" ;;
570 s390x-*-linux?) OUT="linux-s390x" ;;
571 *-*-linux2) OUT="linux-elf"
572 if [ "$GCCVER" -gt 28 ]; then
573 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
576 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
579 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
583 *-*-linux1) OUT="linux-aout" ;;
585 OUT="solaris-sparcv9-$CC"
586 ISA64=`(isalist) 2>/dev/null | grep sparcv9`
587 if [ "$ISA64" != "" ]; then
588 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
589 echo "WARNING! If you wish to build 64-bit library, then you have to"
590 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
591 if [ "$TEST" = "false" ]; then
592 echo " You have about 5 seconds to press Ctrl-C to abort."
593 (stty -icanon min 0 time 50; read waste) < /dev/tty
595 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
596 # $GCC_ARCH denotes default ABI chosen by compiler driver
597 # (first one found on the $PATH). I assume that user
598 # expects certain consistency with the rest of his builds
599 # and therefore switch over to 64-bit. <appro>
600 OUT="solaris64-sparcv9-gcc"
601 echo "WARNING! If you wish to build 32-bit library, then you have to"
602 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
603 if [ "$TEST" = "false" ]; then
604 echo " You have about 5 seconds to press Ctrl-C to abort."
605 (stty -icanon min 0 time 50; read waste) < /dev/tty
607 elif [ "$GCC_ARCH" = "-m32" ]; then
608 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
609 echo " and wish to build 64-bit library, then you have to"
610 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
611 if [ "$TEST" = "false" ]; then
612 echo " You have about 5 seconds to press Ctrl-C to abort."
613 (stty -icanon min 0 time 50; read waste) < /dev/tty
618 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
619 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
620 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
621 *86*-*-solaris2) OUT="solaris-x86-$CC" ;;
622 *-*-sunos4) OUT="sunos-$CC" ;;
623 alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;;
624 *-freebsd[3-9]*) OUT="FreeBSD-elf" ;;
625 *-freebsd[1-2]*) OUT="FreeBSD" ;;
626 *86*-*-netbsd) OUT="NetBSD-x86" ;;
627 sun3*-*-netbsd) OUT="NetBSD-m68" ;;
628 *-*-netbsd) OUT="NetBSD-sparc" ;;
629 alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
630 *86*-*-openbsd) OUT="OpenBSD-i386" ;;
631 m68k*-*-openbsd) OUT="OpenBSD-m68k" ;;
632 m88k*-*-openbsd) OUT="OpenBSD-m88k" ;;
633 mips*-*-openbsd) OUT="OpenBSD-mips" ;;
634 pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
635 powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;;
636 sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;;
637 sparc*-*-openbsd) OUT="OpenBSD-sparc" ;;
638 vax*-*-openbsd) OUT="OpenBSD-vax" ;;
639 hppa*-*-openbsd) OUT="OpenBSD-hppa" ;;
640 *-*-openbsd) OUT="OpenBSD" ;;
641 *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
642 *-*-osf) OUT="alphaold-cc" ;;
643 *-*-tru64) OUT="alpha-cc" ;;
645 if [ "$CC" = "gcc" ]; then
651 *-*-unixware7) OUT="unixware-7" ;;
652 *-*-UnixWare7) OUT="unixware-7" ;;
653 *-*-Unixware7) OUT="unixware-7" ;;
654 *-*-unixware20*) OUT="unixware-2.0" ;;
655 *-*-unixware21*) OUT="unixware-2.1" ;;
656 *-*-UnixWare20*) OUT="unixware-2.0" ;;
657 *-*-UnixWare21*) OUT="unixware-2.1" ;;
658 *-*-Unixware20*) OUT="unixware-2.0" ;;
659 *-*-Unixware21*) OUT="unixware-2.1" ;;
660 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
661 RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
662 *-siemens-sysv4) OUT="SINIX" ;;
664 OUT="hpux-parisc-$CC"
665 KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
666 KERNEL_BITS=${KERNEL_BITS:-32}
667 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
668 CPU_VERSION=${CPU_VERSION:-0}
669 # See <sys/unistd.h> for further info on CPU_VERSION.
