3 * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
6 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
9 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
10 * Marius Groeger <mgroeger@sysgo.de>
12 * See file CREDITS for list of people who contributed to this
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License as
17 * published by the Free Software Foundation; either version 2 of
18 * the License, or (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
32 #include <asm/arch/hardware.h>
35 DECLARE_GLOBAL_DATA_PTR;
37 /* ------------------------------------------------------------------------- */
40 * Miscelaneous platform dependent initialisations
42 extern struct serial_device serial_ffuart_device;
43 extern struct serial_device serial_btuart_device;
44 extern struct serial_device serial_stuart_device;
46 struct serial_device *default_serial_console (void)
48 return &serial_ffuart_device;
53 /* memory and cpu-speed are setup before relocation */
54 /* so we do _nothing_ here */
56 /* arch number of vpac270 */
57 gd->bd->bi_arch_number = MACH_TYPE_VPAC270;
59 /* adress of boot parameters */
60 gd->bd->bi_boot_params = 0xa0000100;
67 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
68 gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
70 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
71 gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
76 int usb_board_init(void)
78 UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
79 ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
83 while (UHCHR & UHCHR_FSBIR);
86 UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
88 /* Clear any OTG Pin Hold */
89 if (PSSR & PSSR_OTGPH)
95 /* Set port power control mask bits, only 3 ports. */
99 UP2OCR |= UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
104 void usb_board_init_fail(void)
109 void usb_board_stop(void)
118 CKEN &= ~CKEN10_USBHOST;
123 #ifdef CONFIG_DRIVER_DM9000
124 int board_eth_init(bd_t *bis)
126 return dm9000_initialize(bis);