2 * (C) Copyright 2007 Michal Simek
4 * Michal SIMEK <monstr@monstr.eu>
6 * See file CREDITS for list of people who contributed to this
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 /* This is a board specific file. It's OK to include board specific
31 #include <asm/processor.h>
32 #include <asm/microblaze_intc.h>
35 int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
37 #ifdef CONFIG_SYS_GPIO_0
38 *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) =
39 ++(*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)));
42 puts ("Reseting board\n");
43 __asm__ __volatile__ (" mts rmsr, r0;" \
51 #ifdef CONFIG_SYS_GPIO_0
52 *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = 0xFFFFFFFF;
62 int board_eth_init(bd_t *bis)
66 #ifdef CONFIG_XILINX_AXIEMAC
67 ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR,
68 XILINX_AXIDMA_BASEADDR);
71 #ifdef CONFIG_XILINX_EMACLITE
74 # ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
77 # ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
80 ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
84 #ifdef CONFIG_XILINX_LL_TEMAC
85 # ifdef XILINX_LLTEMAC_BASEADDR
86 # ifdef XILINX_LLTEMAC_FIFO_BASEADDR
87 ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
88 XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR);
89 # elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR
90 # if XILINX_LLTEMAC_SDMA_USE_DCR == 1
91 ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
92 XILINX_LL_TEMAC_M_SDMA_DCR,
93 XILINX_LLTEMAC_SDMA_CTRL_BASEADDR);
95 ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR,
96 XILINX_LL_TEMAC_M_SDMA_PLB,
97 XILINX_LLTEMAC_SDMA_CTRL_BASEADDR);
101 # ifdef XILINX_LLTEMAC_BASEADDR1
102 # ifdef XILINX_LLTEMAC_FIFO_BASEADDR1
103 ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
104 XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR1);
105 # elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1
106 # if XILINX_LLTEMAC_SDMA_USE_DCR == 1
107 ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
108 XILINX_LL_TEMAC_M_SDMA_DCR,
109 XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1);
111 ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1,
112 XILINX_LL_TEMAC_M_SDMA_PLB,
113 XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1);