Stop using immap_t for guts offset on 85xx
[oweals/u-boot.git] / board / sbc8560 / sbc8560.c
1 /*
2  * (C) Copyright 2003,Motorola Inc.
3  * Xianghua Xiao, (X.Xiao@motorola.com)
4  *
5  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
6  *
7  * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
8  * Added support for Wind River SBC8560 board
9  *
10  * See file CREDITS for list of people who contributed to this
11  * project.
12  *
13  * This program is free software; you can redistribute it and/or
14  * modify it under the terms of the GNU General Public License as
15  * published by the Free Software Foundation; either version 2 of
16  * the License, or (at your option) any later version.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  * GNU General Public License for more details.
22  *
23  * You should have received a copy of the GNU General Public License
24  * along with this program; if not, write to the Free Software
25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26  * MA 02111-1307 USA
27  */
28
29
30 extern long int spd_sdram (void);
31
32 #include <common.h>
33 #include <asm/processor.h>
34 #include <asm/immap_85xx.h>
35 #include <ioports.h>
36 #include <spd.h>
37 #include <miiphy.h>
38
39 long int fixed_sdram (void);
40
41 /*
42  * I/O Port configuration table
43  *
44  * if conf is 1, then that port pin will be configured at boot time
45  * according to the five values podr/pdir/ppar/psor/pdat for that entry
46  */
47
48 const iop_conf_t iop_conf_tab[4][32] = {
49
50     /* Port A configuration */
51     {   /*            conf ppar psor pdir podr pdat */
52         /* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
53         /* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
54         /* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
55         /* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
56         /* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
57         /* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
58         /* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
59         /* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
60         /* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
61         /* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
62         /* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
63         /* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
64         /* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
65         /* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
66         /* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
67         /* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
68         /* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
69         /* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
70         /* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
71         /* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
72         /* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
73         /* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
74         /* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
75         /* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
76         /* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
77         /* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
78         /* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
79         /* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
80         /* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
81         /* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
82         /* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
83         /* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
84     },
85
86     /* Port B configuration */
87     {   /*            conf ppar psor pdir podr pdat */
88         /* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
89         /* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
90         /* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
91         /* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
92         /* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
93         /* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
94         /* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
95         /* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
96         /* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
97         /* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
98         /* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
99         /* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
100         /* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
101         /* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
102         /* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
103         /* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
104         /* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
105         /* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
106         /* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
107         /* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
108         /* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
109         /* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
110         /* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
111         /* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
112         /* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
113         /* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
114         /* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
115         /* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
116         /* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
117         /* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
118         /* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
119         /* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
120     },
121
122     /* Port C */
123     {   /*            conf ppar psor pdir podr pdat */
124         /* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
125         /* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
126         /* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
127         /* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
128         /* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
129         /* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
130         /* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
131         /* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
132         /* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