670 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
671 echo "NOTICE! 64-bit is the only ABI currently operational on HP-UXi."
672 echo " Post request to openssl-dev@openssl.org for 32-bit support."
673 if [ "$TEST" = "false" ]; then
674 (stty -icanon min 0 time 50; read waste) < /dev/tty
677 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
678 if [ "$CC" = "cc" ]; then
679 OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc?
681 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
682 echo "WARNING! If you wish to build 64-bit library then you have to"
683 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
684 if [ "$TEST" = "false" ]; then
685 echo " You have about 5 seconds to press Ctrl-C to abort."
686 (stty -icanon min 0 time 50; read waste) < /dev/tty
689 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
691 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
693 else # Motorola(?) CPU
696 options="$options -D_REENTRANT" ;;
697 *-hpux) OUT="hpux-parisc-$CC" ;;
698 # these are all covered by the catchall below
699 # *-aix) OUT="aix-$CC" ;;
700 # *-dgux) OUT="dgux" ;;
701 mips-sony-newsos4) OUT="newsos4-gcc" ;;
702 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
703 *-*-cygwin) OUT="Cygwin" ;;
704 t3e-cray-unicosmk) OUT="cray-t3e" ;;
705 j90-cray-unicos) OUT="cray-j90" ;;
706 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
709 # NB: This atalla support has been superceded by the ENGINE support
710 # That contains its own header and definitions anyway. Support can
711 # be enabled or disabled on any supported platform without external
712 # headers, eg. by adding the "hw-atalla" switch to ./config or
715 # See whether we can compile Atalla support
716 #if [ -f /usr/include/atasi.h ]
718 # options="$options -DATALLA"
721 # gcc < 2.8 does not support -mcpu=ultrasparc
722 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
724 echo "WARNING! Do consider upgrading to gcc-2.8 or later."
726 OUT=solaris-sparcv9-gcc27
728 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
730 echo "WARNING! Falling down to 'linux-sparcv8'."
731 echo " Upgrade to gcc-2.8 or later."
737 i386-*) options="$options 386" ;;
740 for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 rijndael ripemd rsa sha
742 if [ ! -d crypto/$i ]
744 options="$options no-$i"
748 # Discover Kerberos 5 (since it's still a prototype, we don't
749 # do any guesses yet, that's why this section is commented away.
750 #if [ -d /usr/kerberos ]; then
751 # krb5_dir=/usr/kerberos
752 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
753 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
754 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
755 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
756 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
757 # options="$options --with-krb5-flavor=MIT"
759 #elif [ -d /usr/heimdal ]; then
760 # krb5_dir=/usr/heimdal
761 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
762 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
763 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
764 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
765 # options="$options --with-krb5-flavor=Heimdal"
769 if [ -z "$OUT" ]; then
773 if [ ".$PERL" = . ] ; then
774 for i in . `echo $PATH | sed 's/:/ /g'`; do
775 if [ -f "$i/perl5" ] ; then
782 if [ ".$PERL" = . ] ; then
783 for i in . `echo $PATH | sed 's/:/ /g'`; do
784 if [ -f "$i/perl" ] ; then
785 if "$i/perl" -e 'exit($]<5.0)'; then
793 if [ ".$PERL" = . ] ; then
794 echo "You need Perl 5."
798 # run Configure to check to see if we need to specify the
799 # compiler for the platform ... in which case we add it on
800 # the end ... otherwise we leave it off
802 $PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
803 if [ $? = "0" ]; then
809 $PERL ./Configure LIST | grep "$OUT" > /dev/null
810 if [ $? = "0" ]; then
811 echo Configuring for $OUT
813 if [ "$TEST" = "true" ]; then
814 echo $PERL ./Configure $OUT $options
816 $PERL ./Configure $OUT $options
819 echo "This system ($OUT) is not supported. See file INSTALL for details."