gpio: Add Rapid GPIO2P driver for i.MX7ULP
[oweals/u-boot.git] / cmd / bdinfo.c
1 /*
2  * (C) Copyright 2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*
9  * Boot support
10  */
11 #include <common.h>
12 #include <command.h>
13 #include <linux/compiler.h>
14
15 DECLARE_GLOBAL_DATA_PTR;
16
17 __maybe_unused
18 static void print_num(const char *name, ulong value)
19 {
20         printf("%-12s= 0x%08lX\n", name, value);
21 }
22
23 __maybe_unused
24 static void print_eth(int idx)
25 {
26         char name[10], *val;
27         if (idx)
28                 sprintf(name, "eth%iaddr", idx);
29         else
30                 strcpy(name, "ethaddr");
31         val = getenv(name);
32         if (!val)
33                 val = "(not set)";
34         printf("%-12s= %s\n", name, val);
35 }
36
37 #ifndef CONFIG_DM_ETH
38 __maybe_unused
39 static void print_eths(void)
40 {
41         struct eth_device *dev;
42         int i = 0;
43
44         do {
45                 dev = eth_get_dev_by_index(i);
46                 if (dev) {
47                         printf("eth%dname    = %s\n", i, dev->name);
48                         print_eth(i);
49                         i++;
50                 }
51         } while (dev);
52
53         printf("current eth = %s\n", eth_get_name());
54         printf("ip_addr     = %s\n", getenv("ipaddr"));
55 }
56 #endif
57
58 __maybe_unused
59 static void print_lnum(const char *name, unsigned long long value)
60 {
61         printf("%-12s= 0x%.8llX\n", name, value);
62 }
63
64 __maybe_unused
65 static void print_mhz(const char *name, unsigned long hz)
66 {
67         char buf[32];
68
69         printf("%-12s= %6s MHz\n", name, strmhz(buf, hz));
70 }
71
72
73 static inline void print_bi_boot_params(const bd_t *bd)
74 {
75         print_num("boot_params",        (ulong)bd->bi_boot_params);
76 }
77
78 static inline void print_bi_mem(const bd_t *bd)
79 {
80 #if defined(CONFIG_SH)
81         print_num("mem start      ",    (ulong)bd->bi_memstart);
82         print_lnum("mem size       ",   (u64)bd->bi_memsize);
83 #elif defined(CONFIG_ARC)
84         print_num("mem start",          (ulong)bd->bi_memstart);
85         print_lnum("mem size",          (u64)bd->bi_memsize);
86 #elif defined(CONFIG_AVR32)
87         print_num("memstart",           (ulong)bd->bi_dram[0].start);
88         print_lnum("memsize",           (u64)bd->bi_dram[0].size);
89 #else
90         print_num("memstart",           (ulong)bd->bi_memstart);
91         print_lnum("memsize",           (u64)bd->bi_memsize);
92 #endif
93 }
94
95 static inline void print_bi_dram(const bd_t *bd)
96 {
97 #ifdef CONFIG_NR_DRAM_BANKS
98         int i;
99
100         for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) {
101                 if (bd->bi_dram[i].size) {
102                         print_num("DRAM bank",  i);
103                         print_num("-> start",   bd->bi_dram[i].start);
104                         print_num("-> size",    bd->bi_dram[i].size);
105                 }
106         }
107 #endif
108 }
109
110 static inline void print_bi_flash(const bd_t *bd)
111 {
112 #if defined(CONFIG_MICROBLAZE) || defined(CONFIG_SH)
113         print_num("flash start    ",    (ulong)bd->bi_flashstart);
114         print_num("flash size     ",    (ulong)bd->bi_flashsize);
115         print_num("flash offset   ",    (ulong)bd->bi_flashoffset);
116
117 #elif defined(CONFIG_NIOS2) || defined(CONFIG_OPENRISC)
118         print_num("flash start",        (ulong)bd->bi_flashstart);
119         print_num("flash size",         (ulong)bd->bi_flashsize);
120         print_num("flash offset",       (ulong)bd->bi_flashoffset);
121 #else
122         print_num("flashstart",         (ulong)bd->bi_flashstart);
123         print_num("flashsize",          (ulong)bd->bi_flashsize);
124         print_num("flashoffset",        (ulong)bd->bi_flashoffset);
125 #endif
126 }
127
128 static inline void print_eth_ip_addr(void)
129 {
130 #if defined(CONFIG_CMD_NET)
131         print_eth(0);
132 #if defined(CONFIG_HAS_ETH1)
133         print_eth(1);
134 #endif
135 #if defined(CONFIG_HAS_ETH2)
136         print_eth(2);
137 #endif
138 #if defined(CONFIG_HAS_ETH3)
139         print_eth(3);
140 #endif
141 #if defined(CONFIG_HAS_ETH4)
142         print_eth(4);
143 #endif
144 #if defined(CONFIG_HAS_ETH5)
145         print_eth(5);
146 #endif
147         printf("IP addr     = %s\n", getenv("ipaddr"));
148 #endif
149 }
150
151 static inline void print_baudrate(void)
152 {
153 #if defined(CONFIG_PPC)
