3 * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
5 * Copyright (C) 2009 TechNexion Ltd.
7 * SPDX-License-Identifier: GPL-2.0+
13 #include <asm/arch/mem.h>
14 #include <asm/arch/mux.h>
15 #include <asm/arch/sys_proto.h>
16 #include <asm/omap_gpio.h>
17 #include <asm/arch/mmc_host_def.h>
20 #ifdef CONFIG_USB_EHCI
22 #include <asm/ehci-omap.h>
26 DECLARE_GLOBAL_DATA_PTR;
28 /* Timing definitions for Ethernet Controller */
29 static const u32 gpmc_smc911[] = {
38 static const u32 gpmc_XR16L2751[] = {
39 XR16L2751_GPMC_CONFIG1,
40 XR16L2751_GPMC_CONFIG2,
41 XR16L2751_GPMC_CONFIG3,
42 XR16L2751_GPMC_CONFIG4,
43 XR16L2751_GPMC_CONFIG5,
44 XR16L2751_GPMC_CONFIG6,
47 #ifdef CONFIG_USB_EHCI
48 static struct omap_usbhs_board_data usbhs_bdata = {
49 .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
50 .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
51 .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
54 int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
56 return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
59 int ehci_hcd_stop(int index)
61 return omap_ehci_hcd_stop();
67 gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
70 gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
72 /* Chip select 1 and 3 are used for XR16L2751 UART controller */
73 enable_gpmc_cs_config(gpmc_XR16L2751, &gpmc_cfg->cs[1],
74 XR16L2751_UART1_BASE, GPMC_SIZE_16M);
76 enable_gpmc_cs_config(gpmc_XR16L2751, &gpmc_cfg->cs[3],
77 XR16L2751_UART2_BASE, GPMC_SIZE_16M);
79 gpio_request(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, "USB_PHY1_RESET");
80 gpio_direction_output(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, 1);
85 #ifndef CONFIG_SPL_BUILD
89 struct tam3517_module_info info;
94 eth_addr = getenv("ethaddr");
98 TAM3517_READ_EEPROM(&info, ret);
100 TAM3517_READ_MAC_FROM_EEPROM(&info);
107 * Routine: set_muxconf_regs
108 * Description: Setting up the configuration Mux registers specific to the
109 * hardware. Many pins need to be moved from protect to primary
112 void set_muxconf_regs(void)
117 int board_eth_init(bd_t *bis)
119 davinci_emac_initialize();
121 /* init cs for extern lan */
122 enable_gpmc_cs_config(gpmc_smc911, &gpmc_cfg->cs[5],
123 CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
124 if (smc911x_initialize(0, CONFIG_SMC911X_BASE) <= 0)
125 printf("\nError initializing SMC911x controlleri\n");
130 #if defined(CONFIG_OMAP_HSMMC) && \
131 !defined(CONFIG_SPL_BUILD)
132 int board_mmc_init(bd_t *bis)
134 return omap_mmc_init(0, 0, 0, -1, -1);
138 #ifdef CONFIG_SPL_OS_BOOT
140 * Do board specific preperation before SPL
143 void spl_board_prepare_for_linux(void)
145 /* init cs for extern lan */
146 enable_gpmc_cs_config(gpmc_smc911, &gpmc_cfg->cs[5],
147 CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
149 int spl_start_uboot(void)
152 if (!gpio_request(SPL_OS_BOOT_KEY, "U-Boot key")) {
153 gpio_direction_input(SPL_OS_BOOT_KEY);
154 val = gpio_get_value(SPL_OS_BOOT_KEY);
155 gpio_free(SPL_OS_BOOT_KEY);