2 bool "stboard - command for OTP board information"
3 depends on ARCH_STM32MP
4 default y if TARGET_ST_STM32MP15x
6 This compile the stboard command to
7 read and write the board in the OTP.
9 config MTDPARTS_NAND0_BOOT
10 string "mtd boot partitions for nand0"
11 default "2m(fsbl),2m(ssbl1),2m(ssbl2)"
12 depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
14 This define the partitions of nand0 used to build mtparts dynamically
16 Each partition need to be aligned with the device erase block size,
17 512KB is the max size for the NAND supported by stm32mp1 platform.
19 config MTDPARTS_NAND0_TEE
20 string "mtd tee partitions for nand0"
21 default "512k(teeh),512k(teed),512k(teex)"
22 depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
24 This define the tee partitions added in mtparts dynamically
25 when tee is supported with boot from nand0.
26 Each partition need to be aligned with the device erase block size,
27 512KB is the max size for the NAND supported by stm32mp1 platform.
29 config MTDPARTS_NOR0_BOOT
30 string "mtd boot partitions for nor0"
31 default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)"
32 depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
34 This define the partitions of nand0 used to build mtparts dynamically
36 Each partition need to be aligned with the device erase block size,
37 with 256KB we support all the NOR.
38 U-Boot env partition (512kB) use 2 erase block for redundancy.
40 config MTDPARTS_NOR0_TEE
41 string "mtd tee partitions for nor0"
42 default "256k(teeh),256k(teed),256k(teex)"
43 depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
45 This define the tee partitions added in mtparts dynamically
46 when tee is supported with boot from nor0.
48 config MTDPARTS_SPINAND0_BOOT
49 string "mtd boot partitions for spi-nand0"
50 default "2m(fsbl),2m(ssbl1),2m(ssbl2)"
51 depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
53 This define the partitions of nand0 used to build mtparts dynamically
54 for boot from spi-nand0,
55 512KB is the max size for the NAND supported by stm32mp1 platform.
57 config MTDPARTS_SPINAND0_TEE
58 string "mtd tee partitions for spi-nand0"
59 default "512k(teeh),512k(teed),512k(teex)"
60 depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
62 This define the tee partitions added in mtparts dynamically
63 when tee is supported with boot from spi-nand0,
64 512KB is the max size for the NAND supported by stm32mp1 platform.
68 default "uImage ram 0xc2000000 0x2000000;devicetree.dtb ram 0xc4000000 0x100000;uramdisk.image.gz ram 0xc4400000 0x10000000"
69 depends on ARCH_STM32MP && SET_DFU_ALT_INFO
71 This defines the partitions of ram used to build dfu dynamically.