154         printf("baudrate    = %6u bps\n", gd->baudrate);
155 #elif defined(CONFIG_SPARC)
156         printf("baudrate               = %6u bps\n", gd->baudrate);
157 #else
158         printf("baudrate    = %u bps\n", gd->baudrate);
159 #endif
160 }
161
162 static inline void print_std_bdinfo(const bd_t *bd)
163 {
164         print_bi_boot_params(bd);
165         print_bi_mem(bd);
166         print_bi_flash(bd);
167         print_eth_ip_addr();
168         print_baudrate();
169 }
170
171 #if defined(CONFIG_PPC)
172 void __weak board_detail(void)
173 {
174         /* Please define boot_detail() for your platform */
175 }
176
177 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
178 {
179         bd_t *bd = gd->bd;
180
181 #ifdef DEBUG
182         print_num("bd address",         (ulong)bd);
183 #endif
184         print_bi_mem(bd);
185         print_bi_flash(bd);
186         print_num("sramstart",          bd->bi_sramstart);
187         print_num("sramsize",           bd->bi_sramsize);
188 #if     defined(CONFIG_5xx)  || defined(CONFIG_8xx) || \
189         defined(CONFIG_MPC8260) || defined(CONFIG_E500)
190         print_num("immr_base",          bd->bi_immr_base);
191 #endif
192         print_num("bootflags",          bd->bi_bootflags);
193 #if     defined(CONFIG_405EP) || \
194         defined(CONFIG_405GP) || \
195         defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
196         defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
197         defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
198         defined(CONFIG_XILINX_405)
199         print_mhz("procfreq",           bd->bi_procfreq);
200         print_mhz("plb_busfreq",        bd->bi_plb_busfreq);
201 #if     defined(CONFIG_405EP) || defined(CONFIG_405GP) || \
202         defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
203         defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
204         defined(CONFIG_440SPE) || defined(CONFIG_XILINX_405)
205         print_mhz("pci_busfreq",        bd->bi_pci_busfreq);
206 #endif
207 #else   /* ! CONFIG_405GP, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */
208 #if defined(CONFIG_CPM2)
209         print_mhz("vco",                bd->bi_vco);
210         print_mhz("sccfreq",            bd->bi_sccfreq);
211         print_mhz("brgfreq",            bd->bi_brgfreq);
212 #endif
213         print_mhz("intfreq",            bd->bi_intfreq);
214 #if defined(CONFIG_CPM2)
215         print_mhz("cpmfreq",            bd->bi_cpmfreq);
216 #endif
217         print_mhz("busfreq",            bd->bi_busfreq);
218 #endif /* CONFIG_405GP, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */
219
220 #ifdef CONFIG_ENABLE_36BIT_PHYS
221 #ifdef CONFIG_PHYS_64BIT
222         puts("addressing  = 36-bit\n");
223 #else
224         puts("addressing  = 32-bit\n");
225 #endif
226 #endif
227
228         print_eth_ip_addr();
229         print_baudrate();
230         print_num("relocaddr", gd->relocaddr);
231         board_detail();
232         return 0;
233 }
234
235 #elif defined(CONFIG_NIOS2)
236
237 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
238 {
239         bd_t *bd = gd->bd;
240
241         print_bi_dram(bd);
242         print_bi_flash(bd);
243
244 #if defined(CONFIG_SYS_SRAM_BASE)
245         print_num ("sram start",        (ulong)bd->bi_sramstart);
246         print_num ("sram size",         (ulong)bd->bi_sramsize);
247 #endif
248
249         print_eth_ip_addr();
250         print_baudrate();
251
252         return 0;
253 }
254
255 #elif defined(CONFIG_MICROBLAZE)
256
257 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
258 {
259         bd_t *bd = gd->bd;
260
261         print_bi_dram(bd);
262         print_bi_flash(bd);
263 #if defined(CONFIG_SYS_SRAM_BASE)
264         print_num("sram start     ",    (ulong)bd->bi_sramstart);
265         print_num("sram size      ",    (ulong)bd->bi_sramsize);
266 #endif
267 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH)
268         print_eths();
269 #endif
270         print_baudrate();
271         print_num("relocaddr", gd->relocaddr);
272         print_num("reloc off", gd->reloc_off);
273         print_num("fdt_blob", (ulong)gd->fdt_blob);
274         print_num("new_fdt", (ulong)gd->new_fdt);
275         print_num("fdt_size", (ulong)gd->fdt_size);
276
277         return 0;
278 }
279
280 #elif defined(CONFIG_SPARC)
281
282 int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
283 {
284         bd_t *bd = gd->bd;
285
286 #ifdef DEBUG