133         /* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
134         /* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
135         /* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
136         /* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
137         /* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
138         /* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
139         /* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
140         /* PC15 */ {   1,   1,   0,   0,   0,   0   }, /* PC15 */
141         /* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
142         /* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
143         /* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
144         /* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
145         /* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FETHMDC */
146         /* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* FETHMDIO */
147         /* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
148         /* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
149         /* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
150         /* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
151         /* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
152         /* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
153         /* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
154         /* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
155         /* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
156     },
157
158     /* Port D */
159     {   /*            conf ppar psor pdir podr pdat */
160         /* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
161         /* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
162         /* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 RTS */
163         /* PD28 */ {   1,   1,   0,   0,   0,   0   }, /* SCC2 RxD */
164         /* PD27 */ {   1,   1,   1,   1,   0,   0   }, /* SCC2 TxD */
165         /* PD26 */ {   1,   1,   0,   1,   0,   0   }, /* SCC2 RTS */
166         /* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
167         /* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
168         /* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
169         /* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
170         /* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
171         /* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
172         /* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
173         /* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
174         /* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
175         /* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
176         /* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
177         /* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
178         /* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
179         /* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
180         /* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
181         /* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
182         /* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
183         /* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
184         /* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
185         /* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
186         /* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
187         /* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
188         /* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
189         /* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
190         /* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
191         /* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
192     }
193 };
194
195 int board_early_init_f (void)
196 {
197 #if defined(CONFIG_PCI)
198     volatile immap_t *immr = (immap_t *)CFG_IMMR;
199     volatile ccsr_pcix_t *pci = &immr->im_pcix;
200
201     pci->peer &= 0xfffffffdf; /* disable master abort */
202 #endif
203         return 0;
204 }
205
206 void reset_phy (void)
207 {
208 #if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
209         volatile unsigned char *bcsr = (unsigned char *) CFG_BCSR;
210 #endif
211         /* reset Giga bit Ethernet port if needed here */
212
213         /* reset the CPM FEC port */
214 #if (CONFIG_ETHER_INDEX == 2)
215         bcsr[0] &= ~0x20;
216         udelay(2);
217         bcsr[0] |= 0x20;
218         udelay(1000);
219 #elif (CONFIG_ETHER_INDEX == 3)
220         bcsr[0] &= ~0x10;
221         udelay(2);
222         bcsr[0] |= 0x10;
223         udelay(1000);
224 #endif
225 #if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
226         /* reset PHY */
227         miiphy_reset("FCC1 ETHERNET", 0x0);
228
229         /* change PHY address to 0x02 */
230         bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
231
232         bb_miiphy_write(NULL, 0x02, PHY_BMCR,
233                         PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
234 #endif /* CONFIG_MII */
235 }
236
237 int checkboard (void)
238 {
239         sys_info_t sysinfo;
240
241         get_sys_info (&sysinfo);
242
243 #ifdef CONFIG_SBC8560
244         printf ("Board: Wind River SBC8560 Board\n");
245 #else
246         printf ("Board: Wind River SBC8540 Board\n");
247 #endif
248         printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
249         printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
250         printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
251         if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
252                 || (CFG_LBC_LCRR & 0x0f) == 8) {
253                 printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f));
254         } else {
255                 printf("\tLBC: unknown\n");
256         }
257         printf("\tCPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
258         printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
259         return (0);
260 }
261
262
263 long int initdram (int board_type)
264 {
265         long dram_size = 0;
266         extern long spd_sdram (void);
267 #if 0
268 #if !defined(CONFIG_RAM_AS_FLASH)
269         volatile ccsr_lbc_t *lbc= &immap->im_lbc;
270         sys_info_t sysinfo;
271         uint temp_lbcdll = 0;
272 #endif
273 #endif /* 0 */
274 #if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
275         volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
276 #endif
277 #if defined(CONFIG_DDR_DLL)
278         uint temp_ddrdll = 0;
279
280         /* Work around to stabilize DDR DLL */
281         temp_ddrdll = gur->ddrdllcr;
282         gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
283         asm("sync;isync;msync");
284 #endif
285
286 #if defined(CONFIG_SPD_EEPROM)
287         dram_size = spd_sdram ();
288 #else
289         dram_size = fixed_sdram ();
290 #endif
291
292 #if 0
293 #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
294         get_sys_info(&sysinfo);
295         /* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
296         if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
297                 lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
298         } else {
299 #if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */
300                 lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */
301 #endif
302                 lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
303                 udelay(200);
304                 temp_lbcdll = gur->lbcdllcr;
305                 gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
306                 asm("sync;isync;msync");
307         }
308         lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
309         lbc->br2 = CFG_BR2_PRELIM;
310         lbc->lbcr = CFG_LBC_LBCR;
311         lbc->lsdmr = CFG_LBC_LSDMR_1;
312         asm("sync");
313         (unsigned int) * (ulong *)0 = 0x000000ff;
314         lbc->lsdmr = CFG_LBC_LSDMR_2;
315         asm("sync");
316         (unsigned int) * (ulong *)0 = 0x000000ff;
317         lbc->lsdmr = CFG_LBC_LSDMR_3;
318         asm("sync");
319         (unsigned int) * (ulong *)0 = 0x000000ff;
320         lbc->lsdmr = CFG_LBC_LSDMR_4;
321         asm("sync");
322         (unsigned int) * (ulong *)0 = 0x000000ff;
323         lbc->lsdmr = CFG_LBC_LSDMR_5;
324         asm("sync");
325         lbc->lsrt = CFG_LBC_LSRT;
326         asm("sync");
327         lbc->mrtpr = CFG_LBC_MRTPR;
328         asm("sync");
329 #endif
330 #endif
331
332 #if defined(CONFIG_DDR_ECC)
333         {
334                 /* Initialize all of memory for ECC, then
335                  * enable errors */
336                 uint *p = 0;
337                 uint i = 0;
338                 volatile immap_t *immap = (immap_t *)CFG_IMMR;
339                 volatile ccsr_ddr_t *ddr= &immap->im_ddr;
340                 dma_init();
341                 for (*p = 0; p < (uint *)(8 * 1024); p++) {
342                         if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
343                         *p = (unsigned int)0xdeadbeef;
344                         if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
345                 }
346
347                 /* 8K */
348                 dma_xfer((uint *)0x2000,0x2000,(uint *)0);
349                 /* 16K */
350                 dma_xfer((uint *)0x4000,0x4000,(uint *)0);
351                 /* 32K */
352                 dma_xfer((uint *)0x8000,0x8000,(uint *)0);
353                 /* 64K */
354                 dma_xfer((uint *)0x10000,0x10000,(uint *)0);
355                 /* 128k */
356                 dma_xfer((uint *)0x20000,0x20000,(uint *)0);
357                 /* 256k */
358                 dma_xfer((uint *)0x40000,0x40000,(uint *)0);
359                 /* 512k */
360                 dma_xfer((uint *)0x80000,0x80000,(uint *)0);
361                 /* 1M */
362                 dma_xfer((uint *)0x100000,0x100000,(uint *)0);
363                 /* 2M */
364                 dma_xfer((uint *)0x200000,0x200000,(uint *)0);
365                 /* 4M */
366                 dma_xfer((uint *)0x400000,0x400000,(uint *)0);
367
368                 for (i = 1; i < dram_size / 0x800000; i++) {
369                         dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
370                 }
371
372                 /* Enable errors for ECC */
373                 ddr->err_disable = 0x00000000;
374                 asm("sync;isync;msync");
375         }
376 #endif
377
378         return dram_size;
379 }
380
381
382 #if defined(CFG_DRAM_TEST)
383 int testdram (void)
384 {
385         uint *pstart = (uint *) CFG_MEMTEST_START;
386         uint *pend = (uint *) CFG_MEMTEST_END;
387         uint *p;
388
389         printf("SDRAM test phase 1:\n");
390         for (p = pstart; p < pend; p++)
391                 *p = 0xaaaaaaaa;
392
393         for (p = pstart; p < pend; p++) {
394                 if (*p != 0xaaaaaaaa) {
395                         printf ("SDRAM test fails at: %08x\n", (uint) p);
396                         return 1;
397                 }
398         }
399
400         printf("SDRAM test phase 2:\n");
401         for (p = pstart; p < pend; p++)
402                 *p = 0x55555555;
403
404         for (p = pstart; p < pend; p++) {
405                 if (*p != 0x55555555) {
406                         printf ("SDRAM test fails at: %08x\n", (uint) p);
407                         return 1;
408                 }
409         }
410
411         printf("SDRAM test passed.\n");
412         return 0;
413 }
414 #endif
415
416 #if !defined(CONFIG_SPD_EEPROM)
417 /*************************************************************************
418  *  fixed sdram init -- doesn't use serial presence detect.
419  ************************************************************************/
420 long int fixed_sdram (void)
421 {
422
423 #define CFG_DDR_CONTROL 0xc2000000
424
425   #ifndef CFG_RAMBOOT
426         volatile immap_t *immap = (immap_t *)CFG_IMMR;
427         volatile ccsr_ddr_t *ddr= &immap->im_ddr;
428
429         ddr->cs0_bnds           = 0x00000007;
430         ddr->cs1_bnds           = 0x0010001f;
431         ddr->cs2_bnds           = 0x00000000;
432         ddr->cs3_bnds           = 0x00000000;
433         ddr->cs0_config         = 0x80000102;
434         ddr->cs1_config         = 0x80000102;
435         ddr->cs2_config         = 0x00000000;
436         ddr->cs3_config         = 0x00000000;
437         ddr->timing_cfg_1       = 0x37334321;
438         ddr->timing_cfg_2       = 0x00000800;
439         ddr->sdram_cfg          = 0x42000000;
440         ddr->sdram_mode         = 0x00000022;
441         ddr->sdram_interval     = 0x05200100;
442         ddr->err_sbe            = 0x00ff0000;
443     #if defined (CONFIG_DDR_ECC)
444         ddr->err_disable = 0x0000000D;
445     #endif
446         asm("sync;isync;msync");
447         udelay(500);
448     #if defined (CONFIG_DDR_ECC)
449         /* Enable ECC checking */
450         ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
451     #else
452         ddr->sdram_cfg = CFG_DDR_CONTROL;
453     #endif
454         asm("sync; isync; msync");
455         udelay(500);
456   #endif
457         return CFG_SDRAM_SIZE * 1024 * 1024;
458 }
459 #endif  /* !defined(CONFIG_SPD_EEPROM) */