287         print_num("bd address             ", (ulong) bd);
288 #endif
289         print_num("memstart               ", bd->bi_memstart);
290         print_lnum("memsize                ", bd->bi_memsize);
291         print_num("flashstart             ", bd->bi_flashstart);
292         print_num("CONFIG_SYS_MONITOR_BASE       ", CONFIG_SYS_MONITOR_BASE);
293         print_num("CONFIG_ENV_ADDR           ", CONFIG_ENV_ADDR);
294         printf("CONFIG_SYS_RELOC_MONITOR_BASE = 0x%x (%d)\n", CONFIG_SYS_RELOC_MONITOR_BASE,
295                CONFIG_SYS_MONITOR_LEN);
296         printf("CONFIG_SYS_MALLOC_BASE        = 0x%x (%d)\n", CONFIG_SYS_MALLOC_BASE,
297                CONFIG_SYS_MALLOC_LEN);
298         printf("CONFIG_SYS_INIT_SP_OFFSET     = 0x%x (%d)\n", CONFIG_SYS_INIT_SP_OFFSET,
299                CONFIG_SYS_STACK_SIZE);
300         printf("CONFIG_SYS_PROM_OFFSET        = 0x%x (%d)\n", CONFIG_SYS_PROM_OFFSET,
301                CONFIG_SYS_PROM_SIZE);
302         printf("CONFIG_SYS_GBL_DATA_OFFSET    = 0x%x (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET,
303                GENERATED_GBL_DATA_SIZE);
304
305         print_eth_ip_addr();
306         print_baudrate();
307         return 0;
308 }
309
310 #elif defined(CONFIG_M68K)
311
312 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
313 {
314         bd_t *bd = gd->bd;
315
316         print_bi_mem(bd);
317         print_bi_flash(bd);
318 #if defined(CONFIG_SYS_INIT_RAM_ADDR)
319         print_num("sramstart",          (ulong)bd->bi_sramstart);
320         print_num("sramsize",           (ulong)bd->bi_sramsize);
321 #endif
322 #if defined(CONFIG_SYS_MBAR)
323         print_num("mbar",               bd->bi_mbar_base);
324 #endif
325         print_mhz("cpufreq",            bd->bi_intfreq);
326         print_mhz("busfreq",            bd->bi_busfreq);
327 #ifdef CONFIG_PCI
328         print_mhz("pcifreq",            bd->bi_pcifreq);
329 #endif
330 #ifdef CONFIG_EXTRA_CLOCK
331         print_mhz("flbfreq",            bd->bi_flbfreq);
332         print_mhz("inpfreq",            bd->bi_inpfreq);
333         print_mhz("vcofreq",            bd->bi_vcofreq);
334 #endif
335         print_eth_ip_addr();
336         print_baudrate();
337
338         return 0;
339 }
340
341 #elif defined(CONFIG_BLACKFIN)
342
343 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
344 {
345         bd_t *bd = gd->bd;
346
347         printf("U-Boot      = %s\n", bd->bi_r_version);
348         printf("CPU         = %s\n", bd->bi_cpu);
349         printf("Board       = %s\n", bd->bi_board_name);
350         print_mhz("VCO",        bd->bi_vco);
351         print_mhz("CCLK",       bd->bi_cclk);
352         print_mhz("SCLK",       bd->bi_sclk);
353
354         print_std_bdinfo(bd);
355
356         return 0;
357 }
358
359 #elif defined(CONFIG_MIPS)
360
361 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
362 {
363         print_std_bdinfo(gd->bd);
364         print_num("relocaddr", gd->relocaddr);
365         print_num("reloc off", gd->reloc_off);
366
367         return 0;
368 }
369
370 #elif defined(CONFIG_AVR32)
371
372 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
373 {
374         print_std_bdinfo(gd->bd);
375         return 0;
376 }
377
378 #elif defined(CONFIG_ARM)
379
380 static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
381                         char * const argv[])
382 {
383         bd_t *bd = gd->bd;
384
385         print_num("arch_number",        bd->bi_arch_number);
386         print_bi_boot_params(bd);
387         print_bi_dram(bd);
388
389 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
390         if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) {
391                 print_num("Secure ram",
392                           gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK);
393         }
394 #endif
395 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH)
396         print_eths();
397 #endif
398         print_baudrate();
399 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
400         print_num("TLB addr", gd->arch.tlb_addr);
401 #endif
402         print_num("relocaddr", gd->relocaddr);
403         print_num("reloc off", gd->reloc_off);
404         print_num("irq_sp", gd->irq_sp);        /* irq stack pointer */
405         print_num("sp start ", gd->start_addr_sp);
406 #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
407         print_num("FB base  ", gd->fb_base);
408 #endif
409         /*
410          * TODO: Currently only support for davinci SOC's is added.
411          * Remove this check once all the board implement this.
412          */
413 #ifdef CONFIG_CLOCKS
414         printf("ARM frequency = %ld MHz\n", gd->bd->bi_arm_freq);
415         printf("DSP frequency = %ld MHz\n", gd->bd->bi_dsp_freq);
416         printf("DDR frequency = %ld MHz\n", gd->bd->bi_ddr_freq);
417 #endif
418 #ifdef CONFIG_BOARD_TYPES
419         printf("Board Type  = %ld\n", gd->board_type);
420 #endif
421 #ifdef CONFIG_SYS_MALLOC_F
422         printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
423                CONFIG_SYS_MALLOC_F_LEN);
424 #endif
425
426         return 0;
427 }
428
429 #elif defined(CONFIG_SH)
430
431 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
432 {
433         bd_t *bd = gd->bd;
434
435         print_bi_mem(bd);
436         print_bi_flash(bd);
437         print_eth_ip_addr();
438         print_baudrate();
439         return 0;
440 }
441
442 #elif defined(CONFIG_X86)
443
444 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
445 {
446         bd_t *bd = gd->bd;
447
448         print_bi_boot_params(bd);
449
450         print_bi_dram(bd);
451
452 #if defined(CONFIG_CMD_NET)
453         print_eth_ip_addr();
454         print_mhz("ethspeed",       bd->bi_ethspeed);
455 #endif
456         print_baudrate();
457
458         return 0;
459 }
460
461 #elif defined(CONFIG_SANDBOX)
462
463 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
464 {
465         bd_t *bd = gd->bd;
466
467         print_bi_boot_params(bd);
468         print_bi_dram(bd);
469         print_eth_ip_addr();
470
471 #if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
472         print_num("FB base  ", gd->fb_base);
473 #endif
474         return 0;
475 }
476
477 #elif defined(CONFIG_NDS32)
478
479 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
480 {
481         bd_t *bd = gd->bd;
482
483         print_num("arch_number",        bd->bi_arch_number);
484         print_bi_boot_params(bd);
485         print_bi_dram(bd);
486         print_eth_ip_addr();
487         print_baudrate();
488
489         return 0;
490 }
491
492 #elif defined(CONFIG_OPENRISC)
493
494 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
495 {
496         bd_t *bd = gd->bd;
497
498         print_bi_mem(bd);
499         print_bi_flash(bd);
500         print_eth_ip_addr();
501         print_baudrate();
502
503         return 0;
504 }
505
506 #elif defined(CONFIG_ARC)
507
508 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
509 {
510         bd_t *bd = gd->bd;
511
512         print_bi_mem(bd);
513         print_eth_ip_addr();
514         print_baudrate();
515
516         return 0;
517 }
518
519 #elif defined(CONFIG_XTENSA)
520
521 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
522 {
523         print_std_bdinfo(gd->bd);
524         return 0;
525 }
526
527 #else
528  #error "a case for this architecture does not exist!"
529 #endif
530
531 /* -------------------------------------------------------------------- */
532
533 U_BOOT_CMD(
534         bdinfo, 1,      1,      do_bdinfo,
535         "print Board Info structure",
536         ""
537 );